Allow readers to read consistently

This commit exposes a `read_at` on the block cache allowing callers to
read the same data from offset X over and over again. This means that
when we expose data from a block cache in the logrotate filesystem we
are able to correctly do `wc -l` and similar.

Signed-off-by: Brian L. Troutwine <[email protected]>

Author: blt

lading/src/bin/payloadtool.rs

@@ -46,7 +46,7 @@ fn generate_and_check(
     let start = Instant::now();
     let blocks =
         match block::Cache::fixed(&mut rng, total_bytes, max_block_size.get_bytes(), config)? {
-            block::Cache::Fixed { blocks, idx: _ } => blocks,
+            block::Cache::Fixed { blocks, .. } => blocks,
         };
     info!("Payload generation took {:?}", start.elapsed());
     debug!("Payload: {:#?}", blocks);

lading/src/generator/file_gen/model.rs

@@ -47,30 +47,6 @@ pub struct File {
 }
 
 impl File {
-    /// Returns the number of bytes available to be read at instance `now`.
-    ///
-    /// This function returns the number of bytes that have been "written" to
-    /// the `File` and are available to be read. For instance, `modified_tick`
-    /// may be in the past but sufficient bytes have accumulated in the file for
-    /// non-zero reads to remain possible. Bytes will not be noted as consumed
-    /// until the caller calls [`File::read`].
-    ///
-    /// Call to this file will advance `bytes_written` if `now` >
-    /// `modified_tick`.
-    ///
-    /// Returns 0 if `bytes_written` == `bytes_read`.
-    ///
-    /// # Panics
-    ///
-    /// Function will panic if `bytes_written` < `bytes_read`. This indicates a
-    /// catastrophic programming error.
-    pub fn available_to_read(&mut self, now: Tick) -> u64 {
-        self.advance_time(now);
-
-        assert!(self.bytes_written >= self.bytes_read);
-        self.bytes_written.saturating_sub(self.bytes_read)
-    }
-
     /// Register a read.
     ///
     /// This function is pair to [`File::available_to_read`]. It's possible that
@@ -89,16 +65,6 @@ impl File {
         self.status_tick = now;
     }
 
-    /// Register a read-only open.
-    ///
-    /// This function updates `access_time` to `now`. Time is advanced which may
-    /// result in more bytes being available in-file.
-    pub fn ro_open(&mut self, now: Tick) {
-        self.advance_time(now);
-
-        self.access_tick = now;
-    }
-
     /// Run the clock forward in the `File`.
     ///
     /// This function runs the clock forward to `now`, updating `modified_tick`
@@ -347,19 +313,23 @@ impl State {
                 name: _,
                 ref mut file,
             }) => {
-                let available = file.available_to_read(now);
-                if available == 0 {
-                    return None;
-                }
+                let bytes_written = usize::try_from(file.bytes_written)
+                    .expect("more bytes written than machine word");
 
-                let block_len = self.block_cache.peek_next().total_bytes.get() as usize;
-                if block_len <= size {
-                    let block = self.block_cache.next_block();
-                    file.read(block_len as u64, now);
-                    Some(block.bytes.clone())
-                } else {
-                    None
+                if offset >= bytes_written {
+                    // Offset beyond EOF
+                    return Some(Bytes::new());
                 }
+
+                let available = bytes_written.saturating_sub(offset);
+                let to_read = available.min(size);
+
+                // Get data from block_cache without worrying about blocks
+                let data = self.block_cache.read_at(offset as u64, to_read);
+
+                file.read(to_read as u64, now);
+
+                Some(data)
             }
             Some(Node::Directory { .. }) | None => None,
         }

lading_payload/src/block.rs

@@ -155,6 +155,8 @@ pub enum Cache {
         idx: usize,
         /// The store of blocks.
         blocks: Vec<Block>,
+        /// The amount of data stored in one cycle, or all blocks
+        total_cycle_size: u64,
     },
 }
 
@@ -323,7 +325,17 @@ impl Cache {
                 construct_block_cache_inner(rng, &pyld, maximum_block_bytes, total_bytes.get())?
             }
         };
-        Ok(Self::Fixed { idx: 0, blocks })
+
+        let total_cycle_size = blocks
+            .iter()
+            .map(|block| u64::from(block.total_bytes.get()))
+            .sum();
+
+        Ok(Self::Fixed {
+            idx: 0,
+            blocks,
+            total_cycle_size,
+        })
     }
 
     /// Run `Cache` forward on the user-provided mpsc sender.
@@ -339,7 +351,9 @@ impl Cache {
     #[allow(clippy::needless_pass_by_value)]
     pub fn spin(self, snd: Sender<Block>) -> Result<(), SpinError> {
         match self {
-            Self::Fixed { mut idx, blocks } => loop {
+            Self::Fixed {
+                mut idx, blocks, ..
+            } => loop {
                 snd.blocking_send(blocks[idx].clone())?;
                 idx = (idx + 1) % blocks.len();
             },
@@ -354,7 +368,7 @@ impl Cache {
     #[must_use]
     pub fn peek_next(&self) -> &Block {
         match self {
-            Self::Fixed { idx, blocks } => &blocks[*idx],
+            Self::Fixed { idx, blocks, .. } => &blocks[*idx],
         }
     }
 
@@ -367,13 +381,73 @@ impl Cache {
             Self::Fixed {
                 ref mut idx,
                 blocks,
+                ..
             } => {
                 let block = &blocks[*idx];
                 *idx = (*idx + 1) % blocks.len();
                 block
             }
         }
     }
+
+    /// Read data starting from a given offset and up to the specified size.
+    ///
+    /// # Panics
+    ///
+    /// Function will panic if reads are larger than machine word bytes wide.
+    pub fn read_at(&self, offset: u64, size: usize) -> Bytes {
+        let mut data = BytesMut::with_capacity(size);
+
+        let (blocks, total_cycle_size) = match self {
+            Cache::Fixed {
+                blocks,
+                total_cycle_size,
+                ..
+            } => (
+                blocks,
+                usize::try_from(*total_cycle_size)
+                    .expect("cycle size larger than machine word bytes"),
+            ),
+        };
+
+        let mut remaining = size;
+        let mut current_offset =
+            usize::try_from(offset).expect("offset larger than machine word bytes");
+
+        while remaining > 0 {
+            // Compute offset within the cycle
+            let offset_within_cycle = current_offset % total_cycle_size;
+
+            // Find which block this offset falls into
+            let mut block_start = 0;
+            for block in blocks {
+                let block_size = block.total_bytes.get() as usize;
+                if offset_within_cycle < block_start + block_size {
+                    // Offset is within this block
+                    let block_offset = offset_within_cycle - block_start;
+                    let bytes_in_block = (block_size - block_offset).min(remaining);
+
+                    data.extend_from_slice(
+                        &block.bytes[block_offset..block_offset + bytes_in_block],
+                    );
+
+                    remaining -= bytes_in_block;
+                    current_offset += bytes_in_block;
+                    break;
+                }
+                block_start += block_size;
+            }
+
+            // If we couldn't find a block this suggests something seriously
+            // wacky has happened.
+            if remaining > 0 && block_start >= total_cycle_size {
+                error!("Offset exceeds total cycle size");
+                break;
+            }
+        }
+
+        data.freeze()
+    }
 }
 
 /// Construct a new block cache of form defined by `serializer`.