Easee: Falsche Anzeige Leistung

[scharrin2]

Hallo,

seit ein paar Tagen wird mir in der Weboberfläche eine Leistung von 10,2 kW angezeigt, obwohl das Auto nicht lädt. Dadurch kommt es zu nicht nachvollziehbaren "Energiebilanzen" (siehe beigefügter Screenshot.

Das Log (Ladepunkt auf TRACE) dazu sieht wie folgt aus:

[main  ] INFO 2023/01/22 09:59:27 evcc 0.111.1
[main  ] INFO 2023/01/22 09:59:27 using config file: /etc/evcc.yaml
[main  ] INFO 2023/01/22 09:59:27 starting ui and api at :7070
[db    ] INFO 2023/01/22 09:59:27 using sqlite database: /root/.evcc/evcc.db
[mqtt  ] INFO 2023/01/22 09:59:27 connecting evcc-1271262625 at tcp://loxberry.fritz.box:1883
[mqtt  ] DEBUG 2023/01/22 09:59:28 tcp://loxberry.fritz.box:1883 connected
[site  ] INFO 2023/01/22 09:59:33 site config:
[site  ] INFO 2023/01/22 09:59:33   meters:      grid ✓ pv ✓ battery ✓
[site  ] INFO 2023/01/22 09:59:33     grid:      power ✓ energy ✗ currents ✗
[site  ] INFO 2023/01/22 09:59:33     pv 1:      power ✓ energy ✗ currents ✗
[site  ] INFO 2023/01/22 09:59:33     battery 1: power ✓ energy ✗ currents ✗ soc ✓ capacity ✗
[site  ] INFO 2023/01/22 09:59:33   vehicles:
[site  ] INFO 2023/01/22 09:59:33     vehicle 1: range ✓ finish ✓ status ✓ climate ✓ wakeup ✗
[lp-1  ] INFO 2023/01/22 09:59:33 loadpoint 1:
[lp-1  ] INFO 2023/01/22 09:59:33   mode:        off
[lp-1  ] INFO 2023/01/22 09:59:33   charger:     power ✓ energy ✓ currents ✓ phases ✓ wakeup ✗
[lp-1  ] INFO 2023/01/22 09:59:33   meters:      charge ✓
[lp-1  ] INFO 2023/01/22 09:59:33     charge:    power ✓ energy ✓ currents ✓
[lp-1  ] DEBUG 2023/01/22 09:59:33 phase timer inactive
[lp-1  ] DEBUG 2023/01/22 09:59:33 pv timer inactive
[site  ] DEBUG 2023/01/22 09:59:33 ----
[lp-1  ] DEBUG 2023/01/22 09:59:33 charge power: 10178W
[site  ] DEBUG 2023/01/22 09:59:34 pv power: 16W
[site  ] DEBUG 2023/01/22 09:59:34 battery soc: 10%
[site  ] DEBUG 2023/01/22 09:59:34 battery power: 0W
[site  ] DEBUG 2023/01/22 09:59:34 grid power: 549W
[site  ] DEBUG 2023/01/22 09:59:34 site power: 649W
[lp-1  ] DEBUG 2023/01/22 09:59:34 charge currents: [0.007 0.008 0.008]A
[lp-1  ] DEBUG 2023/01/22 09:59:34 charger status: B
[lp-1  ] INFO 2023/01/22 09:59:34 car connected
[lp-1  ] DEBUG 2023/01/22 09:59:34 vehicle api refresh
[lp-1  ] DEBUG 2023/01/22 09:59:34 pv timer elapse
[lp-1  ] DEBUG 2023/01/22 09:59:34 pv timer inactive
[main  ] DEBUG 2023/01/22 09:59:35 vehicle status: B (Audi Q4 e-tron)
[lp-1  ] INFO 2023/01/22 09:59:35 vehicle updated: unknown -> Audi Q4 e-tron
[lp-1  ] DEBUG 2023/01/22 09:59:35 set charge mode: pv
[lp-1  ] DEBUG 2023/01/22 09:59:35 set min soc: 25
[lp-1  ] DEBUG 2023/01/22 09:59:35 set target soc: 80
[lp-1  ] DEBUG 2023/01/22 09:59:35 vehicle soc: 99%
[lp-1  ] DEBUG 2023/01/22 09:59:35 vehicle soc limit: 80%
[lp-1  ] DEBUG 2023/01/22 09:59:35 vehicle range: 361km
[lp-1  ] DEBUG 2023/01/22 09:59:35 targetSoc reached: 99.0% > 80%
[lp-1  ] DEBUG 2023/01/22 09:59:35 climater active: false, target temp: 22.0°C, outside temp: 22.0°C
[site  ] DEBUG 2023/01/22 09:59:35 ----

Ich sehe auch in der Easee Cloud folgenden Status zur Wallbox:

Eventuell hat hier Easee einen Fehler.
Könnt ihr das bestätigen?

Viele Grüße,
Christian

[premultiply]

Ja, die Easee-Cloud liefert falsche Daten.