Issue #618: Add Geekworm X1011 quad-NVMe HAT.

Author: geerlingguy

_hats/geekworm-x1011-4-drive-nvme.md

@@ -0,0 +1,15 @@
+---
+layout: hat
+title: "Geekworm X1011 PCIe to Four M.2 NVMe HAT"
+short_description: A quad NVMe M.2 SSD HAT for Pi 5.
+status: production
+picture: "/images/hat-geekworm-x1011-4-drive-nvme.jpg"
+github_issue: "https://github.com/geerlingguy/raspberry-pi-pcie-devices/issues/618"
+link: "https://geekworm.com/collections/raspberry-pi/products/x1011"
+videos: []
+---
+Geekworm's X1011 is a 4-drive M.2 NVMe SSD carrier which uses an ASmedia PCIe Gen 2 switch to bridge four NVMe drives to a Raspberry Pi 5.
+
+It looks like it includes some Pogo pins to provide power to (or leech power from) the Pi 5's USB-C supply input. It has a warning to not plug in both the 5V barrel plug and Pi 5 USB-C power input at the same time (and it may not have any safety in place to prevent a short circuit if you do!).
+
+It supports M.2 drives in 2230/2242/2260/2280 lengths, and does not support NVMe boot (because of the switch), at least not until Raspberry Pi resolves the issue [Can't boot Pi 5 via NVMe behind PCIe switch / bridge](https://github.com/raspberrypi/firmware/issues/1833).