feed-ingress-deployment-gorb.yml

# Example deployment for launching feed-ingress, the nginx ingress controller.
#
apiVersion: extensions/v1beta1
kind: Deployment
metadata:
  name: feed-ingress
  namespace: kube-system
  labels:
    app: feed-ingress
spec:
  replicas: 3
  selector:
    matchLabels:
      app: feed-ingress
  template:
    metadata:
      labels:
        app: feed-ingress
    spec:

      # Listen directly on host interface, required so ELBs can contact nginx.
      hostNetwork: true

      # Time to wait for requests to gracefully terminate when updating the deployment.
      # Needs to be at least as long as the -drain-delay setting below, with a buffer for other teardown.
      # Recommend to set this to 2x -drain-delay.
      terminationGracePeriodSeconds: 60

      # Always restart on death.
      restartPolicy: Always

      containers:
      - image: skycirrus/feed-ingress:v1.2.0
        name: feed-ingress
        securityContext:
          capabilities:
            add:
            - NET_ADMIN
            - NET_BIND_SERVICE
        env:
        - name: INSTANCEIP
          valueFrom:
            fieldRef:
              fieldPath: status.podIP

        resources:
          requests:
            cpu: "1"
            memory: 300Mi
          limits:
            memory: 300Mi

        ports:
        - hostPort: 80
          containerPort: 80
          name: ingress
          protocol: TCP
        - hostPort: 8081
          containerPort: 8081
          name: ingress-health
          protocol: TCP
        # Health port of the controller.
        - containerPort: 12082
          name: health
          protocol: TCP

        args:
        # Ingress nginx port that ELBs will direct traffic towards.
        - -ingress-port=80

        # Health port on nginx, used by ELBs to determine health.
        - -ingress-health-port=8081

        # Default security whitelist for ingress. Can be overridden with the sky.uk/allow annotation.
        - -ingress-allow=10.0.0.0/8

        # Health port for the controller to respond on.
        - -health-port=12082

        # Log level of nginx. Recommended to leave at error, or set to crit if too much spam.
        - -nginx-loglevel=error

        # How often to reload nginx if needed. Setting too low can cause 504s from the ELB in the case of heavy
        # ingress updates.
        - -nginx-update-period=5m

        # Use pushgateway for prometheus metrics. Optional - metrics available at /metrics on health port.
        - -pushgateway=mypushgateway.com
        - -pushgateway-interval=20
        - -pushgateway-label=k8s_cluster=dev
        - -pushgateway-label=environment=dev
        - -pushgateway-label=version=v1.0.2

        # Specify gorb as the registration component
        - -registration-frontend-type=gorb

        # VIP of the IPVS managed via gor
        - -gorb-vip-loadbalancer=10.10.0.10

        # Define gorb base url
        - -gorb-endpoint=http://10.154.0.11:4672

        # Comma separated list of virtual service definition to create via gorb
        - -gorb-services-definition=http-proxy:80

        # Enable loopback management to make Direct Return effective
        - -gorb-management-loopback=true

        # Path to the proc file system containing the main interface definition
        - -gorb-interface-proc-fs-path=/host-ipv4-proc/

        # packet-forwarding method to set via gorb
        - -gorb-backend-method=dr

        # gorb backend weight
        - -gorb-backend-weight=1000

        # gorb backend healthcheck interval
        - -gorb-backend-healthcheck-interval=1s

        # gorb backend healthcheck type
        - -gorb-backend-healthcheck-type=http

        # nginx host ip address to use when the ingress is not in AWS
        - -gorb-ingress-instance-ip=$(INSTANCEIP)

        # LB drain time - time to wait while the load balancer drains requests from feed when stopping. Should be
        # at least as long as the ELBs drain timeout.
        - -drain-delay=30s

        # Each worker uses a full cpu, so scale up vertically on a box by increasing this value.
        - -nginx-workers=1

        # Connections*workers needs to be less than available ephemeral ports. Linux default is 60999-32768=28231.
        - -nginx-worker-connections=20000

        # Needs to be greater than any frontend idle timeout.
        - -nginx-keepalive-seconds=304

        # CIDRs of the ELBs to trust X-Forwarded-For, for determining client IP allow/deny.
        - -nginx-trusted-frontends=10.0.0.0/8

        # Max number of idle connections to a backend.
        - -nginx-backend-keepalive-count=1024

        # Default max time for a request to a backend. Can be overridden by an annotation on the ingress resource.
        - -nginx-default-backend-timeout-seconds=5

        # Needs to be greater than 64 to support very large domain names.
        - -nginx-server-names-hash-bucket-size=128

        # Access logs turned on - add or remove the "-access-log" flag to turn them on/off.
        - -access-log
        - -access-log-dir=/var/log/nginx

        # Add custom headers to the access logs.
        - -nginx-log-headers=X-Amzn-Trace-Id

        # Controller health determines readiness. This has no effect on ingress traffic from ELBs.
        readinessProbe:
          httpGet:
            path: /health
            port: 12082
            scheme: HTTP
          initialDelaySeconds: 1
          timeoutSeconds: 1
          periodSeconds: 1
          failureThreshold: 1

        # Only consider liveness of ingress itself, favouring uptime over controller health.
        livenessProbe:
          httpGet:
            path: /health
            port: 8081
            scheme: HTTP
          initialDelaySeconds: 30
          timeoutSeconds: 1
          periodSeconds: 10
          failureThreshold: 3

        volumeMounts:
        # Access logs volume.
        - name: nginx-log
          mountPath: /var/log/nginx
        # Used for loopback address management
        - name: ipv4-proc
          mountPath: /host-ipv4-proc/

      volumes:
      - name: nginx-log
        emptyDir: {}
      - name: ipv4-proc
        hostPath:
          path: /proc/sys/net/ipv4/conf/ens160/