sample_board_config.yaml

#####
# ESPHome Layout Control
# Sample Board Configuration
# Use this as your starting point

esphome:
  name: sta-bd-01

# Randomly delay the boot of the ESP from 3 to 10 seconds
  on_boot:
    - priority: 600
      then:
        - lambda: |-
            int random_delay = random(3000, 10001);  // milliseconds
            ESP_LOGI("main", "Delaying boot for %d milliseconds", random_delay);
            int delay_step = 100; // 100 ms delay steps to feed the watchdog
            for (int i = 0; i < random_delay / delay_step; i++) {
              delay(delay_step);
              // Feed the watchdog
              App.feed_wdt();
            }
            // Handle the remainder of the delay
            delay(random_delay % delay_step);
            ESP_LOGI("main", "Boot delay completed, continuing initialization");

# the type of board. If you bought the 38 pin one on my README, you don't need to change this.
esp32:
  board: nodemcu-32s

# We selectively enable/disable logging components here.
logger:
  level: DEBUG
  logs:
    number: NONE # required to be at DEBUG when you are calibrating servos
    block_sensors: INFO
    # upstream components we dont care about
    servo: NONE
    ledc: DEBUG
    esp32.preferences: NONE
    binary_sensor: NONE
    sensor: DEBUG
    # service logging

# This is where we import component-specific configuration. For each template you bring across and modify,
# simply uncomment a line that matches the file you copied.
# if you have multiple files - simply make the key (the left hand side of the colon) unique for each file.
# the reason for chunking this up is to make it easier to read and group similar bits of code together.

packages:
  #gpio: !include sta-bd-01/gpio_01.yaml
  #servos_01:  !include sta-bd-01/servos_01.yaml
  #signals: !include kia-bd-01/wled_signal.yaml

# Configure the connection to MQTT. JMRI also connects to this server, and this is
# how your ESPHome nodes and JMRI will exchange messages.
mqtt:
  broker: !secret layout_mqtt_broker_ip # connect to the layout control MQTT Broker.
  id: mqtt_server
  discovery: false
  on_message:
    - topic: /trains/track/turnout/ADM/ResetESPs
      payload: "THROWN"
      then:
        - button.press: reboot_esp

# Over-The-Air (OTA) updates allow you to update config on your ESPs once they are registered on your
# Dashboard. A very useful feature especially for things like Servo configuration which
# can be done wirelessly whilst still installed in the layout.
ota:
  password: !secret ota_password # connecting back to the esphome dashboard
  safe_mode: false

# lastly the wifi connection. We can't talk to anything unless we're on the network

wifi:
  ssid: !secret layout_wifi_ssid
  password: !secret layout_wifi_password
  power_save_mode: none

button:
  - platform: restart
    id: reboot_esp
    name: "ESP Restart"