Merge pull request #13587 from chrisda/chrisda

Standardize parameter descriptions (batch 4)

Author: chrisda

exchange/exchange-ps/ExchangePowerShell/New-PartnerApplication.md

@@ -170,8 +170,6 @@ Accept wildcard characters: False
 
 > Applicable: Exchange Server 2013
 
-This parameter is available only in Exchange Server 2013.
-
 This parameter is reserved for internal Microsoft use.
 
 ```yaml
@@ -190,8 +188,6 @@ Accept wildcard characters: False
 
 > Applicable: Exchange Server 2013
 
-This parameter is available only in Exchange Server 2013.
-
 This parameter is reserved for internal Microsoft use.
 
 ```yaml
@@ -210,10 +206,10 @@ Accept wildcard characters: False
 
 > Applicable: Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
 
-The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.
+The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on whether the cmdlet requires confirmation before proceeding.
 
 - Destructive cmdlets (for example, Remove-\* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax: `-Confirm:$false`.
-- Most other cmdlets (for example, New-\* and Set-\* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.
+- Most other cmdlets (for example, New-\* and Set-\* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you to acknowledge the command before proceeding.
 
 ```yaml
 Type: SwitchParameter
@@ -269,8 +265,6 @@ Accept wildcard characters: False
 
 > Applicable: Exchange Server 2013
 
-This parameter is available only in Exchange Server 2013.
-
 This parameter is reserved for internal Microsoft use.
 
 ```yaml
@@ -349,7 +343,7 @@ Accept wildcard characters: False
 
 > Applicable: Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
 
-The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.
+The WhatIf switch shows what the command does without making any changes. You don't need to specify a value with this switch.
 
 ```yaml
 Type: SwitchParameter

exchange/exchange-ps/ExchangePowerShell/New-PhishSimOverridePolicy.md

@@ -84,10 +84,10 @@ Accept wildcard characters: False
 
 > Applicable: Exchange Online
 
-The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.
+The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on whether the cmdlet requires confirmation before proceeding.
 
 - Destructive cmdlets (for example, Remove-\* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax: `-Confirm:$false`.
-- Most other cmdlets (for example, New-\* and Set-\* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.
+- Most other cmdlets (for example, New-\* and Set-\* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you to acknowledge the command before proceeding.
 
 ```yaml
 Type: SwitchParameter
@@ -164,9 +164,7 @@ Accept wildcard characters: False
 
 > Applicable: Exchange Online
 
-In Exchange Online PowerShell, the WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.
-
-The WhatIf switch doesn't work in Security & Compliance PowerShell.
+The WhatIf switch shows what the command does without making any changes. You don't need to specify a value with this switch.
 
 ```yaml
 Type: SwitchParameter

exchange/exchange-ps/ExchangePowerShell/New-PolicyTipConfig.md

@@ -97,10 +97,10 @@ Accept wildcard characters: False
 
 > Applicable: Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
 
-The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.
+The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on whether the cmdlet requires confirmation before proceeding.
 
 - Destructive cmdlets (for example, Remove-\* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax: `-Confirm:$false`.
-- Most other cmdlets (for example, New-\* and Set-\* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.
+- Most other cmdlets (for example, New-\* and Set-\* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you to acknowledge the command before proceeding.
 
 ```yaml
 Type: SwitchParameter
@@ -138,7 +138,7 @@ Accept wildcard characters: False
 
 > Applicable: Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
 
-The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.
+The WhatIf switch shows what the command does without making any changes. You don't need to specify a value with this switch.
 
 ```yaml
 Type: SwitchParameter

exchange/exchange-ps/ExchangePowerShell/New-PowerShellVirtualDirectory.md

@@ -93,10 +93,10 @@ Accept wildcard characters: False
 
 > Applicable: Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
 
-The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.
+The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on whether the cmdlet requires confirmation before proceeding.
 
 - Destructive cmdlets (for example, Remove-\* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax: `-Confirm:$false`.
-- Most other cmdlets (for example, New-\* and Set-\* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.
+- Most other cmdlets (for example, New-\* and Set-\* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you to acknowledge the command before proceeding.
 
 ```yaml
 Type: SwitchParameter
@@ -304,7 +304,7 @@ Accept wildcard characters: False
 
 > Applicable: Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
 
-The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.
+The WhatIf switch shows what the command does without making any changes. You don't need to specify a value with this switch.
 
 ```yaml
 Type: SwitchParameter

exchange/exchange-ps/ExchangePowerShell/New-ProtectionAlert.md

@@ -252,10 +252,10 @@ Accept wildcard characters: False
 
 > Applicable: Security & Compliance
 
-The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.
+The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on whether the cmdlet requires confirmation before proceeding.
 
 - Destructive cmdlets (for example, Remove-\* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax: `-Confirm:$false`.
-- Most other cmdlets (for example, New-\* and Set-\* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.
+- Most other cmdlets (for example, New-\* and Set-\* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you to acknowledge the command before proceeding.
 
 ```yaml
 Type: SwitchParameter

exchange/exchange-ps/ExchangePowerShell/New-PublicFolder.md

@@ -88,10 +88,10 @@ Accept wildcard characters: False
 
 > Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
 
-The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.
+The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on whether the cmdlet requires confirmation before proceeding.
 
 - Destructive cmdlets (for example, Remove-\* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax: `-Confirm:$false`.
-- Most other cmdlets (for example, New-\* and Set-\* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.
+- Most other cmdlets (for example, New-\* and Set-\* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you to acknowledge the command before proceeding.
 
 ```yaml
 Type: SwitchParameter
@@ -194,8 +194,6 @@ Accept wildcard characters: False
 
 > Applicable: Exchange Server 2010
 
-This parameter is available only in Exchange Server 2010.
-
 The Server parameter specifies the Mailbox server where you want to create the new public folder. You can use any value that uniquely identifies the server. For example:
 
 - Name
@@ -221,7 +219,7 @@ Accept wildcard characters: False
 
 > Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
 
-The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.
+The WhatIf switch shows what the command does without making any changes. You don't need to specify a value with this switch.
 
 ```yaml
 Type: SwitchParameter

exchange/exchange-ps/ExchangePowerShell/New-PublicFolderDatabase.md

@@ -92,10 +92,10 @@ Accept wildcard characters: False
 
 > Applicable: Exchange Server 2010
 
-The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.
+The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on whether the cmdlet requires confirmation before proceeding.
 
 - Destructive cmdlets (for example, Remove-\* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax: `-Confirm:$false`.
-- Most other cmdlets (for example, New-\* and Set-\* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.
+- Most other cmdlets (for example, New-\* and Set-\* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you to acknowledge the command before proceeding.
 
 ```yaml
 Type: SwitchParameter
@@ -167,7 +167,7 @@ Accept wildcard characters: False
 
 > Applicable: Exchange Server 2010
 
-The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.
+The WhatIf switch shows what the command does without making any changes. You don't need to specify a value with this switch.
 
 ```yaml
 Type: SwitchParameter

exchange/exchange-ps/ExchangePowerShell/New-PublicFolderDatabaseRepairRequest.md

@@ -97,10 +97,10 @@ Accept wildcard characters: False
 
 > Applicable: Exchange Server 2010
 
-The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.
+The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on whether the cmdlet requires confirmation before proceeding.
 
 - Destructive cmdlets (for example, Remove-\* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax: `-Confirm:$false`.
-- Most other cmdlets (for example, New-\* and Set-\* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.
+- Most other cmdlets (for example, New-\* and Set-\* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you to acknowledge the command before proceeding.
 
 ```yaml
 Type: SwitchParameter
@@ -154,7 +154,7 @@ Accept wildcard characters: False
 
 > Applicable: Exchange Server 2010
 
-The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.
+The WhatIf switch shows what the command does without making any changes. You don't need to specify a value with this switch.
 
 ```yaml
 Type: SwitchParameter

exchange/exchange-ps/ExchangePowerShell/New-PublicFolderMigrationRequest.md

@@ -181,10 +181,10 @@ Accept wildcard characters: False
 
 > Applicable: Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
 
-The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.
+The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on whether the cmdlet requires confirmation before proceeding.
 
 - Destructive cmdlets (for example, Remove-\* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax: `-Confirm:$false`.
-- Most other cmdlets (for example, New-\* and Set-\* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.
+- Most other cmdlets (for example, New-\* and Set-\* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you to acknowledge the command before proceeding.
 
 ```yaml
 Type: SwitchParameter
@@ -448,7 +448,7 @@ Accept wildcard characters: False
 
 > Applicable: Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
 
-The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.
+The WhatIf switch shows what the command does without making any changes. You don't need to specify a value with this switch.
 
 ```yaml
 Type: SwitchParameter

exchange/exchange-ps/ExchangePowerShell/New-PublicFolderMoveRequest.md

@@ -205,10 +205,10 @@ Accept wildcard characters: False
 
 > Applicable: Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
 
-The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.
+The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on whether the cmdlet requires confirmation before proceeding.
 
 - Destructive cmdlets (for example, Remove-\* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax: `-Confirm:$false`.
-- Most other cmdlets (for example, New-\* and Set-\* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.
+- Most other cmdlets (for example, New-\* and Set-\* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you to acknowledge the command before proceeding.
 
 ```yaml
 Type: SwitchParameter
@@ -414,7 +414,7 @@ Accept wildcard characters: False
 
 > Applicable: Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
 
-The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.
+The WhatIf switch shows what the command does without making any changes. You don't need to specify a value with this switch.
 
 ```yaml
 Type: SwitchParameter