|
| 1 | +# generated by Slic3r 1.3.0-dev on 2018-02-26 00:23:53 |
| 2 | +adaptive_slicing = 0 |
| 3 | +adaptive_slicing_quality = 75% |
| 4 | +avoid_crossing_perimeters = 0 |
| 5 | +bed_shape = 0x0,190x0,190x180,0x180 |
| 6 | +bed_temperature = 60 |
| 7 | +before_layer_gcode = |
| 8 | +between_objects_gcode = |
| 9 | +bottom_infill_pattern = rectilinear |
| 10 | +bottom_solid_layers = 3 |
| 11 | +bridge_acceleration = 0 |
| 12 | +bridge_fan_speed = 100 |
| 13 | +bridge_flow_ratio = 1 |
| 14 | +bridge_speed = 55 |
| 15 | +brim_connections_width = 0 |
| 16 | +brim_width = 0 |
| 17 | +compatible_printers = |
| 18 | +complete_objects = 1 |
| 19 | +cooling = 1 |
| 20 | +default_acceleration = 0 |
| 21 | +disable_fan_first_layers = 2 |
| 22 | +dont_support_bridges = 1 |
| 23 | +duplicate_distance = 6 |
| 24 | +end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" |
| 25 | +end_gcode = M104 S0 ; turn off temperature\nM140 S0*83 ; Cama Caliente Off\nG28 X0 ; home X axis\nG1 Y170.000 ; Entrega la pieza\nM84 ; disable motors\n |
| 26 | +external_perimeter_extrusion_width = 0 |
| 27 | +external_perimeter_speed = 50% |
| 28 | +external_perimeters_first = 0 |
| 29 | +extra_perimeters = 1 |
| 30 | +extruder_clearance_height = 25 |
| 31 | +extruder_clearance_radius = 25 |
| 32 | +extruder_offset = 0x0 |
| 33 | +extrusion_axis = E |
| 34 | +extrusion_multiplier = 1 |
| 35 | +extrusion_width = 0 |
| 36 | +fan_always_on = 1 |
| 37 | +fan_below_layer_time = 60 |
| 38 | +filament_colour = #0085A9 |
| 39 | +filament_cost = 83000 |
| 40 | +filament_density = 1.24 |
| 41 | +filament_diameter = 1.75 |
| 42 | +filament_max_volumetric_speed = 0 |
| 43 | +filament_notes = "Shop: eSum \n\nCaracteristicas\n- Densidad: 1.24\n- Temperaturas: 205 -225 °C" |
| 44 | +filament_settings_id = |
| 45 | +fill_angle = 45 |
| 46 | +fill_density = 20% |
| 47 | +fill_gaps = 1 |
| 48 | +fill_pattern = honeycomb |
| 49 | +first_layer_acceleration = 0 |
| 50 | +first_layer_bed_temperature = 65 |
| 51 | +first_layer_extrusion_width = 200% |
| 52 | +first_layer_height = 100% |
| 53 | +first_layer_speed = 50% |
| 54 | +first_layer_temperature = 212 |
| 55 | +gap_fill_speed = 20 |
| 56 | +gcode_arcs = 0 |
| 57 | +gcode_comments = 0 |
| 58 | +gcode_flavor = reprap |
| 59 | +has_heatbed = 1 |
| 60 | +host_type = octoprint |
| 61 | +infill_acceleration = 0 |
| 62 | +infill_every_layers = 1 |
| 63 | +infill_extruder = 1 |
| 64 | +infill_extrusion_width = 0 |
| 65 | +infill_first = 0 |
| 66 | +infill_only_where_needed = 0 |
| 67 | +infill_overlap = 15% |
| 68 | +infill_speed = 50 |
| 69 | +interface_shells = 0 |
| 70 | +interior_brim_width = 0 |
| 71 | +layer_gcode = |
| 72 | +layer_height = 0.15 |
| 73 | +match_horizontal_surfaces = 0 |
| 74 | +max_fan_speed = 100 |
| 75 | +max_layer_height = 0.3 |
| 76 | +max_print_speed = 80 |
| 77 | +max_volumetric_speed = 0 |
| 78 | +min_fan_speed = 80 |
| 79 | +min_layer_height = 0.15 |
| 80 | +min_print_speed = 15 |
| 81 | +min_skirt_length = 0 |
| 82 | +notes = Configuracion para impresora 3D Prusa i3, desarrollada por Rootdevel Hackerpsace. \nConfiguración estandar, recomendadp para peizas medianas o grandes\n\nCaracteristica Impresora \n- Extrudert Titan\n- E3D V6\n\nAltura Capa\n- 0.2\n\nExtrusion\n- Auto\n\nRelleno \n- Panal de Abeja\n- No relleno completo por capas\n\nDensidad \n- 20%\n- Priemra capa 90% (Problemas adesion = 120%): 90% |
| 83 | +nozzle_diameter = 0.4 |
| 84 | +octoprint_apikey = |
| 85 | +only_retract_when_crossing_perimeters = 1 |
| 86 | +ooze_prevention = 0 |
| 87 | +output_filename_format = [input_filename_base].gcode |
| 88 | +overhangs = 1 |
| 89 | +perimeter_acceleration = 0 |
| 90 | +perimeter_extruder = 1 |
| 91 | +perimeter_extrusion_width = 0.3 |
| 92 | +perimeter_speed = 45 |
| 93 | +perimeters = 3 |
| 94 | +post_process = |
| 95 | +pressure_advance = 0 |
| 96 | +print_host = |
| 97 | +print_settings_id = |
| 98 | +printer_notes = Caracteristicas\n- Retracción para Titan extruder + hotend E3D V6 (Corta)\n\nFilamento \n- PLA (No compenzar ) |
| 99 | +printer_settings_id = |
| 100 | +raft_layers = 0 |
| 101 | +regions_overlap = 0 |
| 102 | +resolution = 0 |
| 103 | +retract_before_travel = 2 |
| 104 | +retract_layer_change = 1 |
| 105 | +retract_length = 0.7 |
| 106 | +retract_length_toolchange = 10 |
| 107 | +retract_lift = 0.2 |
| 108 | +retract_lift_above = 0 |
| 109 | +retract_lift_below = 0 |
| 110 | +retract_restart_extra = 0 |
| 111 | +retract_restart_extra_toolchange = 0 |
| 112 | +retract_speed = 40 |
| 113 | +seam_position = aligned |
| 114 | +sequential_print_priority = 0 |
| 115 | +serial_port = |
| 116 | +serial_speed = 250000 |
| 117 | +shortcuts = support_material |
| 118 | +skirt_distance = 1 |
| 119 | +skirt_height = 1 |
| 120 | +skirts = 2 |
| 121 | +slowdown_below_layer_time = 30 |
| 122 | +small_perimeter_speed = 20 |
| 123 | +solid_infill_below_area = 70 |
| 124 | +solid_infill_every_layers = 0 |
| 125 | +solid_infill_extruder = 1 |
| 126 | +solid_infill_extrusion_width = 0 |
| 127 | +solid_infill_speed = 40 |
| 128 | +spiral_vase = 0 |
| 129 | +standby_temperature_delta = -5 |
| 130 | +start_filament_gcode = "; Filament gcode\n" |
| 131 | +start_gcode = G28 ; home all axes\nG29; Auto-Leveling\nG1 Z5 F5000 ; lift nozzle\n |
| 132 | +support_material = 0 |
| 133 | +support_material_angle = 0 |
| 134 | +support_material_buildplate_only = 0 |
| 135 | +support_material_contact_distance = 0.2 |
| 136 | +support_material_enforce_layers = 0 |
| 137 | +support_material_extruder = 1 |
| 138 | +support_material_extrusion_width = 0 |
| 139 | +support_material_interface_extruder = 1 |
| 140 | +support_material_interface_extrusion_width = 0 |
| 141 | +support_material_interface_layers = 3 |
| 142 | +support_material_interface_spacing = 0 |
| 143 | +support_material_interface_speed = 100% |
| 144 | +support_material_pattern = rectilinear |
| 145 | +support_material_spacing = 2.5 |
| 146 | +support_material_speed = 50 |
| 147 | +support_material_threshold = 6 |
| 148 | +temperature = 210 |
| 149 | +thin_walls = 1 |
| 150 | +threads = 8 |
| 151 | +toolchange_gcode = |
| 152 | +top_infill_extrusion_width = 0.2 |
| 153 | +top_infill_pattern = rectilinear |
| 154 | +top_solid_infill_speed = 20 |
| 155 | +top_solid_layers = 3 |
| 156 | +travel_speed = 130 |
| 157 | +use_firmware_retraction = 0 |
| 158 | +use_relative_e_distances = 0 |
| 159 | +use_volumetric_e = 0 |
| 160 | +vibration_limit = 0 |
| 161 | +wipe = 1 |
| 162 | +xy_size_compensation = 0 |
| 163 | +z_offset = -1.1 |
| 164 | +z_steps_per_mm = 0 |
0 commit comments