write.rs

use super::link::{self, remove};
use super::linker::LinkerInfo;
use super::lto::{self, SerializedModule};
use super::symbol_export::symbol_name_for_instance_in_crate;

use crate::{
    CachedModuleCodegen, CodegenResults, CompiledModule, CrateInfo, ModuleCodegen, ModuleKind,
};

use crate::traits::*;
use jobserver::{Acquired, Client};
use rustc_data_structures::fx::FxHashMap;
use rustc_data_structures::profiling::SelfProfilerRef;
use rustc_data_structures::profiling::TimingGuard;
use rustc_data_structures::profiling::VerboseTimingGuard;
use rustc_data_structures::sync::Lrc;
use rustc_errors::emitter::Emitter;
use rustc_errors::{DiagnosticId, FatalError, Handler, Level};
use rustc_fs_util::link_or_copy;
use rustc_hir::def_id::{CrateNum, LOCAL_CRATE};
use rustc_incremental::{
    copy_cgu_workproduct_to_incr_comp_cache_dir, in_incr_comp_dir, in_incr_comp_dir_sess,
};
use rustc_middle::dep_graph::{WorkProduct, WorkProductId};
use rustc_middle::middle::cstore::EncodedMetadata;
use rustc_middle::middle::exported_symbols::SymbolExportLevel;
use rustc_middle::ty::TyCtxt;
use rustc_session::cgu_reuse_tracker::CguReuseTracker;
use rustc_session::config::{self, CrateType, Lto, OutputFilenames, OutputType};
use rustc_session::config::{Passes, SanitizerSet, SwitchWithOptPath};
use rustc_session::Session;
use rustc_span::source_map::SourceMap;
use rustc_span::symbol::{sym, Symbol};
use rustc_span::{BytePos, FileName, InnerSpan, Pos, Span};
use rustc_target::spec::{MergeFunctions, PanicStrategy};

use std::any::Any;
use std::fs;
use std::io;
use std::mem;
use std::path::{Path, PathBuf};
use std::str;
use std::sync::mpsc::{channel, Receiver, Sender};
use std::sync::Arc;
use std::thread;

const PRE_LTO_BC_EXT: &str = "pre-lto.bc";

/// What kind of object file to emit.
#[derive(Clone, Copy, PartialEq)]
pub enum EmitObj {
    // No object file.
    None,

    // Just uncompressed llvm bitcode. Provides easy compatibility with
    // emscripten's ecc compiler, when used as the linker.
    Bitcode,

    // Object code, possibly augmented with a bitcode section.
    ObjectCode(BitcodeSection),
}

/// What kind of llvm bitcode section to embed in an object file.
#[derive(Clone, Copy, PartialEq)]
pub enum BitcodeSection {
    // No bitcode section.
    None,

    // A full, uncompressed bitcode section.
    Full,
}

/// Module-specific configuration for `optimize_and_codegen`.
pub struct ModuleConfig {
    /// Names of additional optimization passes to run.
    pub passes: Vec<String>,
    /// Some(level) to optimize at a certain level, or None to run
    /// absolutely no optimizations (used for the metadata module).
    pub opt_level: Option<config::OptLevel>,

    /// Some(level) to optimize binary size, or None to not affect program size.
    pub opt_size: Option<config::OptLevel>,

    pub pgo_gen: SwitchWithOptPath,
    pub pgo_use: Option<PathBuf>,

    pub sanitizer: SanitizerSet,
    pub sanitizer_recover: SanitizerSet,
    pub sanitizer_memory_track_origins: usize,

    // Flags indicating which outputs to produce.
    pub emit_pre_lto_bc: bool,
    pub emit_no_opt_bc: bool,
    pub emit_bc: bool,
    pub emit_ir: bool,
    pub emit_asm: bool,
    pub emit_obj: EmitObj,
    pub bc_cmdline: String,

    // Miscellaneous flags.  These are mostly copied from command-line
    // options.
    pub verify_llvm_ir: bool,
    pub no_prepopulate_passes: bool,
    pub no_builtins: bool,
    pub time_module: bool,
    pub vectorize_loop: bool,
    pub vectorize_slp: bool,
    pub merge_functions: bool,
    pub inline_threshold: Option<usize>,
    pub new_llvm_pass_manager: bool,
    pub emit_lifetime_markers: bool,
}

impl ModuleConfig {
    fn new(
        kind: ModuleKind,
        sess: &Session,
        no_builtins: bool,
        is_compiler_builtins: bool,
    ) -> ModuleConfig {
        // If it's a regular module, use `$regular`, otherwise use `$other`.
        // `$regular` and `$other` are evaluated lazily.
        macro_rules! if_regular {
            ($regular: expr, $other: expr) => {
                if let ModuleKind::Regular = kind { $regular } else { $other }
            };
        }

        let opt_level_and_size = if_regular!(Some(sess.opts.optimize), None);

        let save_temps = sess.opts.cg.save_temps;

        let should_emit_obj = sess.opts.output_types.contains_key(&OutputType::Exe)
            || match kind {
                ModuleKind::Regular => sess.opts.output_types.contains_key(&OutputType::Object),
                ModuleKind::Allocator => false,
                ModuleKind::Metadata => sess.opts.output_types.contains_key(&OutputType::Metadata),
            };

        let emit_obj = if !should_emit_obj {
            EmitObj::None
        } else if sess.target.target.options.obj_is_bitcode
            || (sess.opts.cg.linker_plugin_lto.enabled() && !no_builtins)
        {
            // This case is selected if the target uses objects as bitcode, or
            // if linker plugin LTO is enabled. In the linker plugin LTO case
            // the assumption is that the final link-step will read the bitcode
            // and convert it to object code. This may be done by either the
            // native linker or rustc itself.
            //
            // Note, however, that the linker-plugin-lto requested here is
            // explicitly ignored for `#![no_builtins]` crates. These crates are
            // specifically ignored by rustc's LTO passes and wouldn't work if
            // loaded into the linker. These crates define symbols that LLVM
            // lowers intrinsics to, and these symbol dependencies aren't known
            // until after codegen. As a result any crate marked
            // `#![no_builtins]` is assumed to not participate in LTO and
            // instead goes on to generate object code.
            EmitObj::Bitcode
        } else if need_bitcode_in_object(sess) {
            EmitObj::ObjectCode(BitcodeSection::Full)
        } else {
            EmitObj::ObjectCode(BitcodeSection::None)
        };

        ModuleConfig {
            passes: if_regular!(
                {
                    let mut passes = sess.opts.cg.passes.clone();
                    // compiler_builtins overrides the codegen-units settings,
                    // which is incompatible with -Zprofile which requires that
                    // only a single codegen unit is used per crate.
                    if sess.opts.debugging_opts.profile && !is_compiler_builtins {
                        passes.push("insert-gcov-profiling".to_owned());
                    }

                    // The rustc option `-Zinstrument_coverage` injects intrinsic calls to
                    // `llvm.instrprof.increment()`, which requires the LLVM `instrprof` pass.
                    if sess.opts.debugging_opts.instrument_coverage {
                        passes.push("instrprof".to_owned());
                    }
                    passes
                },
                vec![]
            ),

            opt_level: opt_level_and_size,
            opt_size: opt_level_and_size,

            pgo_gen: if_regular!(
                sess.opts.cg.profile_generate.clone(),
                SwitchWithOptPath::Disabled
            ),
            pgo_use: if_regular!(sess.opts.cg.profile_use.clone(), None),

            sanitizer: if_regular!(sess.opts.debugging_opts.sanitizer, SanitizerSet::empty()),
            sanitizer_recover: if_regular!(
                sess.opts.debugging_opts.sanitizer_recover,
                SanitizerSet::empty()
            ),
            sanitizer_memory_track_origins: if_regular!(
                sess.opts.debugging_opts.sanitizer_memory_track_origins,
                0
            ),

            emit_pre_lto_bc: if_regular!(
                save_temps || need_pre_lto_bitcode_for_incr_comp(sess),
                false
            ),
            emit_no_opt_bc: if_regular!(save_temps, false),
            emit_bc: if_regular!(
                save_temps || sess.opts.output_types.contains_key(&OutputType::Bitcode),
                save_temps
            ),
            emit_ir: if_regular!(
                sess.opts.output_types.contains_key(&OutputType::LlvmAssembly),
                false
            ),
            emit_asm: if_regular!(
                sess.opts.output_types.contains_key(&OutputType::Assembly),
                false
            ),
            emit_obj,
            bc_cmdline: sess.target.target.options.bitcode_llvm_cmdline.clone(),

            verify_llvm_ir: sess.verify_llvm_ir(),
            no_prepopulate_passes: sess.opts.cg.no_prepopulate_passes,
            no_builtins: no_builtins || sess.target.target.options.no_builtins,

            // Exclude metadata and allocator modules from time_passes output,
            // since they throw off the "LLVM passes" measurement.
            time_module: if_regular!(true, false),

            // Copy what clang does by turning on loop vectorization at O2 and
            // slp vectorization at O3.
            vectorize_loop: !sess.opts.cg.no_vectorize_loops
                && (sess.opts.optimize == config::OptLevel::Default
                    || sess.opts.optimize == config::OptLevel::Aggressive),
            vectorize_slp: !sess.opts.cg.no_vectorize_slp
                && sess.opts.optimize == config::OptLevel::Aggressive,

            // Some targets (namely, NVPTX) interact badly with the
            // MergeFunctions pass. This is because MergeFunctions can generate
            // new function calls which may interfere with the target calling
            // convention; e.g. for the NVPTX target, PTX kernels should not
            // call other PTX kernels. MergeFunctions can also be configured to
            // generate aliases instead, but aliases are not supported by some
            // backends (again, NVPTX). Therefore, allow targets to opt out of
            // the MergeFunctions pass, but otherwise keep the pass enabled (at
            // O2 and O3) since it can be useful for reducing code size.
            merge_functions: match sess
                .opts
                .debugging_opts
                .merge_functions
                .unwrap_or(sess.target.target.options.merge_functions)
            {
                MergeFunctions::Disabled => false,
                MergeFunctions::Trampolines | MergeFunctions::Aliases => {
                    sess.opts.optimize == config::OptLevel::Default
                        || sess.opts.optimize == config::OptLevel::Aggressive
                }
            },

            inline_threshold: sess.opts.cg.inline_threshold,
            new_llvm_pass_manager: sess.opts.debugging_opts.new_llvm_pass_manager,
            emit_lifetime_markers: sess.emit_lifetime_markers(),
        }
    }

    pub fn bitcode_needed(&self) -> bool {
        self.emit_bc
            || self.emit_obj == EmitObj::Bitcode
            || self.emit_obj == EmitObj::ObjectCode(BitcodeSection::Full)
    }
}

// HACK(eddyb) work around `#[derive]` producing wrong bounds for `Clone`.
pub struct TargetMachineFactory<B: WriteBackendMethods>(
    pub Arc<dyn Fn() -> Result<B::TargetMachine, String> + Send + Sync>,
);

impl<B: WriteBackendMethods> Clone for TargetMachineFactory<B> {
    fn clone(&self) -> Self {
        TargetMachineFactory(self.0.clone())
    }
}

pub type ExportedSymbols = FxHashMap<CrateNum, Arc<Vec<(String, SymbolExportLevel)>>>;

/// Additional resources used by optimize_and_codegen (not module specific)
#[derive(Clone)]
pub struct CodegenContext<B: WriteBackendMethods> {
    // Resources needed when running LTO
    pub backend: B,
    pub prof: SelfProfilerRef,
    pub lto: Lto,
    pub no_landing_pads: bool,
    pub save_temps: bool,
    pub fewer_names: bool,
    pub exported_symbols: Option<Arc<ExportedSymbols>>,
    pub opts: Arc<config::Options>,
    pub crate_types: Vec<CrateType>,
    pub each_linked_rlib_for_lto: Vec<(CrateNum, PathBuf)>,
    pub output_filenames: Arc<OutputFilenames>,
    pub regular_module_config: Arc<ModuleConfig>,
    pub metadata_module_config: Arc<ModuleConfig>,
    pub allocator_module_config: Arc<ModuleConfig>,
    pub tm_factory: TargetMachineFactory<B>,
    pub msvc_imps_needed: bool,
    pub target_pointer_width: String,
    pub target_arch: String,
    pub debuginfo: config::DebugInfo,

    // Number of cgus excluding the allocator/metadata modules
    pub total_cgus: usize,
    // Handler to use for diagnostics produced during codegen.
    pub diag_emitter: SharedEmitter,
    // LLVM optimizations for which we want to print remarks.
    pub remark: Passes,
    // Worker thread number
    pub worker: usize,
    // The incremental compilation session directory, or None if we are not
    // compiling incrementally
    pub incr_comp_session_dir: Option<PathBuf>,
    // Used to update CGU re-use information during the thinlto phase.
    pub cgu_reuse_tracker: CguReuseTracker,
    // Channel back to the main control thread to send messages to
    pub coordinator_send: Sender<Box<dyn Any + Send>>,
}

impl<B: WriteBackendMethods> CodegenContext<B> {
    pub fn create_diag_handler(&self) -> Handler {
        Handler::with_emitter(true, None, Box::new(self.diag_emitter.clone()))
    }

    pub fn config(&self, kind: ModuleKind) -> &ModuleConfig {
        match kind {
            ModuleKind::Regular => &self.regular_module_config,
            ModuleKind::Metadata => &self.metadata_module_config,
            ModuleKind::Allocator => &self.allocator_module_config,
        }
    }
}

fn generate_lto_work<B: ExtraBackendMethods>(
    cgcx: &CodegenContext<B>,
    needs_fat_lto: Vec<FatLTOInput<B>>,
    needs_thin_lto: Vec<(String, B::ThinBuffer)>,
    import_only_modules: Vec<(SerializedModule<B::ModuleBuffer>, WorkProduct)>,
) -> Vec<(WorkItem<B>, u64)> {
    let _prof_timer = cgcx.prof.generic_activity("codegen_generate_lto_work");

    let (lto_modules, copy_jobs) = if !needs_fat_lto.is_empty() {
        assert!(needs_thin_lto.is_empty());
        let lto_module =
            B::run_fat_lto(cgcx, needs_fat_lto, import_only_modules).unwrap_or_else(|e| e.raise());
        (vec![lto_module], vec![])
    } else {
        assert!(needs_fat_lto.is_empty());
        B::run_thin_lto(cgcx, needs_thin_lto, import_only_modules).unwrap_or_else(|e| e.raise())
    };

    lto_modules
        .into_iter()
        .map(|module| {
            let cost = module.cost();
            (WorkItem::LTO(module), cost)
        })
        .chain(copy_jobs.into_iter().map(|wp| {
            (
                WorkItem::CopyPostLtoArtifacts(CachedModuleCodegen {
                    name: wp.cgu_name.clone(),
                    source: wp,
                }),
                0,
            )
        }))
        .collect()
}

pub struct CompiledModules {
    pub modules: Vec<CompiledModule>,
    pub metadata_module: Option<CompiledModule>,
    pub allocator_module: Option<CompiledModule>,
}

fn need_bitcode_in_object(sess: &Session) -> bool {
    let requested_for_rlib = sess.opts.cg.embed_bitcode
        && sess.crate_types().contains(&CrateType::Rlib)
        && sess.opts.output_types.contains_key(&OutputType::Exe);
    let forced_by_target = sess.target.target.options.forces_embed_bitcode;
    requested_for_rlib || forced_by_target
}

fn need_pre_lto_bitcode_for_incr_comp(sess: &Session) -> bool {
    if sess.opts.incremental.is_none() {
        return false;
    }

    match sess.lto() {
        Lto::No => false,
        Lto::Fat | Lto::Thin | Lto::ThinLocal => true,
    }
}

pub fn start_async_codegen<B: ExtraBackendMethods>(
    backend: B,
    tcx: TyCtxt<'_>,
    metadata: EncodedMetadata,
    total_cgus: usize,
) -> OngoingCodegen<B> {
    let (coordinator_send, coordinator_receive) = channel();
    let sess = tcx.sess;

    let crate_name = tcx.crate_name(LOCAL_CRATE);
    let no_builtins = tcx.sess.contains_name(&tcx.hir().krate().item.attrs, sym::no_builtins);
    let is_compiler_builtins =
        tcx.sess.contains_name(&tcx.hir().krate().item.attrs, sym::compiler_builtins);
    let subsystem = tcx
        .sess
        .first_attr_value_str_by_name(&tcx.hir().krate().item.attrs, sym::windows_subsystem);
    let windows_subsystem = subsystem.map(|subsystem| {
        if subsystem != sym::windows && subsystem != sym::console {
            tcx.sess.fatal(&format!(
                "invalid windows subsystem `{}`, only \
                                     `windows` and `console` are allowed",
                subsystem
            ));
        }
        subsystem.to_string()
    });

    let linker_info = LinkerInfo::new(tcx);
    let crate_info = CrateInfo::new(tcx);

    let regular_config =
        ModuleConfig::new(ModuleKind::Regular, sess, no_builtins, is_compiler_builtins);
    let metadata_config =
        ModuleConfig::new(ModuleKind::Metadata, sess, no_builtins, is_compiler_builtins);
    let allocator_config =
        ModuleConfig::new(ModuleKind::Allocator, sess, no_builtins, is_compiler_builtins);

    let (shared_emitter, shared_emitter_main) = SharedEmitter::new();
    let (codegen_worker_send, codegen_worker_receive) = channel();

    let coordinator_thread = start_executing_work(
        backend.clone(),
        tcx,
        &crate_info,
        shared_emitter,
        codegen_worker_send,
        coordinator_receive,
        total_cgus,
        sess.jobserver.clone(),
        Arc::new(regular_config),
        Arc::new(metadata_config),
        Arc::new(allocator_config),
        coordinator_send.clone(),
    );

    OngoingCodegen {
        backend,
        crate_name,
        metadata,
        windows_subsystem,
        linker_info,
        crate_info,

        coordinator_send,
        codegen_worker_receive,
        shared_emitter_main,
        future: coordinator_thread,
        output_filenames: tcx.output_filenames(LOCAL_CRATE),
    }
}

fn copy_all_cgu_workproducts_to_incr_comp_cache_dir(
    sess: &Session,
    compiled_modules: &CompiledModules,
) -> FxHashMap<WorkProductId, WorkProduct> {
    let mut work_products = FxHashMap::default();

    if sess.opts.incremental.is_none() {
        return work_products;
    }

    let _timer = sess.timer("copy_all_cgu_workproducts_to_incr_comp_cache_dir");

    for module in compiled_modules.modules.iter().filter(|m| m.kind == ModuleKind::Regular) {
        let path = module.object.as_ref().cloned();

        if let Some((id, product)) =
            copy_cgu_workproduct_to_incr_comp_cache_dir(sess, &module.name, &path)
        {
            work_products.insert(id, product);
        }
    }

    work_products
}

fn produce_final_output_artifacts(
    sess: &Session,
    compiled_modules: &CompiledModules,
    crate_output: &OutputFilenames,
) {
    let mut user_wants_bitcode = false;
    let mut user_wants_objects = false;

    // Produce final compile outputs.
    let copy_gracefully = |from: &Path, to: &Path| {
        if let Err(e) = fs::copy(from, to) {
            sess.err(&format!("could not copy {:?} to {:?}: {}", from, to, e));
        }
    };

    let copy_if_one_unit = |output_type: OutputType, keep_numbered: bool| {
        if compiled_modules.modules.len() == 1 {
            // 1) Only one codegen unit.  In this case it's no difficulty
            //    to copy `foo.0.x` to `foo.x`.
            let module_name = Some(&compiled_modules.modules[0].name[..]);
            let path = crate_output.temp_path(output_type, module_name);
            copy_gracefully(&path, &crate_output.path(output_type));
            if !sess.opts.cg.save_temps && !keep_numbered {
                // The user just wants `foo.x`, not `foo.#module-name#.x`.
                remove(sess, &path);
            }
        } else {
            let ext = crate_output
                .temp_path(output_type, None)
                .extension()
                .unwrap()
                .to_str()
                .unwrap()
                .to_owned();

            if crate_output.outputs.contains_key(&output_type) {
                // 2) Multiple codegen units, with `--emit foo=some_name`.  We have
                //    no good solution for this case, so warn the user.
                sess.warn(&format!(
                    "ignoring emit path because multiple .{} files \
                                    were produced",
                    ext
                ));
            } else if crate_output.single_output_file.is_some() {
                // 3) Multiple codegen units, with `-o some_name`.  We have
                //    no good solution for this case, so warn the user.
                sess.warn(&format!(
                    "ignoring -o because multiple .{} files \
                                    were produced",
                    ext
                ));
            } else {
                // 4) Multiple codegen units, but no explicit name.  We
                //    just leave the `foo.0.x` files in place.
                // (We don't have to do any work in this case.)
            }
        }
    };

    // Flag to indicate whether the user explicitly requested bitcode.
    // Otherwise, we produced it only as a temporary output, and will need
    // to get rid of it.
    for output_type in crate_output.outputs.keys() {
        match *output_type {
            OutputType::Bitcode => {
                user_wants_bitcode = true;
                // Copy to .bc, but always keep the .0.bc.  There is a later
                // check to figure out if we should delete .0.bc files, or keep
                // them for making an rlib.
                copy_if_one_unit(OutputType::Bitcode, true);
            }
            OutputType::LlvmAssembly => {
                copy_if_one_unit(OutputType::LlvmAssembly, false);
            }
            OutputType::Assembly => {
                copy_if_one_unit(OutputType::Assembly, false);
            }
            OutputType::Object => {
                user_wants_objects = true;
                copy_if_one_unit(OutputType::Object, true);
            }
            OutputType::Mir | OutputType::Metadata | OutputType::Exe | OutputType::DepInfo => {}
        }
    }

    // Clean up unwanted temporary files.

    // We create the following files by default:
    //  - #crate#.#module-name#.bc
    //  - #crate#.#module-name#.o
    //  - #crate#.crate.metadata.bc
    //  - #crate#.crate.metadata.o
    //  - #crate#.o (linked from crate.##.o)
    //  - #crate#.bc (copied from crate.##.bc)
    // We may create additional files if requested by the user (through
    // `-C save-temps` or `--emit=` flags).

    if !sess.opts.cg.save_temps {
        // Remove the temporary .#module-name#.o objects.  If the user didn't
        // explicitly request bitcode (with --emit=bc), and the bitcode is not
        // needed for building an rlib, then we must remove .#module-name#.bc as
        // well.

        // Specific rules for keeping .#module-name#.bc:
        //  - If the user requested bitcode (`user_wants_bitcode`), and
        //    codegen_units > 1, then keep it.
        //  - If the user requested bitcode but codegen_units == 1, then we
        //    can toss .#module-name#.bc because we copied it to .bc earlier.
        //  - If we're not building an rlib and the user didn't request
        //    bitcode, then delete .#module-name#.bc.
        // If you change how this works, also update back::link::link_rlib,
        // where .#module-name#.bc files are (maybe) deleted after making an
        // rlib.
        let needs_crate_object = crate_output.outputs.contains_key(&OutputType::Exe);

        let keep_numbered_bitcode = user_wants_bitcode && sess.codegen_units() > 1;

        let keep_numbered_objects =
            needs_crate_object || (user_wants_objects && sess.codegen_units() > 1);

        for module in compiled_modules.modules.iter() {
            if let Some(ref path) = module.object {
                if !keep_numbered_objects {
                    remove(sess, path);
                }
            }

            if let Some(ref path) = module.bytecode {
                if !keep_numbered_bitcode {
                    remove(sess, path);
                }
            }
        }

        if !user_wants_bitcode {
            if let Some(ref metadata_module) = compiled_modules.metadata_module {
                if let Some(ref path) = metadata_module.bytecode {
                    remove(sess, &path);
                }
            }

            if let Some(ref allocator_module) = compiled_modules.allocator_module {
                if let Some(ref path) = allocator_module.bytecode {
                    remove(sess, path);
                }
            }
        }
    }

    // We leave the following files around by default:
    //  - #crate#.o
    //  - #crate#.crate.metadata.o
    //  - #crate#.bc
    // These are used in linking steps and will be cleaned up afterward.
}

pub enum WorkItem<B: WriteBackendMethods> {
    /// Optimize a newly codegened, totally unoptimized module.
    Optimize(ModuleCodegen<B::Module>),
    /// Copy the post-LTO artifacts from the incremental cache to the output
    /// directory.
    CopyPostLtoArtifacts(CachedModuleCodegen),
    /// Performs (Thin)LTO on the given module.
    LTO(lto::LtoModuleCodegen<B>),
}

impl<B: WriteBackendMethods> WorkItem<B> {
    pub fn module_kind(&self) -> ModuleKind {
        match *self {
            WorkItem::Optimize(ref m) => m.kind,
            WorkItem::CopyPostLtoArtifacts(_) | WorkItem::LTO(_) => ModuleKind::Regular,
        }
    }

    fn start_profiling<'a>(&self, cgcx: &'a CodegenContext<B>) -> TimingGuard<'a> {
        match *self {
            WorkItem::Optimize(ref m) => {
                cgcx.prof.generic_activity_with_arg("codegen_module_optimize", &m.name[..])
            }
            WorkItem::CopyPostLtoArtifacts(ref m) => cgcx
                .prof
                .generic_activity_with_arg("codegen_copy_artifacts_from_incr_cache", &m.name[..]),
            WorkItem::LTO(ref m) => {
                cgcx.prof.generic_activity_with_arg("codegen_module_perform_lto", m.name())
            }
        }
    }
}

enum WorkItemResult<B: WriteBackendMethods> {
    Compiled(CompiledModule),
    NeedsLink(ModuleCodegen<B::Module>),
    NeedsFatLTO(FatLTOInput<B>),
    NeedsThinLTO(String, B::ThinBuffer),
}

pub enum FatLTOInput<B: WriteBackendMethods> {
    Serialized { name: String, buffer: B::ModuleBuffer },
    InMemory(ModuleCodegen<B::Module>),
}

fn execute_work_item<B: ExtraBackendMethods>(
    cgcx: &CodegenContext<B>,
    work_item: WorkItem<B>,
) -> Result<WorkItemResult<B>, FatalError> {
    let module_config = cgcx.config(work_item.module_kind());

    match work_item {
        WorkItem::Optimize(module) => execute_optimize_work_item(cgcx, module, module_config),
        WorkItem::CopyPostLtoArtifacts(module) => {
            execute_copy_from_cache_work_item(cgcx, module, module_config)
        }
        WorkItem::LTO(module) => execute_lto_work_item(cgcx, module, module_config),
    }
}

// Actual LTO type we end up choosing based on multiple factors.
pub enum ComputedLtoType {
    No,
    Thin,
    Fat,
}

pub fn compute_per_cgu_lto_type(
    sess_lto: &Lto,
    opts: &config::Options,
    sess_crate_types: &[CrateType],
    module_kind: ModuleKind,
) -> ComputedLtoType {
    // Metadata modules never participate in LTO regardless of the lto
    // settings.
    if module_kind == ModuleKind::Metadata {
        return ComputedLtoType::No;
    }

    // If the linker does LTO, we don't have to do it. Note that we
    // keep doing full LTO, if it is requested, as not to break the
    // assumption that the output will be a single module.
    let linker_does_lto = opts.cg.linker_plugin_lto.enabled();

    // When we're automatically doing ThinLTO for multi-codegen-unit
    // builds we don't actually want to LTO the allocator modules if
    // it shows up. This is due to various linker shenanigans that
    // we'll encounter later.
    let is_allocator = module_kind == ModuleKind::Allocator;

    // We ignore a request for full crate grath LTO if the cate type
    // is only an rlib, as there is no full crate graph to process,
    // that'll happen later.
    //
    // This use case currently comes up primarily for targets that
    // require LTO so the request for LTO is always unconditionally
    // passed down to the backend, but we don't actually want to do
    // anything about it yet until we've got a final product.
    let is_rlib = sess_crate_types.len() == 1 && sess_crate_types[0] == CrateType::Rlib;

    match sess_lto {
        Lto::ThinLocal if !linker_does_lto && !is_allocator => ComputedLtoType::Thin,
        Lto::Thin if !linker_does_lto && !is_rlib => ComputedLtoType::Thin,
        Lto::Fat if !is_rlib => ComputedLtoType::Fat,
        _ => ComputedLtoType::No,
    }
}

fn execute_optimize_work_item<B: ExtraBackendMethods>(
    cgcx: &CodegenContext<B>,
    module: ModuleCodegen<B::Module>,
    module_config: &ModuleConfig,
) -> Result<WorkItemResult<B>, FatalError> {
    let diag_handler = cgcx.create_diag_handler();

    unsafe {
        B::optimize(cgcx, &diag_handler, &module, module_config)?;
    }

    // After we've done the initial round of optimizations we need to
    // decide whether to synchronously codegen this module or ship it
    // back to the coordinator thread for further LTO processing (which
    // has to wait for all the initial modules to be optimized).

    let lto_type = compute_per_cgu_lto_type(&cgcx.lto, &cgcx.opts, &cgcx.crate_types, module.kind);

    // If we're doing some form of incremental LTO then we need to be sure to
    // save our module to disk first.
    let bitcode = if cgcx.config(module.kind).emit_pre_lto_bc {
        let filename = pre_lto_bitcode_filename(&module.name);
        cgcx.incr_comp_session_dir.as_ref().map(|path| path.join(&filename))
    } else {
        None
    };

    match lto_type {
        ComputedLtoType::No => finish_intra_module_work(cgcx, module, module_config),
        ComputedLtoType::Thin => {
            let (name, thin_buffer) = B::prepare_thin(module);
            if let Some(path) = bitcode {
                fs::write(&path, thin_buffer.data()).unwrap_or_else(|e| {
                    panic!("Error writing pre-lto-bitcode file `{}`: {}", path.display(), e);
                });
            }
            Ok(WorkItemResult::NeedsThinLTO(name, thin_buffer))
        }
        ComputedLtoType::Fat => match bitcode {
            Some(path) => {
                let (name, buffer) = B::serialize_module(module);
                fs::write(&path, buffer.data()).unwrap_or_else(|e| {
                    panic!("Error writing pre-lto-bitcode file `{}`: {}", path.display(), e);
                });
                Ok(WorkItemResult::NeedsFatLTO(FatLTOInput::Serialized { name, buffer }))
            }
            None => Ok(WorkItemResult::NeedsFatLTO(FatLTOInput::InMemory(module))),
        },
    }
}

fn execute_copy_from_cache_work_item<B: ExtraBackendMethods>(
    cgcx: &CodegenContext<B>,
    module: CachedModuleCodegen,
    module_config: &ModuleConfig,
) -> Result<WorkItemResult<B>, FatalError> {
    let incr_comp_session_dir = cgcx.incr_comp_session_dir.as_ref().unwrap();
    let mut object = None;
    if let Some(saved_file) = module.source.saved_file {
        let obj_out = cgcx.output_filenames.temp_path(OutputType::Object, Some(&module.name));
        object = Some(obj_out.clone());
        let source_file = in_incr_comp_dir(&incr_comp_session_dir, &saved_file);
        debug!(
            "copying pre-existing module `{}` from {:?} to {}",
            module.name,
            source_file,
            obj_out.display()
        );
        if let Err(err) = link_or_copy(&source_file, &obj_out) {
            let diag_handler = cgcx.create_diag_handler();
            diag_handler.err(&format!(
                "unable to copy {} to {}: {}",
                source_file.display(),
                obj_out.display(),
                err
            ));
        }
    }

    assert_eq!(object.is_some(), module_config.emit_obj != EmitObj::None);

    Ok(WorkItemResult::Compiled(CompiledModule {
        name: module.name,
        kind: ModuleKind::Regular,
        object,
        bytecode: None,
    }))
}

fn execute_lto_work_item<B: ExtraBackendMethods>(
    cgcx: &CodegenContext<B>,
    mut module: lto::LtoModuleCodegen<B>,
    module_config: &ModuleConfig,
) -> Result<WorkItemResult<B>, FatalError> {
    let module = unsafe { module.optimize(cgcx)? };
    finish_intra_module_work(cgcx, module, module_config)
}

fn finish_intra_module_work<B: ExtraBackendMethods>(
    cgcx: &CodegenContext<B>,
    module: ModuleCodegen<B::Module>,
    module_config: &ModuleConfig,
) -> Result<WorkItemResult<B>, FatalError> {
    let diag_handler = cgcx.create_diag_handler();

    if !cgcx.opts.debugging_opts.combine_cgu
        || module.kind == ModuleKind::Metadata
        || module.kind == ModuleKind::Allocator
    {
        let module = unsafe { B::codegen(cgcx, &diag_handler, module, module_config)? };
        Ok(WorkItemResult::Compiled(module))
    } else {
        Ok(WorkItemResult::NeedsLink(module))
    }
}

pub enum Message<B: WriteBackendMethods> {
    Token(io::Result<Acquired>),
    NeedsFatLTO {
        result: FatLTOInput<B>,
        worker_id: usize,
    },
    NeedsThinLTO {
        name: String,
        thin_buffer: B::ThinBuffer,
        worker_id: usize,
    },
    NeedsLink {
        module: ModuleCodegen<B::Module>,
        worker_id: usize,
    },
    Done {
        result: Result<CompiledModule, Option<WorkerFatalError>>,
        worker_id: usize,
    },
    CodegenDone {
        llvm_work_item: WorkItem<B>,
        cost: u64,
    },
    AddImportOnlyModule {
        module_data: SerializedModule<B::ModuleBuffer>,
        work_product: WorkProduct,
    },
    CodegenComplete,
    CodegenItem,
    CodegenAborted,
}

struct Diagnostic {
    msg: String,
    code: Option<DiagnosticId>,
    lvl: Level,
}

#[derive(PartialEq, Clone, Copy, Debug)]
enum MainThreadWorkerState {
    Idle,
    Codegenning,
    LLVMing,
}

fn start_executing_work<B: ExtraBackendMethods>(
    backend: B,
    tcx: TyCtxt<'_>,
    crate_info: &CrateInfo,
    shared_emitter: SharedEmitter,
    codegen_worker_send: Sender<Message<B>>,
    coordinator_receive: Receiver<Box<dyn Any + Send>>,
    total_cgus: usize,
    jobserver: Client,
    regular_config: Arc<ModuleConfig>,
    metadata_config: Arc<ModuleConfig>,
    allocator_config: Arc<ModuleConfig>,
    tx_to_llvm_workers: Sender<Box<dyn Any + Send>>,
) -> thread::JoinHandle<Result<CompiledModules, ()>> {
    let coordinator_send = tx_to_llvm_workers;
    let sess = tcx.sess;

    // Compute the set of symbols we need to retain when doing LTO (if we need to)
    let exported_symbols = {
        let mut exported_symbols = FxHashMap::default();

        let copy_symbols = |cnum| {
            let symbols = tcx
                .exported_symbols(cnum)
                .iter()
                .map(|&(s, lvl)| (symbol_name_for_instance_in_crate(tcx, s, cnum), lvl))
                .collect();
            Arc::new(symbols)
        };

        match sess.lto() {
            Lto::No => None,
            Lto::ThinLocal => {
                exported_symbols.insert(LOCAL_CRATE, copy_symbols(LOCAL_CRATE));
                Some(Arc::new(exported_symbols))
            }
            Lto::Fat | Lto::Thin => {
                exported_symbols.insert(LOCAL_CRATE, copy_symbols(LOCAL_CRATE));
                for &cnum in tcx.crates().iter() {
                    exported_symbols.insert(cnum, copy_symbols(cnum));
                }
                Some(Arc::new(exported_symbols))
            }
        }
    };

    // First up, convert our jobserver into a helper thread so we can use normal
    // mpsc channels to manage our messages and such.
    // After we've requested tokens then we'll, when we can,
    // get tokens on `coordinator_receive` which will
    // get managed in the main loop below.
    let coordinator_send2 = coordinator_send.clone();
    let helper = jobserver
        .into_helper_thread(move |token| {
            drop(coordinator_send2.send(Box::new(Message::Token::<B>(token))));
        })
        .expect("failed to spawn helper thread");

    let mut each_linked_rlib_for_lto = Vec::new();
    drop(link::each_linked_rlib(crate_info, &mut |cnum, path| {
        if link::ignored_for_lto(sess, crate_info, cnum) {
            return;
        }
        each_linked_rlib_for_lto.push((cnum, path.to_path_buf()));
    }));

    let ol = if tcx.sess.opts.debugging_opts.no_codegen
        || !tcx.sess.opts.output_types.should_codegen()
    {
        // If we know that we won’t be doing codegen, create target machines without optimisation.
        config::OptLevel::No
    } else {
        tcx.backend_optimization_level(LOCAL_CRATE)
    };
    let cgcx = CodegenContext::<B> {
        backend: backend.clone(),
        crate_types: sess.crate_types().to_vec(),
        each_linked_rlib_for_lto,
        lto: sess.lto(),
        no_landing_pads: sess.panic_strategy() == PanicStrategy::Abort,
        fewer_names: sess.fewer_names(),
        save_temps: sess.opts.cg.save_temps,
        opts: Arc::new(sess.opts.clone()),
        prof: sess.prof.clone(),
        exported_symbols,
        remark: sess.opts.cg.remark.clone(),
        worker: 0,
        incr_comp_session_dir: sess.incr_comp_session_dir_opt().map(|r| r.clone()),
        cgu_reuse_tracker: sess.cgu_reuse_tracker.clone(),
        coordinator_send,
        diag_emitter: shared_emitter.clone(),
        output_filenames: tcx.output_filenames(LOCAL_CRATE),
        regular_module_config: regular_config,
        metadata_module_config: metadata_config,
        allocator_module_config: allocator_config,
        tm_factory: TargetMachineFactory(backend.target_machine_factory(tcx.sess, ol)),
        total_cgus,
        msvc_imps_needed: msvc_imps_needed(tcx),
        target_pointer_width: tcx.sess.target.target.target_pointer_width.clone(),
        target_arch: tcx.sess.target.target.arch.clone(),
        debuginfo: tcx.sess.opts.debuginfo,
    };

    // This is the "main loop" of parallel work happening for parallel codegen.
    // It's here that we manage parallelism, schedule work, and work with
    // messages coming from clients.
    //
    // There are a few environmental pre-conditions that shape how the system
    // is set up:
    //
    // - Error reporting only can happen on the main thread because that's the
    //   only place where we have access to the compiler `Session`.
    // - LLVM work can be done on any thread.
    // - Codegen can only happen on the main thread.
    // - Each thread doing substantial work most be in possession of a `Token`
    //   from the `Jobserver`.
    // - The compiler process always holds one `Token`. Any additional `Tokens`
    //   have to be requested from the `Jobserver`.
    //
    // Error Reporting
    // ===============
    // The error reporting restriction is handled separately from the rest: We
    // set up a `SharedEmitter` the holds an open channel to the main thread.
    // When an error occurs on any thread, the shared emitter will send the
    // error message to the receiver main thread (`SharedEmitterMain`). The
    // main thread will periodically query this error message queue and emit
    // any error messages it has received. It might even abort compilation if
    // has received a fatal error. In this case we rely on all other threads
    // being torn down automatically with the main thread.
    // Since the main thread will often be busy doing codegen work, error
    // reporting will be somewhat delayed, since the message queue can only be
    // checked in between to work packages.
    //
    // Work Processing Infrastructure
    // ==============================
    // The work processing infrastructure knows three major actors:
    //
    // - the coordinator thread,
    // - the main thread, and
    // - LLVM worker threads
    //
    // The coordinator thread is running a message loop. It instructs the main
    // thread about what work to do when, and it will spawn off LLVM worker
    // threads as open LLVM WorkItems become available.
    //
    // The job of the main thread is to codegen CGUs into LLVM work package
    // (since the main thread is the only thread that can do this). The main
    // thread will block until it receives a message from the coordinator, upon
    // which it will codegen one CGU, send it to the coordinator and block
    // again. This way the coordinator can control what the main thread is
    // doing.
    //
    // The coordinator keeps a queue of LLVM WorkItems, and when a `Token` is
    // available, it will spawn off a new LLVM worker thread and let it process
    // that a WorkItem. When a LLVM worker thread is done with its WorkItem,
    // it will just shut down, which also frees all resources associated with
    // the given LLVM module, and sends a message to the coordinator that the
    // has been completed.
    //
    // Work Scheduling
    // ===============
    // The scheduler's goal is to minimize the time it takes to complete all
    // work there is, however, we also want to keep memory consumption low
    // if possible. These two goals are at odds with each other: If memory
    // consumption were not an issue, we could just let the main thread produce
    // LLVM WorkItems at full speed, assuring maximal utilization of
    // Tokens/LLVM worker threads. However, since codegen usual is faster
    // than LLVM processing, the queue of LLVM WorkItems would fill up and each
    // WorkItem potentially holds on to a substantial amount of memory.
    //
    // So the actual goal is to always produce just enough LLVM WorkItems as
    // not to starve our LLVM worker threads. That means, once we have enough
    // WorkItems in our queue, we can block the main thread, so it does not
    // produce more until we need them.
    //
    // Doing LLVM Work on the Main Thread
    // ----------------------------------
    // Since the main thread owns the compiler processes implicit `Token`, it is
    // wasteful to keep it blocked without doing any work. Therefore, what we do
    // in this case is: We spawn off an additional LLVM worker thread that helps
    // reduce the queue. The work it is doing corresponds to the implicit
    // `Token`. The coordinator will mark the main thread as being busy with
    // LLVM work. (The actual work happens on another OS thread but we just care
    // about `Tokens`, not actual threads).
    //
    // When any LLVM worker thread finishes while the main thread is marked as
    // "busy with LLVM work", we can do a little switcheroo: We give the Token
    // of the just finished thread to the LLVM worker thread that is working on
    // behalf of the main thread's implicit Token, thus freeing up the main
    // thread again. The coordinator can then again decide what the main thread
    // should do. This allows the coordinator to make decisions at more points
    // in time.
    //
    // Striking a Balance between Throughput and Memory Consumption
    // ------------------------------------------------------------
    // Since our two goals, (1) use as many Tokens as possible and (2) keep
    // memory consumption as low as possible, are in conflict with each other,
    // we have to find a trade off between them. Right now, the goal is to keep
    // all workers busy, which means that no worker should find the queue empty
    // when it is ready to start.
    // How do we do achieve this? Good question :) We actually never know how
    // many `Tokens` are potentially available so it's hard to say how much to
    // fill up the queue before switching the main thread to LLVM work. Also we
    // currently don't have a means to estimate how long a running LLVM worker
    // will still be busy with it's current WorkItem. However, we know the
    // maximal count of available Tokens that makes sense (=the number of CPU
    // cores), so we can take a conservative guess. The heuristic we use here
    // is implemented in the `queue_full_enough()` function.
    //
    // Some Background on Jobservers
    // -----------------------------
    // It's worth also touching on the management of parallelism here. We don't
    // want to just spawn a thread per work item because while that's optimal
    // parallelism it may overload a system with too many threads or violate our
    // configuration for the maximum amount of cpu to use for this process. To
    // manage this we use the `jobserver` crate.
    //
    // Job servers are an artifact of GNU make and are used to manage
    // parallelism between processes. A jobserver is a glorified IPC semaphore
    // basically. Whenever we want to run some work we acquire the semaphore,
    // and whenever we're done with that work we release the semaphore. In this
    // manner we can ensure that the maximum number of parallel workers is
    // capped at any one point in time.
    //
    // LTO and the coordinator thread
    // ------------------------------
    //
    // The final job the coordinator thread is responsible for is managing LTO
    // and how that works. When LTO is requested what we'll to is collect all
    // optimized LLVM modules into a local vector on the coordinator. Once all
    // modules have been codegened and optimized we hand this to the `lto`
    // module for further optimization. The `lto` module will return back a list
    // of more modules to work on, which the coordinator will continue to spawn
    // work for.
    //
    // Each LLVM module is automatically sent back to the coordinator for LTO if
    // necessary. There's already optimizations in place to avoid sending work
    // back to the coordinator if LTO isn't requested.
    return thread::spawn(move || {
        let max_workers = ::num_cpus::get();
        let mut worker_id_counter = 0;
        let mut free_worker_ids = Vec::new();
        let mut get_worker_id = |free_worker_ids: &mut Vec<usize>| {
            if let Some(id) = free_worker_ids.pop() {
                id
            } else {
                let id = worker_id_counter;
                worker_id_counter += 1;
                id
            }
        };

        // This is where we collect codegen units that have gone all the way
        // through codegen and LLVM.
        let mut compiled_modules = vec![];
        let mut compiled_metadata_module = None;
        let mut compiled_allocator_module = None;
        let mut needs_link = Vec::new();
        let mut needs_fat_lto = Vec::new();
        let mut needs_thin_lto = Vec::new();
        let mut lto_import_only_modules = Vec::new();
        let mut started_lto = false;
        let mut codegen_aborted = false;

        // This flag tracks whether all items have gone through codegens
        let mut codegen_done = false;

        // This is the queue of LLVM work items that still need processing.
        let mut work_items = Vec::<(WorkItem<B>, u64)>::new();

        // This are the Jobserver Tokens we currently hold. Does not include
        // the implicit Token the compiler process owns no matter what.
        let mut tokens = Vec::new();

        let mut main_thread_worker_state = MainThreadWorkerState::Idle;
        let mut running = 0;

        let prof = &cgcx.prof;
        let mut llvm_start_time: Option<VerboseTimingGuard<'_>> = None;

        // Run the message loop while there's still anything that needs message
        // processing. Note that as soon as codegen is aborted we simply want to
        // wait for all existing work to finish, so many of the conditions here
        // only apply if codegen hasn't been aborted as they represent pending
        // work to be done.
        while !codegen_done
            || running > 0
            || (!codegen_aborted
                && !(work_items.is_empty()
                    && needs_fat_lto.is_empty()
                    && needs_thin_lto.is_empty()
                    && lto_import_only_modules.is_empty()
                    && main_thread_worker_state == MainThreadWorkerState::Idle))
        {
            // While there are still CGUs to be codegened, the coordinator has
            // to decide how to utilize the compiler processes implicit Token:
            // For codegenning more CGU or for running them through LLVM.
            if !codegen_done {
                if main_thread_worker_state == MainThreadWorkerState::Idle {
                    if !queue_full_enough(work_items.len(), running, max_workers) {
                        // The queue is not full enough, codegen more items:
                        if codegen_worker_send.send(Message::CodegenItem).is_err() {
                            panic!("Could not send Message::CodegenItem to main thread")
                        }
                        main_thread_worker_state = MainThreadWorkerState::Codegenning;
                    } else {
                        // The queue is full enough to not let the worker
                        // threads starve. Use the implicit Token to do some
                        // LLVM work too.
                        let (item, _) =
                            work_items.pop().expect("queue empty - queue_full_enough() broken?");
                        let cgcx = CodegenContext {
                            worker: get_worker_id(&mut free_worker_ids),
                            ..cgcx.clone()
                        };
                        maybe_start_llvm_timer(
                            prof,
                            cgcx.config(item.module_kind()),
                            &mut llvm_start_time,
                        );
                        main_thread_worker_state = MainThreadWorkerState::LLVMing;
                        spawn_work(cgcx, item);
                    }
                }
            } else if codegen_aborted {
                // don't queue up any more work if codegen was aborted, we're
                // just waiting for our existing children to finish
            } else {
                // If we've finished everything related to normal codegen
                // then it must be the case that we've got some LTO work to do.
                // Perform the serial work here of figuring out what we're
                // going to LTO and then push a bunch of work items onto our
                // queue to do LTO
                if work_items.is_empty()
                    && running == 0
                    && main_thread_worker_state == MainThreadWorkerState::Idle
                {
                    assert!(!started_lto);
                    started_lto = true;

                    let needs_fat_lto = mem::take(&mut needs_fat_lto);
                    let needs_thin_lto = mem::take(&mut needs_thin_lto);
                    let import_only_modules = mem::take(&mut lto_import_only_modules);

                    for (work, cost) in
                        generate_lto_work(&cgcx, needs_fat_lto, needs_thin_lto, import_only_modules)
                    {
                        let insertion_index = work_items
                            .binary_search_by_key(&cost, |&(_, cost)| cost)
                            .unwrap_or_else(|e| e);
                        work_items.insert(insertion_index, (work, cost));
                        if !cgcx.opts.debugging_opts.no_parallel_llvm {
                            helper.request_token();
                        }
                    }
                }

                // In this branch, we know that everything has been codegened,
                // so it's just a matter of determining whether the implicit
                // Token is free to use for LLVM work.
                match main_thread_worker_state {
                    MainThreadWorkerState::Idle => {
                        if let Some((item, _)) = work_items.pop() {
                            let cgcx = CodegenContext {
                                worker: get_worker_id(&mut free_worker_ids),
                                ..cgcx.clone()
                            };
                            maybe_start_llvm_timer(
                                prof,
                                cgcx.config(item.module_kind()),
                                &mut llvm_start_time,
                            );
                            main_thread_worker_state = MainThreadWorkerState::LLVMing;
                            spawn_work(cgcx, item);
                        } else {
                            // There is no unstarted work, so let the main thread
                            // take over for a running worker. Otherwise the
                            // implicit token would just go to waste.
                            // We reduce the `running` counter by one. The
                            // `tokens.truncate()` below will take care of
                            // giving the Token back.
                            debug_assert!(running > 0);
                            running -= 1;
                            main_thread_worker_state = MainThreadWorkerState::LLVMing;
                        }
                    }
                    MainThreadWorkerState::Codegenning => bug!(
                        "codegen worker should not be codegenning after \
                              codegen was already completed"
                    ),
                    MainThreadWorkerState::LLVMing => {
                        // Already making good use of that token
                    }
                }
            }

            // Spin up what work we can, only doing this while we've got available
            // parallelism slots and work left to spawn.
            while !codegen_aborted && !work_items.is_empty() && running < tokens.len() {
                let (item, _) = work_items.pop().unwrap();

                maybe_start_llvm_timer(prof, cgcx.config(item.module_kind()), &mut llvm_start_time);

                let cgcx =
                    CodegenContext { worker: get_worker_id(&mut free_worker_ids), ..cgcx.clone() };

                spawn_work(cgcx, item);
                running += 1;
            }

            // Relinquish accidentally acquired extra tokens
            tokens.truncate(running);

            // If a thread exits successfully then we drop a token associated
            // with that worker and update our `running` count. We may later
            // re-acquire a token to continue running more work. We may also not
            // actually drop a token here if the worker was running with an
            // "ephemeral token"
            let mut free_worker = |worker_id| {
                if main_thread_worker_state == MainThreadWorkerState::LLVMing {
                    main_thread_worker_state = MainThreadWorkerState::Idle;
                } else {
                    running -= 1;
                }

                free_worker_ids.push(worker_id);
            };

            let msg = coordinator_receive.recv().unwrap();
            match *msg.downcast::<Message<B>>().ok().unwrap() {
                // Save the token locally and the next turn of the loop will use
                // this to spawn a new unit of work, or it may get dropped
                // immediately if we have no more work to spawn.
                Message::Token(token) => {
                    match token {
                        Ok(token) => {
                            tokens.push(token);

                            if main_thread_worker_state == MainThreadWorkerState::LLVMing {
                                // If the main thread token is used for LLVM work
                                // at the moment, we turn that thread into a regular
                                // LLVM worker thread, so the main thread is free
                                // to react to codegen demand.
                                main_thread_worker_state = MainThreadWorkerState::Idle;
                                running += 1;
                            }
                        }
                        Err(e) => {
                            let msg = &format!("failed to acquire jobserver token: {}", e);
                            shared_emitter.fatal(msg);
                            // Exit the coordinator thread
                            panic!("{}", msg)
                        }
                    }
                }

                Message::CodegenDone { llvm_work_item, cost } => {
                    // We keep the queue sorted by estimated processing cost,
                    // so that more expensive items are processed earlier. This
                    // is good for throughput as it gives the main thread more
                    // time to fill up the queue and it avoids scheduling
                    // expensive items to the end.
                    // Note, however, that this is not ideal for memory
                    // consumption, as LLVM module sizes are not evenly
                    // distributed.
                    let insertion_index = work_items.binary_search_by_key(&cost, |&(_, cost)| cost);
                    let insertion_index = match insertion_index {
                        Ok(idx) | Err(idx) => idx,
                    };
                    work_items.insert(insertion_index, (llvm_work_item, cost));

                    if !cgcx.opts.debugging_opts.no_parallel_llvm {
                        helper.request_token();
                    }
                    assert!(!codegen_aborted);
                    assert_eq!(main_thread_worker_state, MainThreadWorkerState::Codegenning);
                    main_thread_worker_state = MainThreadWorkerState::Idle;
                }

                Message::CodegenComplete => {
                    codegen_done = true;
                    assert!(!codegen_aborted);
                    assert_eq!(main_thread_worker_state, MainThreadWorkerState::Codegenning);
                    main_thread_worker_state = MainThreadWorkerState::Idle;
                }

                // If codegen is aborted that means translation was aborted due
                // to some normal-ish compiler error. In this situation we want
                // to exit as soon as possible, but we want to make sure all
                // existing work has finished. Flag codegen as being done, and
                // then conditions above will ensure no more work is spawned but
                // we'll keep executing this loop until `running` hits 0.
                Message::CodegenAborted => {
                    assert!(!codegen_aborted);
                    codegen_done = true;
                    codegen_aborted = true;
                    assert_eq!(main_thread_worker_state, MainThreadWorkerState::Codegenning);
                }
                Message::Done { result: Ok(compiled_module), worker_id } => {
                    free_worker(worker_id);
                    match compiled_module.kind {
                        ModuleKind::Regular => {
                            compiled_modules.push(compiled_module);
                        }
                        ModuleKind::Metadata => {
                            assert!(compiled_metadata_module.is_none());
                            compiled_metadata_module = Some(compiled_module);
                        }
                        ModuleKind::Allocator => {
                            assert!(compiled_allocator_module.is_none());
                            compiled_allocator_module = Some(compiled_module);
                        }
                    }
                }
                Message::NeedsLink { module, worker_id } => {
                    free_worker(worker_id);
                    needs_link.push(module);
                }
                Message::NeedsFatLTO { result, worker_id } => {
                    assert!(!started_lto);
                    free_worker(worker_id);
                    needs_fat_lto.push(result);
                }
                Message::NeedsThinLTO { name, thin_buffer, worker_id } => {
                    assert!(!started_lto);
                    free_worker(worker_id);
                    needs_thin_lto.push((name, thin_buffer));
                }
                Message::AddImportOnlyModule { module_data, work_product } => {
                    assert!(!started_lto);
                    assert!(!codegen_done);
                    assert_eq!(main_thread_worker_state, MainThreadWorkerState::Codegenning);
                    lto_import_only_modules.push((module_data, work_product));
                    main_thread_worker_state = MainThreadWorkerState::Idle;
                }
                // If the thread failed that means it panicked, so we abort immediately.
                Message::Done { result: Err(None), worker_id: _ } => {
                    bug!("worker thread panicked");
                }
                Message::Done { result: Err(Some(WorkerFatalError)), worker_id: _ } => {
                    return Err(());
                }
                Message::CodegenItem => bug!("the coordinator should not receive codegen requests"),
            }
        }

        let needs_link = mem::take(&mut needs_link);
        if !needs_link.is_empty() {
            assert!(compiled_modules.is_empty());
            let diag_handler = cgcx.create_diag_handler();
            let module = B::run_link(&cgcx, &diag_handler, needs_link).map_err(|_| ())?;
            let module = unsafe {
                B::codegen(&cgcx, &diag_handler, module, cgcx.config(ModuleKind::Regular))
                    .map_err(|_| ())?
            };
            compiled_modules.push(module);
        }

        // Drop to print timings
        drop(llvm_start_time);

        // Regardless of what order these modules completed in, report them to
        // the backend in the same order every time to ensure that we're handing
        // out deterministic results.
        compiled_modules.sort_by(|a, b| a.name.cmp(&b.name));

        Ok(CompiledModules {
            modules: compiled_modules,
            metadata_module: compiled_metadata_module,
            allocator_module: compiled_allocator_module,
        })
    });

    // A heuristic that determines if we have enough LLVM WorkItems in the
    // queue so that the main thread can do LLVM work instead of codegen
    fn queue_full_enough(
        items_in_queue: usize,
        workers_running: usize,
        max_workers: usize,
    ) -> bool {
        // Tune me, plz.
        items_in_queue > 0 && items_in_queue >= max_workers.saturating_sub(workers_running / 2)
    }

    fn maybe_start_llvm_timer<'a>(
        prof: &'a SelfProfilerRef,
        config: &ModuleConfig,
        llvm_start_time: &mut Option<VerboseTimingGuard<'a>>,
    ) {
        if config.time_module && llvm_start_time.is_none() {
            *llvm_start_time = Some(prof.extra_verbose_generic_activity("LLVM_passes", "crate"));
        }
    }
}

pub const CODEGEN_WORKER_ID: usize = usize::MAX;

/// `FatalError` is explicitly not `Send`.
#[must_use]
pub struct WorkerFatalError;

fn spawn_work<B: ExtraBackendMethods>(cgcx: CodegenContext<B>, work: WorkItem<B>) {
    thread::spawn(move || {
        // Set up a destructor which will fire off a message that we're done as
        // we exit.
        struct Bomb<B: ExtraBackendMethods> {
            coordinator_send: Sender<Box<dyn Any + Send>>,
            result: Option<Result<WorkItemResult<B>, FatalError>>,
            worker_id: usize,
        }
        impl<B: ExtraBackendMethods> Drop for Bomb<B> {
            fn drop(&mut self) {
                let worker_id = self.worker_id;
                let msg = match self.result.take() {
                    Some(Ok(WorkItemResult::Compiled(m))) => {
                        Message::Done::<B> { result: Ok(m), worker_id }
                    }
                    Some(Ok(WorkItemResult::NeedsLink(m))) => {
                        Message::NeedsLink::<B> { module: m, worker_id }
                    }
                    Some(Ok(WorkItemResult::NeedsFatLTO(m))) => {
                        Message::NeedsFatLTO::<B> { result: m, worker_id }
                    }
                    Some(Ok(WorkItemResult::NeedsThinLTO(name, thin_buffer))) => {
                        Message::NeedsThinLTO::<B> { name, thin_buffer, worker_id }
                    }
                    Some(Err(FatalError)) => {
                        Message::Done::<B> { result: Err(Some(WorkerFatalError)), worker_id }
                    }
                    None => Message::Done::<B> { result: Err(None), worker_id },
                };
                drop(self.coordinator_send.send(Box::new(msg)));
            }
        }

        let mut bomb = Bomb::<B> {
            coordinator_send: cgcx.coordinator_send.clone(),
            result: None,
            worker_id: cgcx.worker,
        };

        // Execute the work itself, and if it finishes successfully then flag
        // ourselves as a success as well.
        //
        // Note that we ignore any `FatalError` coming out of `execute_work_item`,
        // as a diagnostic was already sent off to the main thread - just
        // surface that there was an error in this worker.
        bomb.result = {
            let _prof_timer = work.start_profiling(&cgcx);
            Some(execute_work_item(&cgcx, work))
        };
    });
}

enum SharedEmitterMessage {
    Diagnostic(Diagnostic),
    InlineAsmError(u32, String, Level, Option<(String, Vec<InnerSpan>)>),
    AbortIfErrors,
    Fatal(String),
}

#[derive(Clone)]
pub struct SharedEmitter {
    sender: Sender<SharedEmitterMessage>,
}

pub struct SharedEmitterMain {
    receiver: Receiver<SharedEmitterMessage>,
}

impl SharedEmitter {
    pub fn new() -> (SharedEmitter, SharedEmitterMain) {
        let (sender, receiver) = channel();

        (SharedEmitter { sender }, SharedEmitterMain { receiver })
    }

    pub fn inline_asm_error(
        &self,
        cookie: u32,
        msg: String,
        level: Level,
        source: Option<(String, Vec<InnerSpan>)>,
    ) {
        drop(self.sender.send(SharedEmitterMessage::InlineAsmError(cookie, msg, level, source)));
    }

    pub fn fatal(&self, msg: &str) {
        drop(self.sender.send(SharedEmitterMessage::Fatal(msg.to_string())));
    }
}

impl Emitter for SharedEmitter {
    fn emit_diagnostic(&mut self, diag: &rustc_errors::Diagnostic) {
        drop(self.sender.send(SharedEmitterMessage::Diagnostic(Diagnostic {
            msg: diag.message(),
            code: diag.code.clone(),
            lvl: diag.level,
        })));
        for child in &diag.children {
            drop(self.sender.send(SharedEmitterMessage::Diagnostic(Diagnostic {
                msg: child.message(),
                code: None,
                lvl: child.level,
            })));
        }
        drop(self.sender.send(SharedEmitterMessage::AbortIfErrors));
    }
    fn source_map(&self) -> Option<&Lrc<SourceMap>> {
        None
    }
}

impl SharedEmitterMain {
    pub fn check(&self, sess: &Session, blocking: bool) {
        loop {
            let message = if blocking {
                match self.receiver.recv() {
                    Ok(message) => Ok(message),
                    Err(_) => Err(()),
                }
            } else {
                match self.receiver.try_recv() {
                    Ok(message) => Ok(message),
                    Err(_) => Err(()),
                }
            };

            match message {
                Ok(SharedEmitterMessage::Diagnostic(diag)) => {
                    let handler = sess.diagnostic();
                    let mut d = rustc_errors::Diagnostic::new(diag.lvl, &diag.msg);
                    if let Some(code) = diag.code {
                        d.code(code);
                    }
                    handler.emit_diagnostic(&d);
                }
                Ok(SharedEmitterMessage::InlineAsmError(cookie, msg, level, source)) => {
                    let msg = msg.strip_prefix("error: ").unwrap_or(&msg);

                    let mut err = match level {
                        Level::Error => sess.struct_err(&msg),
                        Level::Warning => sess.struct_warn(&msg),
                        Level::Note => sess.struct_note_without_error(&msg),
                        _ => bug!("Invalid inline asm diagnostic level"),
                    };

                    // If the cookie is 0 then we don't have span information.
                    if cookie != 0 {
                        let pos = BytePos::from_u32(cookie);
                        let span = Span::with_root_ctxt(pos, pos);
                        err.set_span(span);
                    };

                    // Point to the generated assembly if it is available.
                    if let Some((buffer, spans)) = source {
                        let source = sess
                            .source_map()
                            .new_source_file(FileName::inline_asm_source_code(&buffer), buffer);
                        let source_span = Span::with_root_ctxt(source.start_pos, source.end_pos);
                        let spans: Vec<_> =
                            spans.iter().map(|sp| source_span.from_inner(*sp)).collect();
                        err.span_note(spans, "instantiated into assembly here");
                    }

                    err.emit();
                }
                Ok(SharedEmitterMessage::AbortIfErrors) => {
                    sess.abort_if_errors();
                }
                Ok(SharedEmitterMessage::Fatal(msg)) => {
                    sess.fatal(&msg);
                }
                Err(_) => {
                    break;
                }
            }
        }
    }
}

pub struct OngoingCodegen<B: ExtraBackendMethods> {
    pub backend: B,
    pub crate_name: Symbol,
    pub metadata: EncodedMetadata,
    pub windows_subsystem: Option<String>,
    pub linker_info: LinkerInfo,
    pub crate_info: CrateInfo,
    pub coordinator_send: Sender<Box<dyn Any + Send>>,
    pub codegen_worker_receive: Receiver<Message<B>>,
    pub shared_emitter_main: SharedEmitterMain,
    pub future: thread::JoinHandle<Result<CompiledModules, ()>>,
    pub output_filenames: Arc<OutputFilenames>,
}

impl<B: ExtraBackendMethods> OngoingCodegen<B> {
    pub fn join(self, sess: &Session) -> (CodegenResults, FxHashMap<WorkProductId, WorkProduct>) {
        let _timer = sess.timer("finish_ongoing_codegen");

        self.shared_emitter_main.check(sess, true);
        let future = self.future;
        let compiled_modules = sess.time("join_worker_thread", || match future.join() {
            Ok(Ok(compiled_modules)) => compiled_modules,
            Ok(Err(())) => {
                sess.abort_if_errors();
                panic!("expected abort due to worker thread errors")
            }
            Err(_) => {
                bug!("panic during codegen/LLVM phase");
            }
        });

        sess.cgu_reuse_tracker.check_expected_reuse(sess.diagnostic());

        sess.abort_if_errors();

        let work_products =
            copy_all_cgu_workproducts_to_incr_comp_cache_dir(sess, &compiled_modules);
        produce_final_output_artifacts(sess, &compiled_modules, &self.output_filenames);

        // FIXME: time_llvm_passes support - does this use a global context or
        // something?
        if sess.codegen_units() == 1 && sess.time_llvm_passes() {
            self.backend.print_pass_timings()
        }

        (
            CodegenResults {
                crate_name: self.crate_name,
                metadata: self.metadata,
                windows_subsystem: self.windows_subsystem,
                linker_info: self.linker_info,
                crate_info: self.crate_info,

                modules: compiled_modules.modules,
                allocator_module: compiled_modules.allocator_module,
                metadata_module: compiled_modules.metadata_module,
            },
            work_products,
        )
    }

    pub fn submit_pre_codegened_module_to_llvm(
        &self,
        tcx: TyCtxt<'_>,
        module: ModuleCodegen<B::Module>,
    ) {
        self.wait_for_signal_to_codegen_item();
        self.check_for_errors(tcx.sess);

        // These are generally cheap and won't throw off scheduling.
        let cost = 0;
        submit_codegened_module_to_llvm(&self.backend, &self.coordinator_send, module, cost);
    }

    pub fn codegen_finished(&self, tcx: TyCtxt<'_>) {
        self.wait_for_signal_to_codegen_item();
        self.check_for_errors(tcx.sess);
        drop(self.coordinator_send.send(Box::new(Message::CodegenComplete::<B>)));
    }

    /// Consumes this context indicating that codegen was entirely aborted, and
    /// we need to exit as quickly as possible.
    ///
    /// This method blocks the current thread until all worker threads have
    /// finished, and all worker threads should have exited or be real close to
    /// exiting at this point.
    pub fn codegen_aborted(self) {
        // Signal to the coordinator it should spawn no more work and start
        // shutdown.
        drop(self.coordinator_send.send(Box::new(Message::CodegenAborted::<B>)));
        drop(self.future.join());
    }

    pub fn check_for_errors(&self, sess: &Session) {
        self.shared_emitter_main.check(sess, false);
    }

    pub fn wait_for_signal_to_codegen_item(&self) {
        match self.codegen_worker_receive.recv() {
            Ok(Message::CodegenItem) => {
                // Nothing to do
            }
            Ok(_) => panic!("unexpected message"),
            Err(_) => {
                // One of the LLVM threads must have panicked, fall through so
                // error handling can be reached.
            }
        }
    }
}

pub fn submit_codegened_module_to_llvm<B: ExtraBackendMethods>(
    _backend: &B,
    tx_to_llvm_workers: &Sender<Box<dyn Any + Send>>,
    module: ModuleCodegen<B::Module>,
    cost: u64,
) {
    let llvm_work_item = WorkItem::Optimize(module);
    drop(tx_to_llvm_workers.send(Box::new(Message::CodegenDone::<B> { llvm_work_item, cost })));
}

pub fn submit_post_lto_module_to_llvm<B: ExtraBackendMethods>(
    _backend: &B,
    tx_to_llvm_workers: &Sender<Box<dyn Any + Send>>,
    module: CachedModuleCodegen,
) {
    let llvm_work_item = WorkItem::CopyPostLtoArtifacts(module);
    drop(tx_to_llvm_workers.send(Box::new(Message::CodegenDone::<B> { llvm_work_item, cost: 0 })));
}

pub fn submit_pre_lto_module_to_llvm<B: ExtraBackendMethods>(
    _backend: &B,
    tcx: TyCtxt<'_>,
    tx_to_llvm_workers: &Sender<Box<dyn Any + Send>>,
    module: CachedModuleCodegen,
) {
    let filename = pre_lto_bitcode_filename(&module.name);
    let bc_path = in_incr_comp_dir_sess(tcx.sess, &filename);
    let file = fs::File::open(&bc_path)
        .unwrap_or_else(|e| panic!("failed to open bitcode file `{}`: {}", bc_path.display(), e));

    let mmap = unsafe {
        memmap::Mmap::map(&file).unwrap_or_else(|e| {
            panic!("failed to mmap bitcode file `{}`: {}", bc_path.display(), e)
        })
    };
    // Schedule the module to be loaded
    drop(tx_to_llvm_workers.send(Box::new(Message::AddImportOnlyModule::<B> {
        module_data: SerializedModule::FromUncompressedFile(mmap),
        work_product: module.source,
    })));
}

pub fn pre_lto_bitcode_filename(module_name: &str) -> String {
    format!("{}.{}", module_name, PRE_LTO_BC_EXT)
}

fn msvc_imps_needed(tcx: TyCtxt<'_>) -> bool {
    // This should never be true (because it's not supported). If it is true,
    // something is wrong with commandline arg validation.
    assert!(
        !(tcx.sess.opts.cg.linker_plugin_lto.enabled()
            && tcx.sess.target.target.options.is_like_windows
            && tcx.sess.opts.cg.prefer_dynamic)
    );

    tcx.sess.target.target.options.is_like_windows &&
        tcx.sess.crate_types().iter().any(|ct| *ct == CrateType::Rlib) &&
    // ThinLTO can't handle this workaround in all cases, so we don't
    // emit the `__imp_` symbols. Instead we make them unnecessary by disallowing
    // dynamic linking when linker plugin LTO is enabled.
    !tcx.sess.opts.cg.linker_plugin_lto.enabled()
}