language_gl.h

/**
 * Galician language (ISO "gl")
 *
 * LCD Menu Messages
 * Se also documentation/LCDLanguageFont.md
 *
 */
#ifndef LANGUAGE_GL_H
#define LANGUAGE_GL_H

#define MAPPER_C2C3
// Define SIMULATE_ROMFONT to see what is seen on the character based display defined in Configuration.h
//#define SIMULATE_ROMFONT
#define DISPLAY_CHARSET_ISO10646_1

#define WELCOME_MSG                         MACHINE_NAME " lista."
#define MSG_SD_INSERTED                     "Tarxeta inserida"
#define MSG_SD_REMOVED                      "Tarxeta retirada"
#define MSG_MAIN                            "Menu principal"
#define MSG_AUTOSTART                       "Autoarranque"
#define MSG_DISABLE_STEPPERS                "Apagar motores"
#define MSG_AUTO_HOME                       "Ir a orixe"
#define MSG_SET_ORIGIN                      "Fixar orixe"
#define MSG_PREHEAT_PLA                     "Prequentar PLA"
#define MSG_PREHEAT_PLA_N                   "Prequentar PLA "
#define MSG_PREHEAT_PLA_ALL                 "Preque. PLA Todo"
#define MSG_PREHEAT_PLA_BEDONLY             "Preque. PLA Cama"
#define MSG_PREHEAT_PLA_SETTINGS            "Preque. PLA conf"
#define MSG_PREHEAT_ABS                     "Prequentar ABS"
#define MSG_PREHEAT_ABS_N                   "Prequentar ABS "
#define MSG_PREHEAT_ABS_ALL                 "Preque. ABS Todo"
#define MSG_PREHEAT_ABS_BEDONLY             "Preque. ABS Cama"
#define MSG_PREHEAT_ABS_SETTINGS            "Preque. ABS conf"
#define MSG_COOLDOWN                        "Arrefriar"
#define MSG_SWITCH_PS_ON                    "Acender"
#define MSG_SWITCH_PS_OFF                   "Apagar"
#define MSG_EXTRUDE                         "Extrudir"
#define MSG_RETRACT                         "Retraer"
#define MSG_MOVE_AXIS                       "Mover eixe"
#define MSG_LEVEL_BED                       "Nivelar cama"
#define MSG_MOVE_X                          "Mover X"
#define MSG_MOVE_Y                          "Mover Y"
#define MSG_MOVE_Z                          "Mover Z"
#define MSG_MOVE_E                          "Extruir"
#define MSG_MOVE_01MM                       "Mover 0.1mm"
#define MSG_MOVE_1MM                        "Mover 1mm"
#define MSG_MOVE_10MM                       "Mover 10mm"
#define MSG_SPEED                           "Velocidade"
#define MSG_NOZZLE                          "Bico"
#define MSG_BED                             "Cama"
#define MSG_FAN_SPEED                       "Velocidade vent."
#define MSG_FLOW                            "Fluxo"
#define MSG_CONTROL                         "Control"
#define MSG_MIN                             " " LCD_STR_THERMOMETER " Min"
#define MSG_MAX                             " " LCD_STR_THERMOMETER " Max"
#define MSG_FACTOR                          " " LCD_STR_THERMOMETER " Fact"
#define MSG_AUTOTEMP                        "Autotemp"
#define MSG_ON                              "On "
#define MSG_OFF                             "Off"
#define MSG_PID_P                           "PID-P"
#define MSG_PID_I                           "PID-I"
#define MSG_PID_D                           "PID-D"
#define MSG_PID_C                           "PID-C"
#define MSG_E1                              " E1"
#define MSG_E2                              " E2"
#define MSG_E3                              " E3"
#define MSG_E4                              " E4"
#define MSG_ACC                             "Acel"
#define MSG_VXY_JERK                        "Vxy-jerk"
#define MSG_VZ_JERK                         "Vz-jerk"
#define MSG_VE_JERK                         "Ve-jerk"
#define MSG_VMAX                            "Vmax "
#define MSG_X                               "x"
#define MSG_Y                               "y"
#define MSG_Z                               "z"
#define MSG_E                               "e"
#define MSG_VMIN                            "Vmin"
#define MSG_VTRAV_MIN                       "VTrav min"
#define MSG_AMAX                            "Amax "
#define MSG_A_RETRACT                       "A-retract"
#define MSG_A_TRAVEL                        "A-travel"
#define MSG_XSTEPS                          "Xpasos/mm"
#define MSG_YSTEPS                          "Ypasos/mm"
#define MSG_ZSTEPS                          "Zpasos/mm"
#define MSG_ESTEPS                          "Epasos/mm"
#define MSG_TEMPERATURE                     "Temperatura"
#define MSG_MOTION                          "Movemento"
#define MSG_VOLUMETRIC                      "Filamento"
#define MSG_VOLUMETRIC_ENABLED              "E en mm3"
#define MSG_FILAMENT_DIAM                   "Diametro filam."
#define MSG_CONTRAST                        "Constraste LCD"
#define MSG_STORE_EPROM                     "Gardar en memo."
#define MSG_LOAD_EPROM                      "Cargar de memo."
#define MSG_RESTORE_FAILSAFE                "Cargar de firm."
#define MSG_REFRESH                         "Volver a cargar"
#define MSG_WATCH                           "Monitorizacion"
#define MSG_PREPARE                         "Preparar"
#define MSG_TUNE                            "Axustar"
#define MSG_PAUSE_PRINT                     "Pausar impres."
#define MSG_RESUME_PRINT                    "Seguir impres."
#define MSG_STOP_PRINT                      "Deter impres."
#define MSG_CARD_MENU                       "Tarxeta SD"
#define MSG_NO_CARD                         "Sen tarxeta SD"
#define MSG_DWELL                           "En repouso..."
#define MSG_USERWAIT                        "A espera..."
#define MSG_RESUMING                        "Imprimindo..."
#define MSG_PRINT_ABORTED                   "Impre. cancelada"
#define MSG_NO_MOVE                         "Sen movemento."
#define MSG_KILLED                          "PROGRAMA MORTO"
#define MSG_STOPPED                         "PROGRAMA PARADO"
#define MSG_CONTROL_RETRACT                 "Retraccion mm"
#define MSG_CONTROL_RETRACT_SWAP            "Cambio retra. mm"
#define MSG_CONTROL_RETRACTF                "Retraccion V"
#define MSG_CONTROL_RETRACT_ZLIFT           "Alzar Z mm"
#define MSG_CONTROL_RETRACT_RECOVER         "Recup. retra. mm"
#define MSG_CONTROL_RETRACT_RECOVER_SWAP    "Cambio recup. mm"
#define MSG_CONTROL_RETRACT_RECOVERF        "Recuperacion V"
#define MSG_AUTORETRACT                     "Retraccion auto."
#define MSG_FILAMENTCHANGE                  "Cambiar filamen."
#define MSG_INIT_SDCARD                     "Iniciando SD"
#define MSG_CNG_SDCARD                      "Cambiar SD"
#define MSG_ZPROBE_OUT                      "Sonda-Z sen cama"
#define MSG_POSITION_UNKNOWN                "X/Y antes que Z"
#define MSG_ZPROBE_ZOFFSET                  "Offset Z"
#define MSG_BABYSTEP_X                      "Micropaso X"
#define MSG_BABYSTEP_Y                      "Micropaso Y"
#define MSG_BABYSTEP_Z                      "Micropaso Z"
#define MSG_ENDSTOP_ABORT                   "Erro fin carro"
#define MSG_HEATING_FAILED_LCD              "Fallo quentando"
#define MSG_ERR_REDUNDANT_TEMP              "Erro temperatura"
#define MSG_THERMAL_RUNAWAY                 "Temp. excesiva"
#define MSG_ERR_MAXTEMP                     "Err: temp. max."
#define MSG_ERR_MINTEMP                     "Err: temp. min."
#define MSG_ERR_MAXTEMP_BED                 "Err: MAXTEMP BED"
#define MSG_ERR_MINTEMP_BED                 "Err: MINTEMP BED"
#define MSG_END_HOUR                        "horas"
#define MSG_END_MINUTE                      "minutos"
#define MSG_HEATING                         "Quentando..."
#define MSG_HEATING_COMPLETE                "Xa esta quente"
#define MSG_BED_HEATING                     "Quentando cama"
#define MSG_BED_DONE                        "Cama esta quente"

#if ENABLED(DELTA_CALIBRATION_MENU)
  #define MSG_DELTA_CALIBRATE             "Calibracion Delta"
  #define MSG_DELTA_CALIBRATE_X           "Calibrar X"
  #define MSG_DELTA_CALIBRATE_Y           "Calibrar Y"
  #define MSG_DELTA_CALIBRATE_Z           "Calibrar Z"
  #define MSG_DELTA_CALIBRATE_CENTER      "Calibrar Centro"
#endif // DELTA_CALIBRATION_MENU

#endif // LANGUAGE_GL_H