Hi,
I am trying to do a high voltage 500V-400V battery with a Solis S6-EH3P20K-H inverter and using the RJXZS BMS and Stark CMR module. I am able to get successful BMS communication with the emulator and inverter. There is no error codes on the BMS or emulator. However as the inverter starts up, it goes through a minute of a Status: Waiting phase, and then as soon as that passes it triggers an OV_VBatt fault code 1053. I got successful BMS communication using BYD, Pylontech and general_HV protocols, however the error still triggers for all protocols once the waiting phase is over.
The thing is, I got this working with a Nissan Leaf using the emulator with the same inverter no problems. Only difference really is the BMS. I am wondering if anyone has seen this issue or what the cause might be. I've swapped out all the hardware just in case but it still persists.
Hi,
I am trying to do a high voltage 500V-400V battery with a Solis S6-EH3P20K-H inverter and using the RJXZS BMS and Stark CMR module. I am able to get successful BMS communication with the emulator and inverter. There is no error codes on the BMS or emulator. However as the inverter starts up, it goes through a minute of a Status: Waiting phase, and then as soon as that passes it triggers an OV_VBatt fault code 1053. I got successful BMS communication using BYD, Pylontech and general_HV protocols, however the error still triggers for all protocols once the waiting phase is over.
The thing is, I got this working with a Nissan Leaf using the emulator with the same inverter no problems. Only difference really is the BMS. I am wondering if anyone has seen this issue or what the cause might be. I've swapped out all the hardware just in case but it still persists.