Put everything in the config.*.yaml

Author: rfay

.ddev/config.sveltekit.yaml

@@ -1,3 +1,5 @@
+type: generic
+webserver_type: generic
 
 web_extra_exposed_ports:
   - name: svelte

.ddev/config.yaml

@@ -1,280 +0,0 @@
-name: test-sveltekit
-type: generic
-docroot: ""
-php_version: "8.3"
-webserver_type: generic
-xdebug_enabled: false
-additional_hostnames: []
-additional_fqdns: []
-database:
-    type: mariadb
-    version: "10.11"
-use_dns_when_possible: true
-composer_version: "2"
-web_environment: []
-corepack_enable: false
-
-# Key features of DDEV's config.yaml:
-
-# name: <projectname> # Name of the project, automatically provides
-#   http://projectname.ddev.site and https://projectname.ddev.site
-
-# type: <projecttype>  # backdrop, cakephp, craftcms, drupal, drupal6, drupal7, drupal8, drupal9, drupal10, drupal11, laravel, magento, magento2, php, shopware6, silverstripe, symfony, typo3, wordpress
-# See https://ddev.readthedocs.io/en/stable/users/quickstart/ for more
-# information on the different project types
-
-# docroot: <relative_path> # Relative path to the directory containing index.php.
-
-# php_version: "8.3"  # PHP version to use, "5.6" through "8.4"
-
-# You can explicitly specify the webimage but this
-# is not recommended, as the images are often closely tied to DDEV's' behavior,
-# so this can break upgrades.
-
-# webimage: <docker_image>  # nginx/php docker image.
-
-# database:
-#   type: <dbtype> # mysql, mariadb, postgres
-#   version: <version> # database version, like "10.11" or "8.0"
-#   MariaDB versions can be 5.5-10.8, 10.11, and 11.4.
-#   MySQL versions can be 5.5-8.0.
-#   PostgreSQL versions can be 9-17.
-
-# router_http_port: <port>  # Port to be used for http (defaults to global configuration, usually 80)
-# router_https_port: <port> # Port for https (defaults to global configuration, usually 443)
-
-# xdebug_enabled: false  # Set to true to enable Xdebug and "ddev start" or "ddev restart"
-# Note that for most people the commands
-# "ddev xdebug" to enable Xdebug and "ddev xdebug off" to disable it work better,
-# as leaving Xdebug enabled all the time is a big performance hit.
-
-# xhprof_enabled: false  # Set to true to enable Xhprof and "ddev start" or "ddev restart"
-# Note that for most people the commands
-# "ddev xhprof" to enable Xhprof and "ddev xhprof off" to disable it work better,
-# as leaving Xhprof enabled all the time is a big performance hit.
-
-# webserver_type: nginx-fpm, apache-fpm, generic
-
-# timezone: Europe/Berlin
-# If timezone is unset, DDEV will attempt to derive it from the host system timezone
-# using the $TZ environment variable or the /etc/localtime symlink.
-# This is the timezone used in the containers and by PHP;
-# it can be set to any valid timezone,
-# see https://en.wikipedia.org/wiki/List_of_tz_database_time_zones
-# For example Europe/Dublin or MST7MDT
-
-# composer_root: <relative_path>
-# Relative path to the Composer root directory from the project root. This is
-# the directory which contains the composer.json and where all Composer related
-# commands are executed.
-
-# composer_version: "2"
-# You can set it to "" or "2" (default) for Composer v2 or "1" for Composer v1
-# to use the latest major version available at the time your container is built.
-# It is also possible to use each other Composer version channel. This includes:
-#   - 2.2 (latest Composer LTS version)
-#   - stable
-#   - preview
-#   - snapshot
-# Alternatively, an explicit Composer version may be specified, for example "2.2.18".
-# To reinstall Composer after the image was built, run "ddev debug rebuild".
-
-# nodejs_version: "22"
-# change from the default system Node.js version to any other version.
-# See https://ddev.readthedocs.io/en/stable/users/configuration/config/#nodejs_version for more information
-# and https://www.npmjs.com/package/n#specifying-nodejs-versions for the full documentation,
-# Note that using of 'ddev nvm' is discouraged because "nodejs_version" is much easier to use,
-# can specify any version, and is more robust than using 'nvm'.
-
-# corepack_enable: false
-# Change to 'true' to 'corepack enable' and gain access to latest versions of yarn/pnpm
-
-# additional_hostnames:
-#  - somename
-#  - someothername
-# would provide http and https URLs for "somename.ddev.site"
-# and "someothername.ddev.site".
-
-# additional_fqdns:
-#  - example.com
-#  - sub1.example.com
-# would provide http and https URLs for "example.com" and "sub1.example.com"
-# Please take care with this because it can cause great confusion.
-
-# upload_dirs: "custom/upload/dir"
-#
-# upload_dirs:
-#   - custom/upload/dir
-#   - ../private
-#
-# would set the destination paths for ddev import-files to <docroot>/custom/upload/dir
-# When Mutagen is enabled this path is bind-mounted so that all the files
-# in the upload_dirs don't have to be synced into Mutagen.
-
-# disable_upload_dirs_warning: false
-# If true, turns off the normal warning that says
-# "You have Mutagen enabled and your 'php' project type doesn't have upload_dirs set"
-
-# ddev_version_constraint: ""
-# Example:
-# ddev_version_constraint: ">= 1.22.4"
-# This will enforce that the running ddev version is within this constraint.
-# See https://github.com/Masterminds/semver#checking-version-constraints for
-# supported constraint formats
-
-# working_dir:
-#   web: /var/www/html
-#   db: /home
-# would set the default working directory for the web and db services.
-# These values specify the destination directory for ddev ssh and the
-# directory in which commands passed into ddev exec are run.
-
-# omit_containers: [db, ddev-ssh-agent]
-# Currently only these containers are supported. Some containers can also be
-# omitted globally in the ~/.ddev/global_config.yaml. Note that if you omit
-# the "db" container, several standard features of DDEV that access the
-# database container will be unusable. In the global configuration it is also
-# possible to omit ddev-router, but not here.
-
-# performance_mode: "global"
-# DDEV offers performance optimization strategies to improve the filesystem
-# performance depending on your host system. Should be configured globally.
-#
-# If set, will override the global config. Possible values are:
-#   - "global":  uses the value from the global config.
-#   - "none":    disables performance optimization for this project.
-#   - "mutagen": enables Mutagen for this project.
-#   - "nfs":     enables NFS for this project.
-#
-# See https://ddev.readthedocs.io/en/stable/users/install/performance/#nfs
-# See https://ddev.readthedocs.io/en/stable/users/install/performance/#mutagen
-
-# fail_on_hook_fail: False
-# Decide whether 'ddev start' should be interrupted by a failing hook
-
-# host_https_port: "59002"
-# The host port binding for https can be explicitly specified. It is
-# dynamic unless otherwise specified.
-# This is not used by most people, most people use the *router* instead
-# of the localhost port.
-
-# host_webserver_port: "59001"
-# The host port binding for the ddev-webserver can be explicitly specified. It is
-# dynamic unless otherwise specified.
-# This is not used by most people, most people use the *router* instead
-# of the localhost port.
-
-# host_db_port: "59002"
-# The host port binding for the ddev-dbserver can be explicitly specified. It is dynamic
-# unless explicitly specified.
-
-# mailpit_http_port: "8025"
-# mailpit_https_port: "8026"
-# The Mailpit ports can be changed from the default 8025 and 8026
-
-# host_mailpit_port: "8025"
-# The mailpit port is not normally bound on the host at all, instead being routed
-# through ddev-router, but it can be bound directly to localhost if specified here.
-
-# webimage_extra_packages: [php7.4-tidy, php-bcmath]
-# Extra Debian packages that are needed in the webimage can be added here
-
-# dbimage_extra_packages: [telnet,netcat]
-# Extra Debian packages that are needed in the dbimage can be added here
-
-# use_dns_when_possible: true
-# If the host has internet access and the domain configured can
-# successfully be looked up, DNS will be used for hostname resolution
-# instead of editing /etc/hosts
-# Defaults to true
-
-# project_tld: ddev.site
-# The top-level domain used for project URLs
-# The default "ddev.site" allows DNS lookup via a wildcard
-# If you prefer you can change this to "ddev.local" to preserve
-# pre-v1.9 behavior.
-
-# ngrok_args: --basic-auth username:pass1234
-# Provide extra flags to the "ngrok http" command, see
-# https://ngrok.com/docs/ngrok-agent/config or run "ngrok http -h"
-
-# disable_settings_management: false
-# If true, DDEV will not create CMS-specific settings files like
-# Drupal's settings.php/settings.ddev.php or TYPO3's additional.php
-# In this case the user must provide all such settings.
-
-# You can inject environment variables into the web container with:
-# web_environment:
-#     - SOMEENV=somevalue
-#     - SOMEOTHERENV=someothervalue
-
-# no_project_mount: false
-# (Experimental) If true, DDEV will not mount the project into the web container;
-# the user is responsible for mounting it manually or via a script.
-# This is to enable experimentation with alternate file mounting strategies.
-# For advanced users only!
-
-# bind_all_interfaces: false
-# If true, host ports will be bound on all network interfaces,
-# not the localhost interface only. This means that ports
-# will be available on the local network if the host firewall
-# allows it.
-
-# default_container_timeout: 120
-# The default time that DDEV waits for all containers to become ready can be increased from
-# the default 120. This helps in importing huge databases, for example.
-
-#web_extra_exposed_ports:
-#- name: nodejs
-#  container_port: 3000
-#  http_port: 2999
-#  https_port: 3000
-#- name: something
-#  container_port: 4000
-#  https_port: 4000
-#  http_port: 3999
-# Allows a set of extra ports to be exposed via ddev-router
-# Fill in all three fields even if you don’t intend to use the https_port!
-# If you don’t add https_port, then it defaults to 0 and ddev-router will fail to start.
-#
-# The port behavior on the ddev-webserver must be arranged separately, for example
-# using web_extra_daemons.
-# For example, with a web app on port 3000 inside the container, this config would
-# expose that web app on https://<project>.ddev.site:9999 and http://<project>.ddev.site:9998
-# web_extra_exposed_ports:
-#  - name: myapp
-#    container_port: 3000
-#    http_port: 9998
-#    https_port: 9999
-
-#web_extra_daemons:
-#- name: "http-1"
-#  command: "/var/www/html/node_modules/.bin/http-server -p 3000"
-#  directory: /var/www/html
-#- name: "http-2"
-#  command: "/var/www/html/node_modules/.bin/http-server /var/www/html/sub -p 3000"
-#  directory: /var/www/html
-
-# override_config: false
-# By default, config.*.yaml files are *merged* into the configuration
-# But this means that some things can't be overridden
-# For example, if you have 'use_dns_when_possible: true'' you can't override it with a merge
-# and you can't erase existing hooks or all environment variables.
-# However, with "override_config: true" in a particular config.*.yaml file,
-# 'use_dns_when_possible: false' can override the existing values, and
-# hooks:
-#   post-start: []
-# or
-# web_environment: []
-# or
-# additional_hostnames: []
-# can have their intended affect. 'override_config' affects only behavior of the
-# config.*.yaml file it exists in.
-
-# Many DDEV commands can be extended to run tasks before or after the
-# DDEV command is executed, for example "post-start", "post-import-db",
-# "pre-composer", "post-composer"
-# See https://ddev.readthedocs.io/en/stable/users/extend/custom-commands/ for more
-# information on the commands that can be extended and the tasks you can define
-# for them. Example:
-#hooks: