Decoder for FanJu temperature/humidity remote sensor

This repo contains a decoder for the RF protocol, which is used by FanJu (https://de.aliexpress.com/item/32858575543.html).
There a 2 implementations, one for Arduino and one for the Pi.
To recieve the signal, you can either use a TI CC1101 or the cheap XY-MK-5v. Just connect the GD0/GD2 line or DATA line to D2 on the Arduino or GPIO25 on the Pi.

The Pi version contains also a MQTT forwarder and the ability to read a local DHT11.