Reset Circuit with 2 Diodes not working with VS1053b?

[HoerMirAuf]

First, thank you for this great Project.

I build my WebRadio without Display and 3 Button usage on GPIO2, GPIO15, GPIO0
The both Diodes from VS1053B-Reset to GND Result to a not working VS1053b

Set the VS1053b-Reset up to 5V by a 10K Resistor an all working well.

Is this a bug in the circuit? Or why this not working if the Diodes connected to GND?

[Derek-K]

Check your wiring again. XRST with 1k pull down to GND, and the two diodes connect to GPIO 16 & GPIO 5.

The diodes acted as OR gate. During normal operations, XCS and/or XDCS will be high, so XRST will always high. The only time goes low is when XCS & XDCS goes low during init (line 575-577)

Esp-radio/Esp_radio.ino

Lines 575 to 577 in 56e57fc

	dbgprint ( "Reset VS1053..." ) ;
	digitalWrite ( dcs_pin, LOW ) ; // Low & Low will bring reset pin low
	digitalWrite ( cs_pin, LOW ) ;

BTW, if I am not mistaken VS1053B is a 3.3V part, pull up to 5V might damage it in the long run.