diff --git a/content/getting-started/first-run-linux/_index.en.md b/content/getting-started/first-run-linux/_index.en.md
index 56f6abb..7bfd52b 100644
--- a/content/getting-started/first-run-linux/_index.en.md
+++ b/content/getting-started/first-run-linux/_index.en.md
@@ -12,7 +12,7 @@ Congratulations, your SD card should be now ready for boot! Safely remove your S
 Insert your USB cable into the "DATA" port, which is shown in the image above, and connect it to your PC. The green LED on your Pi should start blinking quickly for a while, that means it is starting up. In the meantime, you can enable Bluetooth and Hotspot on your phone, so you can get up and running. The process of booting up for the first time can take few minutes or up to tens of minutes depending on your SD card and your pwnagotchi's CPU, so give it a little while. In the meantime, you can make yourself a coffee, have a snack, or join our [Discord](https://discord.gg/PgaU3Vp) community and get to know the most amazing people!
 
 ## SSH into your pi
-This example is based on Manjaro OS with Xfce desktop envorinment however this should be similar, if not the same, on other distrobutions. First, open terminal and type in `ifconfig -a`. You should see a list of ethernet interfaces active. Take note of what are available, in my case, I have `eno1` and `lo` (the `lo` interface will always be there, as it is a loopback virtual adapter, other distrobutions might differ in naming however this is highly unlikely). Then, connect your pwny and wait for it to boot. Run `ifconfig -a` again, and you should see a new interface, in my case it was named `enp0s20f0u2u2`, that is your pwny. Take note of that.
+This example is based on Manjaro OS with Xfce desktop envorinment however this should be similar, if not the same, on other distrobutions. First, open terminal and type in `ip -o link show | awk -F': ' '{print $2}'`. You should see a list of ethernet interfaces active. Take note of what are available, in my case, I have `eno1` and `lo` (the `lo` interface will always be there, as it is a loopback virtual adapter, other distributions might differ in naming however this is highly unlikely). Then, connect your pwny and wait for it to boot. Run `ip -o link show | awk -F': ' '{print $2}'` again, and you should see a new interface, in my case it was named `enp0s20f0u2u2`, that is your pwny. Take note of that.
 
 Open your Network Manager, you should see a window like this, the amount and names of connections will probably differ but that is okay:
 
@@ -29,3 +29,23 @@ After that, head over to "IPv4 Settings", change method to "Manual" and enter de
 ![Network Manager IPv4 settings](https://github.com/pwndevelopers/community-wiki/assets/21370314/64ba6e9f-e11e-4e18-a420-5b280ca713c0)
 
 After that, you can save and your connection should work. Open the terminal, and type in `ssh <username>@10.0.0.2`, where `<username>` is whatever username you have specified in the Imager. If you haven't, the default is `pi`. Enter the password you have specified in the Imager, if you haven't, then the default is `raspberry`.
+
+## Connection sharing
+
+To share internet connection from your computer to your pwnagotchi, all you have to do is download this [script](https://raw.githubusercontent.com/jayofelony/pwnagotchi/master/scripts/linux_connection_share.sh) using the following command:
+
+```sh
+wget https://raw.githubusercontent.com/jayofelony/pwnagotchi/master/scripts/linux_connection_share.sh
+```
+
+Once downloaded, you should run it with `sudo` (check the source before doing that), passing the pwnagotchi's interface as the first argument and your computer's network interface as the second argument, like this:
+
+```sh
+sudo ./linux_connection_share.sh enp0s20f0u2u2 eno1 # WARNING: change the parameters name using your interfaces' names!
+```
+
+After that, your pwnagotchi should be able to connect to internet via USB connection. The script adds some iptables rules to your computer so the packets coming from pwnagotchi's interface are forwarded to your internet connected interface.
+
+### Common issues
+
+**> After computer reboot, my Pwnagotchi doesn't connect to internet anymore:** the solution to this problem is running the same process above again using the new interface name because Pwnagotchi has rebooted and the interface name has changed or the iptables rules have been cleared.
\ No newline at end of file