Tighten amr-wind tolerances in reg tests

Author: marchdf

Diff for: test/test_files/abl-bndry-input/abl-amr-bndry-input.inp

@@ -80,3 +80,8 @@ zhi.temperature = 0.0
 #              VERBOSITY                #
 #.......................................#
 incflo.verbose          =   0          # incflo_level
+
+nodal_proj.mg_rtol = 1.0e-12
+nodal_proj.mg_atol = 1.0e-12
+mac_proj.mg_rtol = 1.0e-12
+mac_proj.mg_atol = 1.0e-12

Diff for: test/test_files/abl-bndry-output/abl-amr-bndry-output.inp

@@ -73,3 +73,7 @@ zhi.temperature = 0.0
 #              VERBOSITY                #
 #.......................................#
 incflo.verbose          =   0          # incflo_level
+nodal_proj.mg_rtol = 1.0e-12
+nodal_proj.mg_atol = 1.0e-12
+mac_proj.mg_rtol = 1.0e-12
+mac_proj.mg_atol = 1.0e-12

Diff for: test/test_files/amr-nalu-cylinder-motion/cylinder-amr.inp

@@ -54,7 +54,9 @@ amrex.signal_handling = 0
 
 mac_proj.verbose = 0
 nodal_proj.verbose = 0
-nodal_proj.mg_rtol = 1.0e-6
-nodal_proj.mg_atol = 1.0e-10
+nodal_proj.mg_rtol = 1.0e-12
+nodal_proj.mg_atol = 1.0e-12
+mac_proj.mg_rtol = 1.0e-12
+mac_proj.mg_atol = 1.0e-12
 nodal_proj.num_pre_smooth = 10
 nodal_proj.num_post_smooth = 10

Diff for: test/test_files/amr-nalu-cylinder/cylinder-amr.inp

@@ -54,7 +54,9 @@ amrex.signal_handling = 0
 
 mac_proj.verbose = 0
 nodal_proj.verbose = 0
-nodal_proj.mg_rtol = 1.0e-6
-nodal_proj.mg_atol = 1.0e-10
+nodal_proj.mg_rtol = 1.0e-12
+nodal_proj.mg_atol = 1.0e-12
+mac_proj.mg_rtol = 1.0e-12
+mac_proj.mg_atol = 1.0e-12
 nodal_proj.num_pre_smooth = 10
 nodal_proj.num_post_smooth = 10

Diff for: test/test_files/ctv/ctv-amr1.inp

@@ -56,7 +56,9 @@ CTV.activate_pressure = 1
 CTV.error_log_file = "ctv1.log"
 incflo.verbose=4
 nodal_proj.verbose = 0
-nodal_proj.mg_rtol = 1.0e-6
-nodal_proj.mg_atol = 1.0e-10
+nodal_proj.mg_rtol = 1.0e-12
+nodal_proj.mg_atol = 1.0e-12
+mac_proj.mg_rtol = 1.0e-12
+mac_proj.mg_atol = 1.0e-12
 nodal_proj.num_pre_smooth = 10
 nodal_proj.num_post_smooth = 10

Diff for: test/test_files/ctv/ctv-amr2.inp

@@ -56,7 +56,9 @@ CTV.activate_pressure = 1
 CTV.error_log_file = "ctv2.log"
 incflo.verbose=4
 nodal_proj.verbose = 0
-nodal_proj.mg_rtol = 1.0e-6
-nodal_proj.mg_atol = 1.0e-10
+nodal_proj.mg_rtol = 1.0e-12
+nodal_proj.mg_atol = 1.0e-12
+mac_proj.mg_rtol = 1.0e-12
+mac_proj.mg_atol = 1.0e-12
 nodal_proj.num_pre_smooth = 10
 nodal_proj.num_post_smooth = 10

Diff for: test/test_files/ctv/ctv-amr3.inp

@@ -56,7 +56,9 @@ CTV.activate_pressure = 1
 CTV.error_log_file = "ctv3.log"
 incflo.verbose=4
 nodal_proj.verbose = 0
-nodal_proj.mg_rtol = 1.0e-6
-nodal_proj.mg_atol = 1.0e-10
+nodal_proj.mg_rtol = 1.0e-12
+nodal_proj.mg_atol = 1.0e-12
+mac_proj.mg_rtol = 1.0e-12
+mac_proj.mg_atol = 1.0e-12
 nodal_proj.num_pre_smooth = 10
 nodal_proj.num_post_smooth = 10

Diff for: test/test_files/dam-break-block/dam-break-block-amr.inp

@@ -16,6 +16,10 @@ transport.viscosity_fluid1=1.e-5
 transport.viscosity_fluid2=1.e-5
 turbulence.model = Laminar
 
+nodal_proj.mg_rtol = 1.0e-12
+nodal_proj.mg_atol = 1.0e-12
+mac_proj.mg_rtol = 1.0e-12
+mac_proj.mg_atol = 1.0e-12
 nodal_proj.max_coarsening_level = 0
 mac_proj.max_coarsening_level = 2
 

Diff for: test/test_files/flat-surface/flat-surface-amr.inp

@@ -44,4 +44,8 @@ yhi.type =   "slip_wall"
 zlo.type =   "slip_wall"
 zhi.type =   "slip_wall"
 
-incflo.verbose          =   0          # incflo_level
+incflo.verbose          =   0          # incflo_level
+nodal_proj.mg_rtol = 1.0e-12
+nodal_proj.mg_atol = 1.0e-12
+mac_proj.mg_rtol = 1.0e-12
+mac_proj.mg_atol = 1.0e-12

Diff for: test/test_files/hybrid-multi-cylinder/cylinder-amr.inp

@@ -54,7 +54,9 @@ amrex.signal_handling = 0
 
 mac_proj.verbose = 0
 nodal_proj.verbose = 0
-nodal_proj.mg_rtol = 1.0e-6
-nodal_proj.mg_atol = 1.0e-10
+nodal_proj.mg_rtol = 1.0e-12
+nodal_proj.mg_atol = 1.0e-12
+mac_proj.mg_rtol = 1.0e-12
+mac_proj.mg_atol = 1.0e-12
 nodal_proj.num_pre_smooth = 10
 nodal_proj.num_post_smooth = 10

Diff for: test/test_files/linear-waves/linear-waves-amr.inp

@@ -47,6 +47,10 @@ incflo.initial_iterations = 0
 incflo.do_initial_proj = false
 
 incflo.diffusion_type = 0
+nodal_proj.mg_rtol = 1.0e-12
+nodal_proj.mg_atol = 1.0e-12
+mac_proj.mg_rtol = 1.0e-12
+mac_proj.mg_atol = 1.0e-12
 nodal_proj.max_coarsening_level = 2
 mac_proj.max_coarsening_level = 6
 

Diff for: test/test_files/sloshing-tank/sloshing-tank-amr.inp

@@ -18,6 +18,10 @@ transport.viscosity_fluid1=1e-5
 transport.viscosity_fluid2=1e-5
 turbulence.model = Laminar
 
+nodal_proj.mg_rtol = 1.0e-12
+nodal_proj.mg_atol = 1.0e-12
+mac_proj.mg_rtol = 1.0e-12
+mac_proj.mg_atol = 1.0e-12
 mac_proj.max_coarsening_level = 2
 nodal_proj.max_coarsening_level = 2
 

Diff for: test/test_files/sphere/sphere-amr.inp

@@ -62,7 +62,9 @@ amrex.signal_handling = 0
 
 mac_proj.verbose = 0
 nodal_proj.verbose = 0
-nodal_proj.mg_rtol = 1.0e-6
-nodal_proj.mg_atol = 1.0e-10
+nodal_proj.mg_rtol = 1.0e-12
+nodal_proj.mg_atol = 1.0e-12
+mac_proj.mg_rtol = 1.0e-12
+mac_proj.mg_atol = 1.0e-12
 nodal_proj.num_pre_smooth = 10
 nodal_proj.num_post_smooth = 10

Diff for: test/test_files/stokes-waves-cylinder/stokes-waves-cylinder-amr.inp

@@ -38,6 +38,10 @@ ICNS.source_terms = GravityForcing
 ICNS.use_perturb_pressure = true
 ICNS.reconstruct_true_pressure = true
 
+nodal_proj.mg_rtol = 1.0e-12
+nodal_proj.mg_atol = 1.0e-12
+mac_proj.mg_rtol = 1.0e-12
+mac_proj.mg_atol = 1.0e-12
 mac_proj.num_pre_smooth = 8
 mac_proj.num_post_smooth = 8
 mac_proj.bottom_solver = hypre

Diff for: test/test_files/zalesak/zalesak-amr.inp

@@ -51,3 +51,7 @@ geometry.is_periodic    =   1   1   1     # Periodicity x y z (0/1)
 #.......................................#
 incflo.verbose          =   0          # incflo_level
 MultiPhase.verbose      =   1
+nodal_proj.mg_rtol = 1.0e-12
+nodal_proj.mg_atol = 1.0e-12
+mac_proj.mg_rtol = 1.0e-12
+mac_proj.mg_atol = 1.0e-12