Change Log

settings.yaml updated to firmware v1.3.9. #697
Change mac installer name to _macos and add text note in .dmg for com… #696
console.py: Update title for console and select interface #695
Add changelog and console REAME.txt #694
allowed firmware upgrade via local file, added time to serial upgrade warning #693
update sbp version to v2.3.4 #692

v1.3.5 (2017-12-16)

Full Changelog

Merged pull requests:

Allow firmware upgrade over SBP by default. #688

v1.3.4 (2017-12-14)

Full Changelog

Merged pull requests:

build el cap #690
baseline_view: show heading always #687
Only open a file driver on OSX #684

v1.3.3 (2017-12-08)

Full Changelog

Merged pull requests:

Changes to get a release candidate ready #683
Move some settings to expert #681

v1.3.2 (2017-12-05)

Full Changelog

Merged pull requests:

remove travis pypi deploy #680
Mark the NTRIP debug setting as an "expert" value #679

v1.3.dev (2017-12-02)

Full Changelog

v1.3.0-test (2017-12-02)

Full Changelog

v1.3_devtestest (2017-12-02)

Full Changelog

v1.3.1 (2017-11-29)

Full Changelog

Merged pull requests:

Skip deployment cleanup #676

v1.3.0 (2017-11-29)

Full Changelog

Merged pull requests:

Update default values #675
updated sbp requirement #674
update_view: prevent message about fw upgrade success if device SN ch… #672
Fix bug in MSI script where '$name' was shown to user #671
get actual user when in config script as sudo #669
Added tab for magnetometer measurements #668
New sig support #667
Changelog generator #666

v1.2.3 (2017-10-25)

Full Changelog

Merged pull requests:

handle WindowsError #665

v1.2.2 (2017-10-16)

Full Changelog

Merged pull requests:

Add readonly field for every parameter #662
sbp_relay_view: remove running boolean from display #661
Refresh click #660
console.py:PortChooser: config enter for ok button #659

v1.2.1 (2017-10-10)

Full Changelog

Merged pull requests:

Settings confirmation fix #658
Settings yaml update rtcmv3 #657
Fix formatting of RST code blocks, purge empty section #654
Make ext_events_1 and ext_events_2 expert settings #653

v1.2.0 (2017-09-26)

Full Changelog

Closed issues:

CSV header tow says msec but actually sec #629

Merged pull requests:

serial_link: re-add osx fix to use file rather than CDC driver over usb #652
Update settings.yaml #651

v1.2.0rc3 (2017-09-16)

Full Changelog

Merged pull requests:

Settings v1.2 #650
Rename gpgsa_msg_rate to gsa_msg_rate #649
OSX installation fixes #648
update readme #647
Correct default values in Piksi console #646
settings_view.py: Change revert timeout from 1 second to 5 second #645
clean up plot_square_axes #644
Make window narrower #643
observation_view: restore total obs count #642
improve console entry point and resource access #641

v1.2.0.rc2 (2017-08-30)

Full Changelog

v1.2.0rc2 (2017-08-30)

Full Changelog

Closed issues:

Observation signal code 5 (GPS L1P) crashes the console #635

Merged pull requests:

tracking view improvements #640
Remove python console from view #639
Dynamically refresh serial port list, choose first by default #638
obs_view: better handling of 'unsupported' codes #637
Tow csv log header #634

v1.2.0rc1 (2017-08-29)

Full Changelog

Closed issues:

console shows PRN+1 instead of PRN #615
rinex converter support in console #395
Bar chart for tracking view #305

Merged pull requests:

fix windows build #632
Windows xp pyserial version and cleanup #631
imporove packaging situation #628
force bundle missing libs on linux #627
fix appveyor build with dev version of enable #626
Add separate settings for enabling GLO in SPP and RTK filters. #625
fixed msg parameter for ip status #623
tracking view and performance improvements #622
Multiple external events for Duro #621
Add GLONASS configuration parameters in the console #620
fix travis osx build #619
update sbp, yaml #618
Remove kiwisolver, update deps #614
appveyor: makensis #613
remove RELEASE-VERSION from console.spec #612
linting #611
Specan master #606

v1.1.12 (2017-06-23)

Full Changelog

Merged pull requests:

update sbp to 2.2.6 #605
use setuptools_scm instead of version.py #603
travis improvements #602
bootstrap changes #600
Appveyor + CI enhancements #599
Mavlink decode v2 #598
obs view: shorten labels #597
Osx bootstrap #596
add support for old and new tracking msg #593
Add new dataset to travis #592
update sbp to 2.2.3 #591
Fix unset fw download path [release] #586
Fix unset fw download path [master] #585
Add GLO support into Trk and Obs views #583

v1.1.G (2017-05-16)

Full Changelog

Merged pull requests:

V1.1.G release notes #582
Change git command to not have xcode pop-up in OSX [master] #581
Change git command to not have xcode pop-up in OSX #580

v1.1.F (2017-05-12)

Full Changelog

Merged pull requests:

Update sbp to 2.2.1 #579
Update sbp to 2.2.1 #578

v1.1.E (2017-05-12)

Full Changelog

Merged pull requests:

Networking hide by default release #577
Sbp_relay_view: remove skylark labels, rename variables, remove visib… #576
Observation_view: Double buffer so that we don't update view inbetween packets #575
Observation_view: Double buffer so that we don't update view inbetween packets #574
Settings.yml: Remove RTCM 1001, 1003, and 1007 from list of supported… #573
Settings.yml: Remove RTCM 1001, 1003, and 1007 from list of supported… #572
settings_view: ensure same dictionary to play nice with update_view. #571
settings_view: ensure same dictionary to play nice with update_view. #570
Traceback forget import rel #569
Traceback forget import master #568
settings_view: fix blinky settings view with two interfaces connected: #567
settings_view: fix blinky settings view with two interfaces connected: #566

v1.1.D (2017-05-02)

Full Changelog

Merged pull requests:

Reduce height and baseline distance precision to mm's #565
Reduce height and baseline distance precision to mm's #564
Remove print on receipt of any old settings read response #563
Add skylark whitelist to minimize up traffic #562
Add skylark whitelist to minimize up traffic #561
Remove print on receipt of any old settings read response #560
settings.yaml: remove 'path:' from notes which was interpreted as a map #559
settings.yaml: remove 'path:' from first line of setting note #558
Settings docs 1.1 master #557
Settings docs v1.1 #556
Settings for ntrip and skylark clients. #555
Client Settings #554

v1.1.C (2017-04-26)

Full Changelog

Closed issues:

ImportError: No module named gui_utils #525

Merged pull requests:

add 230400 choice for baud #553
add 230400 choice for baud #552
removed inactive uart info and replaced with network status. #551
Settings_view: Update warning when setting could not be set; prevent … #550
Settings_view: Update warning when setting could not be set; prevent … #549
Periodic update release #548
Periodic update #547
removed inactive uart info and replaced with network status. #546
Fix heading offset descriptor to specify we add the offset value, not… #544

v1.1.B (2017-04-14)

Full Changelog

Closed issues:

Old SPP / Float RTK points remain in Piksi Control display #524

Merged pull requests:

Fix heading offset descriptor to specify we subtract the offset value… #542
Check for IOError during download #541
Check for IOError during download #540
Settings v1.1 release #539
Settings v1.1 #538
Osx bootstrap #536
setup.sh: brew swig #535
Sbp log zipper #530

v1.1.A (2017-04-11)

Full Changelog

v1.1.0-branch (2017-04-03)

Full Changelog

Closed issues:

CSV logs are not created when there is no GPS week from receiver #500
Make one paragraph UA plan for new 1.1 features #488
Incorrect flags values in CSV log #485
Remove Reset IAR and Init with known baseline buttons #484
Download Latest Firmware saves file in \Program Files folder on Windows #483
ZeroDivisionError: float division by zero #482

Merged pull requests:

Add heading offset setting to settings.yaml #534
solution and baseline view: Fix lingering solutions per #524 #533
fixup UTC time source, add baseline heading #532
V2.2.0 sbp #531
Add Age Corrections and UTC Time msg, rename accuracy fields, reorder… #528
Initialize accel and gyro arrays which show bogus data on Windows upo… #527
Adding Klobuchar correction disabler in settings #526
Cacert finally #523
Imu view periodic #522
console.py: fix misunderstood thread.timer, add cmd_resp callback pri… #521
Add Gui Utils Module #520
define basedir for finding image resources #519
Gui utils #518
Hdw flow ctrl #517
Update sbp to 2.1.8 #516
CSV recording improvements: add local time, reduce duplicated code, d… #515
console.py Fix certificate paths when outside of Pyinstaller bundle. #514
Make small usability enhancements to PortChooser and fix cast bug #513
update_view: fix undefined local_stm version with -u #512
Add linebreak to usage, remove global variables about usage #511
Add setting for external event sensitivity. #510
add TCP/IP to console pop-up #508
Connection icon color #507
Package Certs in Pyinstaller Binary #506
Change default firmware download directory to ~/home/SwiftNav #505
Add PPS settings for polarity, offset and period. #504
fix import argparse in serial-link.py #502
Print console version for console log #499
Fix windows uninstaller so it actually removes the program #498
Readme popup fix #496
make sure to close HTTPDriver no matter what when reconnecting #495
Add erase_l2c_capb to settings.yaml #494
Pop up useage #492
Add ability to generate readme of the console usage and include in pa… #491
Removed IAR reset and Init Known Baseline buttons #489
Fix incompatiblity warning #487
solution and settings: fix auto survey for no fix message #486
update_view: fix version comparison #481
Skylark catch exceptions #467

1.0.A (2017-02-09)

Full Changelog

Merged pull requests:

update_view: fix version comparison #480
Rename console installers for clarity and brevity #478
Rename console installers for clarity and brevity #477
DZ: Respond to settings docs feedback #475

v1.0.11 (2017-02-09)

Full Changelog

Merged pull requests:

settings.yaml: respond to feedback and cleanup #476
Settings.yaml : doc updated for release. #474
Change pyparsing version which was broken on OSX #473
Settings.yaml : doc updated for master. #472
Update SBP and move to file handles #471
Change pyparsing version which was broken on OSX #470

v0.30.9 (2017-02-07)

Full Changelog

Merged pull requests:

Remove Deprecation Warning #469

v1.0.10 (2017-02-06)

Full Changelog

v1.0.9 (2017-02-06)

Full Changelog

v1.0.8 (2017-01-30)

Full Changelog

v1.0.7 (2017-01-27)

Full Changelog

Closed issues:

Put units on tracking tab x axis #324

Merged pull requests:

sbp_relay_view: syntax error #465
sbp_relay_view: syntax error #464
update requirements for sbp 2.1.6 #463
update requirements for sbp 2.1.6 #462

v1.0.6 (2017-01-26)

Full Changelog

Merged pull requests:

Skylark debug master #461
Improve tar filename and path #460
Improve tar filename and path #459
Skylark debug #458
Update view: initialize update_dl always #457
Update view: initialize update_dl always #456
Updates for new msg types and PRN counting #455

v1.0.5 (2017-01-23)

Full Changelog

Merged pull requests:

Settings View: fix bug in selected setting #454
Settings View: fix bug in selected setting #453
settings: add first cut at docstrings #450
settings: add first cut at docstrings #449

v1.0.4 (2017-01-20)

Full Changelog

Merged pull requests:

Tracking_view: limit xrange to 100 seconds #452
Tracking_view: limit xrange to 100 seconds #451
USB upgrade UI improvements (release) #448
USB upgrade UI improvements (master) #447
fix bug in settings view when nothing selected #446
fix bug in settings view when nothing selected #445

v1.0.3 (2017-01-19)

Full Changelog

v1.0.2 (2017-01-17)

Full Changelog

Closed issues:

Final version of Piksi v2 console and warning pop-ups #393
Release v0.30 console #340
Respond to failed tests on Console for v0.30 release #339
Test v0.30 console #338
Software update pop-up displays incorrect link #335
Limit the time on the baseline and solution tab to 3 decimal digits. #325
Add try catch statement in so that the console still works without write permissions for the csv files #295
fix up rinex recording in console for observation type 0x49 #293
Fix time resolution in CSV files #282
console from .dmg asks to install GIT #245

Merged pull requests:

Fix default UUID #444
update_view: Catch URLError #443
update_view: Catch URLError #442
Fix default UUID #440
Allow calling settings read callbacks multiple times (release PR) #439
Allow calling settings read callbacks multiple times (master PR) #438
Update view suppress warning (release branch PR) #437
Update view fixes release #436

v1.0.1 (2017-01-13)

Full Changelog

Merged pull requests:

update_view: don't use nap for nagware check either #435
update_view: don't look for nap version keys #431

v1.0.0 (2017-01-12)

Full Changelog

v1.0.0-branch (2017-01-11)

Full Changelog

v0.32-rc2 (2017-01-11)

Full Changelog

Merged pull requests:

Update firmware upgrade text #430
Add a pip list to .travis.yaml for documentation, install after build #429
Fix no list baudrate and port #428
setup.sh: Robustly install python #427
Skylark uuid #426
Different versions of PyInstaller for linux and osx #425
Swift console rename #424

v0.30.8 (2017-01-09)

Full Changelog

v0.32-rc1 (2017-01-07)

Full Changelog

Closed issues:

Add command line arguments for rover,base and connections to skylark #394

Merged pull requests:

v0.33 fixes #423
Skylark cmdline #422
Add tar make target #421
Osx qt 4.8.5 #420
Udev rules #419
WIP: serial_link.py: Use CDC driver #415
update_view improvements and hiding of feature #413
V0.33 fix 5 #404

v0.31.3 (2017-01-04)

Full Changelog

v0.30.7 (2017-01-03)

Full Changelog

Closed issues:

Unexpected tracking channel legend behavior in console #403
commandl line upgrade unhandled failure case #391

Merged pull requests:

console.py: fix misunderstood thread.timer, add cmd_resp callback pri… #417
Fix uuid test for negative serial numbers #416
rename console event log #414
only put legend entries for currently tracked items #412
tracking_view: fix dict iteration that wasn't thread safe #411
Update install docs #409
Elevation mask settings #408
Cdc osx fix #407
Fixes for firmware update on Windows #406
fix serial-link negative serial number problem #405
V0.33 fix 3 #402
Piksi console -> Swift console rename #401
initialize response dict #392

v0.30.5 (2016-12-16)

Full Changelog

Merged pull requests:

Use the new MsgReset from libsbp. #400
bug_fixes #399

v0.30.3 (2016-12-15)

Full Changelog

Merged pull requests:

Add hardware incompatibility warning for Piksi v2 #398

v0.30.4 (2016-12-15)

Full Changelog

v0.30.2 (2016-12-15)

Full Changelog

v0.30.1 (2016-12-15)

Full Changelog

Closed issues:

Observation tab showing old observations #383
Fix tracking view for SBP 2.x #379

Merged pull requests:

V0.33 improvements #397
Update to latest libsbp (for raw IMU support) #396
Fix directory typo in .travis.yaml #390
Console based firmware update for Piksi Multi #389
add linux packaging to makefile #388
Add_os postfix for console ci build results #387
Remove old observations from the table #386
IMU raw data support #385
fix tracking_view in simulation mode and future proof #382
remove old solution's latest cross point #381
tracking.py: add filters for L1 vs L2 tracking #378

v0.31.2 (2016-12-08)

Full Changelog

Closed issues:

implement sbp 2.0 changes #362
new bootload script for V3 #357
Solution tab should integrate SPP and RTK solutions #354
L2P observation do not show correctly #353
Observation view fixes: #327
Have the Position center button be applied after the zoom all button. #326

Merged pull requests:

Add MSG_OBS to skylark whitelist #380
console.py tweeks: cmd line arg for console log, use EMPTY_STR macro … #377
Improve ObservationView handling of SBP 2.x #376
Bootload Piksi v3 #370

v0.31.1 (2016-12-01)

Full Changelog

Merged pull requests:

fix toolbar num_sats #375

v0.31 (2016-12-01)

Full Changelog

Closed issues:

Toggle something on the display with each heartbeat #342

Merged pull requests:

remove debug #374
Obs v2.0 #373
Sbp 2.0 vel dops time #372
Sbp 2.0 new msg #371
Text fmt #369
Sbp2.0 #366
Pick up new SBP 2.0 #365
remove osx versions that seem to fail on Travis #364
Make settings erase work for V2 and V3. #363
Change from 'SATS' to 'Signals' #361
increase travis_wait #360

v0.30-rc2 (2016-11-02)

Full Changelog

Merged pull requests:

V30 rc2 #359
Cnx icon blink #347

v0.30-rc1 (2016-11-01)

Full Changelog

Closed issues:

Set default baudrate to 115200 in console and else where in the tools #352
Verify that UART status message display works with V0.21 and piksi_firmware_master #328
change labels on observation view from rover and base to local and remote #294
running from dmg #258
Button to start SBP log recording from the console #63

Merged pull requests:

If networking connection breaks, attempt reconnection. #358
Configurable device id's #356
Handle L1P and L2P. Fix bugs in calculating GPS PRN numbers. #355
Configurable base and rover device #351
add gui baudrate toggle #346
New SBP #337
Update console.py #334
Sbp2rinex #292
Creates interpolate_event_positions.py #187

v0.29 (2016-08-10)

Full Changelog

Merged pull requests:

Update solution_view.py #333
V0.28 showstopper fixes #330
Windows fixes #317

v0.28 (2016-08-03)

Full Changelog

v0.28-rc2 (2016-08-03)

Full Changelog

Closed issues:

make the CSV logging respect the -o arguement if it is a directory #291
Remove -e option #285
Add status bar #278
make sure CSV files end up in the location from -o command #261
Add button to enable/disable CSV logging #150
Put an annotation in the "RTK Position" tab of the console indicating what settings are required for the tab to display information. #62
Console does not work well with no write permissions in "program files" on Windows #51
Move console into its own repo? #19
Add mean of dumping Piksi settings to machine readable format. #11

Merged pull requests:

fixed that weird flip flop of slashes in windows #316
fixed directory bug for windows #315
don't expect "which" to exist on windows #313
Update solution_view.py #311
changed Rover to Local and Base to Remote #310
Tracking View: Move, Resize, & toggle legend #304
Auto survey 2 #303
Add console status bar; simplify logging infrastructure. #301
Update console.py #300
Staging + Virtual Observations #296
console.py: remove -e cmd line arg #290

v0.27 (2016-06-03)

Full Changelog

Merged pull requests:

Make sure new console works with v0.21 firmware WRT skylark and sbp_r… #288

v0.27-rc1 (2016-06-01)

Full Changelog

Fixed bugs:

Error message for bad device permissions is contradictory #241

Closed issues:

update piksi_tools for latest version of SBP #250
Survey Position Auto Populate #180
typo in help notes for settings: #173
Console: in Solution tab, instruct user to turn on Basestation mode for RTK subtab #135
Console - Change the value of "IAR Num. Hyps." when pending IAR #121
Allow users to choose location of saved logfiles in the console #33

Merged pull requests:

Nsis improvements #287
Rebase axlan windows #286
New obs 2 #283
Add support for L2CM observations #276
Output code of the signal in tracking view legend #271
Updated annotations in settings.yaml #270
CNo theshold #266
Ci exit on error option #264
Added generic AT Commands to console #263
Expert toggle #262
Add option to use TCP host/port. #260
observation_view: show carrier frequency (time diff of carrier phase) #259
check and make sure git actually exists before trying to use it #256
Update branding #255
Requirements work #254
Update sbp #253
Add settings.py to read and write Piksi settings from the terminal #246
Sasha clarify console text #244
move import of piksi_tools.console.utils until after the toolkit was set #243
Uart period #239
Sbp wrapper #236
fix UARTB message mask default value (typo in settings.yaml) #235
Rtk position tab annotated #234
add 'v' character to all displays of local console version #233
only display IAR hypothesis count if it is current and not 1. #232
Correctly adjust PRNs for SBAS. #230
add notes regarding the NMEA message rates #229
Replace reset. #228
remove nargs=1, fix append-log-filename #227
add optional timeout to Diagnostics initializer #221
update simulator generator script for almanac struct changes #212
Add settings for OpenLog #194
added a command line argument to bootload for max queued ops #186

v0.26 (2015-12-07)

Full Changelog

Fixed bugs:

Constrain console python dependencies. #218

Closed issues:

Resolve libsbp serial client freezing in the console #204
Coordinate an onboarding test for HTTP use with console #203
Test console for OS X, Windows release #202
Add HTTP connection tab on the console #201
Reformat update firmware screen, fixup ability to flash STM and NAP separately #105

Merged pull requests:

Better help for HTTP gets. #225
Update console build instructions. #224
Use git tag describe for console command line version. #223
Console updates for HTTP POST. #222

v0.25 (2015-11-24)

Full Changelog

Fixed bugs:

Packaging fixes for console and HOWTO documentation. #214

Merged pull requests:

Icons #217
Requirements adjustments for windows build #215

v0.25-rc0 (2015-11-20)

Full Changelog

Fixed bugs:

All-NaN slice encountered, stack blown #160
Fix tox test for clean install #191
Hotfix handler interface. #157

Closed issues:

A Few Missing Dependencies. #209
Update HTTP base station argument for serial link and console. #152
Tracking CN0 axis should start at 30 #110

Merged pull requests:

Console updates for v0.21 firmware #211
add udp_receive prototype #208
prn vs sid vs sid.sat vs .... ? #207
Change default UartA Baud text in settings #206
make sure return code is 1 when bootload fails due to timeout #197
implement timeout on bootload #196
Modify get_driver to exit with return code upon failure. #195
Add Console settings entry for configurable PPS width. #193
Replace Ansible with simpler bash script. #192
updates to build scripts; move more things into requirements.txt #190
Revert "updates to build scripts; move more things into requirements.… #189
updates to build scripts; move more things into requirements.txt #188
allow user to specify a directory with -o arg #184
Networking updates. #183
add print to diagnostics to warn HITL users of a hard fault or NAP/ST… #177
Piksi tools integration for a networking client. #176
Fix display of thread cpu usage. #175
fix print bug on console for legacy messages #174
Update requirements: specific intelhex version, add numpy #171
Revert "Use new PRN field from signal." #170
Console list tweaks #169
Mavlink analysis #168
Output list fixes #166
SERIAL_LINK: Print log message levels and newlines #165
Bootloader tests #163
Remove software-based watchdog #162
Use new PRN field from signal. #161
Use libsbp message classes instead of struct.unpack. #158
Independent update, update view ui improvements #156
Output list #155
Tracking view rescale #154
Update libsbp interfaces. #151
Mavlink decode and Ardupilot subdirectory #149
Add context support to STMUniqueID for bringup script. #147
console: Square axes when zoom all selected. #142

v0.24.3 (2015-08-06)

Full Changelog

Merged pull requests:

Nullify pip installation garbage. #148
Updates to USRP script. #146
Handle backwards ACQ results. #145
Play scenario from SSD instead of HD. #141
Add units to settings info. #139

v0.24.2 (2015-07-24)

Full Changelog

Closed issues:

Baseline plotting bug #131

Merged pull requests:

V0.24 branch merge back into master #140
baseline: Fix barfing on NaNs when there's no data. #138
Pull out playback parameter. #137

v0.24.1 (2015-07-24)

Full Changelog

Merged pull requests:

Runner for USRP HITL test. #132

v0.24 (2015-07-22)

Full Changelog

Merged pull requests:

fix acq, one of the console issues #134

v0.24-rc2 (2015-07-22)

Full Changelog

v0.14-rc2 (2015-07-22)

Full Changelog

Implemented enhancements:

USRP testing script #133
Console: plot fixed baseline solutions in different color than float #101

Merged pull requests:

fix window sizing issues introduced by reset button #130
New log messages #129
Move to deprecated msg print #128
SETTINGS: Add/change various tracking / solution settings defs #126
Fix satellite masking backwards compatibility #123
add backwards compatibility for MSGTrackStateDepA and update for new … #120
testing: ChibiOS thread support in core dumps. #115
fileio: Use libsbp message defs. #114
CONSOLE: visually distinguish fixed from float baselines #106

v0.24-rc1 (2015-07-13)

Full Changelog

Merged pull requests:

Missed tracking view handling #118
Deprecated -> DepA #116
Bootloader integration tests (rebased) #113

v0.24-rc0 (2015-07-10)

Full Changelog

Closed issues:

Bootload client should repeatedly try to reset the Piksi #39
After flashing firmware, need to update Version strings #27
Remove init known baseline feature from console #24

Merged pull requests:

Support for widened PRN #112
update expert settings for new settings messages #108
fix line breaks on CSV headers #107
CONSOLE: hide expert settings by default #104
CONSOLE: Terminate on Ctrl-C from cmd line #103
NMEA settings information for the console. #102
add action logger (clone of serial link with possibility of talking to device) #97
Update dependency installation instructions in the README #92
update makefile to name windows setup.exe #91
testing: Hack core dumper to work with Python 3. #89
Update to new file_io messages #84
New settings #82

v0.23 (2015-06-26)

Full Changelog

Merged pull requests:

add iq_output_mask to settings.yaml to avoid warning #90
A Docker container for piksi_tools #77

v0.23-rc1 (2015-06-25)

Full Changelog

Merged pull requests:

Improve bootloader, update log output #88

v0.23-rc0 (2015-06-25)

Full Changelog

Closed issues:

Running piksi_tools from source options are confusing #75

Merged pull requests:

More robust diagnostics #87
Script to check firmware/nap settings on test. #85
Update SBP, message renaming #81
serial_link: exit when serial receive thread exits. #80
Use gdb-multiarch for core dump. #76
Add scripts for generation of core dumps. #70

v0.22 (2015-06-19)

Full Changelog

Merged pull requests:

New mavlink bridge #74
Fix message handling #72
Generate settings as JSON file #71
Handler starts the link #67
add -o command line arg #58

v0.21 (2015-06-15)

Full Changelog

Merged pull requests:

update initial variance default values in float KF #64

v0.21-rc0 (2015-06-12)

Full Changelog

v0.20 (2015-06-12)

Full Changelog

v0.19 (2015-06-11)

Full Changelog

v0.18 (2015-06-11)

Full Changelog

Merged pull requests:

Better versioning #60
add reset button to system monitor view #59
Versioned bootloader #57
Move off console's version to piksi_tools version #56

v0.17 (2015-06-08)

Full Changelog

Closed issues:

Build console to work in windows XP #46

Merged pull requests:

Bring versioning back in #55
New sbp with new bootloader messages #52

v0.16.1 (2015-05-16)

Full Changelog

Fixed bugs:

Update wiki to reflect piksi_firmware/scripts move to piksi_tools #40

Closed issues:

Need headers on any CSV /Rinex files generated by console #9

Merged pull requests:

don't clear the settings when you press the read button #50
add headers to csv files auto logged by console #44
Inject tags into logs #43
Bring in setup.sh for piksi_tools #41

v0.16 (2015-05-06)

Full Changelog

Closed issues:

v0.16 release #37

v0.13 (2015-05-06)

Full Changelog

Merged pull requests:

Have print_device_details wait before requesting settings from Piksi. #36
Fire the read_button on the settings view in print_device_details.py #35
Update README.rst #32

v0.12 (2015-04-24)

Full Changelog

Merged pull requests:

Add an append file option to serial_link.py #31
Bring pyinstaller makefile over #30
Support both old and new ephemeris IDs #29

v0.11 (2015-04-17)

Full Changelog

Merged pull requests:

Pickle. It was a thing #25

v0.10 (2015-04-17)

Full Changelog

v0.9 (2015-04-17)

Full Changelog

Implemented enhancements:

Add 'system_monitor.watchdog' setting to enable/disable watchdog timer. #22
Bring in ext_events console support from piksi_firmware #17

Closed issues:

Move the console into piksi_tools.console #10

Merged pull requests:

Support logging JSON and pickle at the same time #23
Add intelhex to requirements, needed by bootload.py #20
Bring over the watchdog #18
Serial cleanup and console relocation #13
add argument to settings view #8
Serial leaning #2

v0.2 (2015-04-01)

* This Change Log was automatically generated by github_changelog_generator

Files

CHANGELOG.md

Latest commit

History

CHANGELOG.md

File metadata and controls

Change Log

v1.5.10 (2018-04-27)

v1.5.9 (2018-04-26)

v1.5.8 (2018-04-25)

v1.5.7 (2018-04-20)

v1.5.6 (2018-04-18)

v1.5.5 (2018-04-13)

v1.5.4 (2018-04-10)

v1.6.dev0 (2018-04-05)

v1.5.3 (2018-04-04)

v1.5.2 (2018-04-02)

v1.5.1 (2018-03-29)

v1.5.0 (2018-03-23)

v1.5.0-branch (2018-03-23)

v1.4.6 (2018-03-20)

v1.4.5 (2018-03-19)

v1.4.4 (2018-03-19)

v1.4.3 (2018-03-09)

v1.4.2 (2018-03-08)

v1.4.1rc1 (2018-02-26)

v1.4.0 (2018-02-03)

v1.4.0-branch (2018-02-03)

v1.3.8 (2017-12-21)

v1.3.7 (2017-12-21)

v1.3.5 (2017-12-16)

v1.3.4 (2017-12-14)

v1.3.3 (2017-12-08)

v1.3.2 (2017-12-05)

v1.3.dev (2017-12-02)

v1.3.0-test (2017-12-02)

v1.3_devtestest (2017-12-02)

v1.3.1 (2017-11-29)

v1.3.0 (2017-11-29)

v1.2.3 (2017-10-25)

v1.2.2 (2017-10-16)

v1.2.1 (2017-10-10)

v1.2.0 (2017-09-26)

v1.2.0rc3 (2017-09-16)

v1.2.0.rc2 (2017-08-30)

v1.2.0rc2 (2017-08-30)

v1.2.0rc1 (2017-08-29)

v1.1.12 (2017-06-23)

v1.1.G (2017-05-16)

v1.1.F (2017-05-12)

v1.1.E (2017-05-12)

v1.1.D (2017-05-02)

v1.1.C (2017-04-26)

v1.1.B (2017-04-14)

v1.1.A (2017-04-11)

v1.1.0-branch (2017-04-03)

1.0.A (2017-02-09)

v1.0.11 (2017-02-09)

v0.30.9 (2017-02-07)

v1.0.10 (2017-02-06)

v1.0.9 (2017-02-06)

v1.0.8 (2017-01-30)

v1.0.7 (2017-01-27)

v1.0.6 (2017-01-26)

v1.0.5 (2017-01-23)

v1.0.4 (2017-01-20)

v1.0.3 (2017-01-19)

v1.0.2 (2017-01-17)

v1.0.1 (2017-01-13)

v1.0.0 (2017-01-12)

v1.0.0-branch (2017-01-11)

v0.32-rc2 (2017-01-11)

v0.30.8 (2017-01-09)

v0.32-rc1 (2017-01-07)

v0.31.3 (2017-01-04)

v0.30.7 (2017-01-03)

v0.30.5 (2016-12-16)

v0.30.3 (2016-12-15)

v0.30.4 (2016-12-15)

v0.30.2 (2016-12-15)