Replies: 6 comments 7 replies
-
|
Happend to me too. Didn´t get it to work since then. After a restart of the inverter it worked for a few minutes but now again no data. Thank you home-assistant_solaredge_modbus_multi_2023-09-13T20-39-20.911Z.log |
Beta Was this translation helpful? Give feedback.
-
|
I'm seeing this as well. My data stopped on Saturday, September 9th. I wonder if this is related to a SolarEdge firmware update. https://www.solaredge.com/en/support/setapp-inverters-firmware#Released32 |
Beta Was this translation helpful? Give feedback.
-
|
That may very well be the case: my inverter did not send it's data to the 'mySolarEdge' platform either between sunrise and this noon 14h30, when I rebooted it to try to reconnect the integration which failed round 12h40. |
Beta Was this translation helpful? Give feedback.
-
|
I see in mySolarEdge that 'Last update' was yesterday 23h26. |
Beta Was this translation helpful? Give feedback.
-
|
It's working fine for me, so I can't duplicate the issue. |
Beta Was this translation helpful? Give feedback.
-
|
What firmware version is your inverter currently on? |
Beta Was this translation helpful? Give feedback.
-
|
0004.0014.0229 |
Beta Was this translation helpful? Give feedback.
-
|
It looks like I'm actually still on version 4.17.221 (April 2023). So I guess it's not a firmware update issue. |
Beta Was this translation helpful? Give feedback.
-
|
I just realized I was still on an older version of solaredge-modbus-multi. After updating to version 2.4.5, I was able to reestablish my Modbus/TCP connectivity. |
Beta Was this translation helpful? Give feedback.
-
|
I'm on 4.18.32, the version just released. |
Beta Was this translation helpful? Give feedback.
-
|
I also have this issue. It happened the moment I tried to install the two last HA updates. |
Beta Was this translation helpful? Give feedback.
-
|
Your version is too old. 2.4.5 is a required update for Home Assistant 2023.9.1 due to changes in pymodbus. You must update to HA 2023.9.1 or higher before this update will appear in HACS |
Beta Was this translation helpful? Give feedback.
-
|
You are... totally right. I had not seen the pending update of
HACS/Modbus-multi after trying the updates.
I have updated all the system components, everything is working as
expected.
Thanks!
…On Tue, 26 Sept 2023 at 16:42, Seth ***@***.***> wrote:
Your version is too old. 2.4.5 is a required update for Home Assistant
2023.9.1 due to changes in pymodbus.
You must update to HA 2023.9.1 or higher before this update will appear in
HACS
—
Reply to this email directly, view it on GitHub
<#437 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ADRZHU3C5GMBZIUEBQLNE33X4LSTRANCNFSM6AAAAAA4XDEUEQ>
.
You are receiving this because you commented.Message ID:
<WillCodeForCats/solaredge-modbus-multi/repo-discussions/437/comments/7113749
@github.com>
|
Beta Was this translation helpful? Give feedback.
Uh oh!
There was an error while loading. Please reload this page.
-
Describe the bug
No connection.
Error:
Deze fout is ontstaan door een aangepaste integratie.
Logger: pymodbus.logging
Source: custom_components/solaredge_modbus_multi/hub.py:454
Integration: SolarEdge Modbus Multi (documentation, issues)
First occurred: 16:32:05 (52 occurrences)
Last logged: 17:26:39
Failed to connect [Errno 111] Connect call failed ('192.168.1.36', 1502)
Failed to connect
Expected behavior
Connection
Screenshots
Diagnostic File
NA
Debug logs
Deze fout is ontstaan door een aangepaste integratie. Logger: pymodbus.logging Source: custom_components/solaredge_modbus_multi/hub.py:454 Integration: SolarEdge Modbus Multi (documentation, issues) First occurred: 16:32:05 (52 occurrences) Last logged: 17:26:39 Failed to connect [Errno 111] Connect call failed ('192.168.1.36', 1502) Failed to connectHome Assistant Version
2023.9.2
solaredge-modbus-multi Version
2.4.5
Installation Type
HAOS
Read the Instructions
Additional Context
No response
Beta Was this translation helpful? Give feedback.
All reactions