update retired sku

Author: Matteo-it

Diff for: content/retired/01.boards/arduino-101-619/content.md

@@ -3,19 +3,19 @@ title: "Arduino 101"
 description: "Arduino 101 combine the ease-of-use of the classic boards with the latest technologies. The board recognises gestures, and features a six-axis accelerometer and gyroscope. Control your projects with your phone over Bluetooth® connectivity!"
 url_guide: "https://www.arduino.cc/en/Guide/Arduino101"
 coverImage: "assets/ABX00005_featured_2.jpg"
-sku: "ABX00005"
+sku: [ABX00005]
 source: "https://store.arduino.cc/arduino-101-619"
 ---
 
 ![The Arduino 101 board](./assets/ABX00005_featured_2.jpg)
 
-A learning and development board that delivers the performance and low-power consumption of the [Intel® Curie™](/resources/datasheets/intel-curie-module-datasheet.pdf) Module with the simplicity of Arduino at an entry-level price. It keeps the same robust form factor and peripheral list of the UNO with the addition of onboard Bluetooth® Low Energy capabilities and a 6-axis accelerometer/gyro to help you easily expand your creativity into the connected world. 
+A learning and development board that delivers the performance and low-power consumption of the [Intel® Curie™](/resources/datasheets/intel-curie-module-datasheet.pdf) Module with the simplicity of Arduino at an entry-level price. It keeps the same robust form factor and peripheral list of the UNO with the addition of onboard Bluetooth® Low Energy capabilities and a 6-axis accelerometer/gyro to help you easily expand your creativity into the connected world.
 
 The module contains two tiny cores, an x86 (Quark) and a [32-bit ARC](https://en.wikipedia.org/wiki/ARC_(processor)) architecture core, both clocked at 32MHz. The Intel toolchain compiles your Arduino sketches optimally across both cores to accomplish the most demanding tasks. The Real-Time Operating Systems (RTOS) and framework developed by Intel is open sourced. See below under Firmware for the download link. The Arduino core communicates with the RTOS via static mailboxes to accomplish a predefined list of tasks (interface with PC using USB, program the sketch into flash, expose Bluetooth® Low Energy functionality to sketch, perform PWM). The RTOS for Intel Curie is still under development and new functions and features will be released in the near future.
 
-The 101 comes with 14 digital input/output pins (of which 4 can be used as PWM outputs), 6 analog inputs, a USB connector for serial communication and sketch upload, a power jack, an ICSP header with SPI signals and I2C dedicated pins. The board operating voltage and I/O is 3.3V but all pins are protected against 5V overvoltage. 
+The 101 comes with 14 digital input/output pins (of which 4 can be used as PWM outputs), 6 analog inputs, a USB connector for serial communication and sketch upload, a power jack, an ICSP header with SPI signals and I2C dedicated pins. The board operating voltage and I/O is 3.3V but all pins are protected against 5V overvoltage.
 
-The Arduino 101 has been designed in collaboration with Intel®. 
+The Arduino 101 has been designed in collaboration with Intel®.
 
 ## Getting Started
 
@@ -33,7 +33,7 @@ In the [Getting Started section](https://www.arduino.cc/en/Guide/Arduino101), yo
 
 The 101 is open-source hardware! You can build your own board using the following files:
 
-[CAD FILES IN .ZIP](https://content.arduino.cc/assets/Arduino101-reference.zip) 
+[CAD FILES IN .ZIP](https://content.arduino.cc/assets/Arduino101-reference.zip)
 
 [SCHEMATICS IN .PDF](https://www.arduino.cc/en/uploads/Main/Arduino101-REV4Schematic.pdf)
 

Diff for: content/retired/01.boards/arduino-esplora/content.md

@@ -3,7 +3,7 @@ title: "Arduino Esplora"
 description: "The Arduino Esplora is an Arduino Leonardo based board with integrated sensors and actuators"
 url_guide: "https://www.arduino.cc/en/Guide/ArduinoEsplora"
 coverImage: "assets/A000095_featured_2.png"
-sku: "A000095"
+sku: [A000095]
 source: "https://store.arduino.cc/arduino-esplora"
 ---
 
@@ -43,7 +43,7 @@ In the [Getting Started section](https://www.arduino.cc/en/Guide/ArduinoEsplora)
 
 Arduino Esplora is open-source hardware! You can build your own board using the following files:
 
-[EAGLE FILES IN .ZIP](https://www.arduino.cc/en/uploads/Main/arduino-esplora-reference-design.zip) 
+[EAGLE FILES IN .ZIP](https://www.arduino.cc/en/uploads/Main/arduino-esplora-reference-design.zip)
 
 [SCHEMATICS IN DSN](https://www.arduino.cc/en/uploads/Main/arduino-esplora-schematic.pdf)
 

Diff for: content/retired/01.boards/arduino-ethernet-rev3-with-poe/content.md

@@ -2,7 +2,7 @@
 title: "Arduino Ethernet Rev3 with PoE"
 description: "An Arduino Uno incorporating a WizNet W5100 TCP IP Ethernet Controller."
 coverImage: "assets/a000074_featured.jpg"
-sku: "A000074"
+sku: [A000074]
 source: "https://store.arduino.cc/arduino-ethernet-rev3-with-poe"
 ---
 
@@ -43,7 +43,7 @@ This version has the power-over-Ethernet (PoE) module soldered to the board to p
 
 Arduino Ethernet Shield is open-source hardware. However the schematics or eagle files for the POE addon are currently unavailable. You can build your own Ethernet shield using the following files:
 
-[EAGLE FILES IN .ZIP](https://www.arduino.cc/en/uploads/Main/arduino-ethernet-R3-reference-design.zip) 
+[EAGLE FILES IN .ZIP](https://www.arduino.cc/en/uploads/Main/arduino-ethernet-R3-reference-design.zip)
 
 [SCHEMATICS IN .PDF](https://www.arduino.cc/en/uploads/Main/arduino-ethernet-R3-schematic.pdf)
 
@@ -142,7 +142,7 @@ If you want to use a FTDI cable to download your sketches on the Arduino Etherne
 |Input Voltage Plug (limits)                    |6-20V|
 |Input Voltage PoE (limits)                     |36-57V|
 |Digital I/O Pins                               |14 (of which 4 provide PWM output)|
-|Arduino Pins reserved:                         ||   
+|Arduino Pins reserved:                         ||
 |                                               | 10 to 13 used for SPI|
 |                                               |4 used for SD card|
 |                                               |2 W5100 interrupt (when bridged)|

Diff for: content/retired/01.boards/arduino-ethernet-rev3-without-poe/content.md

@@ -2,7 +2,7 @@
 title: "Arduino Ethernet Rev3 without PoE"
 description: "An Arduino Uno incorporating a WizNet W5100 TCP IP Ethernet Controller."
 coverImage: "assets/A000068_featured_2.jpg"
-sku: "A000068"
+sku: [A000068]
 source: "https://store.arduino.cc/arduino-ethernet-rev3-without-poe"
 ---
 
@@ -43,7 +43,7 @@ A separate power-over-Ethernet (PoE) module can be soldered to the board to prov
 
 Arduino Ethernet is open-source hardware! You can build your own board using the following files:
 
-[EAGLE FILES IN .ZIP](https://www.arduino.cc/en/uploads/Main/arduino-ethernet-R3-reference-design.zip) 
+[EAGLE FILES IN .ZIP](https://www.arduino.cc/en/uploads/Main/arduino-ethernet-R3-reference-design.zip)
 
 [SCHEMATICS IN .PDF](https://www.arduino.cc/en/uploads/Main/arduino-ethernet-R3-schematic.pdf)
 
@@ -73,7 +73,7 @@ The optional PoE module is designed to extract power from a conventional twisted
 * High efficiency DC/DC converter: typ 75% @ 50% load
 * 1500V isolation (input to output)
 
-*NB: the Power over Ethernet module is proprietary hardware not made by Arduino, it is a third party accessory. For more information, see the [datasheet](https://www.arduino.cc/en/uploads/Main/PoE-datasheet.pdf)* 
+*NB: the Power over Ethernet module is proprietary hardware not made by Arduino, it is a third party accessory. For more information, see the [datasheet](https://www.arduino.cc/en/uploads/Main/PoE-datasheet.pdf)*
 
 When using the power adapter, power can come either from an AC-to-DC adapter (wall-wart) or battery. The adapter can be connected by plugging a 2.1mm center-positive plug into the board's power jack. Leads from a battery can be inserted in the Gnd and Vin pin headers of the POWER connector. The board can operate on an external supply of 6 to 20 volts. If supplied with less than 7V, however, the 5V pin may supply less than five volts and the board may be unstable. If using more than 12V, the voltage regulator may overheat and damage the board. The recommended range is 7 to 12 volts.
 

Diff for: content/retired/01.boards/arduino-gemma/content.md

@@ -3,7 +3,7 @@ title: "Arduino Gemma"
 description: "Arduino Gemma is a miniature wearable microcontroller board based on the ATtiny85"
 url_guide: "https://www.arduino.cc/en/Guide/ArduinoGemma"
 coverImage: "assets/ABX00001_featured_2.jpg"
-sku: "ABX00001"
+sku: [ABX00001]
 source: "https://store.arduino.cc/arduino-gemma"
 ---
 
@@ -28,7 +28,7 @@ In the [Getting Started section](https://www.arduino.cc/en/Guide/ArduinoGemma),
 
 Arduino Gemma is open-source hardware! You can build your own board using the following files:
 
-[EAGLE FILES IN .ZIP](https://www.arduino.cc/en/uploads/Main/arduino-gemma-reference-design.zip) 
+[EAGLE FILES IN .ZIP](https://www.arduino.cc/en/uploads/Main/arduino-gemma-reference-design.zip)
 
 [SCHEMATICS IN .PDF](https://www.arduino.cc/en/uploads/Main/arduino-gemma-schematic.pdf)
 
@@ -69,8 +69,8 @@ The Arduino Gemma can be programmed with the Arduino [Arduino Software](https://
 
 The ATtiny85 on the Gemma comes preburned with a [bootloader](https://www.arduino.cc/en/Hacking/Bootloader?from=Tutorial.Bootloader) that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the AVR109 protocol.
 
-You can also bypass the bootloader and program the microcontroller through the SPI pins. The bottom of the board has a large pad that is connected to the Reset pin, you can use it soldering a wire to it.  
-  
+You can also bypass the bootloader and program the microcontroller through the SPI pins. The bottom of the board has a large pad that is connected to the Reset pin, you can use it soldering a wire to it.
+
 *Note: Some computers' USB v3 ports don't recognize the Gemma's bootloader. Simply use a USB v2 port or a USB Hub in between.*
 
 ### Reset and Bootloader Initiation

Diff for: content/retired/01.boards/arduino-industrial-101/content.md

@@ -3,7 +3,7 @@ title: "Arduino Industrial 101"
 description: "The Industrial 101 is a small form-factor YUN designed for product integration."
 url_guide: "https://www.arduino.cc/en/Guide/ArduinoIndustrial101"
 coverImage: "assets/A000126_ArduinoIndustrial101_featured_2.jpg"
-sku: "A000126"
+sku: [A000126]
 source: "https://store.arduino.cc/arduino-industrial-101"
 ---
 
@@ -29,7 +29,7 @@ You can find in the [Getting Started section](https://www.arduino.cc/en/Guide/Ho
 
 The Arduino Industrial 101 is open-source hardware! You can build your own board using the following files:
 
-[DSN FILES IN .ZIP](https://www.arduino.cc/en/uploads/Main/INDUSTRIAL101-V022-20151105.DSN.zip) 
+[DSN FILES IN .ZIP](https://www.arduino.cc/en/uploads/Main/INDUSTRIAL101-V022-20151105.DSN.zip)
 
 [SCHEMATICS IN .PDF](https://www.arduino.cc/en/uploads/Main/industrial-101-V022-20151105_SCH-1.pdf)
 
@@ -78,11 +78,11 @@ Digital pins 0 and 1 , not reported on final layout , are used for serial commun
 
 Arduino Ciao is an easy-to-use and powerful technology that enables Arduino sketches to communicate intuitively with the "outside World". It aims to simplify interaction between microcontroller and Linino OS, allowing a variety of connections with most common protocols, third-party services and social networks.
 
-Ciao has been designed and developed to be modular and easily configurable. Its goal is to support several connectors capable of interacting with the system resources (filesystem, console, memory) and to communicate with the most common and useful protocols (XMPP, HTTP, WebSocket, COAP, etc..) and applications (Jabber, WeChat, Twitter, Facebook, etc.). Ciao Library is a lightweight library that can be used inside sketches for MCU to send and receive data, via serial communication, in a simple and intuitive way. The SoftwareSerial library allows to use digital pins to transmit and receive data. The library relies on change interrupt pins to receive data, therefore only the pins that support that can be used as RX pins. On the Industrial 101 this type of pins are available on the ICSP connector and are mapped as follows:   
+Ciao has been designed and developed to be modular and easily configurable. Its goal is to support several connectors capable of interacting with the system resources (filesystem, console, memory) and to communicate with the most common and useful protocols (XMPP, HTTP, WebSocket, COAP, etc..) and applications (Jabber, WeChat, Twitter, Facebook, etc.). Ciao Library is a lightweight library that can be used inside sketches for MCU to send and receive data, via serial communication, in a simple and intuitive way. The SoftwareSerial library allows to use digital pins to transmit and receive data. The library relies on change interrupt pins to receive data, therefore only the pins that support that can be used as RX pins. On the Industrial 101 this type of pins are available on the ICSP connector and are mapped as follows:
 
-SCK = 15  
-MOSI = 16  
-MISO = 14   
+SCK = 15
+MOSI = 16
+MISO = 14
 
 You can create up to 3 SoftwareSerial ports using the pins 13, 5 and 6 for TX and 14, 15 and 16 for RX. .
 
@@ -118,7 +118,7 @@ The maximum length and width of the Industrial 101 PCB are 2.0 and 1.7 inches re
 
 ## Tech Specs
 
-**Arduino Microprocessor** 
+**Arduino Microprocessor**
 
 |                  |                                           |
 | ---------------- | ----------------------------------------- |

Diff for: content/retired/01.boards/arduino-isp/content.md

@@ -3,7 +3,7 @@ title: "Arduino ISP"
 description: "The Arduino ISP is a tool to directly program your microcontroller through the ICSP connector."
 url_guide: "https://www.arduino.cc/en/Main.ArduinoISP"
 coverImage: "assets/A000092_last_featured_2.jpg"
-sku: "A000092"
+sku: [A000092]
 source: "https://store.arduino.cc/arduino-isp"
 ---
 
@@ -29,21 +29,21 @@ You can find in the [Getting Started section](https://www.arduino.cc/en/Guide/Ho
 
 Arduino ISP is open-source hardware! You can build your own board using the following files:
 
-[EAGLE FILES IN .ZIP](https://content.arduino.cc/assets/arduino-isp-reference-design.zip) 
+[EAGLE FILES IN .ZIP](https://content.arduino.cc/assets/arduino-isp-reference-design.zip)
 
-[SCHEMATICS IN .PDF](https://content.arduino.cc/assets/arduino-isp-schematic.pdf) 
+[SCHEMATICS IN .PDF](https://content.arduino.cc/assets/arduino-isp-schematic.pdf)
 
 [WINDOWS DRIVERS](https://www.arduino.cc/en/uploads/Main/ArduinoISP_WindowsDrivers.zip)
 
 ### How to use
 
 Connect the Arduino ISP to your Arduino board's ICSP headers. Make sure to match the orientation of the plugs by looking at the white dot on the corner of the connector. Once connected, open the Arduino IDE and select "Arduino ISP" under the *"Tools > Programmers"*menu. To upload a sketch using the Arduino ISP, choose *"Upload using programmer"* option in the*File* menu, or use the keyboard shortcut: *"CTRL+SHIFT+U"*. If you want to burn the bootloader into the AVR microcontroller select the "Burn bootloader" option under the *"Tools"* menu.
 
-**Note:** The Arduino ISP is only supported by Arduino IDE 1.5.7 or later.  
+**Note:** The Arduino ISP is only supported by Arduino IDE 1.5.7 or later.
 
 For more details about using the Arduino ISP please visit the [Getting Started](https://www.arduino.cc/en/Guide/ArduinoISP) page
 
-### Tutorials 
+### Tutorials
 
 * [Using an Arduino as an AVR ISP](https://www.arduino.cc/en/Tutorial/ArduinoISP): how to use an Arduino board as an AVR ISP (in-system programmer). This allows you to use the board to burn the bootloader onto an AVR (e.g. theATmega168 or ATmega328 used in Arduino).
 * [Programming an ATtiny with Arduino ISP](http://scuola.arduino.cc/courses/lessons/cover/qX1117g): How to install the ATtiny core for the Arduino IDE for programming AVR ATtiny microcontrollers using the Arduino software and the Arduino ISP programmer.

Diff for: content/retired/01.boards/arduino-leonardo-eth-2-with-poe/content.md

@@ -2,7 +2,7 @@
 title: "Arduino Leonardo ETH 2 with PoE"
 description: "All the fun of a Leonardo, plus an Ethernet port to extend your project to the IoT world."
 coverImage: "assets/a000023_featured_1.jpg"
-sku: "A000023"
+sku: [A000023]
 source: "https://store.arduino.cc/arduino-leonardo-eth-2-with-poe"
 ---
 
@@ -16,6 +16,6 @@ The Arduino Leonardo ETH is the Leonardo with a built-in ethernet controller (Wi
 
 The Arduino Leonardo ETH is open-source hardware! You can build your own board using the following files (Please note that the schematics are revision 1):
 
-[EAGLE FILES IN .ZIP](https://content.arduino.cc/assets/LeonardoEth_V1.0.zip) 
+[EAGLE FILES IN .ZIP](https://content.arduino.cc/assets/LeonardoEth_V1.0.zip)
 
 [SCHEMATICS IN .PDF](https://content.arduino.cc/assets/LeonardoEth_V1.0_sch.pdf)

Diff for: content/retired/01.boards/arduino-leonardo-eth/content.md

@@ -3,7 +3,7 @@ title: "Arduino Leonardo ETH"
 description: "All the fun of a Leonardo, plus an Ethernet port to extend your project to the IoT world. You can control sensors and actuators via the internet as a client or server."
 url_guide: "https://www.arduino.cc/en/Guide/ArduinoLeonardoETH"
 coverImage: "assets/A000022_ArduinoLeonardoETH_front_2.jpg"
-sku: "A000022"
+sku: [A000022]
 source: "https://store.arduino.cc/arduino-leonardo-eth"
 ---
 
@@ -34,7 +34,7 @@ You can find in the [Getting Started section](https://www.arduino.cc/en/Guide/Ho
 
 The Arduino Leonardo ETH is open-source hardware! You can build your own board using the following files (Please note that the schematics are revision 1):
 
-[EAGLE FILES IN .ZIP](https://content.arduino.cc/assets/LeonardoEth_V1.0.zip) 
+[EAGLE FILES IN .ZIP](https://content.arduino.cc/assets/LeonardoEth_V1.0.zip)
 
 [SCHEMATICS IN .PDF](https://content.arduino.cc/assets/LeonardoEth_V1.0_sch.pdf)
 

Diff for: content/retired/01.boards/arduino-m0-pro/content.md

@@ -3,7 +3,7 @@ title: "Arduino M0 Pro"
 description: "The Arduino M0 Pro is an Arduino M0 with a step-by-step debugger"
 url_guide: "https://www.arduino.cc/en/Guide/ArduinoM0PRO"
 coverImage: "assets/a000111_featured_1.jpg"
-sku: "A000111"
+sku: [A000111]
 source: "https://store.arduino.cc/m0-pro"
 ---
 

Diff for: content/retired/01.boards/arduino-m0/content.md

@@ -3,7 +3,7 @@ title: "Arduino M0"
 description: "The Arduino M0 gives you the power of a 32-bit microcontroller."
 url_guide: "https://www.arduino.cc/en/Guide/ArduinoM0"
 coverImage: "assets/a000103_featured.jpg"
-sku: "A000103"
+sku: [A000103]
 source: "https://store.arduino.cc/arduino-m0"
 ---
 
@@ -29,7 +29,7 @@ You can find in the [Getting Started section](https://www.arduino.cc/en/Guide/Ho
 
 The Arduino M0 is open-source hardware! You can build your own board using the following files:
 
-[EAGLE FILES IN .ZIP](https://www.arduino.cc/en/uploads/Main/arduino-M0-reference-design.zip) 
+[EAGLE FILES IN .ZIP](https://www.arduino.cc/en/uploads/Main/arduino-M0-reference-design.zip)
 
 [SCHEMATICS IN .PDF](https://www.arduino.cc/en/uploads/Main/arduino-M0-schematic.pdf)