akiyoshi ceda-cc report for CCSRNIES-MIROC32 v20210902

[charliepascoe]

FAILED:: Global attributes do not match constraints: [('frequency...

I apologise, I did not clearly explain the error with the frequency attribute in your last data upload.

Amon variables require the frequency attribute to be mon
A10dayPt variables require the frequency attribute to be 10dayPt
Aday variables require the frequency attribute to be dayPt
AdayZ variables require the frequency attribute to be dayPt
AmonZ variables require the frequency attribute to be mon

All files need the frequency attribute to be corrected.
You can see the frequency attribute needed for each variable in the MIP tables which can be found here

[charliepascoe]

FAILED:: Variable XXX not in table AdayZ
This error is found for
bro_AdayZ_CCSRNIES-MIROC32_refD1_r1i1p1f1_gnz_196001-201812.nc
clo_AdayZ_CCSRNIES-MIROC32_refD1_r1i1p1f1_gnz_196001-201812.nc
noy_AdayZ_CCSRNIES-MIROC32_refD1_r1i1p1f1_gnz_196001-201812.nc

AdayZ only has 3 variables: ta, ua and zg https://github.com/cedadev/ccmi-2022/blob/main/Tables/CCMI2022_AdayZ.json

[charliepascoe]

[pressure_levels]: FAILED:: plev coordinate not found
A plev error is found in the following data files:
ta500_Aday_CCSRNIES-MIROC32_refD1_r1i1p1f1_gn_196001-201812.nc
ua500_Aday_CCSRNIES-MIROC32_refD1_r1i1p1f1_gn_196001-201812.nc
va500_Aday_CCSRNIES-MIROC32_refD1_r1i1p1f1_gn_196001-201812.nc
zg500_Aday_CCSRNIES-MIROC32_refD1_r1i1p1f1_gn_196001-201812.nc

I had a look at the netCDF header for one of these and I can see that the plev attribute is there and has been described.
So I had a look again at a comparable data file from ECCC
/badc/ccmi/data/post-cmip6/ccmi-2022/ECCC/CMAM/refD1/r1i1p1f1/Aday/ua500/gn/v20210311/ua500_Aday_CMAM_refD1_r1i1p1f1_gn_19600101-20181231.nc

	double plev ;
		plev:units = "Pa" ;
		plev:axis = "Z" ;
		plev:positive = "down" ;
		plev:long_name = "pressure" ;
		plev:standard_name = "air_pressure" ;

And compared it to
/datacentre/arrivals/users/akiyoshi/ccmi-2022/v20210902/zg500_Aday_CCSRNIES-MIROC32_refD1_r1i1p1f1_gn_196001-201812.nc

	double plev(plev) ;
		plev:axis = "Z" ;
		plev:units = "hPa" ;
		plev:long_name = "Pressure" ;
		plev:standard_name = "air_pressure" ;
		plev:must_have_bounds = "no" ;
		plev:bounds = "N/A" ;
		plev:positive = "down" ;
		plev:GRIB_id = 100s ;
		plev:GRIB_name = "hPa" ;
		plev:actual_range = 0., 0. ;

I wonder if this error might have something to do with giving plev the coordinate (plev) when it is a single level variable?

[charliepascoe]

[height_levels]: FAILED:: height coordinate not found
This error applies to the following file:
tas_Aday_CCSRNIES-MIROC32_refD1_r1i1p1f1_gn_196001-201812.nc