From 8c8fa9f1939bc992802d4ba50b2b8ca76c547081 Mon Sep 17 00:00:00 2001 From: danielballan Date: Wed, 23 Sep 2015 14:08:07 -0400 Subject: [PATCH 1/3] MNT: Make srxplanar module py3-compatible. - Use six. - Fix simple stuff (print statements, has_key, etc.) - Remove versioning code in favor of versioneer. - Remove a couple unused imports. --- diffpy/confutils/__init__.py | 2 +- diffpy/confutils/config.py | 31 +++++++++++------------ diffpy/srxplanar/__init__.py | 2 +- diffpy/srxplanar/calculate.py | 3 ++- diffpy/srxplanar/loadimage.py | 2 +- diffpy/srxplanar/mask.py | 5 ++-- diffpy/srxplanar/saveresults.py | 3 +-- diffpy/srxplanar/srxplanar.py | 4 +-- diffpy/srxplanar/srxplanarconfig.py | 6 ----- diffpy/srxplanar/version.py | 4 +-- setup.py | 39 ----------------------------- 11 files changed, 26 insertions(+), 75 deletions(-) diff --git a/diffpy/confutils/__init__.py b/diffpy/confutils/__init__.py index 5595ca3..ab3931d 100644 --- a/diffpy/confutils/__init__.py +++ b/diffpy/confutils/__init__.py @@ -14,7 +14,7 @@ ############################################################################## # package version -from diffpy.srxplanar.version import __version__ +# from diffpy.srxplanar.version import __version__ # some convenience imports from diffpy.confutils.config import ConfigBase, ConfigBase diff --git a/diffpy/confutils/config.py b/diffpy/confutils/config.py index 2fcc9a4..241b2d9 100644 --- a/diffpy/confutils/config.py +++ b/diffpy/confutils/config.py @@ -23,11 +23,8 @@ ''' -import ConfigParser -import re +from six.moves import configparser import os -import sys -from functools import partial import argparse try: from collections import OrderedDict @@ -226,7 +223,7 @@ def _findConfigFile(self, filename=None, args=None, **kwargs): if ('--configfile' in args) or ('-c' in args): obj = self.args.parse_args(args) rv = obj.configfile - if kwargs.has_key('configfile'): + if 'configfile' in kwargs: rv = kwargs['configfile'] return rv @@ -315,7 +312,7 @@ class method, return the type of option :return: string, type of the option ''' optdata = cls._optdata[optname] - if optdata.has_key('t'): + if 't' in optdata: opttype = optdata['t'] else: value = optdata['d'] @@ -395,7 +392,7 @@ def _addOptC(cls, optname): cls._addOptSelfC(optname, optdata) # add to cls.config - secname = optdata['sec'] if optdata.has_key('sec') else 'Others' + secname = optdata['sec'] if 'sec' in optdata else 'Others' cls._configlist[secname].append(optname) if optdata.get('config', 'a') != 'n': strvalue = ', '.join(map(str, optdata['d'])) if isinstance(optdata['d'], list) else str(optdata['d']) @@ -405,14 +402,14 @@ def _addOptC(cls, optname): # transform optdata to a dict that can pass to add_argument method pargs = dict() for key in optdata.keys(): - if cls._optdatanamedict.has_key(key): + if key in cls._optdatanamedict: pargs[cls._optdatanamedict[key]] = optdata[key] pargs['default'] = argparse.SUPPRESS pargs['type'] = StrConv(opttype) # add args - if optdata.has_key('f'): + if 'f' in optdata: cls.args.add_argument(optname, **pargs) - elif optdata.has_key('s'): + elif 's' in optdata: cls.args.add_argument('--' + optname, '-' + optdata['s'], **pargs) else: cls.args.add_argument('--' + optname, **pargs) @@ -444,7 +441,7 @@ def _copyConfigtoSelf(self, optnames=None): optnames += self.config.options(secname) for optname in optnames: - if self._optdata.has_key(optname): + if optname in self._optdata: secname = self._optdata[optname]['sec'] opttype = self._getTypeStr(optname) optvalue = self.config.get(secname, optname) @@ -466,7 +463,7 @@ def _copySelftoConfig(self, optnames=None): optnames += self.config.options(secname) for optname in optnames: - if self._optdata.has_key(optname): + if optname in self._optdata: secname = self._optdata[optname]['sec'] opttype = self._getTypeStr(optname) optvalue = getattr(self, optname) @@ -485,7 +482,7 @@ def parseArgs(self, pargs): obj = self.args.parse_args(pargs) changedargs = obj.__dict__.keys() for optname in changedargs: - if self._optdata.has_key(optname): + if optname in self._optdata: setattr(self, optname, getattr(obj, optname)) # update self if len(changedargs) > 0: @@ -501,7 +498,7 @@ def parseKwargs(self, **kwargs): if kwargs != {}: changedargs = [] for optname, optvalue in kwargs.iteritems(): - if self._optdata.has_key(optname): + if optname in self._optdata: setattr(self, optname, optvalue) changedargs.append(optname) # update self @@ -591,7 +588,7 @@ def _createConfigFile(self): def writeConfig(self, filename, mode='short', changeconfigfile=True): ''' - write config to file. the file is compatiable with python package ConfigParser + write config to file. the file is compatiable with python package configparser :param filename: string, name of file :param mode: string, 'short' or 'full' ('s' or 'f'). @@ -670,7 +667,7 @@ def resetDefault(self, optnames=None): if optnames == None: optnames = self._optdata.keys() for optname in optnames: - if self._optdata.has_key(optname): + if optname in self._optdata: setattr(self, optname, self._optdata[optname]['d']) self._updateSelf() return @@ -688,7 +685,7 @@ class to add options as class attributes!!! ''' cls._preInitConfigClass() - cls.config = ConfigParser.ConfigParser(dict_type=OrderedDict) + cls.config = configparser.ConfigParser(dict_type=OrderedDict) cls.args = argparse.ArgumentParser(description=cls._description, epilog=cls._epilog, formatter_class=argparse.RawDescriptionHelpFormatter) diff --git a/diffpy/srxplanar/__init__.py b/diffpy/srxplanar/__init__.py index 3094612..d85bf9d 100644 --- a/diffpy/srxplanar/__init__.py +++ b/diffpy/srxplanar/__init__.py @@ -14,7 +14,7 @@ ############################################################################## # package version -from diffpy.srxplanar.version import __version__ +# from diffpy.srxplanar.version import __version__ # some convenience imports from diffpy.srxplanar.srxplanar import SrXplanar diff --git a/diffpy/srxplanar/calculate.py b/diffpy/srxplanar/calculate.py index f3aa395..e3f9948 100644 --- a/diffpy/srxplanar/calculate.py +++ b/diffpy/srxplanar/calculate.py @@ -17,7 +17,8 @@ import scipy.sparse as ssp import scipy.ndimage.filters as snf import scipy.ndimage.morphology as snm -from diffpy.srxplanar.srxplanarconfig import _configPropertyR +from diffpy.confutils.tools import _configPropertyR + class Calculate(object): ''' diff --git a/diffpy/srxplanar/loadimage.py b/diffpy/srxplanar/loadimage.py index f28503b..caef77e 100644 --- a/diffpy/srxplanar/loadimage.py +++ b/diffpy/srxplanar/loadimage.py @@ -18,7 +18,7 @@ import os import fnmatch import sys -from diffpy.srxplanar.srxplanarconfig import _configPropertyR +from diffpy.confutils.tools import _configPropertyR from tifffile import imsave as saveImage try: diff --git a/diffpy/srxplanar/mask.py b/diffpy/srxplanar/mask.py index e36be3e..04c2976 100644 --- a/diffpy/srxplanar/mask.py +++ b/diffpy/srxplanar/mask.py @@ -14,7 +14,6 @@ ############################################################################## import numpy as np -import scipy.sparse as ssp try: import fabio def openImage(im): @@ -22,7 +21,7 @@ def openImage(im): return rv.data except: import tifffile - print 'Only tiff or .npy mask is support since fabio is not available' + print('Only tiff or .npy mask is support since fabio is not available') def openImage(im): try: rv = tifffile.imread(im) @@ -33,7 +32,7 @@ def openImage(im): import scipy.ndimage.filters as snf import scipy.ndimage.morphology as snm import os -from diffpy.srxplanar.srxplanarconfig import _configPropertyR +from diffpy.confutils.tools import _configPropertyR class Mask(object): ''' diff --git a/diffpy/srxplanar/saveresults.py b/diffpy/srxplanar/saveresults.py index 80be1ae..bc85a30 100644 --- a/diffpy/srxplanar/saveresults.py +++ b/diffpy/srxplanar/saveresults.py @@ -14,9 +14,8 @@ ############################################################################## import numpy as np -import scipy.io import os -from diffpy.srxplanar.srxplanarconfig import _configPropertyR +from diffpy.confutils.tools import _configPropertyR class SaveResults(object): ''' diff --git a/diffpy/srxplanar/srxplanar.py b/diffpy/srxplanar/srxplanar.py index 1ac8386..f22d6ea 100644 --- a/diffpy/srxplanar/srxplanar.py +++ b/diffpy/srxplanar/srxplanar.py @@ -256,14 +256,14 @@ def process(self): self.prepareCalculation(pic=filelist[0]) self.integrateFilelist(filelist) else: - print 'No input files or configurations' + print('No input files or configurations') self.config.args.print_help() # mask creating elif self.config.createmask != '': self.createMask() # if no config is passed to srxplanar else: - print 'No input files or configurations' + print('No input files or configurations') self.config.args.print_help() return diff --git a/diffpy/srxplanar/srxplanarconfig.py b/diffpy/srxplanar/srxplanarconfig.py index 58ccce4..77acab9 100644 --- a/diffpy/srxplanar/srxplanarconfig.py +++ b/diffpy/srxplanar/srxplanarconfig.py @@ -14,13 +14,7 @@ ############################################################################## import numpy as np -import ConfigParser -import re, os, sys -from functools import partial -import argparse - from diffpy.confutils.config import ConfigBase -from diffpy.confutils.tools import _configPropertyRad, _configPropertyR, _configPropertyRW _description = \ ''' diff --git a/diffpy/srxplanar/version.py b/diffpy/srxplanar/version.py index 08b9544..6fc309a 100644 --- a/diffpy/srxplanar/version.py +++ b/diffpy/srxplanar/version.py @@ -17,11 +17,11 @@ """ from pkg_resources import resource_stream -from ConfigParser import SafeConfigParser +from six.moves.configparser import SafeConfigParser # obtain version information from the version.cfg file cp = SafeConfigParser() -cp.readfp(resource_stream(__name__, 'version.cfg')) +cp.readfp(str(resource_stream(__name__, 'version.cfg'))) __version__ = cp.get('DEFAULT', 'version') __date__ = cp.get('DEFAULT', 'date') diff --git a/setup.py b/setup.py index f76bb29..a933f20 100755 --- a/setup.py +++ b/setup.py @@ -11,48 +11,9 @@ import os from setuptools import setup, find_packages -# versioncfgfile holds version data for git commit hash and date. -# It must reside in the same directory as version.py. -MYDIR = os.path.dirname(os.path.abspath(__file__)) -versioncfgfile = os.path.join(MYDIR, 'diffpy/srxplanar/version.cfg') - -def gitinfo(): - from subprocess import Popen, PIPE - kw = dict(stdout=PIPE, cwd=MYDIR) - proc = Popen(['git', 'describe', '--match=v[[:digit:]]*'], **kw) - desc = proc.stdout.read() - proc = Popen(['git', 'log', '-1', '--format=%H %at %ai'], **kw) - glog = proc.stdout.read() - rv = {} - rv['version'] = '-'.join(desc.strip().split('-')[:-1]).lstrip('v') - rv['commit'], rv['timestamp'], rv['date'] = glog.strip().split(None, 2) - return rv - -def getversioncfg(config=versioncfgfile): - from ConfigParser import SafeConfigParser - cp = SafeConfigParser() - cp.read(config) - gitdir = os.path.join(MYDIR, '.git') - if not os.path.isdir(gitdir): return cp - d = cp.defaults() - g = gitinfo() - if g['version'] != d.get('version') or g['commit'] != d.get('commit'): - cp.set('DEFAULT', 'version', g['version']) - cp.set('DEFAULT', 'commit', g['commit']) - cp.set('DEFAULT', 'date', g['date']) - cp.set('DEFAULT', 'timestamp', g['timestamp']) - cp.write(open(config, 'w')) - return cp - -# generate version.cfg for diffpy.confutils -versioncfgfile1 = os.path.join(MYDIR, 'diffpy/confutils/version.cfg') -getversioncfg(versioncfgfile1) -versiondata = getversioncfg(versioncfgfile) - # define distribution setup_args = dict( name="diffpy.srxplanar", - version=versiondata.get('DEFAULT', 'version'), namespace_packages=['diffpy'], packages=find_packages(), include_package_data=True, From 3a1932384ec6fc9d67869c0288dd4abd32432fa0 Mon Sep 17 00:00:00 2001 From: danielballan Date: Wed, 23 Sep 2015 14:13:23 -0400 Subject: [PATCH 2/3] CLN: Remove homebrewed versioning scheme. --- .gitignore | 5 ----- diffpy/confutils/version.py | 32 -------------------------------- diffpy/srxplanar/version.py | 32 -------------------------------- 3 files changed, 69 deletions(-) delete mode 100644 diffpy/confutils/version.py delete mode 100644 diffpy/srxplanar/version.py diff --git a/.gitignore b/.gitignore index c717e59..c660ec5 100644 --- a/.gitignore +++ b/.gitignore @@ -38,8 +38,3 @@ nosetests.xml .project .pydevproject .settings - -# version information -setup.cfg -/diffpy/srxplanar/version.cfg -/diffpy/confutils/version.cfg diff --git a/diffpy/confutils/version.py b/diffpy/confutils/version.py deleted file mode 100644 index 4b9271d..0000000 --- a/diffpy/confutils/version.py +++ /dev/null @@ -1,32 +0,0 @@ -#!/usr/bin/env python -############################################################################## -# -# diffpy.confutils by DANSE Diffraction group -# Simon J. L. Billinge -# (c) 2013 Trustees of the Columbia University -# in the City of New York. All rights reserved. -# -# File coded by: Xiaohao Yang -# -# See AUTHORS.txt for a list of people who contributed. -# See LICENSE.txt for license information. -# -############################################################################## - -"""Definition of __version__, __date__, __gitsha__. -""" - -from pkg_resources import resource_stream -from ConfigParser import SafeConfigParser - -# obtain version information from the version.cfg file -cp = SafeConfigParser() -cp.readfp(resource_stream(__name__, 'version.cfg')) - -__version__ = cp.get('DEFAULT', 'version') -__date__ = cp.get('DEFAULT', 'date') -__gitsha__ = cp.get('DEFAULT', 'commit') - -del cp - -# End of file diff --git a/diffpy/srxplanar/version.py b/diffpy/srxplanar/version.py deleted file mode 100644 index 6fc309a..0000000 --- a/diffpy/srxplanar/version.py +++ /dev/null @@ -1,32 +0,0 @@ -#!/usr/bin/env python -############################################################################## -# -# diffpy.srxplanar by DANSE Diffraction group -# Simon J. L. Billinge -# (c) 2010 Trustees of the Columbia University -# in the City of New York. All rights reserved. -# -# File coded by: Xiaohao Yang -# -# See AUTHORS.txt for a list of people who contributed. -# See LICENSE.txt for license information. -# -############################################################################## - -"""Definition of __version__, __date__, __gitsha__. -""" - -from pkg_resources import resource_stream -from six.moves.configparser import SafeConfigParser - -# obtain version information from the version.cfg file -cp = SafeConfigParser() -cp.readfp(str(resource_stream(__name__, 'version.cfg'))) - -__version__ = cp.get('DEFAULT', 'version') -__date__ = cp.get('DEFAULT', 'date') -__gitsha__ = cp.get('DEFAULT', 'commit') - -del cp - -# End of file From c155049530f820f252751267d162e33362b9a09a Mon Sep 17 00:00:00 2001 From: danielballan Date: Wed, 23 Sep 2015 14:17:41 -0400 Subject: [PATCH 3/3] MNT: Use versioneer. --- .gitattributes | 1 + MANIFEST.in | 2 + diffpy/__init__.py | 4 + diffpy/_version.py | 460 +++++++++ diffpy/confutils/__init__.py | 5 +- diffpy/srxplanar/__init__.py | 5 +- setup.cfg | 8 + setup.py | 4 + versioneer.py | 1699 ++++++++++++++++++++++++++++++++++ 9 files changed, 2184 insertions(+), 4 deletions(-) create mode 100644 .gitattributes create mode 100644 diffpy/_version.py create mode 100644 setup.cfg create mode 100644 versioneer.py diff --git a/.gitattributes b/.gitattributes new file mode 100644 index 0000000..a7b3654 --- /dev/null +++ b/.gitattributes @@ -0,0 +1 @@ +diffpy/_version.py export-subst diff --git a/MANIFEST.in b/MANIFEST.in index c237fbd..a101de7 100644 --- a/MANIFEST.in +++ b/MANIFEST.in @@ -3,3 +3,5 @@ include AUTHORS.txt LICENSE.txt README.md include setup.cfg exclude MANIFEST.in recursive-exclude diffpy *.pyc +include versioneer.py +include diffpy/_version.py diff --git a/diffpy/__init__.py b/diffpy/__init__.py index 794cadc..8892071 100644 --- a/diffpy/__init__.py +++ b/diffpy/__init__.py @@ -15,3 +15,7 @@ __import__('pkg_resources').declare_namespace(__name__) + +from ._version import get_versions +__version__ = get_versions()['version'] +del get_versions diff --git a/diffpy/_version.py b/diffpy/_version.py new file mode 100644 index 0000000..6dabe97 --- /dev/null +++ b/diffpy/_version.py @@ -0,0 +1,460 @@ + +# This file helps to compute a version number in source trees obtained from +# git-archive tarball (such as those provided by githubs download-from-tag +# feature). Distribution tarballs (built by setup.py sdist) and build +# directories (produced by setup.py build) will contain a much shorter file +# that just contains the computed version number. + +# This file is released into the public domain. Generated by +# versioneer-0.15 (https://github.com/warner/python-versioneer) + +import errno +import os +import re +import subprocess +import sys + + +def get_keywords(): + # these strings will be replaced by git during git-archive. + # setup.py/versioneer.py will grep for the variable names, so they must + # each be defined on a line of their own. _version.py will just call + # get_keywords(). + git_refnames = "$Format:%d$" + git_full = "$Format:%H$" + keywords = {"refnames": git_refnames, "full": git_full} + return keywords + + +class VersioneerConfig: + pass + + +def get_config(): + # these strings are filled in when 'setup.py versioneer' creates + # _version.py + cfg = VersioneerConfig() + cfg.VCS = "git" + cfg.style = "pep440" + cfg.tag_prefix = "v" + cfg.parentdir_prefix = "None" + cfg.versionfile_source = "diffpy/_version.py" + cfg.verbose = False + return cfg + + +class NotThisMethod(Exception): + pass + + +LONG_VERSION_PY = {} +HANDLERS = {} + + +def register_vcs_handler(vcs, method): # decorator + def decorate(f): + if vcs not in HANDLERS: + HANDLERS[vcs] = {} + HANDLERS[vcs][method] = f + return f + return decorate + + +def run_command(commands, args, cwd=None, verbose=False, hide_stderr=False): + assert isinstance(commands, list) + p = None + for c in commands: + try: + dispcmd = str([c] + args) + # remember shell=False, so use git.cmd on windows, not just git + p = subprocess.Popen([c] + args, cwd=cwd, stdout=subprocess.PIPE, + stderr=(subprocess.PIPE if hide_stderr + else None)) + break + except EnvironmentError: + e = sys.exc_info()[1] + if e.errno == errno.ENOENT: + continue + if verbose: + print("unable to run %s" % dispcmd) + print(e) + return None + else: + if verbose: + print("unable to find command, tried %s" % (commands,)) + return None + stdout = p.communicate()[0].strip() + if sys.version_info[0] >= 3: + stdout = stdout.decode() + if p.returncode != 0: + if verbose: + print("unable to run %s (error)" % dispcmd) + return None + return stdout + + +def versions_from_parentdir(parentdir_prefix, root, verbose): + # Source tarballs conventionally unpack into a directory that includes + # both the project name and a version string. + dirname = os.path.basename(root) + if not dirname.startswith(parentdir_prefix): + if verbose: + print("guessing rootdir is '%s', but '%s' doesn't start with " + "prefix '%s'" % (root, dirname, parentdir_prefix)) + raise NotThisMethod("rootdir doesn't start with parentdir_prefix") + return {"version": dirname[len(parentdir_prefix):], + "full-revisionid": None, + "dirty": False, "error": None} + + +@register_vcs_handler("git", "get_keywords") +def git_get_keywords(versionfile_abs): + # the code embedded in _version.py can just fetch the value of these + # keywords. When used from setup.py, we don't want to import _version.py, + # so we do it with a regexp instead. This function is not used from + # _version.py. + keywords = {} + try: + f = open(versionfile_abs, "r") + for line in f.readlines(): + if line.strip().startswith("git_refnames ="): + mo = re.search(r'=\s*"(.*)"', line) + if mo: + keywords["refnames"] = mo.group(1) + if line.strip().startswith("git_full ="): + mo = re.search(r'=\s*"(.*)"', line) + if mo: + keywords["full"] = mo.group(1) + f.close() + except EnvironmentError: + pass + return keywords + + +@register_vcs_handler("git", "keywords") +def git_versions_from_keywords(keywords, tag_prefix, verbose): + if not keywords: + raise NotThisMethod("no keywords at all, weird") + refnames = keywords["refnames"].strip() + if refnames.startswith("$Format"): + if verbose: + print("keywords are unexpanded, not using") + raise NotThisMethod("unexpanded keywords, not a git-archive tarball") + refs = set([r.strip() for r in refnames.strip("()").split(",")]) + # starting in git-1.8.3, tags are listed as "tag: foo-1.0" instead of + # just "foo-1.0". If we see a "tag: " prefix, prefer those. + TAG = "tag: " + tags = set([r[len(TAG):] for r in refs if r.startswith(TAG)]) + if not tags: + # Either we're using git < 1.8.3, or there really are no tags. We use + # a heuristic: assume all version tags have a digit. The old git %d + # expansion behaves like git log --decorate=short and strips out the + # refs/heads/ and refs/tags/ prefixes that would let us distinguish + # between branches and tags. By ignoring refnames without digits, we + # filter out many common branch names like "release" and + # "stabilization", as well as "HEAD" and "master". + tags = set([r for r in refs if re.search(r'\d', r)]) + if verbose: + print("discarding '%s', no digits" % ",".join(refs-tags)) + if verbose: + print("likely tags: %s" % ",".join(sorted(tags))) + for ref in sorted(tags): + # sorting will prefer e.g. "2.0" over "2.0rc1" + if ref.startswith(tag_prefix): + r = ref[len(tag_prefix):] + if verbose: + print("picking %s" % r) + return {"version": r, + "full-revisionid": keywords["full"].strip(), + "dirty": False, "error": None + } + # no suitable tags, so version is "0+unknown", but full hex is still there + if verbose: + print("no suitable tags, using unknown + full revision id") + return {"version": "0+unknown", + "full-revisionid": keywords["full"].strip(), + "dirty": False, "error": "no suitable tags"} + + +@register_vcs_handler("git", "pieces_from_vcs") +def git_pieces_from_vcs(tag_prefix, root, verbose, run_command=run_command): + # this runs 'git' from the root of the source tree. This only gets called + # if the git-archive 'subst' keywords were *not* expanded, and + # _version.py hasn't already been rewritten with a short version string, + # meaning we're inside a checked out source tree. + + if not os.path.exists(os.path.join(root, ".git")): + if verbose: + print("no .git in %s" % root) + raise NotThisMethod("no .git directory") + + GITS = ["git"] + if sys.platform == "win32": + GITS = ["git.cmd", "git.exe"] + # if there is a tag, this yields TAG-NUM-gHEX[-dirty] + # if there are no tags, this yields HEX[-dirty] (no NUM) + describe_out = run_command(GITS, ["describe", "--tags", "--dirty", + "--always", "--long"], + cwd=root) + # --long was added in git-1.5.5 + if describe_out is None: + raise NotThisMethod("'git describe' failed") + describe_out = describe_out.strip() + full_out = run_command(GITS, ["rev-parse", "HEAD"], cwd=root) + if full_out is None: + raise NotThisMethod("'git rev-parse' failed") + full_out = full_out.strip() + + pieces = {} + pieces["long"] = full_out + pieces["short"] = full_out[:7] # maybe improved later + pieces["error"] = None + + # parse describe_out. It will be like TAG-NUM-gHEX[-dirty] or HEX[-dirty] + # TAG might have hyphens. + git_describe = describe_out + + # look for -dirty suffix + dirty = git_describe.endswith("-dirty") + pieces["dirty"] = dirty + if dirty: + git_describe = git_describe[:git_describe.rindex("-dirty")] + + # now we have TAG-NUM-gHEX or HEX + + if "-" in git_describe: + # TAG-NUM-gHEX + mo = re.search(r'^(.+)-(\d+)-g([0-9a-f]+)$', git_describe) + if not mo: + # unparseable. Maybe git-describe is misbehaving? + pieces["error"] = ("unable to parse git-describe output: '%s'" + % describe_out) + return pieces + + # tag + full_tag = mo.group(1) + if not full_tag.startswith(tag_prefix): + if verbose: + fmt = "tag '%s' doesn't start with prefix '%s'" + print(fmt % (full_tag, tag_prefix)) + pieces["error"] = ("tag '%s' doesn't start with prefix '%s'" + % (full_tag, tag_prefix)) + return pieces + pieces["closest-tag"] = full_tag[len(tag_prefix):] + + # distance: number of commits since tag + pieces["distance"] = int(mo.group(2)) + + # commit: short hex revision ID + pieces["short"] = mo.group(3) + + else: + # HEX: no tags + pieces["closest-tag"] = None + count_out = run_command(GITS, ["rev-list", "HEAD", "--count"], + cwd=root) + pieces["distance"] = int(count_out) # total number of commits + + return pieces + + +def plus_or_dot(pieces): + if "+" in pieces.get("closest-tag", ""): + return "." + return "+" + + +def render_pep440(pieces): + # now build up version string, with post-release "local version + # identifier". Our goal: TAG[+DISTANCE.gHEX[.dirty]] . Note that if you + # get a tagged build and then dirty it, you'll get TAG+0.gHEX.dirty + + # exceptions: + # 1: no tags. git_describe was just HEX. 0+untagged.DISTANCE.gHEX[.dirty] + + if pieces["closest-tag"]: + rendered = pieces["closest-tag"] + if pieces["distance"] or pieces["dirty"]: + rendered += plus_or_dot(pieces) + rendered += "%d.g%s" % (pieces["distance"], pieces["short"]) + if pieces["dirty"]: + rendered += ".dirty" + else: + # exception #1 + rendered = "0+untagged.%d.g%s" % (pieces["distance"], + pieces["short"]) + if pieces["dirty"]: + rendered += ".dirty" + return rendered + + +def render_pep440_pre(pieces): + # TAG[.post.devDISTANCE] . No -dirty + + # exceptions: + # 1: no tags. 0.post.devDISTANCE + + if pieces["closest-tag"]: + rendered = pieces["closest-tag"] + if pieces["distance"]: + rendered += ".post.dev%d" % pieces["distance"] + else: + # exception #1 + rendered = "0.post.dev%d" % pieces["distance"] + return rendered + + +def render_pep440_post(pieces): + # TAG[.postDISTANCE[.dev0]+gHEX] . The ".dev0" means dirty. Note that + # .dev0 sorts backwards (a dirty tree will appear "older" than the + # corresponding clean one), but you shouldn't be releasing software with + # -dirty anyways. + + # exceptions: + # 1: no tags. 0.postDISTANCE[.dev0] + + if pieces["closest-tag"]: + rendered = pieces["closest-tag"] + if pieces["distance"] or pieces["dirty"]: + rendered += ".post%d" % pieces["distance"] + if pieces["dirty"]: + rendered += ".dev0" + rendered += plus_or_dot(pieces) + rendered += "g%s" % pieces["short"] + else: + # exception #1 + rendered = "0.post%d" % pieces["distance"] + if pieces["dirty"]: + rendered += ".dev0" + rendered += "+g%s" % pieces["short"] + return rendered + + +def render_pep440_old(pieces): + # TAG[.postDISTANCE[.dev0]] . The ".dev0" means dirty. + + # exceptions: + # 1: no tags. 0.postDISTANCE[.dev0] + + if pieces["closest-tag"]: + rendered = pieces["closest-tag"] + if pieces["distance"] or pieces["dirty"]: + rendered += ".post%d" % pieces["distance"] + if pieces["dirty"]: + rendered += ".dev0" + else: + # exception #1 + rendered = "0.post%d" % pieces["distance"] + if pieces["dirty"]: + rendered += ".dev0" + return rendered + + +def render_git_describe(pieces): + # TAG[-DISTANCE-gHEX][-dirty], like 'git describe --tags --dirty + # --always' + + # exceptions: + # 1: no tags. HEX[-dirty] (note: no 'g' prefix) + + if pieces["closest-tag"]: + rendered = pieces["closest-tag"] + if pieces["distance"]: + rendered += "-%d-g%s" % (pieces["distance"], pieces["short"]) + else: + # exception #1 + rendered = pieces["short"] + if pieces["dirty"]: + rendered += "-dirty" + return rendered + + +def render_git_describe_long(pieces): + # TAG-DISTANCE-gHEX[-dirty], like 'git describe --tags --dirty + # --always -long'. The distance/hash is unconditional. + + # exceptions: + # 1: no tags. HEX[-dirty] (note: no 'g' prefix) + + if pieces["closest-tag"]: + rendered = pieces["closest-tag"] + rendered += "-%d-g%s" % (pieces["distance"], pieces["short"]) + else: + # exception #1 + rendered = pieces["short"] + if pieces["dirty"]: + rendered += "-dirty" + return rendered + + +def render(pieces, style): + if pieces["error"]: + return {"version": "unknown", + "full-revisionid": pieces.get("long"), + "dirty": None, + "error": pieces["error"]} + + if not style or style == "default": + style = "pep440" # the default + + if style == "pep440": + rendered = render_pep440(pieces) + elif style == "pep440-pre": + rendered = render_pep440_pre(pieces) + elif style == "pep440-post": + rendered = render_pep440_post(pieces) + elif style == "pep440-old": + rendered = render_pep440_old(pieces) + elif style == "git-describe": + rendered = render_git_describe(pieces) + elif style == "git-describe-long": + rendered = render_git_describe_long(pieces) + else: + raise ValueError("unknown style '%s'" % style) + + return {"version": rendered, "full-revisionid": pieces["long"], + "dirty": pieces["dirty"], "error": None} + + +def get_versions(): + # I am in _version.py, which lives at ROOT/VERSIONFILE_SOURCE. If we have + # __file__, we can work backwards from there to the root. Some + # py2exe/bbfreeze/non-CPython implementations don't do __file__, in which + # case we can only use expanded keywords. + + cfg = get_config() + verbose = cfg.verbose + + try: + return git_versions_from_keywords(get_keywords(), cfg.tag_prefix, + verbose) + except NotThisMethod: + pass + + try: + root = os.path.realpath(__file__) + # versionfile_source is the relative path from the top of the source + # tree (where the .git directory might live) to this file. Invert + # this to find the root from __file__. + for i in cfg.versionfile_source.split('/'): + root = os.path.dirname(root) + except NameError: + return {"version": "0+unknown", "full-revisionid": None, + "dirty": None, + "error": "unable to find root of source tree"} + + try: + pieces = git_pieces_from_vcs(cfg.tag_prefix, root, verbose) + return render(pieces, cfg.style) + except NotThisMethod: + pass + + try: + if cfg.parentdir_prefix: + return versions_from_parentdir(cfg.parentdir_prefix, root, verbose) + except NotThisMethod: + pass + + return {"version": "0+unknown", "full-revisionid": None, + "dirty": None, + "error": "unable to compute version"} diff --git a/diffpy/confutils/__init__.py b/diffpy/confutils/__init__.py index ab3931d..c785eca 100644 --- a/diffpy/confutils/__init__.py +++ b/diffpy/confutils/__init__.py @@ -13,8 +13,9 @@ # ############################################################################## -# package version -# from diffpy.srxplanar.version import __version__ +from .._version import get_versions +__version__ = get_versions()['version'] +del get_versions # some convenience imports from diffpy.confutils.config import ConfigBase, ConfigBase diff --git a/diffpy/srxplanar/__init__.py b/diffpy/srxplanar/__init__.py index d85bf9d..dab1fa8 100644 --- a/diffpy/srxplanar/__init__.py +++ b/diffpy/srxplanar/__init__.py @@ -13,8 +13,9 @@ # ############################################################################## -# package version -# from diffpy.srxplanar.version import __version__ +from .._version import get_versions +__version__ = get_versions()['version'] +del get_versions # some convenience imports from diffpy.srxplanar.srxplanar import SrXplanar diff --git a/setup.cfg b/setup.cfg new file mode 100644 index 0000000..e6c9898 --- /dev/null +++ b/setup.cfg @@ -0,0 +1,8 @@ +[versioneer] +VCS = git +style = pep440 +versionfile_source = diffpy/_version.py +versionfile_build = diffpy/_version.py +tag_prefix = v +#parentdir_prefix = + diff --git a/setup.py b/setup.py index a933f20..809d90c 100755 --- a/setup.py +++ b/setup.py @@ -10,10 +10,14 @@ import os from setuptools import setup, find_packages +import versioneer + # define distribution setup_args = dict( name="diffpy.srxplanar", + version=versioneer.get_version(), + cmdclass=versioneer.get_cmdclass(), namespace_packages=['diffpy'], packages=find_packages(), include_package_data=True, diff --git a/versioneer.py b/versioneer.py new file mode 100644 index 0000000..c010f63 --- /dev/null +++ b/versioneer.py @@ -0,0 +1,1699 @@ + +# Version: 0.15 + +""" +The Versioneer +============== + +* like a rocketeer, but for versions! +* https://github.com/warner/python-versioneer +* Brian Warner +* License: Public Domain +* Compatible With: python2.6, 2.7, 3.2, 3.3, 3.4, and pypy +* [![Latest Version] +(https://pypip.in/version/versioneer/badge.svg?style=flat) +](https://pypi.python.org/pypi/versioneer/) +* [![Build Status] +(https://travis-ci.org/warner/python-versioneer.png?branch=master) +](https://travis-ci.org/warner/python-versioneer) + +This is a tool for managing a recorded version number in distutils-based +python projects. The goal is to remove the tedious and error-prone "update +the embedded version string" step from your release process. Making a new +release should be as easy as recording a new tag in your version-control +system, and maybe making new tarballs. + + +## Quick Install + +* `pip install versioneer` to somewhere to your $PATH +* add a `[versioneer]` section to your setup.cfg (see below) +* run `versioneer install` in your source tree, commit the results + +## Version Identifiers + +Source trees come from a variety of places: + +* a version-control system checkout (mostly used by developers) +* a nightly tarball, produced by build automation +* a snapshot tarball, produced by a web-based VCS browser, like github's + "tarball from tag" feature +* a release tarball, produced by "setup.py sdist", distributed through PyPI + +Within each source tree, the version identifier (either a string or a number, +this tool is format-agnostic) can come from a variety of places: + +* ask the VCS tool itself, e.g. "git describe" (for checkouts), which knows + about recent "tags" and an absolute revision-id +* the name of the directory into which the tarball was unpacked +* an expanded VCS keyword ($Id$, etc) +* a `_version.py` created by some earlier build step + +For released software, the version identifier is closely related to a VCS +tag. Some projects use tag names that include more than just the version +string (e.g. "myproject-1.2" instead of just "1.2"), in which case the tool +needs to strip the tag prefix to extract the version identifier. For +unreleased software (between tags), the version identifier should provide +enough information to help developers recreate the same tree, while also +giving them an idea of roughly how old the tree is (after version 1.2, before +version 1.3). Many VCS systems can report a description that captures this, +for example `git describe --tags --dirty --always` reports things like +"0.7-1-g574ab98-dirty" to indicate that the checkout is one revision past the +0.7 tag, has a unique revision id of "574ab98", and is "dirty" (it has +uncommitted changes. + +The version identifier is used for multiple purposes: + +* to allow the module to self-identify its version: `myproject.__version__` +* to choose a name and prefix for a 'setup.py sdist' tarball + +## Theory of Operation + +Versioneer works by adding a special `_version.py` file into your source +tree, where your `__init__.py` can import it. This `_version.py` knows how to +dynamically ask the VCS tool for version information at import time. + +`_version.py` also contains `$Revision$` markers, and the installation +process marks `_version.py` to have this marker rewritten with a tag name +during the `git archive` command. As a result, generated tarballs will +contain enough information to get the proper version. + +To allow `setup.py` to compute a version too, a `versioneer.py` is added to +the top level of your source tree, next to `setup.py` and the `setup.cfg` +that configures it. This overrides several distutils/setuptools commands to +compute the version when invoked, and changes `setup.py build` and `setup.py +sdist` to replace `_version.py` with a small static file that contains just +the generated version data. + +## Installation + +First, decide on values for the following configuration variables: + +* `VCS`: the version control system you use. Currently accepts "git". + +* `style`: the style of version string to be produced. See "Styles" below for + details. Defaults to "pep440", which looks like + `TAG[+DISTANCE.gSHORTHASH[.dirty]]`. + +* `versionfile_source`: + + A project-relative pathname into which the generated version strings should + be written. This is usually a `_version.py` next to your project's main + `__init__.py` file, so it can be imported at runtime. If your project uses + `src/myproject/__init__.py`, this should be `src/myproject/_version.py`. + This file should be checked in to your VCS as usual: the copy created below + by `setup.py setup_versioneer` will include code that parses expanded VCS + keywords in generated tarballs. The 'build' and 'sdist' commands will + replace it with a copy that has just the calculated version string. + + This must be set even if your project does not have any modules (and will + therefore never import `_version.py`), since "setup.py sdist" -based trees + still need somewhere to record the pre-calculated version strings. Anywhere + in the source tree should do. If there is a `__init__.py` next to your + `_version.py`, the `setup.py setup_versioneer` command (described below) + will append some `__version__`-setting assignments, if they aren't already + present. + +* `versionfile_build`: + + Like `versionfile_source`, but relative to the build directory instead of + the source directory. These will differ when your setup.py uses + 'package_dir='. If you have `package_dir={'myproject': 'src/myproject'}`, + then you will probably have `versionfile_build='myproject/_version.py'` and + `versionfile_source='src/myproject/_version.py'`. + + If this is set to None, then `setup.py build` will not attempt to rewrite + any `_version.py` in the built tree. If your project does not have any + libraries (e.g. if it only builds a script), then you should use + `versionfile_build = None` and override `distutils.command.build_scripts` + to explicitly insert a copy of `versioneer.get_version()` into your + generated script. + +* `tag_prefix`: + + a string, like 'PROJECTNAME-', which appears at the start of all VCS tags. + If your tags look like 'myproject-1.2.0', then you should use + tag_prefix='myproject-'. If you use unprefixed tags like '1.2.0', this + should be an empty string. + +* `parentdir_prefix`: + + a optional string, frequently the same as tag_prefix, which appears at the + start of all unpacked tarball filenames. If your tarball unpacks into + 'myproject-1.2.0', this should be 'myproject-'. To disable this feature, + just omit the field from your `setup.cfg`. + +This tool provides one script, named `versioneer`. That script has one mode, +"install", which writes a copy of `versioneer.py` into the current directory +and runs `versioneer.py setup` to finish the installation. + +To versioneer-enable your project: + +* 1: Modify your `setup.cfg`, adding a section named `[versioneer]` and + populating it with the configuration values you decided earlier (note that + the option names are not case-sensitive): + + ```` + [versioneer] + VCS = git + style = pep440 + versionfile_source = src/myproject/_version.py + versionfile_build = myproject/_version.py + tag_prefix = "" + parentdir_prefix = myproject- + ```` + +* 2: Run `versioneer install`. This will do the following: + + * copy `versioneer.py` into the top of your source tree + * create `_version.py` in the right place (`versionfile_source`) + * modify your `__init__.py` (if one exists next to `_version.py`) to define + `__version__` (by calling a function from `_version.py`) + * modify your `MANIFEST.in` to include both `versioneer.py` and the + generated `_version.py` in sdist tarballs + + `versioneer install` will complain about any problems it finds with your + `setup.py` or `setup.cfg`. Run it multiple times until you have fixed all + the problems. + +* 3: add a `import versioneer` to your setup.py, and add the following + arguments to the setup() call: + + version=versioneer.get_version(), + cmdclass=versioneer.get_cmdclass(), + +* 4: commit these changes to your VCS. To make sure you won't forget, + `versioneer install` will mark everything it touched for addition using + `git add`. Don't forget to add `setup.py` and `setup.cfg` too. + +## Post-Installation Usage + +Once established, all uses of your tree from a VCS checkout should get the +current version string. All generated tarballs should include an embedded +version string (so users who unpack them will not need a VCS tool installed). + +If you distribute your project through PyPI, then the release process should +boil down to two steps: + +* 1: git tag 1.0 +* 2: python setup.py register sdist upload + +If you distribute it through github (i.e. users use github to generate +tarballs with `git archive`), the process is: + +* 1: git tag 1.0 +* 2: git push; git push --tags + +Versioneer will report "0+untagged.NUMCOMMITS.gHASH" until your tree has at +least one tag in its history. + +## Version-String Flavors + +Code which uses Versioneer can learn about its version string at runtime by +importing `_version` from your main `__init__.py` file and running the +`get_versions()` function. From the "outside" (e.g. in `setup.py`), you can +import the top-level `versioneer.py` and run `get_versions()`. + +Both functions return a dictionary with different flavors of version +information: + +* `['version']`: A condensed version string, rendered using the selected + style. This is the most commonly used value for the project's version + string. The default "pep440" style yields strings like `0.11`, + `0.11+2.g1076c97`, or `0.11+2.g1076c97.dirty`. See the "Styles" section + below for alternative styles. + +* `['full-revisionid']`: detailed revision identifier. For Git, this is the + full SHA1 commit id, e.g. "1076c978a8d3cfc70f408fe5974aa6c092c949ac". + +* `['dirty']`: a boolean, True if the tree has uncommitted changes. Note that + this is only accurate if run in a VCS checkout, otherwise it is likely to + be False or None + +* `['error']`: if the version string could not be computed, this will be set + to a string describing the problem, otherwise it will be None. It may be + useful to throw an exception in setup.py if this is set, to avoid e.g. + creating tarballs with a version string of "unknown". + +Some variants are more useful than others. Including `full-revisionid` in a +bug report should allow developers to reconstruct the exact code being tested +(or indicate the presence of local changes that should be shared with the +developers). `version` is suitable for display in an "about" box or a CLI +`--version` output: it can be easily compared against release notes and lists +of bugs fixed in various releases. + +The installer adds the following text to your `__init__.py` to place a basic +version in `YOURPROJECT.__version__`: + + from ._version import get_versions + __version__ = get_versions()['version'] + del get_versions + +## Styles + +The setup.cfg `style=` configuration controls how the VCS information is +rendered into a version string. + +The default style, "pep440", produces a PEP440-compliant string, equal to the +un-prefixed tag name for actual releases, and containing an additional "local +version" section with more detail for in-between builds. For Git, this is +TAG[+DISTANCE.gHEX[.dirty]] , using information from `git describe --tags +--dirty --always`. For example "0.11+2.g1076c97.dirty" indicates that the +tree is like the "1076c97" commit but has uncommitted changes (".dirty"), and +that this commit is two revisions ("+2") beyond the "0.11" tag. For released +software (exactly equal to a known tag), the identifier will only contain the +stripped tag, e.g. "0.11". + +Other styles are available. See details.md in the Versioneer source tree for +descriptions. + +## Debugging + +Versioneer tries to avoid fatal errors: if something goes wrong, it will tend +to return a version of "0+unknown". To investigate the problem, run `setup.py +version`, which will run the version-lookup code in a verbose mode, and will +display the full contents of `get_versions()` (including the `error` string, +which may help identify what went wrong). + +## Updating Versioneer + +To upgrade your project to a new release of Versioneer, do the following: + +* install the new Versioneer (`pip install -U versioneer` or equivalent) +* edit `setup.cfg`, if necessary, to include any new configuration settings + indicated by the release notes +* re-run `versioneer install` in your source tree, to replace + `SRC/_version.py` +* commit any changed files + +### Upgrading to 0.15 + +Starting with this version, Versioneer is configured with a `[versioneer]` +section in your `setup.cfg` file. Earlier versions required the `setup.py` to +set attributes on the `versioneer` module immediately after import. The new +version will refuse to run (raising an exception during import) until you +have provided the necessary `setup.cfg` section. + +In addition, the Versioneer package provides an executable named +`versioneer`, and the installation process is driven by running `versioneer +install`. In 0.14 and earlier, the executable was named +`versioneer-installer` and was run without an argument. + +### Upgrading to 0.14 + +0.14 changes the format of the version string. 0.13 and earlier used +hyphen-separated strings like "0.11-2-g1076c97-dirty". 0.14 and beyond use a +plus-separated "local version" section strings, with dot-separated +components, like "0.11+2.g1076c97". PEP440-strict tools did not like the old +format, but should be ok with the new one. + +### Upgrading from 0.11 to 0.12 + +Nothing special. + +### Upgrading from 0.10 to 0.11 + +You must add a `versioneer.VCS = "git"` to your `setup.py` before re-running +`setup.py setup_versioneer`. This will enable the use of additional +version-control systems (SVN, etc) in the future. + +## Future Directions + +This tool is designed to make it easily extended to other version-control +systems: all VCS-specific components are in separate directories like +src/git/ . The top-level `versioneer.py` script is assembled from these +components by running make-versioneer.py . In the future, make-versioneer.py +will take a VCS name as an argument, and will construct a version of +`versioneer.py` that is specific to the given VCS. It might also take the +configuration arguments that are currently provided manually during +installation by editing setup.py . Alternatively, it might go the other +direction and include code from all supported VCS systems, reducing the +number of intermediate scripts. + + +## License + +To make Versioneer easier to embed, all its code is hereby released into the +public domain. The `_version.py` that it creates is also in the public +domain. + +""" + +from __future__ import print_function +try: + import configparser +except ImportError: + import ConfigParser as configparser +import errno +import json +import os +import re +import subprocess +import sys + + +class VersioneerConfig: + pass + + +def get_root(): + # we require that all commands are run from the project root, i.e. the + # directory that contains setup.py, setup.cfg, and versioneer.py . + root = os.path.realpath(os.path.abspath(os.getcwd())) + setup_py = os.path.join(root, "setup.py") + versioneer_py = os.path.join(root, "versioneer.py") + if not (os.path.exists(setup_py) or os.path.exists(versioneer_py)): + # allow 'python path/to/setup.py COMMAND' + root = os.path.dirname(os.path.realpath(os.path.abspath(sys.argv[0]))) + setup_py = os.path.join(root, "setup.py") + versioneer_py = os.path.join(root, "versioneer.py") + if not (os.path.exists(setup_py) or os.path.exists(versioneer_py)): + err = ("Versioneer was unable to run the project root directory. " + "Versioneer requires setup.py to be executed from " + "its immediate directory (like 'python setup.py COMMAND'), " + "or in a way that lets it use sys.argv[0] to find the root " + "(like 'python path/to/setup.py COMMAND').") + raise VersioneerBadRootError(err) + try: + # Certain runtime workflows (setup.py install/develop in a setuptools + # tree) execute all dependencies in a single python process, so + # "versioneer" may be imported multiple times, and python's shared + # module-import table will cache the first one. So we can't use + # os.path.dirname(__file__), as that will find whichever + # versioneer.py was first imported, even in later projects. + me = os.path.realpath(os.path.abspath(__file__)) + if os.path.splitext(me)[0] != os.path.splitext(versioneer_py)[0]: + print("Warning: build in %s is using versioneer.py from %s" + % (os.path.dirname(me), versioneer_py)) + except NameError: + pass + return root + + +def get_config_from_root(root): + # This might raise EnvironmentError (if setup.cfg is missing), or + # configparser.NoSectionError (if it lacks a [versioneer] section), or + # configparser.NoOptionError (if it lacks "VCS="). See the docstring at + # the top of versioneer.py for instructions on writing your setup.cfg . + setup_cfg = os.path.join(root, "setup.cfg") + parser = configparser.SafeConfigParser() + with open(setup_cfg, "r") as f: + parser.readfp(f) + VCS = parser.get("versioneer", "VCS") # mandatory + + def get(parser, name): + if parser.has_option("versioneer", name): + return parser.get("versioneer", name) + return None + cfg = VersioneerConfig() + cfg.VCS = VCS + cfg.style = get(parser, "style") or "" + cfg.versionfile_source = get(parser, "versionfile_source") + cfg.versionfile_build = get(parser, "versionfile_build") + cfg.tag_prefix = get(parser, "tag_prefix") + cfg.parentdir_prefix = get(parser, "parentdir_prefix") + cfg.verbose = get(parser, "verbose") + return cfg + + +class NotThisMethod(Exception): + pass + +# these dictionaries contain VCS-specific tools +LONG_VERSION_PY = {} +HANDLERS = {} + + +def register_vcs_handler(vcs, method): # decorator + def decorate(f): + if vcs not in HANDLERS: + HANDLERS[vcs] = {} + HANDLERS[vcs][method] = f + return f + return decorate + + +def run_command(commands, args, cwd=None, verbose=False, hide_stderr=False): + assert isinstance(commands, list) + p = None + for c in commands: + try: + dispcmd = str([c] + args) + # remember shell=False, so use git.cmd on windows, not just git + p = subprocess.Popen([c] + args, cwd=cwd, stdout=subprocess.PIPE, + stderr=(subprocess.PIPE if hide_stderr + else None)) + break + except EnvironmentError: + e = sys.exc_info()[1] + if e.errno == errno.ENOENT: + continue + if verbose: + print("unable to run %s" % dispcmd) + print(e) + return None + else: + if verbose: + print("unable to find command, tried %s" % (commands,)) + return None + stdout = p.communicate()[0].strip() + if sys.version_info[0] >= 3: + stdout = stdout.decode() + if p.returncode != 0: + if verbose: + print("unable to run %s (error)" % dispcmd) + return None + return stdout +LONG_VERSION_PY['git'] = ''' +# This file helps to compute a version number in source trees obtained from +# git-archive tarball (such as those provided by githubs download-from-tag +# feature). Distribution tarballs (built by setup.py sdist) and build +# directories (produced by setup.py build) will contain a much shorter file +# that just contains the computed version number. + +# This file is released into the public domain. Generated by +# versioneer-0.15 (https://github.com/warner/python-versioneer) + +import errno +import os +import re +import subprocess +import sys + + +def get_keywords(): + # these strings will be replaced by git during git-archive. + # setup.py/versioneer.py will grep for the variable names, so they must + # each be defined on a line of their own. _version.py will just call + # get_keywords(). + git_refnames = "%(DOLLAR)sFormat:%%d%(DOLLAR)s" + git_full = "%(DOLLAR)sFormat:%%H%(DOLLAR)s" + keywords = {"refnames": git_refnames, "full": git_full} + return keywords + + +class VersioneerConfig: + pass + + +def get_config(): + # these strings are filled in when 'setup.py versioneer' creates + # _version.py + cfg = VersioneerConfig() + cfg.VCS = "git" + cfg.style = "%(STYLE)s" + cfg.tag_prefix = "%(TAG_PREFIX)s" + cfg.parentdir_prefix = "%(PARENTDIR_PREFIX)s" + cfg.versionfile_source = "%(VERSIONFILE_SOURCE)s" + cfg.verbose = False + return cfg + + +class NotThisMethod(Exception): + pass + + +LONG_VERSION_PY = {} +HANDLERS = {} + + +def register_vcs_handler(vcs, method): # decorator + def decorate(f): + if vcs not in HANDLERS: + HANDLERS[vcs] = {} + HANDLERS[vcs][method] = f + return f + return decorate + + +def run_command(commands, args, cwd=None, verbose=False, hide_stderr=False): + assert isinstance(commands, list) + p = None + for c in commands: + try: + dispcmd = str([c] + args) + # remember shell=False, so use git.cmd on windows, not just git + p = subprocess.Popen([c] + args, cwd=cwd, stdout=subprocess.PIPE, + stderr=(subprocess.PIPE if hide_stderr + else None)) + break + except EnvironmentError: + e = sys.exc_info()[1] + if e.errno == errno.ENOENT: + continue + if verbose: + print("unable to run %%s" %% dispcmd) + print(e) + return None + else: + if verbose: + print("unable to find command, tried %%s" %% (commands,)) + return None + stdout = p.communicate()[0].strip() + if sys.version_info[0] >= 3: + stdout = stdout.decode() + if p.returncode != 0: + if verbose: + print("unable to run %%s (error)" %% dispcmd) + return None + return stdout + + +def versions_from_parentdir(parentdir_prefix, root, verbose): + # Source tarballs conventionally unpack into a directory that includes + # both the project name and a version string. + dirname = os.path.basename(root) + if not dirname.startswith(parentdir_prefix): + if verbose: + print("guessing rootdir is '%%s', but '%%s' doesn't start with " + "prefix '%%s'" %% (root, dirname, parentdir_prefix)) + raise NotThisMethod("rootdir doesn't start with parentdir_prefix") + return {"version": dirname[len(parentdir_prefix):], + "full-revisionid": None, + "dirty": False, "error": None} + + +@register_vcs_handler("git", "get_keywords") +def git_get_keywords(versionfile_abs): + # the code embedded in _version.py can just fetch the value of these + # keywords. When used from setup.py, we don't want to import _version.py, + # so we do it with a regexp instead. This function is not used from + # _version.py. + keywords = {} + try: + f = open(versionfile_abs, "r") + for line in f.readlines(): + if line.strip().startswith("git_refnames ="): + mo = re.search(r'=\s*"(.*)"', line) + if mo: + keywords["refnames"] = mo.group(1) + if line.strip().startswith("git_full ="): + mo = re.search(r'=\s*"(.*)"', line) + if mo: + keywords["full"] = mo.group(1) + f.close() + except EnvironmentError: + pass + return keywords + + +@register_vcs_handler("git", "keywords") +def git_versions_from_keywords(keywords, tag_prefix, verbose): + if not keywords: + raise NotThisMethod("no keywords at all, weird") + refnames = keywords["refnames"].strip() + if refnames.startswith("$Format"): + if verbose: + print("keywords are unexpanded, not using") + raise NotThisMethod("unexpanded keywords, not a git-archive tarball") + refs = set([r.strip() for r in refnames.strip("()").split(",")]) + # starting in git-1.8.3, tags are listed as "tag: foo-1.0" instead of + # just "foo-1.0". If we see a "tag: " prefix, prefer those. + TAG = "tag: " + tags = set([r[len(TAG):] for r in refs if r.startswith(TAG)]) + if not tags: + # Either we're using git < 1.8.3, or there really are no tags. We use + # a heuristic: assume all version tags have a digit. The old git %%d + # expansion behaves like git log --decorate=short and strips out the + # refs/heads/ and refs/tags/ prefixes that would let us distinguish + # between branches and tags. By ignoring refnames without digits, we + # filter out many common branch names like "release" and + # "stabilization", as well as "HEAD" and "master". + tags = set([r for r in refs if re.search(r'\d', r)]) + if verbose: + print("discarding '%%s', no digits" %% ",".join(refs-tags)) + if verbose: + print("likely tags: %%s" %% ",".join(sorted(tags))) + for ref in sorted(tags): + # sorting will prefer e.g. "2.0" over "2.0rc1" + if ref.startswith(tag_prefix): + r = ref[len(tag_prefix):] + if verbose: + print("picking %%s" %% r) + return {"version": r, + "full-revisionid": keywords["full"].strip(), + "dirty": False, "error": None + } + # no suitable tags, so version is "0+unknown", but full hex is still there + if verbose: + print("no suitable tags, using unknown + full revision id") + return {"version": "0+unknown", + "full-revisionid": keywords["full"].strip(), + "dirty": False, "error": "no suitable tags"} + + +@register_vcs_handler("git", "pieces_from_vcs") +def git_pieces_from_vcs(tag_prefix, root, verbose, run_command=run_command): + # this runs 'git' from the root of the source tree. This only gets called + # if the git-archive 'subst' keywords were *not* expanded, and + # _version.py hasn't already been rewritten with a short version string, + # meaning we're inside a checked out source tree. + + if not os.path.exists(os.path.join(root, ".git")): + if verbose: + print("no .git in %%s" %% root) + raise NotThisMethod("no .git directory") + + GITS = ["git"] + if sys.platform == "win32": + GITS = ["git.cmd", "git.exe"] + # if there is a tag, this yields TAG-NUM-gHEX[-dirty] + # if there are no tags, this yields HEX[-dirty] (no NUM) + describe_out = run_command(GITS, ["describe", "--tags", "--dirty", + "--always", "--long"], + cwd=root) + # --long was added in git-1.5.5 + if describe_out is None: + raise NotThisMethod("'git describe' failed") + describe_out = describe_out.strip() + full_out = run_command(GITS, ["rev-parse", "HEAD"], cwd=root) + if full_out is None: + raise NotThisMethod("'git rev-parse' failed") + full_out = full_out.strip() + + pieces = {} + pieces["long"] = full_out + pieces["short"] = full_out[:7] # maybe improved later + pieces["error"] = None + + # parse describe_out. It will be like TAG-NUM-gHEX[-dirty] or HEX[-dirty] + # TAG might have hyphens. + git_describe = describe_out + + # look for -dirty suffix + dirty = git_describe.endswith("-dirty") + pieces["dirty"] = dirty + if dirty: + git_describe = git_describe[:git_describe.rindex("-dirty")] + + # now we have TAG-NUM-gHEX or HEX + + if "-" in git_describe: + # TAG-NUM-gHEX + mo = re.search(r'^(.+)-(\d+)-g([0-9a-f]+)$', git_describe) + if not mo: + # unparseable. Maybe git-describe is misbehaving? + pieces["error"] = ("unable to parse git-describe output: '%%s'" + %% describe_out) + return pieces + + # tag + full_tag = mo.group(1) + if not full_tag.startswith(tag_prefix): + if verbose: + fmt = "tag '%%s' doesn't start with prefix '%%s'" + print(fmt %% (full_tag, tag_prefix)) + pieces["error"] = ("tag '%%s' doesn't start with prefix '%%s'" + %% (full_tag, tag_prefix)) + return pieces + pieces["closest-tag"] = full_tag[len(tag_prefix):] + + # distance: number of commits since tag + pieces["distance"] = int(mo.group(2)) + + # commit: short hex revision ID + pieces["short"] = mo.group(3) + + else: + # HEX: no tags + pieces["closest-tag"] = None + count_out = run_command(GITS, ["rev-list", "HEAD", "--count"], + cwd=root) + pieces["distance"] = int(count_out) # total number of commits + + return pieces + + +def plus_or_dot(pieces): + if "+" in pieces.get("closest-tag", ""): + return "." + return "+" + + +def render_pep440(pieces): + # now build up version string, with post-release "local version + # identifier". Our goal: TAG[+DISTANCE.gHEX[.dirty]] . Note that if you + # get a tagged build and then dirty it, you'll get TAG+0.gHEX.dirty + + # exceptions: + # 1: no tags. git_describe was just HEX. 0+untagged.DISTANCE.gHEX[.dirty] + + if pieces["closest-tag"]: + rendered = pieces["closest-tag"] + if pieces["distance"] or pieces["dirty"]: + rendered += plus_or_dot(pieces) + rendered += "%%d.g%%s" %% (pieces["distance"], pieces["short"]) + if pieces["dirty"]: + rendered += ".dirty" + else: + # exception #1 + rendered = "0+untagged.%%d.g%%s" %% (pieces["distance"], + pieces["short"]) + if pieces["dirty"]: + rendered += ".dirty" + return rendered + + +def render_pep440_pre(pieces): + # TAG[.post.devDISTANCE] . No -dirty + + # exceptions: + # 1: no tags. 0.post.devDISTANCE + + if pieces["closest-tag"]: + rendered = pieces["closest-tag"] + if pieces["distance"]: + rendered += ".post.dev%%d" %% pieces["distance"] + else: + # exception #1 + rendered = "0.post.dev%%d" %% pieces["distance"] + return rendered + + +def render_pep440_post(pieces): + # TAG[.postDISTANCE[.dev0]+gHEX] . The ".dev0" means dirty. Note that + # .dev0 sorts backwards (a dirty tree will appear "older" than the + # corresponding clean one), but you shouldn't be releasing software with + # -dirty anyways. + + # exceptions: + # 1: no tags. 0.postDISTANCE[.dev0] + + if pieces["closest-tag"]: + rendered = pieces["closest-tag"] + if pieces["distance"] or pieces["dirty"]: + rendered += ".post%%d" %% pieces["distance"] + if pieces["dirty"]: + rendered += ".dev0" + rendered += plus_or_dot(pieces) + rendered += "g%%s" %% pieces["short"] + else: + # exception #1 + rendered = "0.post%%d" %% pieces["distance"] + if pieces["dirty"]: + rendered += ".dev0" + rendered += "+g%%s" %% pieces["short"] + return rendered + + +def render_pep440_old(pieces): + # TAG[.postDISTANCE[.dev0]] . The ".dev0" means dirty. + + # exceptions: + # 1: no tags. 0.postDISTANCE[.dev0] + + if pieces["closest-tag"]: + rendered = pieces["closest-tag"] + if pieces["distance"] or pieces["dirty"]: + rendered += ".post%%d" %% pieces["distance"] + if pieces["dirty"]: + rendered += ".dev0" + else: + # exception #1 + rendered = "0.post%%d" %% pieces["distance"] + if pieces["dirty"]: + rendered += ".dev0" + return rendered + + +def render_git_describe(pieces): + # TAG[-DISTANCE-gHEX][-dirty], like 'git describe --tags --dirty + # --always' + + # exceptions: + # 1: no tags. HEX[-dirty] (note: no 'g' prefix) + + if pieces["closest-tag"]: + rendered = pieces["closest-tag"] + if pieces["distance"]: + rendered += "-%%d-g%%s" %% (pieces["distance"], pieces["short"]) + else: + # exception #1 + rendered = pieces["short"] + if pieces["dirty"]: + rendered += "-dirty" + return rendered + + +def render_git_describe_long(pieces): + # TAG-DISTANCE-gHEX[-dirty], like 'git describe --tags --dirty + # --always -long'. The distance/hash is unconditional. + + # exceptions: + # 1: no tags. HEX[-dirty] (note: no 'g' prefix) + + if pieces["closest-tag"]: + rendered = pieces["closest-tag"] + rendered += "-%%d-g%%s" %% (pieces["distance"], pieces["short"]) + else: + # exception #1 + rendered = pieces["short"] + if pieces["dirty"]: + rendered += "-dirty" + return rendered + + +def render(pieces, style): + if pieces["error"]: + return {"version": "unknown", + "full-revisionid": pieces.get("long"), + "dirty": None, + "error": pieces["error"]} + + if not style or style == "default": + style = "pep440" # the default + + if style == "pep440": + rendered = render_pep440(pieces) + elif style == "pep440-pre": + rendered = render_pep440_pre(pieces) + elif style == "pep440-post": + rendered = render_pep440_post(pieces) + elif style == "pep440-old": + rendered = render_pep440_old(pieces) + elif style == "git-describe": + rendered = render_git_describe(pieces) + elif style == "git-describe-long": + rendered = render_git_describe_long(pieces) + else: + raise ValueError("unknown style '%%s'" %% style) + + return {"version": rendered, "full-revisionid": pieces["long"], + "dirty": pieces["dirty"], "error": None} + + +def get_versions(): + # I am in _version.py, which lives at ROOT/VERSIONFILE_SOURCE. If we have + # __file__, we can work backwards from there to the root. Some + # py2exe/bbfreeze/non-CPython implementations don't do __file__, in which + # case we can only use expanded keywords. + + cfg = get_config() + verbose = cfg.verbose + + try: + return git_versions_from_keywords(get_keywords(), cfg.tag_prefix, + verbose) + except NotThisMethod: + pass + + try: + root = os.path.realpath(__file__) + # versionfile_source is the relative path from the top of the source + # tree (where the .git directory might live) to this file. Invert + # this to find the root from __file__. + for i in cfg.versionfile_source.split('/'): + root = os.path.dirname(root) + except NameError: + return {"version": "0+unknown", "full-revisionid": None, + "dirty": None, + "error": "unable to find root of source tree"} + + try: + pieces = git_pieces_from_vcs(cfg.tag_prefix, root, verbose) + return render(pieces, cfg.style) + except NotThisMethod: + pass + + try: + if cfg.parentdir_prefix: + return versions_from_parentdir(cfg.parentdir_prefix, root, verbose) + except NotThisMethod: + pass + + return {"version": "0+unknown", "full-revisionid": None, + "dirty": None, + "error": "unable to compute version"} +''' + + +@register_vcs_handler("git", "get_keywords") +def git_get_keywords(versionfile_abs): + # the code embedded in _version.py can just fetch the value of these + # keywords. When used from setup.py, we don't want to import _version.py, + # so we do it with a regexp instead. This function is not used from + # _version.py. + keywords = {} + try: + f = open(versionfile_abs, "r") + for line in f.readlines(): + if line.strip().startswith("git_refnames ="): + mo = re.search(r'=\s*"(.*)"', line) + if mo: + keywords["refnames"] = mo.group(1) + if line.strip().startswith("git_full ="): + mo = re.search(r'=\s*"(.*)"', line) + if mo: + keywords["full"] = mo.group(1) + f.close() + except EnvironmentError: + pass + return keywords + + +@register_vcs_handler("git", "keywords") +def git_versions_from_keywords(keywords, tag_prefix, verbose): + if not keywords: + raise NotThisMethod("no keywords at all, weird") + refnames = keywords["refnames"].strip() + if refnames.startswith("$Format"): + if verbose: + print("keywords are unexpanded, not using") + raise NotThisMethod("unexpanded keywords, not a git-archive tarball") + refs = set([r.strip() for r in refnames.strip("()").split(",")]) + # starting in git-1.8.3, tags are listed as "tag: foo-1.0" instead of + # just "foo-1.0". If we see a "tag: " prefix, prefer those. + TAG = "tag: " + tags = set([r[len(TAG):] for r in refs if r.startswith(TAG)]) + if not tags: + # Either we're using git < 1.8.3, or there really are no tags. We use + # a heuristic: assume all version tags have a digit. The old git %d + # expansion behaves like git log --decorate=short and strips out the + # refs/heads/ and refs/tags/ prefixes that would let us distinguish + # between branches and tags. By ignoring refnames without digits, we + # filter out many common branch names like "release" and + # "stabilization", as well as "HEAD" and "master". + tags = set([r for r in refs if re.search(r'\d', r)]) + if verbose: + print("discarding '%s', no digits" % ",".join(refs-tags)) + if verbose: + print("likely tags: %s" % ",".join(sorted(tags))) + for ref in sorted(tags): + # sorting will prefer e.g. "2.0" over "2.0rc1" + if ref.startswith(tag_prefix): + r = ref[len(tag_prefix):] + if verbose: + print("picking %s" % r) + return {"version": r, + "full-revisionid": keywords["full"].strip(), + "dirty": False, "error": None + } + # no suitable tags, so version is "0+unknown", but full hex is still there + if verbose: + print("no suitable tags, using unknown + full revision id") + return {"version": "0+unknown", + "full-revisionid": keywords["full"].strip(), + "dirty": False, "error": "no suitable tags"} + + +@register_vcs_handler("git", "pieces_from_vcs") +def git_pieces_from_vcs(tag_prefix, root, verbose, run_command=run_command): + # this runs 'git' from the root of the source tree. This only gets called + # if the git-archive 'subst' keywords were *not* expanded, and + # _version.py hasn't already been rewritten with a short version string, + # meaning we're inside a checked out source tree. + + if not os.path.exists(os.path.join(root, ".git")): + if verbose: + print("no .git in %s" % root) + raise NotThisMethod("no .git directory") + + GITS = ["git"] + if sys.platform == "win32": + GITS = ["git.cmd", "git.exe"] + # if there is a tag, this yields TAG-NUM-gHEX[-dirty] + # if there are no tags, this yields HEX[-dirty] (no NUM) + describe_out = run_command(GITS, ["describe", "--tags", "--dirty", + "--always", "--long"], + cwd=root) + # --long was added in git-1.5.5 + if describe_out is None: + raise NotThisMethod("'git describe' failed") + describe_out = describe_out.strip() + full_out = run_command(GITS, ["rev-parse", "HEAD"], cwd=root) + if full_out is None: + raise NotThisMethod("'git rev-parse' failed") + full_out = full_out.strip() + + pieces = {} + pieces["long"] = full_out + pieces["short"] = full_out[:7] # maybe improved later + pieces["error"] = None + + # parse describe_out. It will be like TAG-NUM-gHEX[-dirty] or HEX[-dirty] + # TAG might have hyphens. + git_describe = describe_out + + # look for -dirty suffix + dirty = git_describe.endswith("-dirty") + pieces["dirty"] = dirty + if dirty: + git_describe = git_describe[:git_describe.rindex("-dirty")] + + # now we have TAG-NUM-gHEX or HEX + + if "-" in git_describe: + # TAG-NUM-gHEX + mo = re.search(r'^(.+)-(\d+)-g([0-9a-f]+)$', git_describe) + if not mo: + # unparseable. Maybe git-describe is misbehaving? + pieces["error"] = ("unable to parse git-describe output: '%s'" + % describe_out) + return pieces + + # tag + full_tag = mo.group(1) + if not full_tag.startswith(tag_prefix): + if verbose: + fmt = "tag '%s' doesn't start with prefix '%s'" + print(fmt % (full_tag, tag_prefix)) + pieces["error"] = ("tag '%s' doesn't start with prefix '%s'" + % (full_tag, tag_prefix)) + return pieces + pieces["closest-tag"] = full_tag[len(tag_prefix):] + + # distance: number of commits since tag + pieces["distance"] = int(mo.group(2)) + + # commit: short hex revision ID + pieces["short"] = mo.group(3) + + else: + # HEX: no tags + pieces["closest-tag"] = None + count_out = run_command(GITS, ["rev-list", "HEAD", "--count"], + cwd=root) + pieces["distance"] = int(count_out) # total number of commits + + return pieces + + +def do_vcs_install(manifest_in, versionfile_source, ipy): + GITS = ["git"] + if sys.platform == "win32": + GITS = ["git.cmd", "git.exe"] + files = [manifest_in, versionfile_source] + if ipy: + files.append(ipy) + try: + me = __file__ + if me.endswith(".pyc") or me.endswith(".pyo"): + me = os.path.splitext(me)[0] + ".py" + versioneer_file = os.path.relpath(me) + except NameError: + versioneer_file = "versioneer.py" + files.append(versioneer_file) + present = False + try: + f = open(".gitattributes", "r") + for line in f.readlines(): + if line.strip().startswith(versionfile_source): + if "export-subst" in line.strip().split()[1:]: + present = True + f.close() + except EnvironmentError: + pass + if not present: + f = open(".gitattributes", "a+") + f.write("%s export-subst\n" % versionfile_source) + f.close() + files.append(".gitattributes") + run_command(GITS, ["add", "--"] + files) + + +def versions_from_parentdir(parentdir_prefix, root, verbose): + # Source tarballs conventionally unpack into a directory that includes + # both the project name and a version string. + dirname = os.path.basename(root) + if not dirname.startswith(parentdir_prefix): + if verbose: + print("guessing rootdir is '%s', but '%s' doesn't start with " + "prefix '%s'" % (root, dirname, parentdir_prefix)) + raise NotThisMethod("rootdir doesn't start with parentdir_prefix") + return {"version": dirname[len(parentdir_prefix):], + "full-revisionid": None, + "dirty": False, "error": None} + +SHORT_VERSION_PY = """ +# This file was generated by 'versioneer.py' (0.15) from +# revision-control system data, or from the parent directory name of an +# unpacked source archive. Distribution tarballs contain a pre-generated copy +# of this file. + +import json +import sys + +version_json = ''' +%s +''' # END VERSION_JSON + + +def get_versions(): + return json.loads(version_json) +""" + + +def versions_from_file(filename): + try: + with open(filename) as f: + contents = f.read() + except EnvironmentError: + raise NotThisMethod("unable to read _version.py") + mo = re.search(r"version_json = '''\n(.*)''' # END VERSION_JSON", + contents, re.M | re.S) + if not mo: + raise NotThisMethod("no version_json in _version.py") + return json.loads(mo.group(1)) + + +def write_to_version_file(filename, versions): + os.unlink(filename) + contents = json.dumps(versions, sort_keys=True, + indent=1, separators=(",", ": ")) + with open(filename, "w") as f: + f.write(SHORT_VERSION_PY % contents) + + print("set %s to '%s'" % (filename, versions["version"])) + + +def plus_or_dot(pieces): + if "+" in pieces.get("closest-tag", ""): + return "." + return "+" + + +def render_pep440(pieces): + # now build up version string, with post-release "local version + # identifier". Our goal: TAG[+DISTANCE.gHEX[.dirty]] . Note that if you + # get a tagged build and then dirty it, you'll get TAG+0.gHEX.dirty + + # exceptions: + # 1: no tags. git_describe was just HEX. 0+untagged.DISTANCE.gHEX[.dirty] + + if pieces["closest-tag"]: + rendered = pieces["closest-tag"] + if pieces["distance"] or pieces["dirty"]: + rendered += plus_or_dot(pieces) + rendered += "%d.g%s" % (pieces["distance"], pieces["short"]) + if pieces["dirty"]: + rendered += ".dirty" + else: + # exception #1 + rendered = "0+untagged.%d.g%s" % (pieces["distance"], + pieces["short"]) + if pieces["dirty"]: + rendered += ".dirty" + return rendered + + +def render_pep440_pre(pieces): + # TAG[.post.devDISTANCE] . No -dirty + + # exceptions: + # 1: no tags. 0.post.devDISTANCE + + if pieces["closest-tag"]: + rendered = pieces["closest-tag"] + if pieces["distance"]: + rendered += ".post.dev%d" % pieces["distance"] + else: + # exception #1 + rendered = "0.post.dev%d" % pieces["distance"] + return rendered + + +def render_pep440_post(pieces): + # TAG[.postDISTANCE[.dev0]+gHEX] . The ".dev0" means dirty. Note that + # .dev0 sorts backwards (a dirty tree will appear "older" than the + # corresponding clean one), but you shouldn't be releasing software with + # -dirty anyways. + + # exceptions: + # 1: no tags. 0.postDISTANCE[.dev0] + + if pieces["closest-tag"]: + rendered = pieces["closest-tag"] + if pieces["distance"] or pieces["dirty"]: + rendered += ".post%d" % pieces["distance"] + if pieces["dirty"]: + rendered += ".dev0" + rendered += plus_or_dot(pieces) + rendered += "g%s" % pieces["short"] + else: + # exception #1 + rendered = "0.post%d" % pieces["distance"] + if pieces["dirty"]: + rendered += ".dev0" + rendered += "+g%s" % pieces["short"] + return rendered + + +def render_pep440_old(pieces): + # TAG[.postDISTANCE[.dev0]] . The ".dev0" means dirty. + + # exceptions: + # 1: no tags. 0.postDISTANCE[.dev0] + + if pieces["closest-tag"]: + rendered = pieces["closest-tag"] + if pieces["distance"] or pieces["dirty"]: + rendered += ".post%d" % pieces["distance"] + if pieces["dirty"]: + rendered += ".dev0" + else: + # exception #1 + rendered = "0.post%d" % pieces["distance"] + if pieces["dirty"]: + rendered += ".dev0" + return rendered + + +def render_git_describe(pieces): + # TAG[-DISTANCE-gHEX][-dirty], like 'git describe --tags --dirty + # --always' + + # exceptions: + # 1: no tags. HEX[-dirty] (note: no 'g' prefix) + + if pieces["closest-tag"]: + rendered = pieces["closest-tag"] + if pieces["distance"]: + rendered += "-%d-g%s" % (pieces["distance"], pieces["short"]) + else: + # exception #1 + rendered = pieces["short"] + if pieces["dirty"]: + rendered += "-dirty" + return rendered + + +def render_git_describe_long(pieces): + # TAG-DISTANCE-gHEX[-dirty], like 'git describe --tags --dirty + # --always -long'. The distance/hash is unconditional. + + # exceptions: + # 1: no tags. HEX[-dirty] (note: no 'g' prefix) + + if pieces["closest-tag"]: + rendered = pieces["closest-tag"] + rendered += "-%d-g%s" % (pieces["distance"], pieces["short"]) + else: + # exception #1 + rendered = pieces["short"] + if pieces["dirty"]: + rendered += "-dirty" + return rendered + + +def render(pieces, style): + if pieces["error"]: + return {"version": "unknown", + "full-revisionid": pieces.get("long"), + "dirty": None, + "error": pieces["error"]} + + if not style or style == "default": + style = "pep440" # the default + + if style == "pep440": + rendered = render_pep440(pieces) + elif style == "pep440-pre": + rendered = render_pep440_pre(pieces) + elif style == "pep440-post": + rendered = render_pep440_post(pieces) + elif style == "pep440-old": + rendered = render_pep440_old(pieces) + elif style == "git-describe": + rendered = render_git_describe(pieces) + elif style == "git-describe-long": + rendered = render_git_describe_long(pieces) + else: + raise ValueError("unknown style '%s'" % style) + + return {"version": rendered, "full-revisionid": pieces["long"], + "dirty": pieces["dirty"], "error": None} + + +class VersioneerBadRootError(Exception): + pass + + +def get_versions(verbose=False): + # returns dict with two keys: 'version' and 'full' + + if "versioneer" in sys.modules: + # see the discussion in cmdclass.py:get_cmdclass() + del sys.modules["versioneer"] + + root = get_root() + cfg = get_config_from_root(root) + + assert cfg.VCS is not None, "please set [versioneer]VCS= in setup.cfg" + handlers = HANDLERS.get(cfg.VCS) + assert handlers, "unrecognized VCS '%s'" % cfg.VCS + verbose = verbose or cfg.verbose + assert cfg.versionfile_source is not None, \ + "please set versioneer.versionfile_source" + assert cfg.tag_prefix is not None, "please set versioneer.tag_prefix" + + versionfile_abs = os.path.join(root, cfg.versionfile_source) + + # extract version from first of: _version.py, VCS command (e.g. 'git + # describe'), parentdir. This is meant to work for developers using a + # source checkout, for users of a tarball created by 'setup.py sdist', + # and for users of a tarball/zipball created by 'git archive' or github's + # download-from-tag feature or the equivalent in other VCSes. + + get_keywords_f = handlers.get("get_keywords") + from_keywords_f = handlers.get("keywords") + if get_keywords_f and from_keywords_f: + try: + keywords = get_keywords_f(versionfile_abs) + ver = from_keywords_f(keywords, cfg.tag_prefix, verbose) + if verbose: + print("got version from expanded keyword %s" % ver) + return ver + except NotThisMethod: + pass + + try: + ver = versions_from_file(versionfile_abs) + if verbose: + print("got version from file %s %s" % (versionfile_abs, ver)) + return ver + except NotThisMethod: + pass + + from_vcs_f = handlers.get("pieces_from_vcs") + if from_vcs_f: + try: + pieces = from_vcs_f(cfg.tag_prefix, root, verbose) + ver = render(pieces, cfg.style) + if verbose: + print("got version from VCS %s" % ver) + return ver + except NotThisMethod: + pass + + try: + if cfg.parentdir_prefix: + ver = versions_from_parentdir(cfg.parentdir_prefix, root, verbose) + if verbose: + print("got version from parentdir %s" % ver) + return ver + except NotThisMethod: + pass + + if verbose: + print("unable to compute version") + + return {"version": "0+unknown", "full-revisionid": None, + "dirty": None, "error": "unable to compute version"} + + +def get_version(): + return get_versions()["version"] + + +def get_cmdclass(): + if "versioneer" in sys.modules: + del sys.modules["versioneer"] + # this fixes the "python setup.py develop" case (also 'install' and + # 'easy_install .'), in which subdependencies of the main project are + # built (using setup.py bdist_egg) in the same python process. Assume + # a main project A and a dependency B, which use different versions + # of Versioneer. A's setup.py imports A's Versioneer, leaving it in + # sys.modules by the time B's setup.py is executed, causing B to run + # with the wrong versioneer. Setuptools wraps the sub-dep builds in a + # sandbox that restores sys.modules to it's pre-build state, so the + # parent is protected against the child's "import versioneer". By + # removing ourselves from sys.modules here, before the child build + # happens, we protect the child from the parent's versioneer too. + # Also see https://github.com/warner/python-versioneer/issues/52 + + cmds = {} + + # we add "version" to both distutils and setuptools + from distutils.core import Command + + class cmd_version(Command): + description = "report generated version string" + user_options = [] + boolean_options = [] + + def initialize_options(self): + pass + + def finalize_options(self): + pass + + def run(self): + vers = get_versions(verbose=True) + print("Version: %s" % vers["version"]) + print(" full-revisionid: %s" % vers.get("full-revisionid")) + print(" dirty: %s" % vers.get("dirty")) + if vers["error"]: + print(" error: %s" % vers["error"]) + cmds["version"] = cmd_version + + # we override "build_py" in both distutils and setuptools + # + # most invocation pathways end up running build_py: + # distutils/build -> build_py + # distutils/install -> distutils/build ->.. + # setuptools/bdist_wheel -> distutils/install ->.. + # setuptools/bdist_egg -> distutils/install_lib -> build_py + # setuptools/install -> bdist_egg ->.. + # setuptools/develop -> ? + + from distutils.command.build_py import build_py as _build_py + + class cmd_build_py(_build_py): + def run(self): + root = get_root() + cfg = get_config_from_root(root) + versions = get_versions() + _build_py.run(self) + # now locate _version.py in the new build/ directory and replace + # it with an updated value + if cfg.versionfile_build: + target_versionfile = os.path.join(self.build_lib, + cfg.versionfile_build) + print("UPDATING %s" % target_versionfile) + write_to_version_file(target_versionfile, versions) + cmds["build_py"] = cmd_build_py + + if "cx_Freeze" in sys.modules: # cx_freeze enabled? + from cx_Freeze.dist import build_exe as _build_exe + + class cmd_build_exe(_build_exe): + def run(self): + root = get_root() + cfg = get_config_from_root(root) + versions = get_versions() + target_versionfile = cfg.versionfile_source + print("UPDATING %s" % target_versionfile) + write_to_version_file(target_versionfile, versions) + + _build_exe.run(self) + os.unlink(target_versionfile) + with open(cfg.versionfile_source, "w") as f: + LONG = LONG_VERSION_PY[cfg.VCS] + f.write(LONG % + {"DOLLAR": "$", + "STYLE": cfg.style, + "TAG_PREFIX": cfg.tag_prefix, + "PARENTDIR_PREFIX": cfg.parentdir_prefix, + "VERSIONFILE_SOURCE": cfg.versionfile_source, + }) + cmds["build_exe"] = cmd_build_exe + del cmds["build_py"] + + # we override different "sdist" commands for both environments + if "setuptools" in sys.modules: + from setuptools.command.sdist import sdist as _sdist + else: + from distutils.command.sdist import sdist as _sdist + + class cmd_sdist(_sdist): + def run(self): + versions = get_versions() + self._versioneer_generated_versions = versions + # unless we update this, the command will keep using the old + # version + self.distribution.metadata.version = versions["version"] + return _sdist.run(self) + + def make_release_tree(self, base_dir, files): + root = get_root() + cfg = get_config_from_root(root) + _sdist.make_release_tree(self, base_dir, files) + # now locate _version.py in the new base_dir directory + # (remembering that it may be a hardlink) and replace it with an + # updated value + target_versionfile = os.path.join(base_dir, cfg.versionfile_source) + print("UPDATING %s" % target_versionfile) + write_to_version_file(target_versionfile, + self._versioneer_generated_versions) + cmds["sdist"] = cmd_sdist + + return cmds + + +CONFIG_ERROR = """ +setup.cfg is missing the necessary Versioneer configuration. You need +a section like: + + [versioneer] + VCS = git + style = pep440 + versionfile_source = src/myproject/_version.py + versionfile_build = myproject/_version.py + tag_prefix = "" + parentdir_prefix = myproject- + +You will also need to edit your setup.py to use the results: + + import versioneer + setup(version=versioneer.get_version(), + cmdclass=versioneer.get_cmdclass(), ...) + +Please read the docstring in ./versioneer.py for configuration instructions, +edit setup.cfg, and re-run the installer or 'python versioneer.py setup'. +""" + +SAMPLE_CONFIG = """ +# See the docstring in versioneer.py for instructions. Note that you must +# re-run 'versioneer.py setup' after changing this section, and commit the +# resulting files. + +[versioneer] +#VCS = git +#style = pep440 +#versionfile_source = +#versionfile_build = +#tag_prefix = +#parentdir_prefix = + +""" + +INIT_PY_SNIPPET = """ +from ._version import get_versions +__version__ = get_versions()['version'] +del get_versions +""" + + +def do_setup(): + root = get_root() + try: + cfg = get_config_from_root(root) + except (EnvironmentError, configparser.NoSectionError, + configparser.NoOptionError) as e: + if isinstance(e, (EnvironmentError, configparser.NoSectionError)): + print("Adding sample versioneer config to setup.cfg", + file=sys.stderr) + with open(os.path.join(root, "setup.cfg"), "a") as f: + f.write(SAMPLE_CONFIG) + print(CONFIG_ERROR, file=sys.stderr) + return 1 + + print(" creating %s" % cfg.versionfile_source) + with open(cfg.versionfile_source, "w") as f: + LONG = LONG_VERSION_PY[cfg.VCS] + f.write(LONG % {"DOLLAR": "$", + "STYLE": cfg.style, + "TAG_PREFIX": cfg.tag_prefix, + "PARENTDIR_PREFIX": cfg.parentdir_prefix, + "VERSIONFILE_SOURCE": cfg.versionfile_source, + }) + + ipy = os.path.join(os.path.dirname(cfg.versionfile_source), + "__init__.py") + if os.path.exists(ipy): + try: + with open(ipy, "r") as f: + old = f.read() + except EnvironmentError: + old = "" + if INIT_PY_SNIPPET not in old: + print(" appending to %s" % ipy) + with open(ipy, "a") as f: + f.write(INIT_PY_SNIPPET) + else: + print(" %s unmodified" % ipy) + else: + print(" %s doesn't exist, ok" % ipy) + ipy = None + + # Make sure both the top-level "versioneer.py" and versionfile_source + # (PKG/_version.py, used by runtime code) are in MANIFEST.in, so + # they'll be copied into source distributions. Pip won't be able to + # install the package without this. + manifest_in = os.path.join(root, "MANIFEST.in") + simple_includes = set() + try: + with open(manifest_in, "r") as f: + for line in f: + if line.startswith("include "): + for include in line.split()[1:]: + simple_includes.add(include) + except EnvironmentError: + pass + # That doesn't cover everything MANIFEST.in can do + # (http://docs.python.org/2/distutils/sourcedist.html#commands), so + # it might give some false negatives. Appending redundant 'include' + # lines is safe, though. + if "versioneer.py" not in simple_includes: + print(" appending 'versioneer.py' to MANIFEST.in") + with open(manifest_in, "a") as f: + f.write("include versioneer.py\n") + else: + print(" 'versioneer.py' already in MANIFEST.in") + if cfg.versionfile_source not in simple_includes: + print(" appending versionfile_source ('%s') to MANIFEST.in" % + cfg.versionfile_source) + with open(manifest_in, "a") as f: + f.write("include %s\n" % cfg.versionfile_source) + else: + print(" versionfile_source already in MANIFEST.in") + + # Make VCS-specific changes. For git, this means creating/changing + # .gitattributes to mark _version.py for export-time keyword + # substitution. + do_vcs_install(manifest_in, cfg.versionfile_source, ipy) + return 0 + + +def scan_setup_py(): + found = set() + setters = False + errors = 0 + with open("setup.py", "r") as f: + for line in f.readlines(): + if "import versioneer" in line: + found.add("import") + if "versioneer.get_cmdclass()" in line: + found.add("cmdclass") + if "versioneer.get_version()" in line: + found.add("get_version") + if "versioneer.VCS" in line: + setters = True + if "versioneer.versionfile_source" in line: + setters = True + if len(found) != 3: + print("") + print("Your setup.py appears to be missing some important items") + print("(but I might be wrong). Please make sure it has something") + print("roughly like the following:") + print("") + print(" import versioneer") + print(" setup( version=versioneer.get_version(),") + print(" cmdclass=versioneer.get_cmdclass(), ...)") + print("") + errors += 1 + if setters: + print("You should remove lines like 'versioneer.VCS = ' and") + print("'versioneer.versionfile_source = ' . This configuration") + print("now lives in setup.cfg, and should be removed from setup.py") + print("") + errors += 1 + return errors + +if __name__ == "__main__": + cmd = sys.argv[1] + if cmd == "setup": + errors = do_setup() + errors += scan_setup_py() + if errors: + sys.exit(1)