diff --git a/boards_cm/45drives-storinator-jr.html b/boards_cm/45drives-storinator-jr.html
index a99ef08d6..0c2c7f391 100644
--- a/boards_cm/45drives-storinator-jr.html
+++ b/boards_cm/45drives-storinator-jr.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The Storinator Jr. includes 16 2.5” SATA drives, a CM4 on the official IO Board, and an LSI 9405W-16i HBA. It is limited to around 400 MiB/sec storage throughput, but since it only has 1 Gbps Ethernet, that’s not going to be a bottleneck if you just use it for network storage.","headline":"45Drives’ Storinator Jr","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/45drives-storinator-jr.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/45drives-storinator-jr.html"}
diff --git a/boards_cm/52pi-cm4-router-board.html b/boards_cm/52pi-cm4-router-board.html
index aa1c090ae..cdbb38cc8 100644
--- a/boards_cm/52pi-cm4-router-board.html
+++ b/boards_cm/52pi-cm4-router-board.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"52Pi’s CM4 Router Board has two full-speed gigabit network ports, with the second port directly attached to the Pi’s PCI Express bus for greater performance. It is designed especially for OpenWRT.","headline":"52Pi CM4 Router Board","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/52pi-cm4-router-board.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/52pi-cm4-router-board.html"}
diff --git a/boards_cm/al-pitron-cm4.html b/boards_cm/al-pitron-cm4.html
index 5153909b6..2c3852924 100644
--- a/boards_cm/al-pitron-cm4.html
+++ b/boards_cm/al-pitron-cm4.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Kontron just introduced their AL Pi-Tron CM4, which is a stainless-steel-enclosed CM4 computer with multiple industrial interfaces. The enclosure includes dual Ethernet (1 Gbps and 10/100 Mbps), 2x USB 2.0, 1x USB 2.0 OTG, 1x RS232, 1x RS485, 1x CAN 2.0 FD, 2x DIO, and accepts a 24V DC input. The enclosure mounts on a 35mm rail (EN 60715) and is rated for IP20 protection.","headline":"Kontron AL Pi-Tron CM4","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/al-pitron-cm4.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/al-pitron-cm4.html"}
diff --git a/boards_cm/atomic-nixie-clock.html b/boards_cm/atomic-nixie-clock.html
index b4347feac..6162614b9 100644
--- a/boards_cm/atomic-nixie-clock.html
+++ b/boards_cm/atomic-nixie-clock.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The Raspberry Pi Atomic Nixie Clock by Will Whang (@will127534) uses the Symmetricom Rubidium Oscillator in a similar way to the Time Card.","headline":"Raspberry Pi Atomic Nixie Clock","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/atomic-nixie-clock.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/atomic-nixie-clock.html"}
diff --git a/boards_cm/atx-watchdog-cm4.html b/boards_cm/atx-watchdog-cm4.html
index e864bd495..9ea20a58e 100644
--- a/boards_cm/atx-watchdog-cm4.html
+++ b/boards_cm/atx-watchdog-cm4.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The ATX Watchdog for CM4 is an ATX power supply that stacks on the IO Board’s HAT connection and provides 12V/3A power to the CM4 via the 4-pin berg/floppy power connector, plus 12/5VDC (3A… at what voltage?) screw terminals to power other project circuits in addition to the Pi. It also includes a watchdog timer, safe shutdown capability, and a lighted power button.","headline":"ATX Watchdog for CM4","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/atx-watchdog-cm4.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/atx-watchdog-cm4.html"}
diff --git a/boards_cm/axzez-interceptor-carrier-board.html b/boards_cm/axzez-interceptor-carrier-board.html
index 261d0db5f..3c3510cae 100644
--- a/boards_cm/axzez-interceptor-carrier-board.html
+++ b/boards_cm/axzez-interceptor-carrier-board.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Axzez’s Interceptor CM4 Carrier Board has:","headline":"Axzez Interceptor Carrier Board","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/axzez-interceptor-carrier-board.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/axzez-interceptor-carrier-board.html"}
diff --git a/boards_cm/bigtreetech-cb1.html b/boards_cm/bigtreetech-cb1.html
index ac986e0d5..56501318b 100644
--- a/boards_cm/bigtreetech-cb1.html
+++ b/boards_cm/bigtreetech-cb1.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This is a CM4-alternative board, which is pin-compatible though with slightly lower specs. See the linked GitHub issue for more details, but it includes a slightly slower Allwiner H616, has 1 GB of LPDDR3 SDRAM, 10/100 Mbps Ethernet, and built-in WiFi.","headline":"BIGTREETECH CB1","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/bigtreetech-cb1.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/bigtreetech-cb1.html"}
diff --git a/boards_cm/bigtreetech-pi4b.html b/boards_cm/bigtreetech-pi4b.html
index 94cdcb5f9..b5a13e1f7 100644
--- a/boards_cm/bigtreetech-pi4b.html
+++ b/boards_cm/bigtreetech-pi4b.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This board is almost identical to a Pi 4 model B in its layout—the ports are all in the exact same places, though the DSI and CSI display/camera connectors are slightly different due to the Compute Module’s positioning. Also missing is any USB 3.0 (that is replaced by two extra USB 2.0 ports), and there is no PoE HAT compatibility. The Ethernet port is labeled as 1Gbps, but will only be 10/100 if you buy BigTreeTech’s CB1 board instead of a CM4.","headline":"BIGTREETECH PI4B","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/bigtreetech-pi4b.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/bigtreetech-pi4b.html"}
diff --git a/boards_cm/bigtreetech-raspberry-pad-5.html b/boards_cm/bigtreetech-raspberry-pad-5.html
index c54c57220..53831eda8 100644
--- a/boards_cm/bigtreetech-raspberry-pad-5.html
+++ b/boards_cm/bigtreetech-raspberry-pad-5.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"See the GitHub issue for updates on testing and more details.","headline":"BIGTREETECH Raspberry Pad 5","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/bigtreetech-raspberry-pad-5.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/bigtreetech-raspberry-pad-5.html"}
diff --git a/boards_cm/bladeberry-cm4.html b/boards_cm/bladeberry-cm4.html
index 8f8df70d0..4e7a68721 100644
--- a/boards_cm/bladeberry-cm4.html
+++ b/boards_cm/bladeberry-cm4.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The BladeBerry is currently in the prototype stage, but has a lot of similarities (though is a bit simpler than) the Uptime.Lab CM4 Blade server. It has PoE+, M.2 NVMe SSD, microSD slot for Lite modules, <5W power consumption.","headline":"BladeBerry v1.0","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/bladeberry-cm4.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/bladeberry-cm4.html"}
diff --git a/boards_cm/blikube-blikvm-cm4-io-board.html b/boards_cm/blikube-blikvm-cm4-io-board.html
index 46a70f5fe..f7fb87ed6 100644
--- a/boards_cm/blikube-blikvm-cm4-io-board.html
+++ b/boards_cm/blikube-blikvm-cm4-io-board.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The BliKVM CM4 IO Board for Pi-KVM is currently available through AliExpress).","headline":"blicube’s bliKVM CM4 IO Board for Pi-KVM","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/blikube-blikvm-cm4-io-board.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/blikube-blikvm-cm4-io-board.html"}
diff --git a/boards_cm/blikvm-pci-express-card.html b/boards_cm/blikvm-pci-express-card.html
index 7076b61a3..30e0815cb 100644
--- a/boards_cm/blikvm-pci-express-card.html
+++ b/boards_cm/blikvm-pci-express-card.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The BliKVM PCI Express CM4 Card slots into a PCI Express slot (with a x1 edge connector), but doesn’t get power or connectivity through PCI Express. It instead gets power via PoE or from a rear USB-C port, since it is built to be an internal KVM over IP card. Basically, a PiKVM that’s installed directly inside the computer, with Ethernet, USB, and power connections exposed on the back.","headline":"blicube’s BliKVM PCI Express CM4 Card","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/blikvm-pci-express-card.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/blikvm-pci-express-card.html"}
diff --git a/boards_cm/blinkinlabs-raspberry-router.html b/boards_cm/blinkinlabs-raspberry-router.html
index 457c6d1f0..3ffd25364 100644
--- a/boards_cm/blinkinlabs-raspberry-router.html
+++ b/boards_cm/blinkinlabs-raspberry-router.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This is a router design based around a Compute Module 4, and it uses a KSZ9897 switch and a LAN7431 PCIe-to-Ethernet adapter.","headline":"Blinkinlabs Raspberry Router","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/blinkinlabs-raspberry-router.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/blinkinlabs-raspberry-router.html"}
diff --git a/boards_cm/chipsee-aio-cm4-156.html b/boards_cm/chipsee-aio-cm4-156.html
index 00dff119e..2971a84e3 100644
--- a/boards_cm/chipsee-aio-cm4-156.html
+++ b/boards_cm/chipsee-aio-cm4-156.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The AIO-CM4-156 is an all-in-one desktop computer based on Raspberry Pi CM4. It includes two USB 3.0 ports, a full-size HDMI port (so you can have a 2nd external display), 1 Gbps Ethernet, a microSD card slot, 3.5mm audio output, and a full 40 pin GPIO port. Internally, there’s also an NVMe SSD M.2 slot (SSD optional). The screen can be made to be a touchscreen, optionally, and the enclosure includes built-in speakers.","headline":"Chipsee AIO CM4-156","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/chipsee-aio-cm4-156.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/chipsee-aio-cm4-156.html"}
diff --git a/boards_cm/chipsee-ppc-cm4-101.html b/boards_cm/chipsee-ppc-cm4-101.html
index 67faf601b..5c4443bad 100644
--- a/boards_cm/chipsee-ppc-cm4-101.html
+++ b/boards_cm/chipsee-ppc-cm4-101.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The Chipsee 10.1” Industrial Panel PC (model PPC-CM4-101) is a 10.1” touchscreen powered by a Raspberry Pi.","headline":"Chipsee Industrial Panel PC PPC-CM4-101","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/chipsee-ppc-cm4-101.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/chipsee-ppc-cm4-101.html"}
diff --git a/boards_cm/cm-hunter.html b/boards_cm/cm-hunter.html
index 925b49ffd..64d5cb539 100644
--- a/boards_cm/cm-hunter.html
+++ b/boards_cm/cm-hunter.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The CM Hunter is an open source hardware carrier board with ISO interfaces. It includes three galvanically-isolated interfaces:","headline":"CM Hunter","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/cm-hunter.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/cm-hunter.html"}
diff --git a/boards_cm/cm4-3d-printer-mayermakes.html b/boards_cm/cm4-3d-printer-mayermakes.html
index 154922443..ff8011663 100644
--- a/boards_cm/cm4-3d-printer-mayermakes.html
+++ b/boards_cm/cm4-3d-printer-mayermakes.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The Compute Module 4 Powered 3D Printer Board, created by Clem (@MAYERMAKES from Element14 Presents, includes Trinamic Stepper drivers, an ESP32-S2, an ATMega2560-16AU, and many other components. The board allows you to use a CM4 to control the 3D printer’s motors, rather than using a computer.","headline":"CM4-Powered 3D Printer Board by @MayerMakes","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/cm4-3d-printer-mayermakes.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/cm4-3d-printer-mayermakes.html"}
diff --git a/boards_cm/cm4-handheld-juckettd.html b/boards_cm/cm4-handheld-juckettd.html
index 23d346300..de895e1b2 100644
--- a/boards_cm/cm4-handheld-juckettd.html
+++ b/boards_cm/cm4-handheld-juckettd.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This gaming handheld uses a CM4 to power the Retropie operating system and the official Rasperry Pi 7” screen. It is largely based on the CM4 IO carrier board but includes a Teensy LC board, Power Circuit, and Audio Circuit for enchanced functionality.","headline":"Aegis - a CM4 Handheld Gaming Device","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/cm4-handheld-juckettd.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/cm4-handheld-juckettd.html"}
diff --git a/boards_cm/cm4-matx.html b/boards_cm/cm4-matx.html
index fb4e0be77..46a6f535f 100644
--- a/boards_cm/cm4-matx.html
+++ b/boards_cm/cm4-matx.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"CM4 MATX is a project aiming to create an open source, micro-ATX standard-compliant motherboard for the Raspberry Pi Compute Module 4.","headline":"CM4 MATX","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/cm4-matx.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/cm4-matx.html"}
diff --git a/boards_cm/cm4-nas-mebs-t.html b/boards_cm/cm4-nas-mebs-t.html
index 77cd2cc8a..645ae404a 100644
--- a/boards_cm/cm4-nas-mebs-t.html
+++ b/boards_cm/cm4-nas-mebs-t.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This Compute Module 4 carrier board design exposes a subset of the CM4’s interfaces, including its single PCIe gen 2 lane to accept an external SATA controller card. This design is based off of the official Raspberry Pi Foundation’s CM4 IO board (the KiCad project is available on the IO board official page).","headline":"CM4 SATA NAS by mebs_t","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/cm4-nas-mebs-t.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/cm4-nas-mebs-t.html"}
diff --git a/boards_cm/cm4-net-carrier-board.html b/boards_cm/cm4-net-carrier-board.html
index 1ea02954c..7514e726b 100644
--- a/boards_cm/cm4-net-carrier-board.html
+++ b/boards_cm/cm4-net-carrier-board.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The CM4 Net Carrier Board is a carrier board that supplies power to the Pi and exposes its built-in NIC through an Ethernet port. Nice and simple. It looks like it also allows switching modes for the USB-C connector so it can provide power or allow use as USB OTG for flashing eMMC Compute Modules.","headline":"CM4 Net Carrier Board","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/cm4-net-carrier-board.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/cm4-net-carrier-board.html"}
diff --git a/boards_cm/cm4-pi-4-cluster-hat.html b/boards_cm/cm4-pi-4-cluster-hat.html
index 97ae69da0..55f23bf31 100644
--- a/boards_cm/cm4-pi-4-cluster-hat.html
+++ b/boards_cm/cm4-pi-4-cluster-hat.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"@will127534 is back with the [CM4 Pi 4 Cluster HAT], which is by far the most compact and powerful Pi cluster on the planet—it packs four Compute Module 4s onto a HAT the size of a Pi 4 model B and even throws in a Raspberry Pi Pico for management tasks! It has a built-in Gigabit network switch to provide networking to all the CM4s.","headline":"CM4 Pi 4 Cluster Hat","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/cm4-pi-4-cluster-hat.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/cm4-pi-4-cluster-hat.html"}
diff --git a/boards_cm/cm4-pocket-chip.html b/boards_cm/cm4-pocket-chip.html
index b20cb8718..f0996633f 100644
--- a/boards_cm/cm4-pocket-chip.html
+++ b/boards_cm/cm4-pocket-chip.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This CM4 Handheld is based on the now-discontinued Pocket C.H.I.P., and allows for handheld use and retro gaming on its built-in touchscreen display. It includes a full keypad below the display, all built on top of a nice looking PCB!","headline":"CM4 Pocket C.H.I.P. Clone","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/cm4-pocket-chip.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/cm4-pocket-chip.html"}
diff --git a/boards_cm/cm4-slot-control-carrier-board.html b/boards_cm/cm4-slot-control-carrier-board.html
index 379539fd7..c1832bce1 100644
--- a/boards_cm/cm4-slot-control-carrier-board.html
+++ b/boards_cm/cm4-slot-control-carrier-board.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Aljaz Titoric’s CM4 Slot Control carrier board has HDMI/DSI, Ethernet, USB, UARTs and many IO connections.","headline":"CM4 Slot Control Carrier Board","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/cm4-slot-control-carrier-board.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/cm4-slot-control-carrier-board.html"}
diff --git a/boards_cm/cm4-the-stick.html b/boards_cm/cm4-the-stick.html
index 3c0276e4e..3ccaa0bf3 100644
--- a/boards_cm/cm4-the-stick.html
+++ b/boards_cm/cm4-the-stick.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This carrier board for the Compute Module 4 is only a tiny bit larger than the 100 pin connector, powers the CM4, and breaks out 8 GPIO pins, 5V, 3.3V, and Ground. Not a huge amount of IO, but perfect for the simplest use case—powering up a CM4 and maybe interacting with a couple controls.","headline":"The Stick","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/cm4-the-stick.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/cm4-the-stick.html"}
diff --git a/boards_cm/compute-module-4-io-board.html b/boards_cm/compute-module-4-io-board.html
index 946b6a6ca..5e3adc097 100644
--- a/boards_cm/compute-module-4-io-board.html
+++ b/boards_cm/compute-module-4-io-board.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Exposing every interface from Raspberry Pi Compute Module 4, the Compute Module 4 IO Board provides a development platform and reference base-board design for our most powerful Compute Module yet.","headline":"Raspberry Pi Compute Module 4 IO Board","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/compute-module-4-io-board.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/compute-module-4-io-board.html"}
diff --git a/boards_cm/currypi-cm4.html b/boards_cm/currypi-cm4.html
index 57d0aa313..4a1b366c5 100644
--- a/boards_cm/currypi-cm4.html
+++ b/boards_cm/currypi-cm4.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The CurryPi CM4 Cluster board was hinted at in @aep’s Twitter post. It’s a 4-node CM4 cluster board. It looks like each Pi gets an M.2 NVMe slot, and each node gets its own network jack on the rear. Looking at the project’s GitHub repository, it seems like there is some active development and improvements to the board’s power management are underway.","headline":"CurryPi CM4 Cluster Board","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/currypi-cm4.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/currypi-cm4.html"}
diff --git a/boards_cm/cutiepie-tablet.html b/boards_cm/cutiepie-tablet.html
index e82c964c9..ee1036c46 100644
--- a/boards_cm/cutiepie-tablet.html
+++ b/boards_cm/cutiepie-tablet.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"CutiePi is an ultra portable Raspberry Pi tablet.","headline":"CutiePie Tablet","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/cutiepie-tablet.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/cutiepie-tablet.html"}
diff --git a/boards_cm/cytron-cm4-maker-board.html b/boards_cm/cytron-cm4-maker-board.html
index 383530354..fd6a3b483 100644
--- a/boards_cm/cytron-cm4-maker-board.html
+++ b/boards_cm/cytron-cm4-maker-board.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Cytron’s CM4 Maker Board is a carrier board meant for testing and experimentation. It has a full-size GPIO header with LEDs for certain GPIO pin status, buttons attached to other GPIO, Grove and Stemma QT connectors for prototyping, an RTC and buzzer, Audio output, and a 2242 M.2 NVMe slot.","headline":"Cytron CM4 Maker Board","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/cytron-cm4-maker-board.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/cytron-cm4-maker-board.html"}
diff --git a/boards_cm/deskpi-super6c.html b/boards_cm/deskpi-super6c.html
index f31632ad6..7cce2df4e 100644
--- a/boards_cm/deskpi-super6c.html
+++ b/boards_cm/deskpi-super6c.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The DeskPi Super6C is a standard size mini-ITX board that supports up to 6 CM4 modules, with an M.2 slot and microSD card slot available to each of the boards. It uses a 4-pin ATX CPU power plug, and has two RJ45 Gigabit Ethernet ports connected through an onboard 8-port Gigabit switch.","headline":"DeskPi Super6C","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/deskpi-super6c.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/deskpi-super6c.html"}
diff --git a/boards_cm/dfrobot-cm4-iot-router.html b/boards_cm/dfrobot-cm4-iot-router.html
index f1d869eb2..3e50f8ada 100644
--- a/boards_cm/dfrobot-cm4-iot-router.html
+++ b/boards_cm/dfrobot-cm4-iot-router.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The IoT Router Board Mini is the smallest two-port dual-gigabit router board for the Compute Module 4. It is a no-frills 2-port gigabit router, with the 2nd port using an RTL8111 network chip on the PCI express bus, meaning you’ll have two full gigabit network interfaces.","headline":"DFRobot IoT Router Carrier Board Mini","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/dfrobot-cm4-iot-router.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/dfrobot-cm4-iot-router.html"}
diff --git a/boards_cm/edatec-cm4-industrial-computer.html b/boards_cm/edatec-cm4-industrial-computer.html
index 33e052c8a..700255463 100644
--- a/boards_cm/edatec-cm4-industrial-computer.html
+++ b/boards_cm/edatec-cm4-industrial-computer.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The EDATEC CM4 Industrial is a CM4 carrier and metal enclosure that provides a number of helpful interfaces for the Pi CM4, like separate 10/100 and 1 Gbps Ethernet ports, access to all GPIO and I/O connections from the CM4 SoC, a built-in relay, 2x DI, 2x RS485, RS232, 3x ADC, RTC and Fan controllers, a SIM card slot and PCIe slot for modules like 4G LTE modems, and more.","headline":"EDATEC CM4 Industrial Computer","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/edatec-cm4-industrial-computer.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/edatec-cm4-industrial-computer.html"}
diff --git a/boards_cm/edatec-cm4-media-computer.html b/boards_cm/edatec-cm4-media-computer.html
index aa20f5084..65d5318f5 100644
--- a/boards_cm/edatec-cm4-media-computer.html
+++ b/boards_cm/edatec-cm4-media-computer.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The EDATEC CM4 Media is a CM4 carrier and tiny machined metal enclosure meant for media use. It includes built-in speakers, an audio output, a built-in camera and microphone, and USB 3.0, HDMI, and Ethernet ports.","headline":"EDATEC CM4 Media Computer","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/edatec-cm4-media-computer.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/edatec-cm4-media-computer.html"}
diff --git a/boards_cm/edatec-cm4-nano-computer.html b/boards_cm/edatec-cm4-nano-computer.html
index c060557e9..901c6b56e 100644
--- a/boards_cm/edatec-cm4-nano-computer.html
+++ b/boards_cm/edatec-cm4-nano-computer.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The EDATEC CM4 Nano is an embedded computer designed for industrial applications based on Raspberry Pi Compute Module 4. It’s metal enclosure helps with heat dissipation for the CPU, wireless module and PMU. The external WiFi and Bluetooth antenna improves the reliability of wireless communication.","headline":"EDATEC CM4 Nano Computer","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/edatec-cm4-nano-computer.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/edatec-cm4-nano-computer.html"}
diff --git a/boards_cm/edatec-cm4-sensing-computer.html b/boards_cm/edatec-cm4-sensing-computer.html
index e1d932d97..3fb671a42 100644
--- a/boards_cm/edatec-cm4-sensing-computer.html
+++ b/boards_cm/edatec-cm4-sensing-computer.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The EDATEC CM4 Sensing is an industrial computer designed for IoT & Data Acquisition applications based on Raspberry Pi Compute Module 4. It provides 4G/LTE module, 4 channels RS485,1 channel RS232, 1 channel CAN, 1 channel Gigabit Ethernet port, alarm buzzer ,battery-powered real-time clock, 2 channels USB2.0 and 1 channel Micro USB2.0 interface.","headline":"EDATEC CM4 Sensing Computer","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/edatec-cm4-sensing-computer.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/edatec-cm4-sensing-computer.html"}
diff --git a/boards_cm/gpio-base-raspi-cm4.html b/boards_cm/gpio-base-raspi-cm4.html
index 30ae0bf82..7eb004959 100644
--- a/boards_cm/gpio-base-raspi-cm4.html
+++ b/boards_cm/gpio-base-raspi-cm4.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"From taskit, the gpio.base Raspi CM4 allows a huge array of modular industrial IO in a compact form factor, and there is also a starterkit variety which includes three of the most common IO boards:","headline":"gpio.base Raspi CM4","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/gpio-base-raspi-cm4.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/gpio-base-raspi-cm4.html"}
diff --git a/boards_cm/gumstix-raspberry-pi-cm4-devboard.html b/boards_cm/gumstix-raspberry-pi-cm4-devboard.html
index 8b7256702..7097b23d7 100644
--- a/boards_cm/gumstix-raspberry-pi-cm4-devboard.html
+++ b/boards_cm/gumstix-raspberry-pi-cm4-devboard.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Designed by Gumstix in Geppetto, the Gumstix Raspberry Pi CM4 Development Board brings the best of the CM4 to light, from PCIe to Gigabit Ethernet to dual CSI2 cameras. Whether you’re building a NAS server or a face-detecting robot, The CM4 Development board has built-in features that will help your project along.","headline":"Gumstix Raspberry Pi CM4 Development Board","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/gumstix-raspberry-pi-cm4-devboard.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/gumstix-raspberry-pi-cm4-devboard.html"}
diff --git a/boards_cm/gumstix-rpi-cm4-uprev.html b/boards_cm/gumstix-rpi-cm4-uprev.html
index f5e85176a..a0a5a75fe 100644
--- a/boards_cm/gumstix-rpi-cm4-uprev.html
+++ b/boards_cm/gumstix-rpi-cm4-uprev.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"From Gumstix: Note, this board is not compatible with CM3Lite.","headline":"Gumstix Raspberry Pi CM4 Uprev","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/gumstix-rpi-cm4-uprev.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/gumstix-rpi-cm4-uprev.html"}
diff --git a/boards_cm/harlab-cm4-nano.html b/boards_cm/harlab-cm4-nano.html
index 758dcfd3a..389888d62 100644
--- a/boards_cm/harlab-cm4-nano.html
+++ b/boards_cm/harlab-cm4-nano.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"CM4Ext Nano is the smallest baseboard for Raspberry Pi Compute Module 4. Measuring only 55x40mm, it brings power of Raspberry Pi 4 to a slightly bigger footprint that Raspberry Pi Zero. It’s compatible with all Compute Module 4 boards, including eMMC and Lite versions.","headline":"Harlab’s CM4Ext Nano","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/harlab-cm4-nano.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/harlab-cm4-nano.html"}
diff --git a/boards_cm/home-assistant-yellow.html b/boards_cm/home-assistant-yellow.html
index 52e09cf79..9a3df0577 100644
--- a/boards_cm/home-assistant-yellow.html
+++ b/boards_cm/home-assistant-yellow.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The Home Assistant Yellow board is a ready-to-use device based on the Raspberry Pi Compute Module 4, and is the easiest way to run Home Assistant and experience the best home automation in the world.","headline":"Home Assistant Yellow","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/home-assistant-yellow.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/home-assistant-yellow.html"}
diff --git a/boards_cm/jakub-gal-tpu-cam.html b/boards_cm/jakub-gal-tpu-cam.html
index 64b334c9c..3f7486265 100644
--- a/boards_cm/jakub-gal-tpu-cam.html
+++ b/boards_cm/jakub-gal-tpu-cam.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This board combines a Coral Edge TPU with a Raspberry Pi CM4 to process two camera streams from imx219 camera sensors.","headline":"TPU Cam by Jakub Gál","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/jakub-gal-tpu-cam.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/jakub-gal-tpu-cam.html"}
diff --git a/boards_cm/johanns_carrier_board.html b/boards_cm/johanns_carrier_board.html
index e9c05ca02..9599fa17a 100644
--- a/boards_cm/johanns_carrier_board.html
+++ b/boards_cm/johanns_carrier_board.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Warning","headline":"Johann’s Carrier Board","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/johanns_carrier_board.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/johanns_carrier_board.html"}
diff --git a/boards_cm/kincony-kc868.html b/boards_cm/kincony-kc868.html
index b148a7943..a9f31e096 100644
--- a/boards_cm/kincony-kc868.html
+++ b/boards_cm/kincony-kc868.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Kincony’s KC868-Server is a smart controller for home automation and industrial automation. It takes analog and digital input, supports MOFSET output, and integrates an ESP32 module and a Raspberry Pi CM4.","headline":"Kincony’s KC868-Server","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/kincony-kc868.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/kincony-kc868.html"}
diff --git a/boards_cm/lim-cm4-board.html b/boards_cm/lim-cm4-board.html
index 2a93416a0..667ead541 100644
--- a/boards_cm/lim-cm4-board.html
+++ b/boards_cm/lim-cm4-board.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The LiM is the most minimal implementation of a Raspberry Pi CM4 carrier board, with only a USB-C port for power, and status LEDs.","headline":"LiM Carrier Board","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/lim-cm4-board.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/lim-cm4-board.html"}
diff --git a/boards_cm/lincoln-binns-cm4box-pro.html b/boards_cm/lincoln-binns-cm4box-pro.html
index 3c1f7db31..c519aceac 100644
--- a/boards_cm/lincoln-binns-cm4box-pro.html
+++ b/boards_cm/lincoln-binns-cm4box-pro.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The CM4-BoxPro is a line of enclosures and custom carrier board for the Raspberry Pi Compute Module 4, and includes surface, DIN, and VESA mounting options, as well as a 19” 1U rackmount option.","headline":"CM4-BoxPro","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/lincoln-binns-cm4box-pro.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/lincoln-binns-cm4box-pro.html"}
diff --git a/boards_cm/mcuzone-cm4-4g.html b/boards_cm/mcuzone-cm4-4g.html
index d22bde60b..c87869dfa 100644
--- a/boards_cm/mcuzone-cm4-4g.html
+++ b/boards_cm/mcuzone-cm4-4g.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This board has two Ethernet ports - a standard 1 Gbps port an a 100 Mbps port. It also has an M.2 E-key slot capable of connecting a 4G LTE card, and is powered via USB-C. It has a full size HDMI port, and an optional case with one or two antenna mounts (for WiFi + 4G).","headline":"MCUzone CM4 4G","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/mcuzone-cm4-4g.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/mcuzone-cm4-4g.html"}
diff --git a/boards_cm/mcuzone-cm4-usb-3x4.html b/boards_cm/mcuzone-cm4-usb-3x4.html
index 33c1896e3..65f34cbf8 100644
--- a/boards_cm/mcuzone-cm4-usb-3x4.html
+++ b/boards_cm/mcuzone-cm4-usb-3x4.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This board’s claim to fame is the fact that it includes the standard assortment of minimal ports (OTG, USB-C power, HDMI, and Ethernet), but also includes USB 3.0 ports out of the box, courtesy of a USB 3.0 chip on the carrier board itself.","headline":"Mcuzone CM4_USB3.0x4","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/mcuzone-cm4-usb-3x4.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/mcuzone-cm4-usb-3x4.html"}
diff --git a/boards_cm/mcuzone-cm4_tiny.html b/boards_cm/mcuzone-cm4_tiny.html
index 713263ba3..7327fd1b4 100644
--- a/boards_cm/mcuzone-cm4_tiny.html
+++ b/boards_cm/mcuzone-cm4_tiny.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The CM4_Tiny is a minimalist CM4 carrier board with dual HDMI outputs, as well as a subset of the I/O available through the Compute Module 4.","headline":"CM4_Tiny","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/mcuzone-cm4_tiny.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/mcuzone-cm4_tiny.html"}
diff --git a/boards_cm/mercury-streamer.html b/boards_cm/mercury-streamer.html
index 494ea70f2..805fb562f 100644
--- a/boards_cm/mercury-streamer.html
+++ b/boards_cm/mercury-streamer.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The Mercury Streamer (formerly known as ‘CM4AES’) is built by Pi 2 Design, who has a history of making high-quality audio output devices for the Raspberry Pi.","headline":"Mercury Streamer (formerly CM4AES)","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/mercury-streamer.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/mercury-streamer.html"}
diff --git a/boards_cm/mii-store-cm4-adapter-board.html b/boards_cm/mii-store-cm4-adapter-board.html
index 39b7a7d30..8921b2d70 100644
--- a/boards_cm/mii-store-cm4-adapter-board.html
+++ b/boards_cm/mii-store-cm4-adapter-board.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Check the GitHub issue for updates on the testing process.","headline":"Electric Mii Store Raspberry Pi CM4 to PI4B Adapter Expansion Board","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/mii-store-cm4-adapter-board.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/mii-store-cm4-adapter-board.html"}
diff --git a/boards_cm/milu-x-industrial.html b/boards_cm/milu-x-industrial.html
index 374972020..7f3859d9a 100644
--- a/boards_cm/milu-x-industrial.html
+++ b/boards_cm/milu-x-industrial.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The Milü-X Industrial IoT Gateway System is an IECEx-certified edge industrial computer powered by a Raspberry Pi Compute Module 4. Its specs include an explosion-proof enclosure with isolated Ethernet, wireless, and power cable glands, two M.2 NVMe slots for redundant storage, two M.2 slots for WiFi and 4G or 5G wireless, a high-temp RTC battery, and a massive heatsink attached to the Pi for high temperature use.","headline":"Milü-X Industrial IoT Gateway System","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/milu-x-industrial.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/milu-x-industrial.html"}
diff --git a/boards_cm/mini-ss-main-board-cm4-lite.html b/boards_cm/mini-ss-main-board-cm4-lite.html
index 511e16d8e..5b49d0434 100644
--- a/boards_cm/mini-ss-main-board-cm4-lite.html
+++ b/boards_cm/mini-ss-main-board-cm4-lite.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The Mini SS supports mini HDMI and CRT (Composite and RGBS) output. There’s a planned extension board that would also give 1 Gbps network and a connector for the original Sega Saturn A/V cable. The Mini SS board emulates the original console using RetroPie 4.71 or later.","headline":"Mini SS Main Board for CM4 Lite","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/mini-ss-main-board-cm4-lite.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/mini-ss-main-board-cm4-lite.html"}
diff --git a/boards_cm/minimal-rpi-cm4-carrier-board.html b/boards_cm/minimal-rpi-cm4-carrier-board.html
index 3f231ad12..760188e8c 100644
--- a/boards_cm/minimal-rpi-cm4-carrier-board.html
+++ b/boards_cm/minimal-rpi-cm4-carrier-board.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The most minimal USB-C powered CM4 carrier board yet. It only features a single USB 2.0 port, a single HDMI port, a USB-C power plug, and a microSD card slot. Very tiny.","headline":"Minimal RPi CM4 Carrier Board by dronecz","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/minimal-rpi-cm4-carrier-board.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/minimal-rpi-cm4-carrier-board.html"}
diff --git a/boards_cm/mirkopc.html b/boards_cm/mirkopc.html
index e4abfa3ea..8f274c81e 100644
--- a/boards_cm/mirkopc.html
+++ b/boards_cm/mirkopc.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The MirkoPC is truly a ‘micro’ PC, powered by the Compute Module 4. It includes many features that make it stand out, like a full-size M.2 M-key slot on the top, suitable for NVMe SSD drives, and a built-in DAC and headphone amp!","headline":"MirkoPC - a CM4 Computer","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/mirkopc.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/mirkopc.html"}
diff --git a/boards_cm/mirkos-bitpirat-computer-2.html b/boards_cm/mirkos-bitpirat-computer-2.html
index 85faeb004..18db66d3c 100644
--- a/boards_cm/mirkos-bitpirat-computer-2.html
+++ b/boards_cm/mirkos-bitpirat-computer-2.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Mirko’s BitPiRat Computer (Gen 2) is the smallest CM4 carrier board that crams a full-size M.2 NVMe slot on the underside, as well as a bevy of IO on the topside.","headline":"Mirko’s BitPiRat Computer (Gen 2)","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/mirkos-bitpirat-computer-2.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/mirkos-bitpirat-computer-2.html"}
diff --git a/boards_cm/mirkos-picoberry-carrier-board.html b/boards_cm/mirkos-picoberry-carrier-board.html
index 899de6dce..d0ee1b929 100644
--- a/boards_cm/mirkos-picoberry-carrier-board.html
+++ b/boards_cm/mirkos-picoberry-carrier-board.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Mirko’s PicoBerry is a tiny CM4 carrier board with USB-C power input, some status LEDs, and a full 40-pin GPIO header. It’s only usable with eMMC compute modules, but makes for a tidy little carrier if you just need to work with WiFi + GPIO in your project.","headline":"Mirko’s PicoBerry","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/mirkos-picoberry-carrier-board.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/mirkos-picoberry-carrier-board.html"}
diff --git a/boards_cm/mnt-reform-rpicm4-som.html b/boards_cm/mnt-reform-rpicm4-som.html
index d9d8d83d0..b5571bc16 100644
--- a/boards_cm/mnt-reform-rpicm4-som.html
+++ b/boards_cm/mnt-reform-rpicm4-som.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The MNT Reform CM4 Processor Module Adapter is a Raspberry Pi Compute Module 4 adapter for the MNT Reform open hardware laptop.","headline":"MNT Reform RCM4 Adapter","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/mnt-reform-rpicm4-som.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/mnt-reform-rpicm4-som.html"}
diff --git a/boards_cm/mpi4-mediaplayer-kit.html b/boards_cm/mpi4-mediaplayer-kit.html
index df35f01da..4ac1a14a2 100644
--- a/boards_cm/mpi4-mediaplayer-kit.html
+++ b/boards_cm/mpi4-mediaplayer-kit.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Sharp / NEC displays has a MPi4 NEC MediaPlayer Kit available that connects a Raspberry Pi directly into one of their display solutions using their modular display system.","headline":"MPi4 NEC MediaPlayer Kit","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/mpi4-mediaplayer-kit.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/mpi4-mediaplayer-kit.html"}
diff --git a/boards_cm/nebra-cm4-flashstick.html b/boards_cm/nebra-cm4-flashstick.html
index f559cda60..6eecb5292 100644
--- a/boards_cm/nebra-cm4-flashstick.html
+++ b/boards_cm/nebra-cm4-flashstick.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Nebra’s CM4 Flashstick is a very simple open source hardware design meant for flashing Compute Module 4’s—both writing to onboard eMMC and managing their bootloaders.","headline":"Nebra CM4 Flashstick","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/nebra-cm4-flashstick.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/nebra-cm4-flashstick.html"}
diff --git a/boards_cm/ochin-tiny-carrier.html b/boards_cm/ochin-tiny-carrier.html
index 12e7fb4b9..438224314 100644
--- a/boards_cm/ochin-tiny-carrier.html
+++ b/boards_cm/ochin-tiny-carrier.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The Ochin Tiny Carrier Board for Raspberry Pi Compute Module 4 is a very compact CM4-sized carrier board that exposes a number of interfaces on the topside, including CSI/DSI, USB 2.0, USART, UART, I2C, and SPI. The board is built for robotics and includes a DC-DC regulator for up to 7 amps, GHS connectors, and a current limiting switch.","headline":"Ochin Tiny Carrier Board","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/ochin-tiny-carrier.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/ochin-tiny-carrier.html"}
diff --git a/boards_cm/olvint-cm4-nas-minipcie.html b/boards_cm/olvint-cm4-nas-minipcie.html
index 9814bf628..a0648fdba 100644
--- a/boards_cm/olvint-cm4-nas-minipcie.html
+++ b/boards_cm/olvint-cm4-nas-minipcie.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Main purpose of design is to make NAS with more reliable SATA connection comparing to USB-to-SATA converters. SATA controllers can be connected through MiniPCIe slot. There are variety of cards in market, mainly the intent was to use this for 2 SATA drives. This is half size card. Cards for 4 SATA with RAID controller also can be connected.","headline":"CM4 NAS Mini PCIe by olvint","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/olvint-cm4-nas-minipcie.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/olvint-cm4-nas-minipcie.html"}
diff --git a/boards_cm/onlogic-factor-201.html b/boards_cm/onlogic-factor-201.html
index 99492e306..c6bdbd47b 100644
--- a/boards_cm/onlogic-factor-201.html
+++ b/boards_cm/onlogic-factor-201.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"From the OnLogic website: Factor 201 leverages the Raspberry Pi Compute Module 4 (CM4) to bring the power and flexibility of Raspberry Pi to the industrial edge. Combined with our industrial grade custom carrier board and our unique passive cooling technology, it’s the Raspberry Pi IoT solution you’ve been waiting for.","headline":"Factor 201 Raspberry Pi Industrial IoT Gateway","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/onlogic-factor-201.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/onlogic-factor-201.html"}
diff --git a/boards_cm/onlogic-factor-202.html b/boards_cm/onlogic-factor-202.html
index 242adcf5a..69ab56c88 100644
--- a/boards_cm/onlogic-factor-202.html
+++ b/boards_cm/onlogic-factor-202.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"From the OnLogic website: Factor 202 leverages the Raspberry Pi Compute Module 4 (CM4) to provide the power and flexibility of Raspberry Pi in an industrial controller built for the IoT edge. Onboard digital and analog I/O (DIO & AIO), as well as a capacitive touchscreen, give you unmatched control over your application.","headline":"Factor 202 Raspberry Pi Industrial IoT Gateway","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/onlogic-factor-202.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/onlogic-factor-202.html"}
diff --git a/boards_cm/over-board-mini-itx.html b/boards_cm/over-board-mini-itx.html
index 7ec6456db..0ea09ce39 100644
--- a/boards_cm/over-board-mini-itx.html
+++ b/boards_cm/over-board-mini-itx.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"In addition to the standard Raspberry Pi interfaces found on the various standard models and the Compute Module I/O board, the Over:Board offers a full-size PCI-Express slot (but still just the 1x single-lane PCI-E v2.0 bus), a 24-pin ATX power header, Real-Time Clock with backup battery, RS232 (DB9) COM port, USB 2.0 4-port hub with two physical ports, USB Audio IC with Line-out and Mic-in, and a USB SATA controller for HDD/SSD storage.","headline":"Over:Board Mini ITX motherboard","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/over-board-mini-itx.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/over-board-mini-itx.html"}
diff --git a/boards_cm/parvus-duracor-pi.html b/boards_cm/parvus-duracor-pi.html
index e824d3daf..bdb4b9735 100644
--- a/boards_cm/parvus-duracor-pi.html
+++ b/boards_cm/parvus-duracor-pi.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The Parvus DuraCOR Pi from Curtiss-Wright is an ‘ultra-small form factor rugged mission computer’ in a MIL-STD rugged sealed housing. It exposes all IO through MIL-STD-38999 connectors, including all 40 GPIO pins.","headline":"Parvus DuraCOR Pi","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/parvus-duracor-pi.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/parvus-duracor-pi.html"}
diff --git a/boards_cm/pi-cast.html b/boards_cm/pi-cast.html
index 087c1dec7..c6f9a516b 100644
--- a/boards_cm/pi-cast.html
+++ b/boards_cm/pi-cast.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Pi-Cast makes a variety of small PiKVM boxes with various features, from extra USB ports to a built-in KVM switcher for multiple inputs. Their basic model offers Ethernet over the USB 3.0 USB-C connection that also powers the device, so you can manage a device using only a tablet (like an iPad) or direct wire it to your computer.","headline":"Pi-Cast KVM","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/pi-cast.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/pi-cast.html"}
diff --git a/boards_cm/pi4gpu.html b/boards_cm/pi4gpu.html
index 136f9885e..5aba03b8c 100644
--- a/boards_cm/pi4gpu.html
+++ b/boards_cm/pi4gpu.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This board is a collaboration between Mirek of Mirkotronics and Jeff Geerling.","headline":"Pi4GPU","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/pi4gpu.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/pi4gpu.html"}
diff --git a/boards_cm/pibox-2-mini-nas.html b/boards_cm/pibox-2-mini-nas.html
index 8d4654284..f2c1a3e61 100644
--- a/boards_cm/pibox-2-mini-nas.html
+++ b/boards_cm/pibox-2-mini-nas.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The PiBox is an ultra-modular two or five-bay NAS storage solution for the Raspberry Pi CM4. It allows the use of up to 2 (or 5, in the larger model) SATA drives and includes HDMI and Gigabit Ethernet.","headline":"PiBox 2 Mini","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/pibox-2-mini-nas.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/pibox-2-mini-nas.html"}
diff --git a/boards_cm/picam-module.html b/boards_cm/picam-module.html
index f65155796..2a0435ef7 100644
--- a/boards_cm/picam-module.html
+++ b/boards_cm/picam-module.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Ledato’s PiCam Module for the CM4 is a simple and ultra-compact board to mount a Raspberry Pi Camera and Compute Module 4 in a very tiny form factor, even smaller than that of the CM4Ext Nano that I’ve previously tested. The default setup includes wifi-connect, motioneye, and tensorflow, so you can stream a feed with object detection out to other computers on the network!","headline":"PiCam Module","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/picam-module.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/picam-module.html"}
diff --git a/boards_cm/pikeeb.html b/boards_cm/pikeeb.html
index edfab7533..ee58da614 100644
--- a/boards_cm/pikeeb.html
+++ b/boards_cm/pikeeb.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"PiKeeb is the RaspberryPi-enabled battery-powered open-source hackable digital typewriter with hot-swappable mechanical switches.","headline":"PiKeeb - Open Source Digital Typewriter","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/pikeeb.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/pikeeb.html"}
diff --git a/boards_cm/pikvm-v4.html b/boards_cm/pikvm-v4.html
index 378d51043..d02a54352 100644
--- a/boards_cm/pikvm-v4.html
+++ b/boards_cm/pikvm-v4.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The PiKVM v4 is the latest iteration of the reference PiKVM device. It comes in two CM4-powered variants: the Plus and the mini.","headline":"PiKVM v4","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/pikvm-v4.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/pikvm-v4.html"}
diff --git a/boards_cm/pintry-x2.html b/boards_cm/pintry-x2.html
index af3fef4e5..bf01adde9 100644
--- a/boards_cm/pintry-x2.html
+++ b/boards_cm/pintry-x2.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"From the official project page:","headline":"Pintry X2","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/pintry-x2.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/pintry-x2.html"}
diff --git a/boards_cm/pistorm-cm4-amiga.html b/boards_cm/pistorm-cm4-amiga.html
index 3bd6fbae8..c0097c9fb 100644
--- a/boards_cm/pistorm-cm4-amiga.html
+++ b/boards_cm/pistorm-cm4-amiga.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The PiStorm32 from Claude Scwarz is a 32bit Open Source accelerator card for Commodore Amiga computers, using the CM4 for Motorola 68000 CPU emulation, NVMe drive, graphics card available from AmigaOS among more things. It is however closed source until it has been brought up and is fully working, so no one tries to sell expensive paper weights based on a bad revision of the board.","headline":"PiStorm32 CM4 Amiga","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/pistorm-cm4-amiga.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/pistorm-cm4-amiga.html"}
diff --git a/boards_cm/piunora-metro-ff-m2.html b/boards_cm/piunora-metro-ff-m2.html
index 1f7246198..e682d4ea3 100644
--- a/boards_cm/piunora-metro-ff-m2.html
+++ b/boards_cm/piunora-metro-ff-m2.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"A carrier for the Raspberry Pi CM4 in an Adafruit Metro/Arduino form-factor. It features full-size HDMI, USB-C (USB Device data+power), USB-A, M.2 (PCI-E), RGB LED, 6 ADC inputs (2 extra channels as solder pads), two user-programmable buttons, full size camera connector and a Qwiic/Stemma QT connector for I2C devices.","headline":"Piunora - CM4 in Metro/Arduino form factor","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/piunora-metro-ff-m2.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/piunora-metro-ff-m2.html"}
diff --git a/boards_cm/pizza4-micro-server.html b/boards_cm/pizza4-micro-server.html
index bb8c407fc..c47159579 100644
--- a/boards_cm/pizza4-micro-server.html
+++ b/boards_cm/pizza4-micro-server.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The Pizza4 Micro from OpenEmbed has two built-in Gigabit Ethernet ports and an NVMe socket, which run through a PCI express switch built into the board. It also includes full-size HDMI outputs, two USB 2.0 ports, a microSD card slot for CM4 Lite modules, and a nice enclosure complete with power button.","headline":"Pizza4 Micro Server","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/pizza4-micro-server.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/pizza4-micro-server.html"}
diff --git a/boards_cm/pockit.html b/boards_cm/pockit.html
index 9c0dc397d..e5cc05712 100644
--- a/boards_cm/pockit.html
+++ b/boards_cm/pockit.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The Pockit is a modular Linux computer based on the Raspberry Pi Compute Module 4. The full system will include 80+ ‘BLOCKS’ that can be snapped together to make for a complete computer tailored to an individual project’s needs. There’s a demo video that highlights the latest developments for the project.","headline":"Pockit","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/pockit.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/pockit.html"}
diff --git a/boards_cm/pspi-compute.html b/boards_cm/pspi-compute.html
index bb55dd6c2..19e039d1b 100644
--- a/boards_cm/pspi-compute.html
+++ b/boards_cm/pspi-compute.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The PSPi Compute is a Compute Module 4-based set of boards that fit inside a PSP case.","headline":"PSPi Compute","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/pspi-compute.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/pspi-compute.html"}
diff --git a/boards_cm/radxa-taco.html b/boards_cm/radxa-taco.html
index 6cdbd32ff..e0af352af 100644
--- a/boards_cm/radxa-taco.html
+++ b/boards_cm/radxa-taco.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The Radxa Taco is the ultimate CM4 carrier board designed for NAS/server/router applications. The idea is based on the Quad SATA HAT for the Raspberry Pi 4 and goes much further. The Radxa Taco has the following features:","headline":"Radxa Taco","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/radxa-taco.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/radxa-taco.html"}
diff --git a/boards_cm/raspberry-pi-cm4-tv-stick.html b/boards_cm/raspberry-pi-cm4-tv-stick.html
index 7bfc03f2e..109bb5b87 100644
--- a/boards_cm/raspberry-pi-cm4-tv-stick.html
+++ b/boards_cm/raspberry-pi-cm4-tv-stick.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The Raspberry Pi CM4 TV Stick is a carrier that plugs directly to HDMI port. Perfect for Kodi, RetroPie, or just using a Pi attached directly to a monitor or TV for any use case. Power is through USB-C, though.","headline":"Raspberry Pi CM4 TV Stick","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/raspberry-pi-cm4-tv-stick.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/raspberry-pi-cm4-tv-stick.html"}
diff --git a/boards_cm/retro-dreamer-g4a-cm4.html b/boards_cm/retro-dreamer-g4a-cm4.html
index 400aee636..fdfd4c39d 100644
--- a/boards_cm/retro-dreamer-g4a-cm4.html
+++ b/boards_cm/retro-dreamer-g4a-cm4.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The Retro Dreamer G4A CM4 is set to launch on Kickstarter soon, and it looks like it’s a custom CM4 board inside a GameBoy Advance case, with a 3.5” IPS LED display.","headline":"Retro Dreamer G4A CM4","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/retro-dreamer-g4a-cm4.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/retro-dreamer-g4a-cm4.html"}
diff --git a/boards_cm/retro-game-restore-gpimate-plus.html b/boards_cm/retro-game-restore-gpimate-plus.html
index 8e2a8d7c8..7a23396db 100644
--- a/boards_cm/retro-game-restore-gpimate-plus.html
+++ b/boards_cm/retro-game-restore-gpimate-plus.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The RgR GPiMate Plus adapter board integrates a Compute Module 4 into the Retroflag GPi CASE.","headline":"Retro Game Restore GPiMate Plus for CM4 Lite","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/retro-game-restore-gpimate-plus.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/retro-game-restore-gpimate-plus.html"}
diff --git a/boards_cm/retro-lite-cm4.html b/boards_cm/retro-lite-cm4.html
index 33179a27d..dfe8cf3a7 100644
--- a/boards_cm/retro-lite-cm4.html
+++ b/boards_cm/retro-lite-cm4.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The Retro Lite CM4 is a sleek, handheld gaming console based around the Compute Module 4. It is a collaboration project between StonedEdge and Dmcke5 on the BitBuilt forums. It is modelled in SolidWorks and the PCBs were designed in EAGLE. The final shell is machined 6061 aluminum.","headline":"Retro Lite CM4","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/retro-lite-cm4.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/retro-lite-cm4.html"}
diff --git a/boards_cm/retroflag-gpi-case-2.html b/boards_cm/retroflag-gpi-case-2.html
index 2c9b76a84..e39267e25 100644
--- a/boards_cm/retroflag-gpi-case-2.html
+++ b/boards_cm/retroflag-gpi-case-2.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Retroflag is out with their new Retroflag GPi CASE 2, which packs a CM4 into a Gameboy-style enclosure with USB-C charging, HDMI output, a 3.0” LCD, headphone out, and 2 USB 2 ports.","headline":"Retroflag GPi CASE 2","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/retroflag-gpi-case-2.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/retroflag-gpi-case-2.html"}
diff --git a/boards_cm/revolution-pi-revpi-4.html b/boards_cm/revolution-pi-revpi-4.html
index e467466e6..d5ce75764 100644
--- a/boards_cm/revolution-pi-revpi-4.html
+++ b/boards_cm/revolution-pi-revpi-4.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The RevPi 4 is an upcoming industrial pc solution built around the CM4, following in the footsteps of the previous RevPi Core 3+/Core 3/Core. The CM4 version is in late development stages according to this timeline.","headline":"Revolution Pi RevPi 4","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/revolution-pi-revpi-4.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/revolution-pi-revpi-4.html"}
diff --git a/boards_cm/routerpi.html b/boards_cm/routerpi.html
index 3ff9e8abb..0ad15aad8 100644
--- a/boards_cm/routerpi.html
+++ b/boards_cm/routerpi.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The RouterPihttps://blog.zakkemble.net/routerpi-compute-module-4-router/ is a simple and tidy CM4 Router Board with dual Ethernet ports. The first port is provided by the built-in NIC, and the second is through a Realtek RTL8111HS directly off the PCIe bus.","headline":"RouterPi","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/routerpi.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/routerpi.html"}
diff --git a/boards_cm/rpi-cm4-gigabit-switch-board.html b/boards_cm/rpi-cm4-gigabit-switch-board.html
index 7664f3fbd..d270f82b3 100644
--- a/boards_cm/rpi-cm4-gigabit-switch-board.html
+++ b/boards_cm/rpi-cm4-gigabit-switch-board.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"A project from @tlalexander, the Dual CM4 Gigabit Switch Board is a CM4 carrier board with integrated gigabit switch. It has three RJ45 jacks, each connected to a Microchip KSZ9567. This is a prelude to @tlalexander’s eventual plan to design a version of the board with four CM4s and one ethernet jack, all passed through the gig switch.","headline":"Dual CM4 Gigabit Switch Board","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/rpi-cm4-gigabit-switch-board.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/rpi-cm4-gigabit-switch-board.html"}
diff --git a/boards_cm/rpi4-rtc-poe.html b/boards_cm/rpi4-rtc-poe.html
index 854624a18..00ab0f1ed 100644
--- a/boards_cm/rpi4-rtc-poe.html
+++ b/boards_cm/rpi4-rtc-poe.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The RPi4-RTC-PoE from ab-log is a DIN rail mini server offers PoE power, Gigabit Ethernet, USB 2.0, USB-over-Ethernet, an M.2 2230 slot for NVMe SSDs, a power button, status LEDs, an RTC, hardware watchdog, RS485, and ZigBee, and is a very compact little DIN server.","headline":"RPi4-RTC-PoE DIN rail mini server","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/rpi4-rtc-poe.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/rpi4-rtc-poe.html"}
diff --git a/boards_cm/scalenode-cm4.html b/boards_cm/scalenode-cm4.html
index e3583c978..90093634b 100644
--- a/boards_cm/scalenode-cm4.html
+++ b/boards_cm/scalenode-cm4.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The baseboard has been optimized for 19-inch rack mount installations for distributed multi-node computing systems. It includes a PoE circuit, has an M.2 M-key slot for NVMe SSDs, and fits inside a 1U chassis.","headline":"Scalenode - server baseboard for CM4","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/scalenode-cm4.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/scalenode-cm4.html"}
diff --git a/boards_cm/seaberry.html b/boards_cm/seaberry.html
index 9a0beb32e..b3289a947 100644
--- a/boards_cm/seaberry.html
+++ b/boards_cm/seaberry.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The Seaberry is a Mini-ITX carrier board for the RPi Compute Module 4 with PCIe peripheral connectivity.","headline":"Seaberry - Mini ITX motherboard","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/seaberry.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/seaberry.html"}
diff --git a/boards_cm/seeed-dual-gig-cm4-routerboard.html b/boards_cm/seeed-dual-gig-cm4-routerboard.html
index 50caa1401..7e9a63191 100644
--- a/boards_cm/seeed-dual-gig-cm4-routerboard.html
+++ b/boards_cm/seeed-dual-gig-cm4-routerboard.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The Dual Gigabit Carrier Board powered by Raspberry Pi Compute Module 4 is equipped with Dual Gigabit Ethernet ports and dual USB 3.0 ports, making it suitable for soft router applications, while keeping the hardware to a minimum.","headline":"Seeed Studio Dual Gigabit Ethernet Carrier Board","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/seeed-dual-gig-cm4-routerboard.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/seeed-dual-gig-cm4-routerboard.html"}
diff --git a/boards_cm/seeed-edgebox-rpi-200.html b/boards_cm/seeed-edgebox-rpi-200.html
index 9574cc16d..ee66d2575 100644
--- a/boards_cm/seeed-edgebox-rpi-200.html
+++ b/boards_cm/seeed-edgebox-rpi-200.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This DIN rail mount inudstrial computer has built-in expansion, a Phoenix connector with multiple isolated inputs and outputs, and all the typical industrial interfaces (CANBUS, RS485, and more), and is easy to take apart and rebuild for any purpose, from remote sensing to industrial controls.","headline":"Seeed Studios EdgeBox-RPI-200","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/seeed-edgebox-rpi-200.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/seeed-edgebox-rpi-200.html"}
diff --git a/boards_cm/seeed-studio-reterminal-dm.html b/boards_cm/seeed-studio-reterminal-dm.html
index 7dc3c3d95..0f40f4b0e 100644
--- a/boards_cm/seeed-studio-reterminal-dm.html
+++ b/boards_cm/seeed-studio-reterminal-dm.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The reTerminal DM encloses a CM4 inside an enclosure incorporating a 10.1” multi-touch IPS display, multiple expansion slots, and multiple mounting options (DIN, VESA, flushmount).","headline":"Seeed Studio reTerminal DM","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/seeed-studio-reterminal-dm.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/seeed-studio-reterminal-dm.html"}
diff --git a/boards_cm/seeed-studio-reterminal.html b/boards_cm/seeed-studio-reterminal.html
index 6cf12844a..7ec6a8f25 100644
--- a/boards_cm/seeed-studio-reterminal.html
+++ b/boards_cm/seeed-studio-reterminal.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The reTerminal encloses a CM4 inside an enclosure incorporating a 720p 5” multi-touch IPS display, a high speed expansion interface, 2x USB 2.0, Gigabit Ethernet, a 40-in GPIO header, a Crypto co-processor, and more.","headline":"Seeed Studio reTerminal","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/seeed-studio-reterminal.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/seeed-studio-reterminal.html"}
diff --git a/boards_cm/sega-game-gear-drop-in-retropie-kit.html b/boards_cm/sega-game-gear-drop-in-retropie-kit.html
index b1a39e8d2..0bbab84c0 100644
--- a/boards_cm/sega-game-gear-drop-in-retropie-kit.html
+++ b/boards_cm/sega-game-gear-drop-in-retropie-kit.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The board, officially called the “Zega Mame Gear II controller-ZMG-CM4”, replaces the guts of a Sega Game Gear. It claims to get up to 4 hours play time from 2x 2,000 mAh batteries.","headline":"Zega II Game Gear drop-in CM4 RetroPie Kit","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/sega-game-gear-drop-in-retropie-kit.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/sega-game-gear-drop-in-retropie-kit.html"}
diff --git a/boards_cm/sferalabs-exo-sense-pi.html b/boards_cm/sferalabs-exo-sense-pi.html
index c6772911c..8a981f291 100644
--- a/boards_cm/sferalabs-exo-sense-pi.html
+++ b/boards_cm/sferalabs-exo-sense-pi.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The Exo Sense Pi is a multi-sensor package powered by a Compute Module 4.","headline":"Exo Sense Pi","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/sferalabs-exo-sense-pi.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/sferalabs-exo-sense-pi.html"}
diff --git a/boards_cm/sharp-nec-ds1-if20ce.html b/boards_cm/sharp-nec-ds1-if20ce.html
index 55939e6a0..0a7698a4a 100644
--- a/boards_cm/sharp-nec-ds1-if20ce.html
+++ b/boards_cm/sharp-nec-ds1-if20ce.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The Sharp/NEC DS1-IF20CE Compute Module Interface Board, product code MPI4E, is part of Sharp/NEC’s display solution for a MediaPlayer/SoC integration with their displays. Here is a user manual mentioning the board.","headline":"Sharp/NEC DS1-IF20CE Compute Module Interface Board","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/sharp-nec-ds1-if20ce.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/sharp-nec-ds1-if20ce.html"}
diff --git a/boards_cm/sigmoid-s7p.html b/boards_cm/sigmoid-s7p.html
index d8b4d65c9..3882f71c6 100644
--- a/boards_cm/sigmoid-s7p.html
+++ b/boards_cm/sigmoid-s7p.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This is the world’s first 3D-Printer Control Unit based on the all new Raspberry Pi 4 Compute Module.","headline":"Sigmoid S7P 3D Printer Board","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/sigmoid-s7p.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/sigmoid-s7p.html"}
diff --git a/boards_cm/sourcekit-pitray-mini.html b/boards_cm/sourcekit-pitray-mini.html
index 1ef1f8db8..1e3cc65d5 100644
--- a/boards_cm/sourcekit-pitray-mini.html
+++ b/boards_cm/sourcekit-pitray-mini.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The Sourcekit PiTray mini is a companion IO board for Raspberry Pi Compute Module (not included). It is designed for use both as a development system for Compute Module 4 and as an embedded board integrated into end products.","headline":"Sourcekit PiTray mini","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/sourcekit-pitray-mini.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/sourcekit-pitray-mini.html"}
diff --git a/boards_cm/stereopi-v2.html b/boards_cm/stereopi-v2.html
index 1165d970e..d4772b2b9 100644
--- a/boards_cm/stereopi-v2.html
+++ b/boards_cm/stereopi-v2.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"From the makers of StereoPi comes the StereoPi v2 - a CM4-based DIY stereoscopic camera. For computer vision learners, drone and robot builders, AR/VR and 360 panorama experimenters. Open-source. Now with WiFi, BT, and more power.","headline":"StereoPi - DIY stereoscopic camera","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/stereopi-v2.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/stereopi-v2.html"}
diff --git a/boards_cm/super-8-camera-digitizer.html b/boards_cm/super-8-camera-digitizer.html
index e240dd34e..ae8c9cd42 100644
--- a/boards_cm/super-8-camera-digitizer.html
+++ b/boards_cm/super-8-camera-digitizer.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The CM4 Super 8 Camera Digitizer is a prototype film cartridge replacement for Super 8 cameras that allows the direct digital capture of Super 8 video footage.","headline":"CM4 Super 8 Camera Digitizer","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/super-8-camera-digitizer.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/super-8-camera-digitizer.html"}
diff --git a/boards_cm/techbase-ai-gateway-9500-cm4.html b/boards_cm/techbase-ai-gateway-9500-cm4.html
index 4d91361c6..2eda544bd 100644
--- a/boards_cm/techbase-ai-gateway-9500-cm4.html
+++ b/boards_cm/techbase-ai-gateway-9500-cm4.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The AI GATEWAY 9500-CM4 marries a CM4 with a Google Coral TPU, over PCIe (though this might not be working yet—see Issue #44.","headline":"Techbase AI GATEWAY 9500-CM4","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/techbase-ai-gateway-9500-cm4.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/techbase-ai-gateway-9500-cm4.html"}
diff --git a/boards_cm/techbase-clusberry-9500-cm4.html b/boards_cm/techbase-clusberry-9500-cm4.html
index e0e4eff4f..5ce9438aa 100644
--- a/boards_cm/techbase-clusberry-9500-cm4.html
+++ b/boards_cm/techbase-clusberry-9500-cm4.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The ClusBerry 9500-CM4 is billed as an ‘Industrial Raspberry Pi Compute Module 4 Cluster’. It has a DIN rail case, a shared heatsink, and the standard set of modules includes an I/O board, a ‘Communication Gateway’, and an ‘AI Gateway’, all with different IO connections and purposes.","headline":"Techbase ClusBerry 9500-CM4","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/techbase-clusberry-9500-cm4.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/techbase-clusberry-9500-cm4.html"}
diff --git a/boards_cm/techbase-modberry-500-cm4.html b/boards_cm/techbase-modberry-500-cm4.html
index d9cbc4752..45420759c 100644
--- a/boards_cm/techbase-modberry-500-cm4.html
+++ b/boards_cm/techbase-modberry-500-cm4.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The ModBerry 500 CM4 is billed as an industrial IoT computer built on the CM4. It has significantly improved CPU performance, eMMC flash speed, and RAM over the previous CM3/CM3+ iteration.","headline":"Techbase ModBerry 500 CM4","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/techbase-modberry-500-cm4.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/techbase-modberry-500-cm4.html"}
diff --git a/boards_cm/timebeat-timecard-mini-pcie.html b/boards_cm/timebeat-timecard-mini-pcie.html
index 4acf69089..608b59f76 100644
--- a/boards_cm/timebeat-timecard-mini-pcie.html
+++ b/boards_cm/timebeat-timecard-mini-pcie.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Timebeat’s TimeCard mini PCIe card sits in a server’s PCIe slot, exposing two serial interfaces (one to an optional Raspberry Pi CM4, one to an optional GPS unit), and the card also holds a TXCO (Temperature Controlled Crystal Oscillator) or OXCO (Oven-Controlled Crystal Oscillator) to hold time very accurately if the signal is lost.","headline":"Timebeat Time Card mini PCIe","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/timebeat-timecard-mini-pcie.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/timebeat-timecard-mini-pcie.html"}
diff --git a/boards_cm/tinycar-cm4-markus-kasten.html b/boards_cm/tinycar-cm4-markus-kasten.html
index b80c73f1c..73e8e03b4 100644
--- a/boards_cm/tinycar-cm4-markus-kasten.html
+++ b/boards_cm/tinycar-cm4-markus-kasten.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This is a 6-layer CM4 carrier board designed by Markus Kasten that directly integrates two Google Coral TPUs.","headline":"TinyCar CM4","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/tinycar-cm4-markus-kasten.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/tinycar-cm4-markus-kasten.html"}
diff --git a/boards_cm/tofu-industrial-carrier.html b/boards_cm/tofu-industrial-carrier.html
index ae97a22f2..b84254501 100644
--- a/boards_cm/tofu-industrial-carrier.html
+++ b/boards_cm/tofu-industrial-carrier.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The TOFU board is a 9cm x 9cm carrier board for use with Raspberry Pi Compute Module 4 (CM4). Inspired by the official CM4IO board, it’s intended for industrial applications. It may also be used by enthusiasts looking for a compact yet complete solution to interface the many inputs and outputs of the single board computer.","headline":"TOFU Industrial CM4 Carrier","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/tofu-industrial-carrier.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/tofu-industrial-carrier.html"}
diff --git a/boards_cm/turing-pi-2.html b/boards_cm/turing-pi-2.html
index 02d00c391..9983e07d3 100644
--- a/boards_cm/turing-pi-2.html
+++ b/boards_cm/turing-pi-2.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Turing Pi is a compact ARM cluster that provides a secure and scalable compute in the edge. It is designed to make web-scale edge computing easier for developers. Turing Pi cluster architecture allows you to migrate and sync web apps with minimal friction. It provides you with complete control of the edge infrastructure and improves reliability.","headline":"Turing Pi 2","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/turing-pi-2.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/turing-pi-2.html"}
diff --git a/boards_cm/ucm4-tiny-board-kamil-lorenc.html b/boards_cm/ucm4-tiny-board-kamil-lorenc.html
index 328fe78c6..a1489ae63 100644
--- a/boards_cm/ucm4-tiny-board-kamil-lorenc.html
+++ b/boards_cm/ucm4-tiny-board-kamil-lorenc.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This board is the exact footprint of the CM4, and includes only the necessary components to get wired networking, a microSD card, and power (or USB OTG) to the CM4.","headline":"uCM4","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/ucm4-tiny-board-kamil-lorenc.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/ucm4-tiny-board-kamil-lorenc.html"}
diff --git a/boards_cm/uptime-lab-cm4-blade.html b/boards_cm/uptime-lab-cm4-blade.html
index cbf9c7ab0..eaaee3565 100644
--- a/boards_cm/uptime-lab-cm4-blade.html
+++ b/boards_cm/uptime-lab-cm4-blade.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"In just one rack unit up to 20 Compute Blades can be installed. Each Blade has its own NVMe SSD, 1 Gbps Ethernet with PoE support, and status LEDs. The TPM edition adds on a TPM 2.0 module, and the Dev module adds on a further set of features like HDMI, microSD, and USB-C ports.","headline":"Uptime Lab CM4 Blade","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/uptime-lab-cm4-blade.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/uptime-lab-cm4-blade.html"}
diff --git a/boards_cm/uptime-lab-cm4-mincab.html b/boards_cm/uptime-lab-cm4-mincab.html
index 188303cd1..852250398 100644
--- a/boards_cm/uptime-lab-cm4-mincab.html
+++ b/boards_cm/uptime-lab-cm4-mincab.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The MinCab from Uptime Lab is a minimal carrier board for the CM4. Uptime Lab doesn’t currently have any information about it on their website, but you can read more about the MinCab here and in @merocle’s Twitter thread here.","headline":"Uptime Lab’s MinCab Carrier Board","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/uptime-lab-cm4-mincab.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/uptime-lab-cm4-mincab.html"}
diff --git a/boards_cm/uptime-lab-cm4-upberry.html b/boards_cm/uptime-lab-cm4-upberry.html
index 9ef690f8d..0877475ac 100644
--- a/boards_cm/uptime-lab-cm4-upberry.html
+++ b/boards_cm/uptime-lab-cm4-upberry.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The Upberry is a tiny CM4 carrier with only HDMI, USB-C for power and OTG support, and status and activity LEDs. There will be a machined aluminum case that keeps with the trim aesthetic, and it should be able to fit in as a tiny display computer, or something like a Chromecast, if you have a WiFi version of the CM4.","headline":"Uptime Lab’s UpBerry","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/uptime-lab-cm4-upberry.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/uptime-lab-cm4-upberry.html"}
diff --git a/boards_cm/utility-control-unit.html b/boards_cm/utility-control-unit.html
index 0142d3d6f..abcba1ace 100644
--- a/boards_cm/utility-control-unit.html
+++ b/boards_cm/utility-control-unit.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The Utility Control Unit is a DIN-rail mountable 3D-printer/smart home server, developed by @bauke2012 and @H3ndrik-Jan.","headline":"Utility Control Unit","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/utility-control-unit.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/utility-control-unit.html"}
diff --git a/boards_cm/uugear-pigear-nano.html b/boards_cm/uugear-pigear-nano.html
index 1da210d7b..b84030cc1 100644
--- a/boards_cm/uugear-pigear-nano.html
+++ b/boards_cm/uugear-pigear-nano.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"There are three VLI USB 3 hubs on this board. One is a VLI VL805 like is found on the Raspberry Pi 4 model B.","headline":"UUGear PiGear Nano","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/uugear-pigear-nano.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/uugear-pigear-nano.html"}
diff --git a/boards_cm/waveshare-cm4-duino.html b/boards_cm/waveshare-cm4-duino.html
index 963026c4d..80840bf0c 100644
--- a/boards_cm/waveshare-cm4-duino.html
+++ b/boards_cm/waveshare-cm4-duino.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Waveshare’s CM4-Duino is an Arduino compatible base board for the Compute Module 4 with HDMI, USB, and an M.2 M-key slot.","headline":"Waveshare CM4-Duino","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/waveshare-cm4-duino.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/waveshare-cm4-duino.html"}
diff --git a/boards_cm/waveshare-cm4-io-base.html b/boards_cm/waveshare-cm4-io-base.html
index 5a6929768..8c430643a 100644
--- a/boards_cm/waveshare-cm4-io-base.html
+++ b/boards_cm/waveshare-cm4-io-base.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This board has a 1 Gbps Ethernet port and features 2x MIPI-Camera connectors. It also has an M.2 M-key slot capable of using NVMe SSDs or other PCIe peripherals. It has a full size HDMI port, an RTC with battery backup (Version B and C), and a 4-pin fan connector with a fan controller (Version B and C). It also has 2x USB 2.0 ports and a built-in USB 2.0 hub.","headline":"Waveshare CM4 IO Base","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/waveshare-cm4-io-base.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/waveshare-cm4-io-base.html"}
diff --git a/boards_cm/waveshare-cm4-nano.html b/boards_cm/waveshare-cm4-nano.html
index fb69b84c3..da88bc30e 100644
--- a/boards_cm/waveshare-cm4-nano.html
+++ b/boards_cm/waveshare-cm4-nano.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Waveshare recently introduced the CM4 Nano Base Board (B), which sits within the CM4 footprint and offers full GPIO, Ethernet, USB 2.0 Type A, mini HDMI, CSI/DSI, 3.5mm Audio Output, and USB-C input for power.","headline":"Waveshare CM4 Nano Base Board","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/waveshare-cm4-nano.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/waveshare-cm4-nano.html"}
diff --git a/boards_cm/waveshare-cm4-poe-board.html b/boards_cm/waveshare-cm4-poe-board.html
index 95c4c601c..ff10af742 100644
--- a/boards_cm/waveshare-cm4-poe-board.html
+++ b/boards_cm/waveshare-cm4-poe-board.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This board integrates an 802.3af-compliant PoE circuit (5V/2.5A) for powering the board over Ethernet, and includes 4x USB 3.2 Gen1 ports instead of the 2x USB 2.0 ports on the official Raspberry Pi Compute Module 4 IO board.","headline":"Waveshare Compute Module 4 PoE Board","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/waveshare-cm4-poe-board.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/waveshare-cm4-poe-board.html"}
diff --git a/boards_cm/waveshare-dual-gb-ethernet-5g-4g-base-board.html b/boards_cm/waveshare-dual-gb-ethernet-5g-4g-base-board.html
index 9ffe88df2..1b555a91d 100644
--- a/boards_cm/waveshare-dual-gb-ethernet-5g-4g-base-board.html
+++ b/boards_cm/waveshare-dual-gb-ethernet-5g-4g-base-board.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Waveshare has a new Dual Gigabit Ethernet 5G/4G Base Board with dual gigabit Ethernet (2nd port is USB RTL8153 chip), RTC, dual HDMI, USB 3.2 Gen 1, and an M.2 B-key slot.","headline":"Waveshare Dual Gigabit Ethernet 5G/4G Base Board","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/waveshare-dual-gb-ethernet-5g-4g-base-board.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/waveshare-dual-gb-ethernet-5g-4g-base-board.html"}
diff --git a/boards_cm/waveshare-dual-gigabit-ethernet-base-board.html b/boards_cm/waveshare-dual-gigabit-ethernet-base-board.html
index a13f2c7e1..4ac9856a9 100644
--- a/boards_cm/waveshare-dual-gigabit-ethernet-base-board.html
+++ b/boards_cm/waveshare-dual-gigabit-ethernet-base-board.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This IO Board for the Compute Module 4 has a second Gigabit Ethernet port off an internal USB 3.0 bus, using a Realtek chip for the NIC. This is similar to the USB 3.0-based approach Seeed used on their board. With it’s wide array of IO, it could make a nice platform for DIY routers.","headline":"Waveshare’s Dual Gigabit Ethernet Base Board for the CM4","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/waveshare-dual-gigabit-ethernet-base-board.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/waveshare-dual-gigabit-ethernet-base-board.html"}
diff --git a/boards_cm/wiretrustee-sata-4x-nas.html b/boards_cm/wiretrustee-sata-4x-nas.html
index 7d1bdb4e9..7e811f688 100644
--- a/boards_cm/wiretrustee-sata-4x-nas.html
+++ b/boards_cm/wiretrustee-sata-4x-nas.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This 4x SATA NAS board by Wiretrustee has an integrated Marvell 88SE9215 controller on the PCIe bus to interface with up to 4 native SATA ports.","headline":"Wiretrustee 4x SATA NAS Board","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/wiretrustee-sata-4x-nas.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/wiretrustee-sata-4x-nas.html"}
diff --git a/boards_cm/wisgate-connect.html b/boards_cm/wisgate-connect.html
index 4371bc86f..bea8aa556 100644
--- a/boards_cm/wisgate-connect.html
+++ b/boards_cm/wisgate-connect.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"WisGate Connect is an industrial IoT platform from RAKwireless for LoRaWAN and remote sensing. It has 3 mini PCIe slots, an M.2 slot, multiple SIM card slots, a Pi HAT mount, PoE expansion, WisBlock IO expansion, an optional OLED display, multiple power options, and runs RakPiOS, a custom version of Debian built especially for this board.","headline":"WisGate Connect","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/wisgate-connect.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/wisgate-connect.html"}
diff --git a/boards_cm/zega-piboy.html b/boards_cm/zega-piboy.html
index 89e411036..f93451178 100644
--- a/boards_cm/zega-piboy.html
+++ b/boards_cm/zega-piboy.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The Zega PiBoy from John Maddison is an original-Gameboy-style handheld gaming build centered around the CM4.","headline":"Zega PiBoy","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/zega-piboy.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/zega-piboy.html"}
diff --git a/boards_cm/zymbit-secure-compute-node.html b/boards_cm/zymbit-secure-compute-node.html
index a665cbc0f..5e9a8321d 100644
--- a/boards_cm/zymbit-secure-compute-node.html
+++ b/boards_cm/zymbit-secure-compute-node.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The Secure Edge Node - D35 is an extremely secure computing platform built around the Compute Module 4:","headline":"Zybmit Secure Edge Node - D35","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//boards_cm/zymbit-secure-compute-node.html"},"url":"https://pipci.jeffgeerling.com//boards_cm/zymbit-secure-compute-node.html"}
diff --git a/cards_adapter/ashata-pcie-1-to-4-usb3-switch.html b/cards_adapter/ashata-pcie-1-to-4-usb3-switch.html
index d8f74187a..a2f8a5e7e 100644
--- a/cards_adapter/ashata-pcie-1-to-4-usb3-switch.html
+++ b/cards_adapter/ashata-pcie-1-to-4-usb3-switch.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This PCI Express switch uses the ASM1184e PCIe switch, and works well with the Raspberry Pi. As with other PCI Express switches, it requires a separate power supply for 12V power to the board.","headline":"ASHATA PCE4PCE-A01 1 to 4 Port PCIe Switch","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_adapter/ashata-pcie-1-to-4-usb3-switch.html"},"url":"https://pipci.jeffgeerling.com//cards_adapter/ashata-pcie-1-to-4-usb3-switch.html"}
diff --git a/cards_adapter/delock-pcie-to-parallel.html b/cards_adapter/delock-pcie-to-parallel.html
index f3c107f8b..eba724a4b 100644
--- a/cards_adapter/delock-pcie-to-parallel.html
+++ b/cards_adapter/delock-pcie-to-parallel.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"A number of parallel port adapters for PCI Express were tried on the Compute Module 4, but all that were tested required IO BAR space mapping to work correctly, and that legacy feature is not supported on the Pi’s SoC. So far no parallel port adapter has been found to work on the CM4.","headline":"Delock PCI Express Card to 1x Parallel IEEE 1284","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_adapter/delock-pcie-to-parallel.html"},"url":"https://pipci.jeffgeerling.com//cards_adapter/delock-pcie-to-parallel.html"}
diff --git a/cards_adapter/exacq-ti-xio3130-2-port-pcie-switch.html b/cards_adapter/exacq-ti-xio3130-2-port-pcie-switch.html
index fe31aca66..73860f2f9 100644
--- a/cards_adapter/exacq-ti-xio3130-2-port-pcie-switch.html
+++ b/cards_adapter/exacq-ti-xio3130-2-port-pcie-switch.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Follow the GitHub issue for more details about this card’s current testing progress.","headline":"Exacq Technologies TI XIO3130 1 to 2 Port PCIe Switch","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_adapter/exacq-ti-xio3130-2-port-pcie-switch.html"},"url":"https://pipci.jeffgeerling.com//cards_adapter/exacq-ti-xio3130-2-port-pcie-switch.html"}
diff --git a/cards_adapter/hlt-1x-16x-extension-cable.html b/cards_adapter/hlt-1x-16x-extension-cable.html
index 4abf131a9..5c880eb19 100644
--- a/cards_adapter/hlt-1x-16x-extension-cable.html
+++ b/cards_adapter/hlt-1x-16x-extension-cable.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This is about as simple as it gets. I have encountered no issues with this adapter, and it’s helpful when plugging in any 4x, 8x, or 16x card to the 1x slot on the IO Board.","headline":"HLT PCIe 1x to 16x extension cable","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_adapter/hlt-1x-16x-extension-cable.html"},"url":"https://pipci.jeffgeerling.com//cards_adapter/hlt-1x-16x-extension-cable.html"}
diff --git a/cards_adapter/iocrest-si-pex60016-2-port-pcie-switch.html b/cards_adapter/iocrest-si-pex60016-2-port-pcie-switch.html
index 33b31256b..435ab78d5 100644
--- a/cards_adapter/iocrest-si-pex60016-2-port-pcie-switch.html
+++ b/cards_adapter/iocrest-si-pex60016-2-port-pcie-switch.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This card requires external power (and includes a molex to floppy power adapter), but works great on both the Raspberry Pi CM4 and Pi 5 model B.","headline":"I/O Crest SI-PEX60016 1 to 2 Port PCIe Switch","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_adapter/iocrest-si-pex60016-2-port-pcie-switch.html"},"url":"https://pipci.jeffgeerling.com//cards_adapter/iocrest-si-pex60016-2-port-pcie-switch.html"}
diff --git a/cards_adapter/lenovo-ba7902-2-port-firewire-400.html b/cards_adapter/lenovo-ba7902-2-port-firewire-400.html
index f099a52e6..ce3f97853 100644
--- a/cards_adapter/lenovo-ba7902-2-port-firewire-400.html
+++ b/cards_adapter/lenovo-ba7902-2-port-firewire-400.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This firewire card uses the firewire_ohci kernel module:","headline":"I/O Crest SI-PEX60016 1 to 2 Port PCIe Switch","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_adapter/lenovo-ba7902-2-port-firewire-400.html"},"url":"https://pipci.jeffgeerling.com//cards_adapter/lenovo-ba7902-2-port-firewire-400.html"}
diff --git a/cards_adapter/mellanox-connectx-3-pro.html b/cards_adapter/mellanox-connectx-3-pro.html
index b78998651..989922d31 100644
--- a/cards_adapter/mellanox-connectx-3-pro.html
+++ b/cards_adapter/mellanox-connectx-3-pro.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This card requires a kernel recompile to include Mellanox 1/10/40Gbit Ethernet support. Via menuconfig:","headline":"ConnectX-3 Pro Dual port SFP+ Ethernet / MT27520","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_adapter/mellanox-connectx-3-pro.html"},"url":"https://pipci.jeffgeerling.com//cards_adapter/mellanox-connectx-3-pro.html"}
diff --git a/cards_adapter/mikrotik-routerboard-14eu.html b/cards_adapter/mikrotik-routerboard-14eu.html
index a02923ff9..4dbd549f6 100644
--- a/cards_adapter/mikrotik-routerboard-14eu.html
+++ b/cards_adapter/mikrotik-routerboard-14eu.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The MikroTik RouterBOARD 14eU RouterBOARD 14eU is an adapter card for using four miniPCIe wireless cards and 3G miniPCIe cards in a PC with a PCIe slot. This gives you the ability to use our new R11e wireless interfaces in conventional PC computers.","headline":"MikroTik RouterBOARD 14eU","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_adapter/mikrotik-routerboard-14eu.html"},"url":"https://pipci.jeffgeerling.com//cards_adapter/mikrotik-routerboard-14eu.html"}
diff --git a/cards_adapter/pce164p-no3-ver-006-riser.html b/cards_adapter/pce164p-no3-ver-006-riser.html
index 577d26d65..30a5a3d18 100644
--- a/cards_adapter/pce164p-no3-ver-006-riser.html
+++ b/cards_adapter/pce164p-no3-ver-006-riser.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Follow the GitHub issue for more details about this card’s current testing progress.","headline":"Rosewill RCRC-17001 1x to 16x Riser PCE164P-N06 VER 006","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_adapter/pce164p-no3-ver-006-riser.html"},"url":"https://pipci.jeffgeerling.com//cards_adapter/pce164p-no3-ver-006-riser.html"}
diff --git a/cards_adapter/pce164p-no3-ver-888-riser.html b/cards_adapter/pce164p-no3-ver-888-riser.html
index a355697fa..c04ffb35c 100644
--- a/cards_adapter/pce164p-no3-ver-888-riser.html
+++ b/cards_adapter/pce164p-no3-ver-888-riser.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Follow the GitHub issue for more details about this card’s current testing progress.","headline":"Generic PCE164P NO3 VER 888 1x to 16x riser","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_adapter/pce164p-no3-ver-888-riser.html"},"url":"https://pipci.jeffgeerling.com//cards_adapter/pce164p-no3-ver-888-riser.html"}
diff --git a/cards_adapter/pce164p-no6-ver-008s-riser.html b/cards_adapter/pce164p-no6-ver-008s-riser.html
index 1c5679a35..cee8f0a48 100644
--- a/cards_adapter/pce164p-no6-ver-008s-riser.html
+++ b/cards_adapter/pce164p-no6-ver-008s-riser.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Follow the GitHub issue for more details about this card’s current testing progress.","headline":"Generic PCE164P NO3 VER 008S 1x to 16x riser","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_adapter/pce164p-no6-ver-008s-riser.html"},"url":"https://pipci.jeffgeerling.com//cards_adapter/pce164p-no6-ver-008s-riser.html"}
diff --git a/cards_adapter/rdexp-pcie-x1-riser.html b/cards_adapter/rdexp-pcie-x1-riser.html
index 5a16fddad..19f028ba7 100644
--- a/cards_adapter/rdexp-pcie-x1-riser.html
+++ b/cards_adapter/rdexp-pcie-x1-riser.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"I plan to test this out and see how it can make things fit more easily within the footprint of the CM4 IO Board. This Would be really nice for things like USB cards or SATA cards that take up a bit of vertical space.","headline":"RDEXP PCIe x1 90° riser","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_adapter/rdexp-pcie-x1-riser.html"},"url":"https://pipci.jeffgeerling.com//cards_adapter/rdexp-pcie-x1-riser.html"}
diff --git a/cards_adapter/startech-dual-serial-adapter.html b/cards_adapter/startech-dual-serial-adapter.html
index 1ab711c23..d897d7146 100644
--- a/cards_adapter/startech-dual-serial-adapter.html
+++ b/cards_adapter/startech-dual-serial-adapter.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This adapter card from StarTech is a PCI Express serial card that adds two 16C1050 RS232 serial UART channels/ports to a desktop computer or server. The serial card is compliant with PCI Express 1.0a specification, and it’s compatible with 1x, 2x, 4x, 8x and 16x PCI Express slots.","headline":"StarTech 2-Port PCI Express Serial Card with 16C1050 UART","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_adapter/startech-dual-serial-adapter.html"},"url":"https://pipci.jeffgeerling.com//cards_adapter/startech-dual-serial-adapter.html"}
diff --git a/cards_adapter/waveshare-pcie-packet-switch-4p.html b/cards_adapter/waveshare-pcie-packet-switch-4p.html
index 229ed2880..b34077c34 100644
--- a/cards_adapter/waveshare-pcie-packet-switch-4p.html
+++ b/cards_adapter/waveshare-pcie-packet-switch-4p.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"From Waveshare’s website:","headline":"Waveshare PCIe-Packet-Switch-4P","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_adapter/waveshare-pcie-packet-switch-4p.html"},"url":"https://pipci.jeffgeerling.com//cards_adapter/waveshare-pcie-packet-switch-4p.html"}
diff --git a/cards_adapter/zs-zhishang-pcie-x1-to-4-pcie-x16-expansion-riser.html b/cards_adapter/zs-zhishang-pcie-x1-to-4-pcie-x16-expansion-riser.html
index f9fdf171d..14b128f87 100644
--- a/cards_adapter/zs-zhishang-pcie-x1-to-4-pcie-x16-expansion-riser.html
+++ b/cards_adapter/zs-zhishang-pcie-x1-to-4-pcie-x16-expansion-riser.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"It adapts one x1 PCIe port to 4 x16 slots, with an independent molex 4-pin power supply for each port.","headline":"ZS ZHISHANG PCI-E X1 to 4 PCI-E X16 Expansion Riser","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_adapter/zs-zhishang-pcie-x1-to-4-pcie-x16-expansion-riser.html"},"url":"https://pipci.jeffgeerling.com//cards_adapter/zs-zhishang-pcie-x1-to-4-pcie-x16-expansion-riser.html"}
diff --git a/cards_gpu/amd-radeon-hd-7470-1gb.html b/cards_gpu/amd-radeon-hd-7470-1gb.html
index 7adb25def..f162203cd 100644
--- a/cards_gpu/amd-radeon-hd-7470-1gb.html
+++ b/cards_gpu/amd-radeon-hd-7470-1gb.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Dell’s AMD Radeon HD 7470 has 1GB of GDDR5 VRAM, uses the Caicos GPU (“Southern Islands”), and was launched in Jan 2012 (according to TechPowerUp). Power draw is rated at 27W maximum, which could be an issue if driving it direct off the Pi’s PCIe slot without an externally-powered riser.","headline":"AMD Radeon HD 7470 1GB","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_gpu/amd-radeon-hd-7470-1gb.html"},"url":"https://pipci.jeffgeerling.com//cards_gpu/amd-radeon-hd-7470-1gb.html"}
diff --git a/cards_gpu/amd-radeon-pro-wx2100.html b/cards_gpu/amd-radeon-pro-wx2100.html
index c24fcd0cb..c0138ce53 100644
--- a/cards_gpu/amd-radeon-pro-wx2100.html
+++ b/cards_gpu/amd-radeon-pro-wx2100.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The AMD Radeon Pro WX 2100 Graphics is a mid-range professional graphics card.","headline":"AMD Radeon Pro WX 2100 Graphics","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_gpu/amd-radeon-pro-wx2100.html"},"url":"https://pipci.jeffgeerling.com//cards_gpu/amd-radeon-pro-wx2100.html"}
diff --git a/cards_gpu/amd-radeon-rx6700xt-12gb.html b/cards_gpu/amd-radeon-rx6700xt-12gb.html
index 6c5427308..dda89f054 100644
--- a/cards_gpu/amd-radeon-rx6700xt-12gb.html
+++ b/cards_gpu/amd-radeon-rx6700xt-12gb.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The Radeon RX 6700 XT (“Navy Flounder”) was released in 2021 and is supported by the open source amdgpu driver in the Linux Kernel, version 5.11 and later. It is also supported by AMD’s Radeon Software for Linux as of the 20.50 version.","headline":"AMD Radeon RX 6700 XT 12GB PCIe x16","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_gpu/amd-radeon-rx6700xt-12gb.html"},"url":"https://pipci.jeffgeerling.com//cards_gpu/amd-radeon-rx6700xt-12gb.html"}
diff --git a/cards_gpu/amd-radeon-rx7900xtx-24gb.html b/cards_gpu/amd-radeon-rx7900xtx-24gb.html
index 30dda4698..41c0961df 100644
--- a/cards_gpu/amd-radeon-rx7900xtx-24gb.html
+++ b/cards_gpu/amd-radeon-rx7900xtx-24gb.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The Radeon RX 7900 XT (“Navi 31”) was released in 2022 and is supported by the open source amdgpu driver in the Linux Kernel, version 6.0 and later. It is also supported by AMD’s Radeon Software for Linux as of the 22.40 version.","headline":"AMD Radeon RX 7900 XTX 24GB PCIe x16","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_gpu/amd-radeon-rx7900xtx-24gb.html"},"url":"https://pipci.jeffgeerling.com//cards_gpu/amd-radeon-rx7900xtx-24gb.html"}
diff --git a/cards_gpu/asrock-rack-m2-vga.html b/cards_gpu/asrock-rack-m2-vga.html
index a26eda505..b639e36cd 100644
--- a/cards_gpu/asrock-rack-m2-vga.html
+++ b/cards_gpu/asrock-rack-m2-vga.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The M2_VGA is a tiny M.2 form-factor video card that features the SM750 GPU. This GPU doesn’t have a 3D rendering engine, it only has 16 MB of RAM, and it’s meant more for basic graphics like you’d find in a kiosk or an appliance—or as a very simple and power-efficient graphics processor for a server.","headline":"ASRock Rack M2_VGA","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_gpu/asrock-rack-m2-vga.html"},"url":"https://pipci.jeffgeerling.com//cards_gpu/asrock-rack-m2-vga.html"}
diff --git a/cards_gpu/delock-module-minipcie-sm750.html b/cards_gpu/delock-module-minipcie-sm750.html
index 372028df2..61cd82ed8 100644
--- a/cards_gpu/delock-module-minipcie-sm750.html
+++ b/cards_gpu/delock-module-minipcie-sm750.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Similar to the ASRock Rack M2_VGA, this Mini PCIe board uses the SM750 to power multi-display graphics with a fairly limited GPU. But support for the chip is built into the kernel, via an experimental driver.","headline":"Delock Module MiniPCIe SM750 VGA/DVI/HDMI Graphics Card","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_gpu/delock-module-minipcie-sm750.html"},"url":"https://pipci.jeffgeerling.com//cards_gpu/delock-module-minipcie-sm750.html"}
diff --git a/cards_gpu/evga-geforce-gtx-750ti.html b/cards_gpu/evga-geforce-gtx-750ti.html
index 13e357884..2bf5508be 100644
--- a/cards_gpu/evga-geforce-gtx-750ti.html
+++ b/cards_gpu/evga-geforce-gtx-750ti.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The GTX 750 Ti is a slightly older graphics card that is supported by both Nvidia’s proprietary driver and the open source Nouveau driver in the Linux Kernel.","headline":"EVGA Nvidia GeForce GTX 750 Ti","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_gpu/evga-geforce-gtx-750ti.html"},"url":"https://pipci.jeffgeerling.com//cards_gpu/evga-geforce-gtx-750ti.html"}
@@ -66,7 +66,7 @@ EVGA Nvidia GeForce GTX 750 Ti
| None |
- Untested |
+ None |
Yes |
GitHub Issue |
diff --git a/cards_gpu/evga-geforce-rtx-3080ti.html b/cards_gpu/evga-geforce-rtx-3080ti.html
index 8c93fa07b..3bc3c949f 100644
--- a/cards_gpu/evga-geforce-rtx-3080ti.html
+++ b/cards_gpu/evga-geforce-rtx-3080ti.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The RTX 3080 Ti is supported by both Nvidia’s proprietary driver and the open source Nouveau driver in the Linux Kernel.","headline":"EVGA Nvidia GeForce RTX 3080 Ti","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_gpu/evga-geforce-rtx-3080ti.html"},"url":"https://pipci.jeffgeerling.com//cards_gpu/evga-geforce-rtx-3080ti.html"}
diff --git a/cards_gpu/gigabyte-nvidia-rtx-4090.html b/cards_gpu/gigabyte-nvidia-rtx-4090.html
index 4f753ea52..380506588 100644
--- a/cards_gpu/gigabyte-nvidia-rtx-4090.html
+++ b/cards_gpu/gigabyte-nvidia-rtx-4090.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The RTX 4090 is supported by both Nvidia’s proprietary driver and the open source Nouveau driver in the Linux Kernel.","headline":"Gigabyte Nvidia RTX 4090 OC","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_gpu/gigabyte-nvidia-rtx-4090.html"},"url":"https://pipci.jeffgeerling.com//cards_gpu/gigabyte-nvidia-rtx-4090.html"}
diff --git a/cards_gpu/intel-arc-a750.html b/cards_gpu/intel-arc-a750.html
index 7c831e2d2..048d7b67a 100644
--- a/cards_gpu/intel-arc-a750.html
+++ b/cards_gpu/intel-arc-a750.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The Intel Arc A750 Limited Edition is one of Intel’s first consumer standalone graphics cards. The driver support for X86 is… okay at best right now. And for ARM64, nonexistent.","headline":"Intel Arc A750 Limited Edition","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_gpu/intel-arc-a750.html"},"url":"https://pipci.jeffgeerling.com//cards_gpu/intel-arc-a750.html"}
diff --git a/cards_gpu/msi-geforce-gtx-1080.html b/cards_gpu/msi-geforce-gtx-1080.html
index 2c22e712d..069aba04e 100644
--- a/cards_gpu/msi-geforce-gtx-1080.html
+++ b/cards_gpu/msi-geforce-gtx-1080.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The GTX 1080 is supported by both Nvidia’s proprietary driver and the open source Nouveau driver in the Linux Kernel.","headline":"MSI Nvidia GeForce GTX 1080 8G Gamer X","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_gpu/msi-geforce-gtx-1080.html"},"url":"https://pipci.jeffgeerling.com//cards_gpu/msi-geforce-gtx-1080.html"}
diff --git a/cards_gpu/nvidia-quadro-2000.html b/cards_gpu/nvidia-quadro-2000.html
index 31baafedf..8adcf5023 100644
--- a/cards_gpu/nvidia-quadro-2000.html
+++ b/cards_gpu/nvidia-quadro-2000.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This HP version of the Nvidia Quadro 2000 has 1 GB of VRAM and came from one of the streaming PCs in the lab at Bishop DuBourg high school.","headline":"Nvidia Quadro 2000","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_gpu/nvidia-quadro-2000.html"},"url":"https://pipci.jeffgeerling.com//cards_gpu/nvidia-quadro-2000.html"}
diff --git a/cards_gpu/nvidia-quadro-rtx-8000.html b/cards_gpu/nvidia-quadro-rtx-8000.html
index 7de0a446d..8026208ed 100644
--- a/cards_gpu/nvidia-quadro-rtx-8000.html
+++ b/cards_gpu/nvidia-quadro-rtx-8000.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The Quadro RTX 8000 is supported (well, not really on ARM64) by both Nvidia’s proprietary driver and the open source Nouveau driver in the Linux Kernel.","headline":"Nvidia Quadro RTX 8000","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_gpu/nvidia-quadro-rtx-8000.html"},"url":"https://pipci.jeffgeerling.com//cards_gpu/nvidia-quadro-rtx-8000.html"}
diff --git a/cards_gpu/nvidia-rtx-a2000.html b/cards_gpu/nvidia-rtx-a2000.html
index 7520623bc..03129a86d 100644
--- a/cards_gpu/nvidia-rtx-a2000.html
+++ b/cards_gpu/nvidia-rtx-a2000.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The RTX A2000 is supported by both Nvidia’s proprietary driver and the open source Nouveau driver in the Linux Kernel.","headline":"PNY Nvidia RTX A2000 (Quadro)","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_gpu/nvidia-rtx-a2000.html"},"url":"https://pipci.jeffgeerling.com//cards_gpu/nvidia-rtx-a2000.html"}
diff --git a/cards_gpu/sapphire-radeon-rx550-2gb.html b/cards_gpu/sapphire-radeon-rx550-2gb.html
index 42d5b30a3..aa79002ea 100644
--- a/cards_gpu/sapphire-radeon-rx550-2gb.html
+++ b/cards_gpu/sapphire-radeon-rx550-2gb.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The Radeon RX 550 is a slightly older graphics card that is supported by the open source amdgpu driver in the Linux Kernel.","headline":"Sapphire AMD Radeon RX 550 2GB PCIe x16","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_gpu/sapphire-radeon-rx550-2gb.html"},"url":"https://pipci.jeffgeerling.com//cards_gpu/sapphire-radeon-rx550-2gb.html"}
diff --git a/cards_gpu/visiontek-radeon-5450-1gb.html b/cards_gpu/visiontek-radeon-5450-1gb.html
index 7d6aa5b5a..5b466441b 100644
--- a/cards_gpu/visiontek-radeon-5450-1gb.html
+++ b/cards_gpu/visiontek-radeon-5450-1gb.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This graphics card needs a x1 to x16 powered adapter. The radeon driver for this card requires a kernel recompile, and the card is too old to be compatible with the amdgpu drivers.","headline":"VisionTek AMD Radeon 5450 1GB PCIe x16","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_gpu/visiontek-radeon-5450-1gb.html"},"url":"https://pipci.jeffgeerling.com//cards_gpu/visiontek-radeon-5450-1gb.html"}
diff --git a/cards_gpu/xfx-radeon-rx460-4gb.html b/cards_gpu/xfx-radeon-rx460-4gb.html
index 9a8c1482c..a1e4508b2 100644
--- a/cards_gpu/xfx-radeon-rx460-4gb.html
+++ b/cards_gpu/xfx-radeon-rx460-4gb.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The Radeon RX 460 is a slightly older graphics card that is supported by the open source amdgpu driver in the Linux Kernel.","headline":"XFX AMD Radeon RX 460 4GB PCIe x16","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_gpu/xfx-radeon-rx460-4gb.html"},"url":"https://pipci.jeffgeerling.com//cards_gpu/xfx-radeon-rx460-4gb.html"}
diff --git a/cards_gpu/zotac-geforce-gt710-1gb.html b/cards_gpu/zotac-geforce-gt710-1gb.html
index 74b786e47..dbcee7daf 100644
--- a/cards_gpu/zotac-geforce-gt710-1gb.html
+++ b/cards_gpu/zotac-geforce-gt710-1gb.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Needs x1 to x16 powered adapter. Nouveau driver requires compilation. Drivers for ARM: 32-bit, 64-bit. Requires extra BAR space. See linked GitHub issue for more details.","headline":"Zotac Nvidia GeForce GT 710 1GB PCIe x1","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_gpu/zotac-geforce-gt710-1gb.html"},"url":"https://pipci.jeffgeerling.com//cards_gpu/zotac-geforce-gt710-1gb.html"}
diff --git a/cards_m2/alftel-12x-pcie-m2-carrier-board.html b/cards_m2/alftel-12x-pcie-m2-carrier-board.html
index 6731dd95f..502f987f9 100644
--- a/cards_m2/alftel-12x-pcie-m2-carrier-board.html
+++ b/cards_m2/alftel-12x-pcie-m2-carrier-board.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Alftel Systems sent me this card to do some M.2 device testing, especially with different WiFi cards and Google Coral TPUs.","headline":"Alftel 12x PCI Express M.2 Carrier Board","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_m2/alftel-12x-pcie-m2-carrier-board.html"},"url":"https://pipci.jeffgeerling.com//cards_m2/alftel-12x-pcie-m2-carrier-board.html"}
diff --git a/cards_m2/apple-samsung-proprietary-1216-msata.html b/cards_m2/apple-samsung-proprietary-1216-msata.html
index ffeb51020..eecb2c161 100644
--- a/cards_m2/apple-samsung-proprietary-1216-msata.html
+++ b/cards_m2/apple-samsung-proprietary-1216-msata.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"To use Apple’s proprietary SSD on the Pi, you’ll need two adapters:","headline":"Apple Samsung 12+16 Proprietary SSD for Macbook Pro (SM0128G) + Adapter","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_m2/apple-samsung-proprietary-1216-msata.html"},"url":"https://pipci.jeffgeerling.com//cards_m2/apple-samsung-proprietary-1216-msata.html"}
diff --git a/cards_m2/coral-accelerator-ae-key.html b/cards_m2/coral-accelerator-ae-key.html
index a854d3e74..3f4ef9826 100644
--- a/cards_m2/coral-accelerator-ae-key.html
+++ b/cards_m2/coral-accelerator-ae-key.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Coral TPU accelerators offer an easy way to add advanced (and fast!) ML and AI coprocessors to embedded devices. You can use them for things like image recognition, and they are integrated into popular software like Frigate.","headline":"Google Coral TPU M.2 Accelerator A+E Key","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_m2/coral-accelerator-ae-key.html"},"url":"https://pipci.jeffgeerling.com//cards_m2/coral-accelerator-ae-key.html"}
diff --git a/cards_m2/coral-m2-accelerator-dual-edge-tpu.html b/cards_m2/coral-m2-accelerator-dual-edge-tpu.html
index 54b2ecfbd..c5e494fb9 100644
--- a/cards_m2/coral-m2-accelerator-dual-edge-tpu.html
+++ b/cards_m2/coral-m2-accelerator-dual-edge-tpu.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The Coral M.2 Accelerator with Dual Edge TPU uses an interesting feature of M.2 E-key slots—it uses both lanes that are in the spec to the slot (though most board manufacturers only implement one lane per slot).","headline":"Coral M.2 Accelerator with Dual Edge TPU","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_m2/coral-m2-accelerator-dual-edge-tpu.html"},"url":"https://pipci.jeffgeerling.com//cards_m2/coral-m2-accelerator-dual-edge-tpu.html"}
diff --git a/cards_m2/cytron-makerdisk-nvme-2242-m-key-ssd.html b/cards_m2/cytron-makerdisk-nvme-2242-m-key-ssd.html
index e2b4d2624..494667092 100644
--- a/cards_m2/cytron-makerdisk-nvme-2242-m-key-ssd.html
+++ b/cards_m2/cytron-makerdisk-nvme-2242-m-key-ssd.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Cytron sells an NVMe 2242 M-Key MakerDisk SSD in 128, 256, and 512 GB sizes.","headline":"Cytron MakerDisk SSD NVMe 2242 M-key M.2","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_m2/cytron-makerdisk-nvme-2242-m-key-ssd.html"},"url":"https://pipci.jeffgeerling.com//cards_m2/cytron-makerdisk-nvme-2242-m-key-ssd.html"}
diff --git a/cards_m2/hailo-8-ai-module.html b/cards_m2/hailo-8-ai-module.html
index 1e11270b4..3adb5d78a 100644
--- a/cards_m2/hailo-8-ai-module.html
+++ b/cards_m2/hailo-8-ai-module.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The Hailo-8 is an AI accelerator module that is keyed for multiple M.2 pinouts, including M, B+M, and A+E, in sizes ranging from 2230 to 2242, and you can get a model with breakable extensions out to 60 and 80mm deep.","headline":"Hailo-8 M.2 AI Accelerator","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_m2/hailo-8-ai-module.html"},"url":"https://pipci.jeffgeerling.com//cards_m2/hailo-8-ai-module.html"}
diff --git a/cards_m2/hailo-8l-ai-module.html b/cards_m2/hailo-8l-ai-module.html
index 27de55233..4e0b8d760 100644
--- a/cards_m2/hailo-8l-ai-module.html
+++ b/cards_m2/hailo-8l-ai-module.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The Hailo-8L is Hailo’s ‘Entry Level’ AI accelerator, meant for edge and lighter use cases.","headline":"Hailo-8L M.2 AI Accelerator","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_m2/hailo-8l-ai-module.html"},"url":"https://pipci.jeffgeerling.com//cards_m2/hailo-8l-ai-module.html"}
diff --git a/cards_m2/kingspec-m2-nvme-ssd-128gb.html b/cards_m2/kingspec-m2-nvme-ssd-128gb.html
index c0e288978..e1be875b4 100644
--- a/cards_m2/kingspec-m2-nvme-ssd-128gb.html
+++ b/cards_m2/kingspec-m2-nvme-ssd-128gb.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This NVMe SSD works great with the CM4, assuming you have a compatible M.2 B or B+M key slot.","headline":"KingSpec 128GB M.2 2242 NVMe SSD","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_m2/kingspec-m2-nvme-ssd-128gb.html"},"url":"https://pipci.jeffgeerling.com//cards_m2/kingspec-m2-nvme-ssd-128gb.html"}
diff --git a/cards_m2/kingston-sa400-120g-ssd.html b/cards_m2/kingston-sa400-120g-ssd.html
index b1f8a6438..666e05ca4 100644
--- a/cards_m2/kingston-sa400-120g-ssd.html
+++ b/cards_m2/kingston-sa400-120g-ssd.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"I just bought this card and am currently testing it. Please follow the GitHub issue for more details.","headline":"Kingston SA400 120 GB SSD","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_m2/kingston-sa400-120g-ssd.html"},"url":"https://pipci.jeffgeerling.com//cards_m2/kingston-sa400-120g-ssd.html"}
diff --git a/cards_m2/kioxia-bg4-m2-nvme-ssd.html b/cards_m2/kioxia-bg4-m2-nvme-ssd.html
index e74912293..58eb89992 100644
--- a/cards_m2/kioxia-bg4-m2-nvme-ssd.html
+++ b/cards_m2/kioxia-bg4-m2-nvme-ssd.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"KIOXIA’s BG4 M.2 NVMe SSD drive is an inexpensive NVMe SSD commonly used in laptops.","headline":"KIOXIA BG4 M.2 NVMe SSD","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_m2/kioxia-bg4-m2-nvme-ssd.html"},"url":"https://pipci.jeffgeerling.com//cards_m2/kioxia-bg4-m2-nvme-ssd.html"}
diff --git a/cards_m2/kioxia-cm6-nvme.html b/cards_m2/kioxia-cm6-nvme.html
index 6a6d7ebad..5680b8bbe 100644
--- a/cards_m2/kioxia-cm6-nvme.html
+++ b/cards_m2/kioxia-cm6-nvme.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This PCI Express NVMe Gen 4 SSD uses the SFF-TA-1001 protocol (sometimes known as U.3) to connect to enterprise servers.","headline":"KIOXIA CM6 PCIe NVMe SFF-TA-1001 (U.3)","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_m2/kioxia-cm6-nvme.html"},"url":"https://pipci.jeffgeerling.com//cards_m2/kioxia-cm6-nvme.html"}
diff --git a/cards_m2/kioxia-xg6-m2-nvme-ssd.html b/cards_m2/kioxia-xg6-m2-nvme-ssd.html
index d112aa353..e87702827 100644
--- a/cards_m2/kioxia-xg6-m2-nvme-ssd.html
+++ b/cards_m2/kioxia-xg6-m2-nvme-ssd.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"I received four KIOXIA XG6 M.2 NVMe SSD drives for testing in a clustered storage scenario. In individual testing on a couple different boards, the XG6 had no problem working with the CM4.","headline":"KIOXIA XG6 M.2 NVMe SSD","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_m2/kioxia-xg6-m2-nvme-ssd.html"},"url":"https://pipci.jeffgeerling.com//cards_m2/kioxia-xg6-m2-nvme-ssd.html"}
diff --git a/cards_m2/kioxia-xg8-m2-nvme-ssd.html b/cards_m2/kioxia-xg8-m2-nvme-ssd.html
index b5cbec85a..ba64d6e09 100644
--- a/cards_m2/kioxia-xg8-m2-nvme-ssd.html
+++ b/cards_m2/kioxia-xg8-m2-nvme-ssd.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"I received five KIOXIA XG8 M.2 NVMe SSD drives for testing in a clustered storage scenario. In individual testing, the XG8 had no problem working with the Pi 5.","headline":"KIOXIA XG8 M.2 NVMe SSD","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_m2/kioxia-xg8-m2-nvme-ssd.html"},"url":"https://pipci.jeffgeerling.com//cards_m2/kioxia-xg8-m2-nvme-ssd.html"}
diff --git a/cards_m2/mzhou-nvme-m2-ssd-m-key-adapter.html b/cards_m2/mzhou-nvme-m2-ssd-m-key-adapter.html
index 09ae10516..81f2d42cb 100644
--- a/cards_m2/mzhou-nvme-m2-ssd-m-key-adapter.html
+++ b/cards_m2/mzhou-nvme-m2-ssd-m-key-adapter.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"TODO.","headline":"MZHOU NVMe M.2 SSD M Key to PCIe 1x Adapter","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_m2/mzhou-nvme-m2-ssd-m-key-adapter.html"},"url":"https://pipci.jeffgeerling.com//cards_m2/mzhou-nvme-m2-ssd-m-key-adapter.html"}
diff --git a/cards_m2/mzhou-wifi-bt-ngff-to-pcie.html b/cards_m2/mzhou-wifi-bt-ngff-to-pcie.html
index b7b9a8131..10ab2bd45 100644
--- a/cards_m2/mzhou-wifi-bt-ngff-to-pcie.html
+++ b/cards_m2/mzhou-wifi-bt-ngff-to-pcie.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This adapter worked great with the Intel AX200 Desktop Kit.","headline":"MZHOU WiFi/Bluetooth Adapter M.2 NGFF to PCI-E 1x","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_m2/mzhou-wifi-bt-ngff-to-pcie.html"},"url":"https://pipci.jeffgeerling.com//cards_m2/mzhou-wifi-bt-ngff-to-pcie.html"}
diff --git a/cards_m2/ngff-m-key-ssd-adapter.html b/cards_m2/ngff-m-key-ssd-adapter.html
index 579189d6a..687853888 100644
--- a/cards_m2/ngff-m-key-ssd-adapter.html
+++ b/cards_m2/ngff-m-key-ssd-adapter.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"TODO.","headline":"NGFF M.2 M Key SSD to PCIe 1x Adapter","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_m2/ngff-m-key-ssd-adapter.html"},"url":"https://pipci.jeffgeerling.com//cards_m2/ngff-m-key-ssd-adapter.html"}
diff --git a/cards_m2/ngff-m-key-ssd-to-a-e-key-adapter.html b/cards_m2/ngff-m-key-ssd-to-a-e-key-adapter.html
index 5ddd4055d..b4177bbe0 100644
--- a/cards_m2/ngff-m-key-ssd-to-a-e-key-adapter.html
+++ b/cards_m2/ngff-m-key-ssd-to-a-e-key-adapter.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This little adapter allows the installation of standard NVMe SSDs (or any other M-key device) into an A/E-key slot. I used three of these adapters to build the “world’s tiniest NVMe RAID” on my Raspberry Pi Compute module 4, along with a 12-slot M.2 carrier board.","headline":"NGFF NVMe M-key SSD to M.2 Key A/E Adapter","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_m2/ngff-m-key-ssd-to-a-e-key-adapter.html"},"url":"https://pipci.jeffgeerling.com//cards_m2/ngff-m-key-ssd-to-a-e-key-adapter.html"}
diff --git a/cards_m2/pinedrive-2242-nvme-ssd.html b/cards_m2/pinedrive-2242-nvme-ssd.html
index f17555e01..f4328120f 100644
--- a/cards_m2/pinedrive-2242-nvme-ssd.html
+++ b/cards_m2/pinedrive-2242-nvme-ssd.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The Pinedrive NVMe SSD 256GB (2242) costs €45,99 EUR (about $50 USD as of this writing), and is verified to work with the Raspberry Pi 5 (and earlier generations).","headline":"Pinedrive NVMe SSD 256GB (2242)","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_m2/pinedrive-2242-nvme-ssd.html"},"url":"https://pipci.jeffgeerling.com//cards_m2/pinedrive-2242-nvme-ssd.html"}
diff --git a/cards_m2/raspberry-pi-ssd.html b/cards_m2/raspberry-pi-ssd.html
index 0b40ffef3..659728114 100644
--- a/cards_m2/raspberry-pi-ssd.html
+++ b/cards_m2/raspberry-pi-ssd.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The Raspberry Pi SSD is a 2230-size NVMe SSD rated at PCIe Gen 3 speed.","headline":"Raspberry Pi SSD","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_m2/raspberry-pi-ssd.html"},"url":"https://pipci.jeffgeerling.com//cards_m2/raspberry-pi-ssd.html"}
diff --git a/cards_m2/sabrent-rocket-q.html b/cards_m2/sabrent-rocket-q.html
index 3b718603e..7bfbe6b17 100644
--- a/cards_m2/sabrent-rocket-q.html
+++ b/cards_m2/sabrent-rocket-q.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"For my Radxa Taco NAS build video, I tested a Sabrent Rocket Q 8TB NVMe SSD, and it worked a treat.","headline":"Sabrent Rocket Q 8TB M.2 NVMe SSD","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_m2/sabrent-rocket-q.html"},"url":"https://pipci.jeffgeerling.com//cards_m2/sabrent-rocket-q.html"}
diff --git a/cards_m2/samsung-970-evo-plus-nvme.html b/cards_m2/samsung-970-evo-plus-nvme.html
index 44fa77915..82b7ae0b5 100644
--- a/cards_m2/samsung-970-evo-plus-nvme.html
+++ b/cards_m2/samsung-970-evo-plus-nvme.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"I put this drive through its paces using an M.2 to PCI Express adapter card. It runs fast—double the random IO performance when connected to the same Pi via a USB 3.0 adapter!","headline":"Samsung 970 EVO Plus 250 GB NVMe SSD","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_m2/samsung-970-evo-plus-nvme.html"},"url":"https://pipci.jeffgeerling.com//cards_m2/samsung-970-evo-plus-nvme.html"}
diff --git a/cards_m2/samsung-980-nvme.html b/cards_m2/samsung-980-nvme.html
index 0ebc2b54f..666af84f9 100644
--- a/cards_m2/samsung-980-nvme.html
+++ b/cards_m2/samsung-980-nvme.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"I evaluted the usage of this drive through a mini PCIe to M.2 adapter card on the Turing Pi v2 with a CM4 Lite 4GiB model.","headline":"Samsung 980 SSD 500 GB NVMe SSD","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_m2/samsung-980-nvme.html"},"url":"https://pipci.jeffgeerling.com//cards_m2/samsung-980-nvme.html"}
diff --git a/cards_m2/sintech-mpcie-m2-adapter.html b/cards_m2/sintech-mpcie-m2-adapter.html
index a24ed90cb..127e594a7 100644
--- a/cards_m2/sintech-mpcie-m2-adapter.html
+++ b/cards_m2/sintech-mpcie-m2-adapter.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"I purchased this card to validate NVMe drive functionality of the mPCIe ports for slots/nodes 1 and 2 on the pre-release Turing Pi v2.","headline":"Sintech M.2 (NGFF) NVMe SSD to Mini PCIe Adapter (with 20cm Cable)","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_m2/sintech-mpcie-m2-adapter.html"},"url":"https://pipci.jeffgeerling.com//cards_m2/sintech-mpcie-m2-adapter.html"}
diff --git a/cards_m2/wd-black-sn750.html b/cards_m2/wd-black-sn750.html
index a2aa517da..94aa7c0bf 100644
--- a/cards_m2/wd-black-sn750.html
+++ b/cards_m2/wd-black-sn750.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"As long as you can physically connect this NVMe SSD to your Pi (e.g. with a PCIe to NVMe adapter), it should work fine with Pi OS.","headline":"WD_Black 500GB SN750 NVMe SSD","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_m2/wd-black-sn750.html"},"url":"https://pipci.jeffgeerling.com//cards_m2/wd-black-sn750.html"}
diff --git a/cards_m2/wd-pc-sn520-2230-nvme-ssd.html b/cards_m2/wd-pc-sn520-2230-nvme-ssd.html
index 4e414b2d1..99af4db8e 100644
--- a/cards_m2/wd-pc-sn520-2230-nvme-ssd.html
+++ b/cards_m2/wd-pc-sn520-2230-nvme-ssd.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This NVMe SSD works great with the CM4, assuming you have a compatible M.2 B or B+M key slot.","headline":"WD PC SN520 NVMe M.2 2230 SSD","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_m2/wd-pc-sn520-2230-nvme-ssd.html"},"url":"https://pipci.jeffgeerling.com//cards_m2/wd-pc-sn520-2230-nvme-ssd.html"}
diff --git a/cards_m2/xiwai-ngff-m-key-m2-ssd-adapter.html b/cards_m2/xiwai-ngff-m-key-m2-ssd-adapter.html
index 589852b36..6a2b24e48 100644
--- a/cards_m2/xiwai-ngff-m-key-m2-ssd-adapter.html
+++ b/cards_m2/xiwai-ngff-m-key-m2-ssd-adapter.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"TODO.","headline":"Xiwai NGFF M Key M.2 SSD to PCIe 1x Adapter","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_m2/xiwai-ngff-m-key-m2-ssd-adapter.html"},"url":"https://pipci.jeffgeerling.com//cards_m2/xiwai-ngff-m-key-m2-ssd-adapter.html"}
diff --git a/cards_m2/xpg-sx6000-lite-128gb.html b/cards_m2/xpg-sx6000-lite-128gb.html
index 7ca5038e5..d2c05d23f 100644
--- a/cards_m2/xpg-sx6000-lite-128gb.html
+++ b/cards_m2/xpg-sx6000-lite-128gb.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"So far I am unable to get this drive to be recognized by the Pi if using it with a standard M.2 to PCI Express adapter.","headline":"XPG SX6000 Lite 120GB SSD","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_m2/xpg-sx6000-lite-128gb.html"},"url":"https://pipci.jeffgeerling.com//cards_m2/xpg-sx6000-lite-128gb.html"}
diff --git a/cards_multimedia/creative-SB1040.html b/cards_multimedia/creative-SB1040.html
index 05c811c22..6110dee77 100644
--- a/cards_multimedia/creative-SB1040.html
+++ b/cards_multimedia/creative-SB1040.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"To get this sound card working with Pi OS, the following overlay needs to be added to the /boot/config.txt file:","headline":"Creative SB1040 Sound Blaster X-Fi Xtreme Audio Card","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_multimedia/creative-SB1040.html"},"url":"https://pipci.jeffgeerling.com//cards_multimedia/creative-SB1040.html"}
diff --git a/cards_multimedia/xtrx-pcie-sdr.html b/cards_multimedia/xtrx-pcie-sdr.html
index 437d31b60..3f0fa1453 100644
--- a/cards_multimedia/xtrx-pcie-sdr.html
+++ b/cards_multimedia/xtrx-pcie-sdr.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The XTRX PCIe SDR is a designed for embedded SDR projects.","headline":"XTRX PCIe Software Defined Radio","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_multimedia/xtrx-pcie-sdr.html"},"url":"https://pipci.jeffgeerling.com//cards_multimedia/xtrx-pcie-sdr.html"}
diff --git a/cards_network/9ntel-82599es.html b/cards_network/9ntel-82599es.html
index e0daabed9..491984d8c 100644
--- a/cards_network/9ntel-82599es.html
+++ b/cards_network/9ntel-82599es.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Currently testing. For more details, see the GitHub issue.","headline":"Intel 82599ES 10 Gigabit Ethernet Controller","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_network/9ntel-82599es.html"},"url":"https://pipci.jeffgeerling.com//cards_network/9ntel-82599es.html"}
diff --git a/cards_network/alfa-network-wifi-halow-ahm27292u.html b/cards_network/alfa-network-wifi-halow-ahm27292u.html
index a370cf4a7..5ec3a5e3e 100644
--- a/cards_network/alfa-network-wifi-halow-ahm27292u.html
+++ b/cards_network/alfa-network-wifi-halow-ahm27292u.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The AHM27292U card is an IEEE 802.11ah sub 1 GHz standalone M.2/NGFF B-key 3042 type Linux module.","headline":"ALFA Network’s WiFi HaLow AHM27292U","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_network/alfa-network-wifi-halow-ahm27292u.html"},"url":"https://pipci.jeffgeerling.com//cards_network/alfa-network-wifi-halow-ahm27292u.html"}
diff --git a/cards_network/asus-pce-ac51-wifi-5.html b/cards_network/asus-pce-ac51-wifi-5.html
index f38f7c25b..d76201508 100644
--- a/cards_network/asus-pce-ac51-wifi-5.html
+++ b/cards_network/asus-pce-ac51-wifi-5.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This WiFi card supports 802.11ac, and has drivers available for Linux and Windows, at least, but I have had trouble getting these drivers running (or even installable) on the Pi.","headline":"ASUS PCE-AC51 802.11ac WiFi Adapter","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_network/asus-pce-ac51-wifi-5.html"},"url":"https://pipci.jeffgeerling.com//cards_network/asus-pce-ac51-wifi-5.html"}
diff --git a/cards_network/asus-xg-c100c-10g.html b/cards_network/asus-xg-c100c-10g.html
index 34104ee29..8b7abbb8d 100644
--- a/cards_network/asus-xg-c100c-10g.html
+++ b/cards_network/asus-xg-c100c-10g.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This 10 Gigabit network card has an Aquantia AQC107 802.3bz NBase-T ethernet controller, which requires the AQtion driver.","headline":"ASUS XG-C100C 10G Network Adapter","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_network/asus-xg-c100c-10g.html"},"url":"https://pipci.jeffgeerling.com//cards_network/asus-xg-c100c-10g.html"}
diff --git a/cards_network/broadcom-bcm94360ng.html b/cards_network/broadcom-bcm94360ng.html
index 55a2abf64..327ecfb47 100644
--- a/cards_network/broadcom-bcm94360ng.html
+++ b/cards_network/broadcom-bcm94360ng.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Currently testing. See more details in the linked GitHub issue.","headline":"Broadcom BCM94360NG 802.11ac WiFi M.2 Adapter","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_network/broadcom-bcm94360ng.html"},"url":"https://pipci.jeffgeerling.com//cards_network/broadcom-bcm94360ng.html"}
diff --git a/cards_network/compex-wle200nx.html b/cards_network/compex-wle200nx.html
index ad03f3cd8..298d78bc6 100644
--- a/cards_network/compex-wle200nx.html
+++ b/cards_network/compex-wle200nx.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Alftel just shipped me a Seaberry board to test, and it came with a few PCI Express devices pre-installed.","headline":"Compex WLE200NX 802.11n 2x2 mini PCIe WiFi card","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_network/compex-wle200nx.html"},"url":"https://pipci.jeffgeerling.com//cards_network/compex-wle200nx.html"}
diff --git a/cards_network/dell-intel-942v6-x520-da2-10gb-sfp-dual-nic.html b/cards_network/dell-intel-942v6-x520-da2-10gb-sfp-dual-nic.html
index 2d9f69bfc..eb9abaa8b 100644
--- a/cards_network/dell-intel-942v6-x520-da2-10gb-sfp-dual-nic.html
+++ b/cards_network/dell-intel-942v6-x520-da2-10gb-sfp-dual-nic.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"I just started testing this card. Please follow the linked GitHub issue for the latest updates.","headline":"Dell Intel 942V6 X520-DA2 dual 10 Gbps SFP+ NIC","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_network/dell-intel-942v6-x520-da2-10gb-sfp-dual-nic.html"},"url":"https://pipci.jeffgeerling.com//cards_network/dell-intel-942v6-x520-da2-10gb-sfp-dual-nic.html"}
diff --git a/cards_network/edup-intel-ax200-wifi-6.html b/cards_network/edup-intel-ax200-wifi-6.html
index a0d0606b7..b9f5be024 100644
--- a/cards_network/edup-intel-ax200-wifi-6.html
+++ b/cards_network/edup-intel-ax200-wifi-6.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Requires driver patch and Intel firmware install. See more details in the linked GitHub issue.","headline":"EDUP PCIe Intel AX200 WiFi 6 Adapter","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_network/edup-intel-ax200-wifi-6.html"},"url":"https://pipci.jeffgeerling.com//cards_network/edup-intel-ax200-wifi-6.html"}
diff --git a/cards_network/innodisk-egpl-t101.html b/cards_network/innodisk-egpl-t101.html
index 6885516b5..561e3f367 100644
--- a/cards_network/innodisk-egpl-t101.html
+++ b/cards_network/innodisk-egpl-t101.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The Innodisk EGPL-T101 is a 10 GbE M.2 adapter in a tiny form factor. It has an Aquantia chip inside, and should be well supported under Linux. See GitHub issue for more information and updates on testing.","headline":"Innodisk EGPL-T101","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_network/innodisk-egpl-t101.html"},"url":"https://pipci.jeffgeerling.com//cards_network/innodisk-egpl-t101.html"}
diff --git a/cards_network/intel-8260ngw.html b/cards_network/intel-8260ngw.html
index f7a41ff65..21a168df8 100644
--- a/cards_network/intel-8260ngw.html
+++ b/cards_network/intel-8260ngw.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Currently testing. See more details in the linked GitHub issue.","headline":"Intel 8260NGW 802.11ac WiFi M.2 Adapter","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_network/intel-8260ngw.html"},"url":"https://pipci.jeffgeerling.com//cards_network/intel-8260ngw.html"}
diff --git a/cards_network/intel-ax210-wifi-6e.html b/cards_network/intel-ax210-wifi-6e.html
index 35d8787bf..a63d889d6 100644
--- a/cards_network/intel-ax210-wifi-6e.html
+++ b/cards_network/intel-ax210-wifi-6e.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"To get this card working on the Pi, you need to compile a custom kernel with the following kernel configuration option added:","headline":"Intel AX210NGW WiFi 6E 802.11ax M.2","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_network/intel-ax210-wifi-6e.html"},"url":"https://pipci.jeffgeerling.com//cards_network/intel-ax210-wifi-6e.html"}
diff --git a/cards_network/intel-i210-nic.html b/cards_network/intel-i210-nic.html
index 66a54eef4..de3328c17 100644
--- a/cards_network/intel-i210-nic.html
+++ b/cards_network/intel-i210-nic.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"In tandem with my work on the Time Card (see #199), I noticed @lasselj had tested the Intel I210 on a Raspberry Pi and it seems to be working.","headline":"Intel I210-T1 Network Adapter","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_network/intel-i210-nic.html"},"url":"https://pipci.jeffgeerling.com//cards_network/intel-i210-nic.html"}
diff --git a/cards_network/intel-i340-t4-4-port-1g.html b/cards_network/intel-i340-t4-4-port-1g.html
index f485bf868..14e57f628 100644
--- a/cards_network/intel-i340-t4-4-port-1g.html
+++ b/cards_network/intel-i340-t4-4-port-1g.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Requires installation of Intel Linux base driver. PCIe lane limits to ~3.2 Gbps total bandwidth. See more details in the linked GitHub issue.","headline":"Intel I340-T4 PCIe x4 4-port Gigabit Network Adapter","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_network/intel-i340-t4-4-port-1g.html"},"url":"https://pipci.jeffgeerling.com//cards_network/intel-i340-t4-4-port-1g.html"}
diff --git a/cards_network/jetway-jadmpedila-mini-pcie-lan.html b/cards_network/jetway-jadmpedila-mini-pcie-lan.html
index fb120135e..58aea6892 100644
--- a/cards_network/jetway-jadmpedila-mini-pcie-lan.html
+++ b/cards_network/jetway-jadmpedila-mini-pcie-lan.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Alftel shipped me this card with their Seaberry board.","headline":"Jetway JADMPEIDLA dual-gigabit Mini PCIe LAN card with Intel i350","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_network/jetway-jadmpedila-mini-pcie-lan.html"},"url":"https://pipci.jeffgeerling.com//cards_network/jetway-jadmpedila-mini-pcie-lan.html"}
diff --git a/cards_network/killer1535.html b/cards_network/killer1535.html
index 2ee9816bf..2da94e63c 100644
--- a/cards_network/killer1535.html
+++ b/cards_network/killer1535.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Currently testing. See more details in the linked GitHub issue.","headline":"Killer1535 802.11ac NGFF WiFi M.2 Adapter","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_network/killer1535.html"},"url":"https://pipci.jeffgeerling.com//cards_network/killer1535.html"}
diff --git a/cards_network/mellanox-connectx-2-mnpa19-xtr-sfp-10g.html b/cards_network/mellanox-connectx-2-mnpa19-xtr-sfp-10g.html
index 44200e9a7..4d66f6d97 100644
--- a/cards_network/mellanox-connectx-2-mnpa19-xtr-sfp-10g.html
+++ b/cards_network/mellanox-connectx-2-mnpa19-xtr-sfp-10g.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Testing this card requires the Mellanox Ethernet driver to be compiled into the Pi OS kernel. Since it is not by default, you need to recompile the kernel with the following option enabled through menuconfig:","headline":"Mellanox ConnectX-2 MNPA19-XTR SFP+ 10G Ethernet Adapter","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_network/mellanox-connectx-2-mnpa19-xtr-sfp-10g.html"},"url":"https://pipci.jeffgeerling.com//cards_network/mellanox-connectx-2-mnpa19-xtr-sfp-10g.html"}
diff --git a/cards_network/mellanox-connectx-3-EN-CX311A-sfp-10g.html b/cards_network/mellanox-connectx-3-EN-CX311A-sfp-10g.html
index 507b31e3b..3b802c04b 100644
--- a/cards_network/mellanox-connectx-3-EN-CX311A-sfp-10g.html
+++ b/cards_network/mellanox-connectx-3-EN-CX311A-sfp-10g.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Testing this card requires the Mellanox Ethernet driver to be compiled into the Pi OS kernel. Since it is not by default, you need to recompile the kernel with the following option enabled through menuconfig:","headline":"Mellanox ConnectX-3 EN CX311A SFP+ 10G Ethernet Adapter","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_network/mellanox-connectx-3-EN-CX311A-sfp-10g.html"},"url":"https://pipci.jeffgeerling.com//cards_network/mellanox-connectx-3-EN-CX311A-sfp-10g.html"}
diff --git a/cards_network/mikrotik-ccr2004-1g-2xs-pcie.html b/cards_network/mikrotik-ccr2004-1g-2xs-pcie.html
index 7054738df..060dc53b2 100644
--- a/cards_network/mikrotik-ccr2004-1g-2xs-pcie.html
+++ b/cards_network/mikrotik-ccr2004-1g-2xs-pcie.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The MikroTik CCR2004-1G-2XS-PCIe is a SmartNIC/Router-NIC/poor man’s DPU equipped with:","headline":"MikroTik CCR2004-1G-2XS-PCIe","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_network/mikrotik-ccr2004-1g-2xs-pcie.html"},"url":"https://pipci.jeffgeerling.com//cards_network/mikrotik-ccr2004-1g-2xs-pcie.html"}
diff --git a/cards_network/quectel-lte-ec25-a.html b/cards_network/quectel-lte-ec25-a.html
index c3ea73b65..e0e8db7ba 100644
--- a/cards_network/quectel-lte-ec25-a.html
+++ b/cards_network/quectel-lte-ec25-a.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"From the spec sheet:","headline":"Quectel EC25-A LTE Cat 4 Mini PCIe Module","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_network/quectel-lte-ec25-a.html"},"url":"https://pipci.jeffgeerling.com//cards_network/quectel-lte-ec25-a.html"}
diff --git a/cards_network/realtek-rtl8821ce.html b/cards_network/realtek-rtl8821ce.html
index fda366d6d..68b727913 100644
--- a/cards_network/realtek-rtl8821ce.html
+++ b/cards_network/realtek-rtl8821ce.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"I pulled an 915620-001 Wireless card out of my HP Slim S01 desktop when I upgraded it to Intel’s AX200 WiFi 6 card. It uses Realtek’s RTL8821CE chipset, and supports 802.11ac and Bluetooth 4.2. It only has one antenna connection. Check the GitHub issue for more information and future updates.","headline":"Realtek RL8821CE","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_network/realtek-rtl8821ce.html"},"url":"https://pipci.jeffgeerling.com//cards_network/realtek-rtl8821ce.html"}
diff --git a/cards_network/rosewill-rc20001-25gbe.html b/cards_network/rosewill-rc20001-25gbe.html
index 23c79ebbe..13da8677f 100644
--- a/cards_network/rosewill-rc20001-25gbe.html
+++ b/cards_network/rosewill-rc20001-25gbe.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This adapter works great with the Pi in the built-in 1x PCIe slot on the IO Board. I tried installing the Realtek drivers from their website but had difficulty compiling them.","headline":"Rosewill RC-20001 2.5GBASE-T PCIe x1 Network Adapter","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_network/rosewill-rc20001-25gbe.html"},"url":"https://pipci.jeffgeerling.com//cards_network/rosewill-rc20001-25gbe.html"}
diff --git a/cards_network/sierra-wireless-em7345.html b/cards_network/sierra-wireless-em7345.html
index 37b68f39e..35f9856cc 100644
--- a/cards_network/sierra-wireless-em7345.html
+++ b/cards_network/sierra-wireless-em7345.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Currently testing. See more details in the GitHub issue.","headline":"Sierra Wireless EM7345","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_network/sierra-wireless-em7345.html"},"url":"https://pipci.jeffgeerling.com//cards_network/sierra-wireless-em7345.html"}
diff --git a/cards_network/sierra-wireless-em7565.html b/cards_network/sierra-wireless-em7565.html
index cf52484bc..458ba96bf 100644
--- a/cards_network/sierra-wireless-em7565.html
+++ b/cards_network/sierra-wireless-em7565.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The modem is a Cat-12 4G modem in the M.2 form factor (not like the mini PCIe modems I’m used to), and supposedly delivers up to 600 Mbps down, 150 Mbps up. It has GNSS and seems to be popular in more high-end industrial devices.","headline":"Sierra Wireless EM7565 4G LTE NGFF modem","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_network/sierra-wireless-em7565.html"},"url":"https://pipci.jeffgeerling.com//cards_network/sierra-wireless-em7565.html"}
diff --git a/cards_network/simcom-sim8200ea.html b/cards_network/simcom-sim8200ea.html
index bd547aac9..a7fd9c6bd 100644
--- a/cards_network/simcom-sim8200ea.html
+++ b/cards_network/simcom-sim8200ea.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"From @shayne on GitHub:","headline":"SimCom SIM8200EA-M2","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_network/simcom-sim8200ea.html"},"url":"https://pipci.jeffgeerling.com//cards_network/simcom-sim8200ea.html"}
diff --git a/cards_network/syba-dual-25gbe-pcie-nic.html b/cards_network/syba-dual-25gbe-pcie-nic.html
index d7f6fc467..35b76db1c 100644
--- a/cards_network/syba-dual-25gbe-pcie-nic.html
+++ b/cards_network/syba-dual-25gbe-pcie-nic.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This card uses the same Realtek 8125 chip that’s in the Rosewill RC20001 2.5 Gbps card I tested, but the difference is it has two of them!","headline":"Syba Dual 2.5 Gigabit Ethernet PCIe NIC SD-PEX24066","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_network/syba-dual-25gbe-pcie-nic.html"},"url":"https://pipci.jeffgeerling.com//cards_network/syba-dual-25gbe-pcie-nic.html"}
diff --git a/cards_other/digium-te420.html b/cards_other/digium-te420.html
index 0278faf8c..dd69d13d9 100644
--- a/cards_other/digium-te420.html
+++ b/cards_other/digium-te420.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The Digium TE420 card was designed for use with Asterisk, Switchvox, and FreePBX; providing up to 120 channels of voice and data, the Digium TE420 card has four standard RJ-45 ports. The Digium TE420 can provide four T1, E1, or J1 interfaces and support 96 T1/J1 or 120 E1 connections.","headline":"Digium, Inc. Wildcard TE420 quad-span T1/E1/J1 card 3.3V (PCI-Express) (5th gen)","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_other/digium-te420.html"},"url":"https://pipci.jeffgeerling.com//cards_other/digium-te420.html"}
diff --git a/cards_other/maxlinear-evaluation.html b/cards_other/maxlinear-evaluation.html
index 629959853..4a962812e 100644
--- a/cards_other/maxlinear-evaluation.html
+++ b/cards_other/maxlinear-evaluation.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"From MaxLinear’s documentation:","headline":"MaxLinear XR17V358/SP339-0A-EB","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_other/maxlinear-evaluation.html"},"url":"https://pipci.jeffgeerling.com//cards_other/maxlinear-evaluation.html"}
diff --git a/cards_other/open-hat-pcie.html b/cards_other/open-hat-pcie.html
index 64259af60..3589aa5d0 100644
--- a/cards_other/open-hat-pcie.html
+++ b/cards_other/open-hat-pcie.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"I have too many Raspberry Pi hats. Occasionally, I wish to debug them on an x86 computer, which gave birth to the idea of creating an adapter board. Thus, the open HAT-PCIe was born.","headline":"open HAT-PCIe covert board","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_other/open-hat-pcie.html"},"url":"https://pipci.jeffgeerling.com//cards_other/open-hat-pcie.html"}
diff --git a/cards_other/sangoma-a10x.html b/cards_other/sangoma-a10x.html
index 858e9a945..545329d0c 100644
--- a/cards_other/sangoma-a10x.html
+++ b/cards_other/sangoma-a10x.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Sangoma is the market leader in supporting reliable SD-WAN failover solutions for large retail organizations over a T1 / E1 internet connection. Sangoma’s world-class A-series T1 / E1 data cards have been dominating the market sector since 1984, being installed into appliances of large vendors and OEMs, supporting some of the largest Point-of-Sale (POS) T1 WAN failover solutions and data applications.","headline":"Sangoma Technologies Corp. A10x T1/E1 AFT cards","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_other/sangoma-a10x.html"},"url":"https://pipci.jeffgeerling.com//cards_other/sangoma-a10x.html"}
diff --git a/cards_other/time-card.html b/cards_other/time-card.html
index 877e7fc75..8070cab39 100644
--- a/cards_other/time-card.html
+++ b/cards_other/time-card.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Time Card is the heart of the Open Time Server project. It is an entirely open source board design that can be used with the OCP PTP driver in the Linux kernel to run a computer as a grandmaster clock source with hardware timestamping.","headline":"Time Card - Open Compute Project","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_other/time-card.html"},"url":"https://pipci.jeffgeerling.com//cards_other/time-card.html"}
diff --git a/cards_other/vantec-ugt-fw210.html b/cards_other/vantec-ugt-fw210.html
index 83b1eb5a8..db5c1a58f 100644
--- a/cards_other/vantec-ugt-fw210.html
+++ b/cards_other/vantec-ugt-fw210.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The Vantec 2+1 FireWire 800/400 PCIe Combo Host Card adds two FireWire 800 ports and one FireWire 400 port (6-pin).","headline":"Vantec 2+1 FireWire 800/400 PCIe Combo Host Card (UGT-FW210)","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_other/vantec-ugt-fw210.html"},"url":"https://pipci.jeffgeerling.com//cards_other/vantec-ugt-fw210.html"}
diff --git a/cards_other/via-firewire-iim-vt6307l.html b/cards_other/via-firewire-iim-vt6307l.html
index bef5550c1..ae24aaba2 100644
--- a/cards_other/via-firewire-iim-vt6307l.html
+++ b/cards_other/via-firewire-iim-vt6307l.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"GitHub user @WACOMalt was able to get a Generic VT6307L / ASM1083 2+1 IEEE 1394 FireWire PCIe card working on the Compute Module 4.","headline":"VIA FireWire IIM VT6307L host controller","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_other/via-firewire-iim-vt6307l.html"},"url":"https://pipci.jeffgeerling.com//cards_other/via-firewire-iim-vt6307l.html"}
diff --git a/cards_storage/adaptec-asr-6405e-2270800-r-raid.html b/cards_storage/adaptec-asr-6405e-2270800-r-raid.html
index 8e8e06349..44270d0c3 100644
--- a/cards_storage/adaptec-asr-6405e-2270800-r-raid.html
+++ b/cards_storage/adaptec-asr-6405e-2270800-r-raid.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"I have just received this card, and will be testing it soon. Please follow the linked GitHub issue for more details.","headline":"Adaptec ASR-6405E 2270800-R RAID Storage Controller","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_storage/adaptec-asr-6405e-2270800-r-raid.html"},"url":"https://pipci.jeffgeerling.com//cards_storage/adaptec-asr-6405e-2270800-r-raid.html"}
diff --git a/cards_storage/asm1061-2-port-adapter.html b/cards_storage/asm1061-2-port-adapter.html
index 47fea358f..643500b3e 100644
--- a/cards_storage/asm1061-2-port-adapter.html
+++ b/cards_storage/asm1061-2-port-adapter.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Check the GitHub issue to follow testing progress.","headline":"4-port (2-active) ASM1061 SATA adapter","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_storage/asm1061-2-port-adapter.html"},"url":"https://pipci.jeffgeerling.com//cards_storage/asm1061-2-port-adapter.html"}
diff --git a/cards_storage/broadcom-megaraid-9405w-16i.html b/cards_storage/broadcom-megaraid-9405w-16i.html
index 4f502a7e3..7cabd89dc 100644
--- a/cards_storage/broadcom-megaraid-9405w-16i.html
+++ b/cards_storage/broadcom-megaraid-9405w-16i.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This card is similar to the 9460-16i, and is new enough to be supported on ARM platforms by the in-tree mpt3sas driver.","headline":"Broadcom MegaRAID 9405W-16i storage controller (LSI)","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_storage/broadcom-megaraid-9405w-16i.html"},"url":"https://pipci.jeffgeerling.com//cards_storage/broadcom-megaraid-9405w-16i.html"}
diff --git a/cards_storage/broadcom-megaraid-9440-8i.html b/cards_storage/broadcom-megaraid-9440-8i.html
index 79ee06f88..bbd11ab4d 100644
--- a/cards_storage/broadcom-megaraid-9440-8i.html
+++ b/cards_storage/broadcom-megaraid-9440-8i.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This card is similar to the 9460-16i, and is new enough to be supported on ARM platforms by the in-tree mpt3sas driver.","headline":"Broadcom MegaRAID 9440-8i storage adapter (LSI)","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_storage/broadcom-megaraid-9440-8i.html"},"url":"https://pipci.jeffgeerling.com//cards_storage/broadcom-megaraid-9440-8i.html"}
diff --git a/cards_storage/broadcom-megaraid-9460-16i.html b/cards_storage/broadcom-megaraid-9460-16i.html
index 7e2b4e794..8c331e847 100644
--- a/cards_storage/broadcom-megaraid-9460-16i.html
+++ b/cards_storage/broadcom-megaraid-9460-16i.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This card currently requires a few minor driver modifications to work on both 32-bit and 64-bit ARM on Raspberry Pi OS. The 64-bit version also hits a bug in the Pi 64-bit kernel: writeq() on 64-bit OS does not issue PCIe cycle, switching to two writel() works.","headline":"Broadcom MegaRAID 9460-16i storage controller","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_storage/broadcom-megaraid-9460-16i.html"},"url":"https://pipci.jeffgeerling.com//cards_storage/broadcom-megaraid-9460-16i.html"}
diff --git a/cards_storage/ibm-servraid-br10i-lsi-sas3082e-r-sas-raid.html b/cards_storage/ibm-servraid-br10i-lsi-sas3082e-r-sas-raid.html
index 88a9e5474..b2361ff2c 100644
--- a/cards_storage/ibm-servraid-br10i-lsi-sas3082e-r-sas-raid.html
+++ b/cards_storage/ibm-servraid-br10i-lsi-sas3082e-r-sas-raid.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Having trouble initializing. Might work if flashed to ‘IT mode’ as a generic SATA HBA. See linked GitHub issue for more details.","headline":"IBM ServeRAID BR10i / LSI SAS3082E-R SAS RAID controller","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_storage/ibm-servraid-br10i-lsi-sas3082e-r-sas-raid.html"},"url":"https://pipci.jeffgeerling.com//cards_storage/ibm-servraid-br10i-lsi-sas3082e-r-sas-raid.html"}
diff --git a/cards_storage/intel-SASUC8I-LSI-SAS3081E-R-raid.html b/cards_storage/intel-SASUC8I-LSI-SAS3081E-R-raid.html
index d9f86a8fd..ba7680171 100644
--- a/cards_storage/intel-SASUC8I-LSI-SAS3081E-R-raid.html
+++ b/cards_storage/intel-SASUC8I-LSI-SAS3081E-R-raid.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"I have not yet tested this card, though it is already flashed into IT mode, so there’s a chance it will work on the Pi.","headline":"Intel SASUC8I / LSI SAS3081E-R LSI 1068e RAID controller","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_storage/intel-SASUC8I-LSI-SAS3081E-R-raid.html"},"url":"https://pipci.jeffgeerling.com//cards_storage/intel-SASUC8I-LSI-SAS3081E-R-raid.html"}
diff --git a/cards_storage/iocrest-jmb585-m2-sata.html b/cards_storage/iocrest-jmb585-m2-sata.html
index b9256c02f..709e478b5 100644
--- a/cards_storage/iocrest-jmb585-m2-sata.html
+++ b/cards_storage/iocrest-jmb585-m2-sata.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This little SATA board is a convenient and compact way to add up to 5 SATA drives to a Raspberry Pi, either via a CM4 carrier board that has a built-in full-size (80mm) M.2 slot, or via a PCI Express x1 to M.2 adapter card.","headline":"IOCrest M.2 to 5 Ports SATA with JMB585","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_storage/iocrest-jmb585-m2-sata.html"},"url":"https://pipci.jeffgeerling.com//cards_storage/iocrest-jmb585-m2-sata.html"}
diff --git a/cards_storage/iocrest-mini-pcie-dual-sata.html b/cards_storage/iocrest-mini-pcie-dual-sata.html
index e6962df44..2bc1e94dd 100644
--- a/cards_storage/iocrest-mini-pcie-dual-sata.html
+++ b/cards_storage/iocrest-mini-pcie-dual-sata.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The IOCrest mini PCIe dual SATA card has an ASM1061 chip on it.","headline":"IOCrest mini PCIe dual SATA card (ASM1061 chipset)","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_storage/iocrest-mini-pcie-dual-sata.html"},"url":"https://pipci.jeffgeerling.com//cards_storage/iocrest-mini-pcie-dual-sata.html"}
diff --git a/cards_storage/iocrest-sata-2-port-jmb582.html b/cards_storage/iocrest-sata-2-port-jmb582.html
index a24727b17..61fa7209c 100644
--- a/cards_storage/iocrest-sata-2-port-jmb582.html
+++ b/cards_storage/iocrest-sata-2-port-jmb582.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Since mid-2021, SATA support is built into the Raspberry Pi kernel, so assuming you have updated to the latest version (sudo apt upgrade -y), this card should work out of the box.","headline":"IOCrest JMB582 PCIe Gen3 SATA Controller","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_storage/iocrest-sata-2-port-jmb582.html"},"url":"https://pipci.jeffgeerling.com//cards_storage/iocrest-sata-2-port-jmb582.html"}
diff --git a/cards_storage/iocrest-sata-3-marvell-9215.html b/cards_storage/iocrest-sata-3-marvell-9215.html
index f4d856fc1..4c1e01c39 100644
--- a/cards_storage/iocrest-sata-3-marvell-9215.html
+++ b/cards_storage/iocrest-sata-3-marvell-9215.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Since mid-2021, SATA support is built into the Raspberry Pi kernel, so assuming you have updated to the latest version (sudo apt upgrade -y), this card should work out of the box.","headline":"IO Crest 4 Port SATA III PCIe x1 with Marvell 9215","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_storage/iocrest-sata-3-marvell-9215.html"},"url":"https://pipci.jeffgeerling.com//cards_storage/iocrest-sata-3-marvell-9215.html"}
diff --git a/cards_storage/iocrest-sata-5-port-jmb585.html b/cards_storage/iocrest-sata-5-port-jmb585.html
index adc0f9833..ca672f2d4 100644
--- a/cards_storage/iocrest-sata-5-port-jmb585.html
+++ b/cards_storage/iocrest-sata-5-port-jmb585.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Since mid-2021, SATA support is built into the Raspberry Pi kernel, so assuming you have updated to the latest version (sudo apt upgrade -y), this card should work out of the box.","headline":"IOCrest JMB585 PCIe Gen3 SATA Controller","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_storage/iocrest-sata-5-port-jmb585.html"},"url":"https://pipci.jeffgeerling.com//cards_storage/iocrest-sata-5-port-jmb585.html"}
diff --git a/cards_storage/jmicron-jmb263.html b/cards_storage/jmicron-jmb263.html
index 3c4b1ed9a..529201971 100644
--- a/cards_storage/jmicron-jmb263.html
+++ b/cards_storage/jmicron-jmb263.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Check the GitHub issue to follow testing progress.","headline":"JMicron JMB363 PCI Express to SATA II / PATA Controller","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_storage/jmicron-jmb263.html"},"url":"https://pipci.jeffgeerling.com//cards_storage/jmicron-jmb263.html"}
diff --git a/cards_storage/jmicron-jmb362-host-controller.html b/cards_storage/jmicron-jmb362-host-controller.html
index ded49e653..e9ccef6ac 100644
--- a/cards_storage/jmicron-jmb362-host-controller.html
+++ b/cards_storage/jmicron-jmb362-host-controller.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"From @guibom: This JMB362 is an older JMicron card and controller, but it works really well. No need for custom drivers or settings, it worked out-of-box with the latest kernel. Seems like a good solution for somebody that needs only 2 drives, and doesn’t want to modify their 1x PCIe slot.","headline":"JMicron JMB362 SATA Host Controller","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_storage/jmicron-jmb362-host-controller.html"},"url":"https://pipci.jeffgeerling.com//cards_storage/jmicron-jmb362-host-controller.html"}
diff --git a/cards_storage/marvell-88se9230-host-controller.html b/cards_storage/marvell-88se9230-host-controller.html
index f5f3defd9..b367528c7 100644
--- a/cards_storage/marvell-88se9230-host-controller.html
+++ b/cards_storage/marvell-88se9230-host-controller.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The Marvell 88SE9 is the successor to the 88se9130, with 2x PCIe 2.0 lanes and SATA III. It features Marvell’s “Hyperduo” feature set that allows SSDs to act as caches for HDDs, as well as striping, mirroring or RAID 10. TRIM is supported along with port multipliers. Apparently the card will even do disk encryption with a modified ROM.","headline":"Marvell 88SE9230 Host Controller","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_storage/marvell-88se9230-host-controller.html"},"url":"https://pipci.jeffgeerling.com//cards_storage/marvell-88se9230-host-controller.html"}
diff --git a/cards_storage/syba-sata-4-port-non-raid-asm1064.html b/cards_storage/syba-sata-4-port-non-raid-asm1064.html
index 6b648842b..2af868ff6 100644
--- a/cards_storage/syba-sata-4-port-non-raid-asm1064.html
+++ b/cards_storage/syba-sata-4-port-non-raid-asm1064.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This SATA controller works well with Raspberry Pi OS and allows attaching 4 SATA devices (powered separately). It uses the ASMedia 1064 chipset.","headline":"Syba/IOCrest ASM1064 PCIe SATA 4-port Controller","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_storage/syba-sata-4-port-non-raid-asm1064.html"},"url":"https://pipci.jeffgeerling.com//cards_storage/syba-sata-4-port-non-raid-asm1064.html"}
diff --git a/cards_storage/teratrend-2-port-sata-3-marvell-88se9130.html b/cards_storage/teratrend-2-port-sata-3-marvell-88se9130.html
index 1362d266b..e198f6ab2 100644
--- a/cards_storage/teratrend-2-port-sata-3-marvell-88se9130.html
+++ b/cards_storage/teratrend-2-port-sata-3-marvell-88se9130.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Check the GitHub issue to follow testing progress.","headline":"Teratrend 2-port SATA-III Marvell 88SE9130","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_storage/teratrend-2-port-sata-3-marvell-88se9130.html"},"url":"https://pipci.jeffgeerling.com//cards_storage/teratrend-2-port-sata-3-marvell-88se9130.html"}
diff --git a/cards_usb/Japan-NEC-Chipset.html b/cards_usb/Japan-NEC-Chipset.html
index 627241e6b..d0d6572a8 100644
--- a/cards_usb/Japan-NEC-Chipset.html
+++ b/cards_usb/Japan-NEC-Chipset.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"PCIe to USB 3.0 Adapter for Raspberry Pi Compute Module 4 IO Board. The main chipset is Japan NEC d720200F1.","headline":"Usb 3.0 Pci-e Host Card Japan NEC Chipset","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_usb/Japan-NEC-Chipset.html"},"url":"https://pipci.jeffgeerling.com//cards_usb/Japan-NEC-Chipset.html"}
diff --git a/cards_usb/a-adwits-vl805.html b/cards_usb/a-adwits-vl805.html
index 9d7d6d1c8..10d83e33c 100644
--- a/cards_usb/a-adwits-vl805.html
+++ b/cards_usb/a-adwits-vl805.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This USB 3.0 controller card has four USB 3.0 ports, uses the VLI VL805 chipset (which is supported by Pi OS out of the box), and has a female 4-pin molex power connector that must be used to provide power to the card.","headline":"A ADWITS PCIe 1x ‘PCI Experss’ USB 3.0 adapter with VL805","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_usb/a-adwits-vl805.html"},"url":"https://pipci.jeffgeerling.com//cards_usb/a-adwits-vl805.html"}
diff --git a/cards_usb/inateck-pcie-usb3.html b/cards_usb/inateck-pcie-usb3.html
index 38a2fffc4..b584dcb28 100644
--- a/cards_usb/inateck-pcie-usb3.html
+++ b/cards_usb/inateck-pcie-usb3.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This USB 3.0 controller card has two external USB 3.0 ports, and a male header for two more internal ports, and it uses a Fresco Logic chipset (which is supported by Pi OS out of the box).","headline":"Inateck PCIe x1 USB 3.0 adapter","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_usb/inateck-pcie-usb3.html"},"url":"https://pipci.jeffgeerling.com//cards_usb/inateck-pcie-usb3.html"}
diff --git a/cards_usb/mzhou-usb3-sata-iii.html b/cards_usb/mzhou-usb3-sata-iii.html
index b5749c254..a80d63009 100644
--- a/cards_usb/mzhou-usb3-sata-iii.html
+++ b/cards_usb/mzhou-usb3-sata-iii.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This USB 3.0 card uses a Renesas uPD720201 USB 3.0 controller, and works with the Raspberry Pi, and also includes a SATA M.2 slot which can accept SSDs.","headline":"MZHOU USB 3.0 adapter with M.2 SATA SSD slot","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_usb/mzhou-usb3-sata-iii.html"},"url":"https://pipci.jeffgeerling.com//cards_usb/mzhou-usb3-sata-iii.html"}
diff --git a/cards_usb/renesas-UPD720201-usb3-6amlifestyle.html b/cards_usb/renesas-UPD720201-usb3-6amlifestyle.html
index 1ee52e848..d4c562e7d 100644
--- a/cards_usb/renesas-UPD720201-usb3-6amlifestyle.html
+++ b/cards_usb/renesas-UPD720201-usb3-6amlifestyle.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Branded under many different names, this is a generic USB 3.0 expansion card with four USB 3.0 ports, and the Renesas uPD720201 USB 3.0 controller.","headline":"Renesas µPD720201 USB 3.0 Host Controller","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_usb/renesas-UPD720201-usb3-6amlifestyle.html"},"url":"https://pipci.jeffgeerling.com//cards_usb/renesas-UPD720201-usb3-6amlifestyle.html"}
diff --git a/cards_usb/renesas-mpcie-d720202-usb3.html b/cards_usb/renesas-mpcie-d720202-usb3.html
index b980eb3d1..ccc6123b2 100644
--- a/cards_usb/renesas-mpcie-d720202-usb3.html
+++ b/cards_usb/renesas-mpcie-d720202-usb3.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The Renesas Electronics µPD720202 USB 3.0 Host Controller is is a USB host controller compatible with the USB 3.0 and xHCI (eXtensible Host Controller Interface) 1.0 specifications. The system bus is compatible with the PCIe Gen2 specification. The controller provides two USB ports with LS (Low-Speed) / FS (Full-Speed) / HS (High-Speed) / SS (SuperSpeed) support.","headline":"Renesas µPD720202 USB 3.0 Host Controller","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_usb/renesas-mpcie-d720202-usb3.html"},"url":"https://pipci.jeffgeerling.com//cards_usb/renesas-mpcie-d720202-usb3.html"}
diff --git a/cards_usb/syba-sd-pex20199.html b/cards_usb/syba-sd-pex20199.html
index 5a9dc3265..cc04db40b 100644
--- a/cards_usb/syba-sd-pex20199.html
+++ b/cards_usb/syba-sd-pex20199.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This is the best USB 3.0 card I tested, though I haven’t yet tried out the Type-C USB 3.1 port to see if it behaves any differently from the Type-A USB 3.0 ports.","headline":"Syba SD-PEX20199 PCIe x1 USB 3.1 & 3.0 adapter","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_usb/syba-sd-pex20199.html"},"url":"https://pipci.jeffgeerling.com//cards_usb/syba-sd-pex20199.html"}
diff --git a/cards_usb/waveshare-usb3-cm4-io-board.html b/cards_usb/waveshare-usb3-cm4-io-board.html
index 16a42daec..9381b5832 100644
--- a/cards_usb/waveshare-usb3-cm4-io-board.html
+++ b/cards_usb/waveshare-usb3-cm4-io-board.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"PCI-E to USB 3.2 Gen1 Adapter for Raspberry Pi Compute Module 4 IO Board.","headline":"Waveshare PCIe to USB 3.0 CM4 IO board","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//cards_usb/waveshare-usb3-cm4-io-board.html"},"url":"https://pipci.jeffgeerling.com//cards_usb/waveshare-usb3-cm4-io-board.html"}
diff --git a/hats/52pi-2.5g-pcie-network-adapter-hat.html b/hats/52pi-2.5g-pcie-network-adapter-hat.html
index ce4d06ac8..dac109b84 100644
--- a/hats/52pi-2.5g-pcie-network-adapter-hat.html
+++ b/hats/52pi-2.5g-pcie-network-adapter-hat.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This hat gives the Raspberry Pi 5 a 2.5G network port using the RTL8125BG chip. The length is longer than the standard HAT for easy rj45 connection.","headline":"52Pi 2.5G PCIe Network Adapter","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//hats/52pi-2.5g-pcie-network-adapter-hat.html"},"url":"https://pipci.jeffgeerling.com//hats/52pi-2.5g-pcie-network-adapter-hat.html"}
diff --git a/hats/52pi-nvdac-hat-a01.html b/hats/52pi-nvdac-hat-a01.html
index 8204aaa59..bf37e06d5 100644
--- a/hats/52pi-nvdac-hat-a01.html
+++ b/hats/52pi-nvdac-hat-a01.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This HAT supports 2230 and 2242-size M-key NVMe SSDs, and has slots cut out for easier access to the GPIO pins and CSI/DSI cables. There are also ventilation holes under the drive for better airflow when used with the Active Cooler or other fans or heatsinks.","headline":"52Pi NVDAC","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//hats/52pi-nvdac-hat-a01.html"},"url":"https://pipci.jeffgeerling.com//hats/52pi-nvdac-hat-a01.html"}
diff --git a/hats/52pi-nvdigi-hat-a02.html b/hats/52pi-nvdigi-hat-a02.html
index 9f3709e8b..b4bb1316e 100644
--- a/hats/52pi-nvdigi-hat-a02.html
+++ b/hats/52pi-nvdigi-hat-a02.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This HAT supports 2230 and 2242-size M-key NVMe SSDs, and has slots cut out for easier access to the GPIO pins and CSI/DSI cables. There are also ventilation holes under the drive for better airflow when used with the Active Cooler or other fans or heatsinks.","headline":"52Pi NVDigi","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//hats/52pi-nvdigi-hat-a02.html"},"url":"https://pipci.jeffgeerling.com//hats/52pi-nvdigi-hat-a02.html"}
diff --git a/hats/52pi-nvme-hat-n04.html b/hats/52pi-nvme-hat-n04.html
index aa4a0abfa..d95f63c2f 100644
--- a/hats/52pi-nvme-hat-n04.html
+++ b/hats/52pi-nvme-hat-n04.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This M.2 NVMe HAT supports 2230, 2242, 2260, or 2280-size M-key NVMe SSDs, and has slots cut out for easier access to the GPIO pins and CSI/DSI cables. There are also ventilation holes under the drive and to its side for better airflow when used with the Active Cooler or other fans or heatsinks.","headline":"52Pi N04 M.2 2280 NVMe Top","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//hats/52pi-nvme-hat-n04.html"},"url":"https://pipci.jeffgeerling.com//hats/52pi-nvme-hat-n04.html"}
diff --git a/hats/52pi-nvme-hat-n05.html b/hats/52pi-nvme-hat-n05.html
index c44712cf6..05c41dd26 100644
--- a/hats/52pi-nvme-hat-n05.html
+++ b/hats/52pi-nvme-hat-n05.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This M.2 NVMe HAT supports 2230 and 2242-size M-key NVMe SSDs, and has slots cut out for easier access to the GPIO pins and CSI/DSI cables. There are also ventilation holes under the drive for better airflow when used with the Active Cooler or other fans or heatsinks.","headline":"52Pi N05 M.2 2242 NVMe Top","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//hats/52pi-nvme-hat-n05.html"},"url":"https://pipci.jeffgeerling.com//hats/52pi-nvme-hat-n05.html"}
diff --git a/hats/52pi-pcie-x1-slot-hat.html b/hats/52pi-pcie-x1-slot-hat.html
index 307358e63..9e3c054ac 100644
--- a/hats/52pi-pcie-x1-slot-hat.html
+++ b/hats/52pi-pcie-x1-slot-hat.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"52Pi has been working on a PCIe x1 slot (open-ended) HAT board for the Pi 5, which would allow installing practically any PCIe device directly on top of the Pi 5.","headline":"52Pi PCIe x1 Slot HAT","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//hats/52pi-pcie-x1-slot-hat.html"},"url":"https://pipci.jeffgeerling.com//hats/52pi-pcie-x1-slot-hat.html"}
diff --git a/hats/52pi-pd-power-hat.html b/hats/52pi-pd-power-hat.html
index 517aded99..dbe8f7464 100644
--- a/hats/52pi-pd-power-hat.html
+++ b/hats/52pi-pd-power-hat.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Product Description The RPi 5 PD Power expansion board is designed to enhance the functionality of the Raspberry Pi 5 by providing Power Delivery (PD) capabilities. Named “RPi 5 PD Power,” this expansion board supports an Always-ON switch, enabling automatic startup of the Raspberry Pi upon power restoration. Additionally, it offers the convenience of manual power control through a push-button mechanism.","headline":"52Pi PD Power HAT","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//hats/52pi-pd-power-hat.html"},"url":"https://pipci.jeffgeerling.com//hats/52pi-pd-power-hat.html"}
diff --git a/hats/geeekpi-p33-m2-nvme-poe-hat.html b/hats/geeekpi-p33-m2-nvme-poe-hat.html
index 50f633444..ca0a4038c 100644
--- a/hats/geeekpi-p33-m2-nvme-poe-hat.html
+++ b/hats/geeekpi-p33-m2-nvme-poe-hat.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This HAT supports PoE+, supplying the Pi with at 5.1V / 4.5A, and provides enough clearance for the Pi 5 Active Cooler to be used with the Pi.","headline":"GeeekPi P33 M.2 NVME M-Key PoE+ Hat","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//hats/geeekpi-p33-m2-nvme-poe-hat.html"},"url":"https://pipci.jeffgeerling.com//hats/geeekpi-p33-m2-nvme-poe-hat.html"}
diff --git a/hats/geekworm-x1001-nvme-hat.html b/hats/geekworm-x1001-nvme-hat.html
index 72659b056..7911e9041 100644
--- a/hats/geekworm-x1001-nvme-hat.html
+++ b/hats/geekworm-x1001-nvme-hat.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Geekworm’s X1001 is an NVMe SSD HAT for the Pi 5, supporting 2230/2242/2260/2280 NVMe M.2 SSDs.","headline":"Geekworm X1001 NVMe HAT","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//hats/geekworm-x1001-nvme-hat.html"},"url":"https://pipci.jeffgeerling.com//hats/geekworm-x1001-nvme-hat.html"}
diff --git a/hats/geekworm-x1004-dual-2280-nvme-hat.html b/hats/geekworm-x1004-dual-2280-nvme-hat.html
index fbfb2edee..74db6c197 100644
--- a/hats/geekworm-x1004-dual-2280-nvme-hat.html
+++ b/hats/geekworm-x1004-dual-2280-nvme-hat.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Geekworm’s X1004 holds up to two 2280-size M.2 NVMe SSDs. It uses an ASM1182e PCIe Gen 2 switch to split the Pi’s single Gen 2 lane into two separate slots.","headline":"Geekworm X1004 Dual M.2 2280 NVMe HAT","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//hats/geekworm-x1004-dual-2280-nvme-hat.html"},"url":"https://pipci.jeffgeerling.com//hats/geekworm-x1004-dual-2280-nvme-hat.html"}
diff --git a/hats/geekworm-x1011-4-drive-nvme.html b/hats/geekworm-x1011-4-drive-nvme.html
index 8fbd81621..14ffda44f 100644
--- a/hats/geekworm-x1011-4-drive-nvme.html
+++ b/hats/geekworm-x1011-4-drive-nvme.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Geekworm’s X1011 is a 4-drive M.2 NVMe SSD carrier which uses an ASmedia PCIe Gen 2 switch to bridge four NVMe drives to a Raspberry Pi 5.","headline":"Geekworm X1011 PCIe to Four M.2 NVMe HAT","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//hats/geekworm-x1011-4-drive-nvme.html"},"url":"https://pipci.jeffgeerling.com//hats/geekworm-x1011-4-drive-nvme.html"}
diff --git a/hats/hackergadgets-nvme-hat.html b/hats/hackergadgets-nvme-hat.html
index af6ed3bb4..a173967d8 100644
--- a/hats/hackergadgets-nvme-hat.html
+++ b/hats/hackergadgets-nvme-hat.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"HackerGadgets / Vileer described an NVME Hat for Raspberry Pi 5 on Twitter, which would be the first such card with a cutout specifically for the fan position in the Pi case (many people have asked ‘what about ventilation so you don’t block the fan from hitting the SoC below!).","headline":"HackerGadgets NVMe HAT","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//hats/hackergadgets-nvme-hat.html"},"url":"https://pipci.jeffgeerling.com//hats/hackergadgets-nvme-hat.html"}
diff --git a/hats/hackergadgets-poe-nvme-hat.html b/hats/hackergadgets-poe-nvme-hat.html
index 88f00b787..504e3560a 100644
--- a/hats/hackergadgets-poe-nvme-hat.html
+++ b/hats/hackergadgets-poe-nvme-hat.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"HackerGadgets designed this PoE+ HAT to fit inside the official Pi 5 case, while also cramming in a few other special features:","headline":"HackerGadgets PoE + NVMe HAT","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//hats/hackergadgets-poe-nvme-hat.html"},"url":"https://pipci.jeffgeerling.com//hats/hackergadgets-poe-nvme-hat.html"}
diff --git a/hats/mcuzone-mpw7-wifi-7.html b/hats/mcuzone-mpw7-wifi-7.html
index fa9efbc40..e1fd9d2a7 100644
--- a/hats/mcuzone-mpw7-wifi-7.html
+++ b/hats/mcuzone-mpw7-wifi-7.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This board includes an M.2 E-key slot on top, suitable for WiFi 5/6/7 cards, and you can order it with or without external SMA antenna connectors.","headline":"Mcuzone MPW7 E-key WiFi 7 HAT","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//hats/mcuzone-mpw7-wifi-7.html"},"url":"https://pipci.jeffgeerling.com//hats/mcuzone-mpw7-wifi-7.html"}
diff --git a/hats/n-fuse-poe-hat-pcie.html b/hats/n-fuse-poe-hat-pcie.html
index 643767035..b07cc1d01 100644
--- a/hats/n-fuse-poe-hat-pcie.html
+++ b/hats/n-fuse-poe-hat-pcie.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"n|fuse has a set of PCIe HATs including PoE+ support, for:","headline":"n fuse PoE HAT with PCIe options","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//hats/n-fuse-poe-hat-pcie.html"},"url":"https://pipci.jeffgeerling.com//hats/n-fuse-poe-hat-pcie.html"}
diff --git a/hats/ocp-tap-timehat-v2.html b/hats/ocp-tap-timehat-v2.html
index 1a8fbdc27..88ee0b11e 100644
--- a/hats/ocp-tap-timehat-v2.html
+++ b/hats/ocp-tap-timehat-v2.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The TimeHAT V2 places a PTP-capable Intel i226 2.5 Gbps Ethernet NIC on a Pi HAT with PPS in/out.","headline":"OCP-TAP TimeHAT V2","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//hats/ocp-tap-timehat-v2.html"},"url":"https://pipci.jeffgeerling.com//hats/ocp-tap-timehat-v2.html"}
diff --git a/hats/ocp-tap-timehat.html b/hats/ocp-tap-timehat.html
index 9ca0433ab..7f68df141 100644
--- a/hats/ocp-tap-timehat.html
+++ b/hats/ocp-tap-timehat.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The TimeHAT V1 places a PTP-capable Intel i225 NIC on a Pi HAT with PPS in/out (though there aren’t full docs as this is an early prototype with a few bodges to get it somewhat functional).","headline":"OCP-TAP TimeHAT V1","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//hats/ocp-tap-timehat.html"},"url":"https://pipci.jeffgeerling.com//hats/ocp-tap-timehat.html"}
diff --git a/hats/pcbway-nvme-hat-nvpi5-2242t.html b/hats/pcbway-nvme-hat-nvpi5-2242t.html
index d5b0462dc..b092377b5 100644
--- a/hats/pcbway-nvme-hat-nvpi5-2242t.html
+++ b/hats/pcbway-nvme-hat-nvpi5-2242t.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"NVMe (M.2 M-Key 2230, 2242 PCIe Gen3 x1) SSD HAT for Raspberry Pi 5","headline":"NVPI5-2242T NVMe HAT","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//hats/pcbway-nvme-hat-nvpi5-2242t.html"},"url":"https://pipci.jeffgeerling.com//hats/pcbway-nvme-hat-nvpi5-2242t.html"}
diff --git a/hats/pcbway-nvme-hat-nvpi5-2280b.html b/hats/pcbway-nvme-hat-nvpi5-2280b.html
index 5134f4338..15e81395a 100644
--- a/hats/pcbway-nvme-hat-nvpi5-2280b.html
+++ b/hats/pcbway-nvme-hat-nvpi5-2280b.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"NVMe (M.2 M-Key 2230, 2242, 2260, 2280 PCIe Gen3 x1) SSD base peripheral Board for Raspberry Pi 5","headline":"NVPI5-2280B NVMe Base","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//hats/pcbway-nvme-hat-nvpi5-2280b.html"},"url":"https://pipci.jeffgeerling.com//hats/pcbway-nvme-hat-nvpi5-2280b.html"}
diff --git a/hats/pi-nvme-hat.html b/hats/pi-nvme-hat.html
index 8f7c5fa91..e438f0c21 100644
--- a/hats/pi-nvme-hat.html
+++ b/hats/pi-nvme-hat.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The Raspberry Pi M.2 NVMe HAT allows you to add on 2230 and 2242-size NVMe SSDs, and fits inside the official Pi 5 case, though with little room for airflow.","headline":"Raspberry Pi NVMe HAT","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//hats/pi-nvme-hat.html"},"url":"https://pipci.jeffgeerling.com//hats/pi-nvme-hat.html"}
diff --git a/hats/pimoroni-nvme-base-duo.html b/hats/pimoroni-nvme-base-duo.html
index 81e1a95ab..628491540 100644
--- a/hats/pimoroni-nvme-base-duo.html
+++ b/hats/pimoroni-nvme-base-duo.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Pimoroni’s NVMe Base Duo bridges two NVMe M.2 E-key slots (2280/2260/2242/2230) into the single Pi 5 PCIe port, using an ASMedia ASM1182e PCIe Gen 2.0 switch.","headline":"Pimoroni NVMe Base Duo","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//hats/pimoroni-nvme-base-duo.html"},"url":"https://pipci.jeffgeerling.com//hats/pimoroni-nvme-base-duo.html"}
diff --git a/hats/pimoroni-nvme-base.html b/hats/pimoroni-nvme-base.html
index 23dce75e4..73b1c2292 100644
--- a/hats/pimoroni-nvme-base.html
+++ b/hats/pimoroni-nvme-base.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Pimoroni’s NVMe Base adds a twist to the concept of an NVMe mounted underneath the Pi 5—or rather, a ‘bend’.","headline":"Pimoroni NVMe BASE","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//hats/pimoroni-nvme-base.html"},"url":"https://pipci.jeffgeerling.com//hats/pimoroni-nvme-base.html"}
diff --git a/hats/pineboards-hat-ai.html b/hats/pineboards-hat-ai.html
index d0865a863..eb227e461 100644
--- a/hats/pineboards-hat-ai.html
+++ b/hats/pineboards-hat-ai.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Pineboards’ Hat AI! is designed for 2230-size E-key M.2 PCIe devices, like Coral TPUs or WiFi cards.","headline":"Pineboards Hat AI!","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//hats/pineboards-hat-ai.html"},"url":"https://pipci.jeffgeerling.com//hats/pineboards-hat-ai.html"}
diff --git a/hats/pineboards-hatai-dual-edge-tpu.html b/hats/pineboards-hatai-dual-edge-tpu.html
index d1facba76..1073b997d 100644
--- a/hats/pineboards-hatai-dual-edge-tpu.html
+++ b/hats/pineboards-hatai-dual-edge-tpu.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Pineboards offers a Hat AI! Dual Edge Coral TPU Bundle for Raspberry Pi 5, which unites a Dual Edge Coral TPU for AI/ML/inference to the Raspberry Pi 5, through a PCIe Switch to support both PCIe lanes for both TPUs.","headline":"Pineboards HatAI! Dual Edge TPU","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//hats/pineboards-hatai-dual-edge-tpu.html"},"url":"https://pipci.jeffgeerling.com//hats/pineboards-hatai-dual-edge-tpu.html"}
diff --git a/hats/pineboards-hatdrive-bottom.html b/hats/pineboards-hatdrive-bottom.html
index 938eb8d01..3186edb77 100644
--- a/hats/pineboards-hatdrive-bottom.html
+++ b/hats/pineboards-hatdrive-bottom.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The Pineboards HatDrive! Bottom is an M.2 HAT for the Raspberry Pi 5. It accepts 2242 or 2280-sized NVMe SSDs (or any other PCIe device with M.2 M-key), and includes a 40mm FPC cable to connect the HAT to the Pi’s PCIe external connector.","headline":"Pineboards HatDrive! Bottom","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//hats/pineboards-hatdrive-bottom.html"},"url":"https://pipci.jeffgeerling.com//hats/pineboards-hatdrive-bottom.html"}
diff --git a/hats/pineboards-hatdrive-commander.html b/hats/pineboards-hatdrive-commander.html
index c4badddf6..94759d217 100644
--- a/hats/pineboards-hatdrive-commander.html
+++ b/hats/pineboards-hatdrive-commander.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The Pineboards HatBRICK! Commander splits the Pi’s single PCIe Gen 2.0 lane into two PCIe Gen 2.0 ports, via an integrated ASMedia ASM8211e PCIe Gen 2.0 switch chip.","headline":"Pineboards HatBRICK! Commander","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//hats/pineboards-hatdrive-commander.html"},"url":"https://pipci.jeffgeerling.com//hats/pineboards-hatdrive-commander.html"}
diff --git a/hats/pineboards-hatdrive-dual-nvme-m2.html b/hats/pineboards-hatdrive-dual-nvme-m2.html
index 23ca0f785..7d3713168 100644
--- a/hats/pineboards-hatdrive-dual-nvme-m2.html
+++ b/hats/pineboards-hatdrive-dual-nvme-m2.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Pineboards’ HatDrive! Dual NVMe Board includes an ASmedia ASM1182e PCIe Gen 2 switch chip to split one lane of PCIe Gen 2 from the Pi 5 to two 2230 or 2242 M.2 NVMe SSD M-key slots.","headline":"Pineboards HatDrive! Dual NVMe","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//hats/pineboards-hatdrive-dual-nvme-m2.html"},"url":"https://pipci.jeffgeerling.com//hats/pineboards-hatdrive-dual-nvme-m2.html"}
diff --git a/hats/pineboards-hatdrive-top.html b/hats/pineboards-hatdrive-top.html
index c2f94823a..18f2a9c4c 100644
--- a/hats/pineboards-hatdrive-top.html
+++ b/hats/pineboards-hatdrive-top.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The Pineboards HatDrive! Top is an M.2 HAT for the Raspberry Pi 5. It accepts 2230 or 2242-sized NVMe SSDs (or any other PCIe device with M.2 M-key), and includes a 40mm FPC cable to connect the HAT to the Pi’s PCIe external connector.","headline":"Pineboards HatDrive! Top","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//hats/pineboards-hatdrive-top.html"},"url":"https://pipci.jeffgeerling.com//hats/pineboards-hatdrive-top.html"}
diff --git a/hats/pineboards-hatnet-2.5g.html b/hats/pineboards-hatnet-2.5g.html
index 28835af37..84be7baa4 100644
--- a/hats/pineboards-hatnet-2.5g.html
+++ b/hats/pineboards-hatnet-2.5g.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The Pineboards HatNET! 2.5G is a 2.5 Gigabit NIC for the Raspberry Pi 5.","headline":"Pineboards HatNET! 2.5G","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//hats/pineboards-hatnet-2.5g.html"},"url":"https://pipci.jeffgeerling.com//hats/pineboards-hatnet-2.5g.html"}
diff --git a/hats/pineboards-upcity-lite.html b/hats/pineboards-upcity-lite.html
index bc84e4947..b0f62e916 100644
--- a/hats/pineboards-upcity-lite.html
+++ b/hats/pineboards-upcity-lite.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Pineboards uPCIty Lite adds an open-ended PCIe x4 slot on top of the Pi 5.","headline":"Pineboards uPCIty Lite","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//hats/pineboards-upcity-lite.html"},"url":"https://pipci.jeffgeerling.com//hats/pineboards-upcity-lite.html"}
diff --git a/hats/radxa-dual-2.5g-router.html b/hats/radxa-dual-2.5g-router.html
index 9457905aa..919815f2c 100644
--- a/hats/radxa-dual-2.5g-router.html
+++ b/hats/radxa-dual-2.5g-router.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This HAT includes two 2.5 Gbps Ethernet ports (Realtek 8125BG), an M.2 M-key NVMe slot (2230, 2242, 2260, 2280), and a 12V power input.","headline":"Radxa Dual 2.5G Router HAT","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//hats/radxa-dual-2.5g-router.html"},"url":"https://pipci.jeffgeerling.com//hats/radxa-dual-2.5g-router.html"}
diff --git a/hats/radxa-penta-sata-hat.html b/hats/radxa-penta-sata-hat.html
index fcbe0624b..6806272a0 100644
--- a/hats/radxa-penta-sata-hat.html
+++ b/hats/radxa-penta-sata-hat.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"This HAT includes four SATA drive connectors, plus one edge connector for a 5th drive, 12V power inputs (molex or barrel jack) to power both the drives and the Pi 5 via GPIO, a cable for the 5th drive, an FFC cable to connect the HAT to the Pi 5, and screws for the mounting.","headline":"Radxa Penta SATA HAT","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//hats/radxa-penta-sata-hat.html"},"url":"https://pipci.jeffgeerling.com//hats/radxa-penta-sata-hat.html"}
diff --git a/hats/waveshare-poe-hat-f.html b/hats/waveshare-poe-hat-f.html
index 5b3f45aae..62e5cfdb7 100644
--- a/hats/waveshare-poe-hat-f.html
+++ b/hats/waveshare-poe-hat-f.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"The Waveshare PoE HAT (F) for Raspberry Pi 5 is a $30 PoE HAT that should power the Raspberry Pi 5 off any PoE or PoE+ network switch/adapter.","headline":"Waveshare PoE HAT (F) for Pi 5","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//hats/waveshare-poe-hat-f.html"},"url":"https://pipci.jeffgeerling.com//hats/waveshare-poe-hat-f.html"}
diff --git a/hats/waveshare-poe-m2-hat-plus.html b/hats/waveshare-poe-m2-hat-plus.html
index d2e0d9541..1c9070f1d 100644
--- a/hats/waveshare-poe-m2-hat-plus.html
+++ b/hats/waveshare-poe-m2-hat-plus.html
@@ -20,11 +20,11 @@
-
+
+{"@context":"https://schema.org","@type":"BlogPosting","dateModified":"2024-10-30T18:28:02+00:00","datePublished":"2024-10-30T18:28:02+00:00","description":"Waveshare’s PCIe to M.2 + PoE HAT outputs 5V at 4.5A to the Pi, and includes a 12V 2A header as well. There is a small fan included, which blows air in through the top down towards the Pi, just over the SoC/RAM, so it should be able to keep the Pi cool in most environments, probably even without a heatsink.","headline":"Waveshare PCIe to M.2 Adapter with PoE Function","mainEntityOfPage":{"@type":"WebPage","@id":"https://pipci.jeffgeerling.com//hats/waveshare-poe-m2-hat-plus.html"},"url":"https://pipci.jeffgeerling.com//hats/waveshare-poe-m2-hat-plus.html"}
diff --git a/images/thumbnail/board-bigtreetech-cb1.png b/images/thumbnail/board-bigtreetech-cb1.png
index 08e92fab3..64ecce9c6 100644
Binary files a/images/thumbnail/board-bigtreetech-cb1.png and b/images/thumbnail/board-bigtreetech-cb1.png differ
diff --git a/images/thumbnail/board-chipsee-aio-cm4-156.png b/images/thumbnail/board-chipsee-aio-cm4-156.png
index cb4211a75..25fa9c33c 100644
Binary files a/images/thumbnail/board-chipsee-aio-cm4-156.png and b/images/thumbnail/board-chipsee-aio-cm4-156.png differ
diff --git a/images/thumbnail/board-cm4-3d-printer-mayermakes.png b/images/thumbnail/board-cm4-3d-printer-mayermakes.png
index 2bb136378..59b11a336 100644
Binary files a/images/thumbnail/board-cm4-3d-printer-mayermakes.png and b/images/thumbnail/board-cm4-3d-printer-mayermakes.png differ
diff --git a/images/thumbnail/board-cm4-matx.png b/images/thumbnail/board-cm4-matx.png
index 6c92da29f..92e6c0054 100644
Binary files a/images/thumbnail/board-cm4-matx.png and b/images/thumbnail/board-cm4-matx.png differ
diff --git a/images/thumbnail/board-cm4-net-carrier.png b/images/thumbnail/board-cm4-net-carrier.png
index 839290b19..faa5d0502 100644
Binary files a/images/thumbnail/board-cm4-net-carrier.png and b/images/thumbnail/board-cm4-net-carrier.png differ
diff --git a/images/thumbnail/board-cutiepie-tablet.png b/images/thumbnail/board-cutiepie-tablet.png
index 95d44302d..8bdd742f9 100644
Binary files a/images/thumbnail/board-cutiepie-tablet.png and b/images/thumbnail/board-cutiepie-tablet.png differ
diff --git a/images/thumbnail/board-exo-sense-pi.png b/images/thumbnail/board-exo-sense-pi.png
index 6b9c59c3b..bf501268b 100644
Binary files a/images/thumbnail/board-exo-sense-pi.png and b/images/thumbnail/board-exo-sense-pi.png differ
diff --git a/images/thumbnail/board-gpiobase-raspi-cm4.png b/images/thumbnail/board-gpiobase-raspi-cm4.png
index 06b26802a..d7b5aef17 100644
Binary files a/images/thumbnail/board-gpiobase-raspi-cm4.png and b/images/thumbnail/board-gpiobase-raspi-cm4.png differ
diff --git a/images/thumbnail/board-gumstix-rpi-cm4-uprev.png b/images/thumbnail/board-gumstix-rpi-cm4-uprev.png
index 8d3b84d40..56acbea89 100644
Binary files a/images/thumbnail/board-gumstix-rpi-cm4-uprev.png and b/images/thumbnail/board-gumstix-rpi-cm4-uprev.png differ
diff --git a/images/thumbnail/board-jakub-gal-tpu-cam.png b/images/thumbnail/board-jakub-gal-tpu-cam.png
index b98d78a6a..9ce31d1d4 100644
Binary files a/images/thumbnail/board-jakub-gal-tpu-cam.png and b/images/thumbnail/board-jakub-gal-tpu-cam.png differ
diff --git a/images/thumbnail/board-kincony-kc868.png b/images/thumbnail/board-kincony-kc868.png
index 790922665..764b24190 100644
Binary files a/images/thumbnail/board-kincony-kc868.png and b/images/thumbnail/board-kincony-kc868.png differ
diff --git a/images/thumbnail/board-lincoln-binns-cm4box-pro.png b/images/thumbnail/board-lincoln-binns-cm4box-pro.png
index 0400629c6..88cd5a78a 100644
Binary files a/images/thumbnail/board-lincoln-binns-cm4box-pro.png and b/images/thumbnail/board-lincoln-binns-cm4box-pro.png differ
diff --git a/images/thumbnail/board-mercury-streamer.png b/images/thumbnail/board-mercury-streamer.png
index d877a8bed..89116d019 100644
Binary files a/images/thumbnail/board-mercury-streamer.png and b/images/thumbnail/board-mercury-streamer.png differ
diff --git a/images/thumbnail/board-mii-store-cm4-adapter.png b/images/thumbnail/board-mii-store-cm4-adapter.png
index 9ea97ddde..d51d4d0e7 100644
Binary files a/images/thumbnail/board-mii-store-cm4-adapter.png and b/images/thumbnail/board-mii-store-cm4-adapter.png differ
diff --git a/images/thumbnail/board-mnt-reform.png b/images/thumbnail/board-mnt-reform.png
index b46425327..b7b5264b6 100644
Binary files a/images/thumbnail/board-mnt-reform.png and b/images/thumbnail/board-mnt-reform.png differ
diff --git a/images/thumbnail/board-olvint-cm4-nas-minipcie.png b/images/thumbnail/board-olvint-cm4-nas-minipcie.png
index c8d4c9d27..77cc48e21 100644
Binary files a/images/thumbnail/board-olvint-cm4-nas-minipcie.png and b/images/thumbnail/board-olvint-cm4-nas-minipcie.png differ
diff --git a/images/thumbnail/board-over-board-mini-itx.png b/images/thumbnail/board-over-board-mini-itx.png
index 29b00235b..a15c2efd6 100644
Binary files a/images/thumbnail/board-over-board-mini-itx.png and b/images/thumbnail/board-over-board-mini-itx.png differ
diff --git a/images/thumbnail/board-parvus-duracor-pi.png b/images/thumbnail/board-parvus-duracor-pi.png
index 9d511dd5e..e5f605434 100644
Binary files a/images/thumbnail/board-parvus-duracor-pi.png and b/images/thumbnail/board-parvus-duracor-pi.png differ
diff --git a/images/thumbnail/board-pibox-2-mini-nas.png b/images/thumbnail/board-pibox-2-mini-nas.png
index ff1adb735..03a99cf55 100644
Binary files a/images/thumbnail/board-pibox-2-mini-nas.png and b/images/thumbnail/board-pibox-2-mini-nas.png differ
diff --git a/images/thumbnail/board-picam-module.png b/images/thumbnail/board-picam-module.png
index edcbf2bcc..4d984c203 100644
Binary files a/images/thumbnail/board-picam-module.png and b/images/thumbnail/board-picam-module.png differ
diff --git a/images/thumbnail/board-pikvm-v4.png b/images/thumbnail/board-pikvm-v4.png
index 28edcfdb9..309a7e603 100644
Binary files a/images/thumbnail/board-pikvm-v4.png and b/images/thumbnail/board-pikvm-v4.png differ
diff --git a/images/thumbnail/board-pspi-compute.png b/images/thumbnail/board-pspi-compute.png
index 937cab8cc..9d133dd69 100644
Binary files a/images/thumbnail/board-pspi-compute.png and b/images/thumbnail/board-pspi-compute.png differ
diff --git a/images/thumbnail/board-rpi-cm4-gigabit-switch.png b/images/thumbnail/board-rpi-cm4-gigabit-switch.png
index 4d6458716..e28415994 100644
Binary files a/images/thumbnail/board-rpi-cm4-gigabit-switch.png and b/images/thumbnail/board-rpi-cm4-gigabit-switch.png differ
diff --git a/images/thumbnail/board-sega-game-gear-cm4-retropie.png b/images/thumbnail/board-sega-game-gear-cm4-retropie.png
index 61f6ab290..055c5f56b 100644
Binary files a/images/thumbnail/board-sega-game-gear-cm4-retropie.png and b/images/thumbnail/board-sega-game-gear-cm4-retropie.png differ
diff --git a/images/thumbnail/board-uptime-lab-cm4-mincab.png b/images/thumbnail/board-uptime-lab-cm4-mincab.png
index 692839fd7..1dcf05922 100644
Binary files a/images/thumbnail/board-uptime-lab-cm4-mincab.png and b/images/thumbnail/board-uptime-lab-cm4-mincab.png differ
diff --git a/images/thumbnail/board-wiretrustee-sata-4x-nas.png b/images/thumbnail/board-wiretrustee-sata-4x-nas.png
index d55fd1028..7e3d96292 100644
Binary files a/images/thumbnail/board-wiretrustee-sata-4x-nas.png and b/images/thumbnail/board-wiretrustee-sata-4x-nas.png differ
diff --git a/images/thumbnail/board-zega-piboy.png b/images/thumbnail/board-zega-piboy.png
index efc1ae0c3..8eae8d778 100644
Binary files a/images/thumbnail/board-zega-piboy.png and b/images/thumbnail/board-zega-piboy.png differ
diff --git a/images/thumbnail/gpu-radeon-rx7900xtx.png b/images/thumbnail/gpu-radeon-rx7900xtx.png
index f041a263a..a2da65f74 100644
Binary files a/images/thumbnail/gpu-radeon-rx7900xtx.png and b/images/thumbnail/gpu-radeon-rx7900xtx.png differ
diff --git a/images/thumbnail/hat-52pi-nvme-hat-n04.png b/images/thumbnail/hat-52pi-nvme-hat-n04.png
index cbfa9201a..a4f1c002b 100644
Binary files a/images/thumbnail/hat-52pi-nvme-hat-n04.png and b/images/thumbnail/hat-52pi-nvme-hat-n04.png differ
diff --git a/images/thumbnail/hat-52pi-nvme-hat-n05.png b/images/thumbnail/hat-52pi-nvme-hat-n05.png
index 5b6edf8cc..a55fe7951 100644
Binary files a/images/thumbnail/hat-52pi-nvme-hat-n05.png and b/images/thumbnail/hat-52pi-nvme-hat-n05.png differ
diff --git a/images/thumbnail/hat-geeekpi-p33-m2-nvme-poe-hat.png b/images/thumbnail/hat-geeekpi-p33-m2-nvme-poe-hat.png
index 62617dd64..219b9439a 100644
Binary files a/images/thumbnail/hat-geeekpi-p33-m2-nvme-poe-hat.png and b/images/thumbnail/hat-geeekpi-p33-m2-nvme-poe-hat.png differ
diff --git a/images/thumbnail/hat-mcuzone-mpw7-wifi-7.png b/images/thumbnail/hat-mcuzone-mpw7-wifi-7.png
index 7e0082865..3a61229c1 100644
Binary files a/images/thumbnail/hat-mcuzone-mpw7-wifi-7.png and b/images/thumbnail/hat-mcuzone-mpw7-wifi-7.png differ
diff --git a/images/thumbnail/hat-pineboards-hatdrive-commander.png b/images/thumbnail/hat-pineboards-hatdrive-commander.png
index 94f7845ef..4c92ff042 100644
Binary files a/images/thumbnail/hat-pineboards-hatdrive-commander.png and b/images/thumbnail/hat-pineboards-hatdrive-commander.png differ
diff --git a/images/thumbnail/m2-apple-1216-ssd.png b/images/thumbnail/m2-apple-1216-ssd.png
index 5a6cbd3ea..11b23f234 100644
Binary files a/images/thumbnail/m2-apple-1216-ssd.png and b/images/thumbnail/m2-apple-1216-ssd.png differ
diff --git a/images/thumbnail/network-innodisk-egpl-t101.png b/images/thumbnail/network-innodisk-egpl-t101.png
index 64c748433..29a1783d4 100644
Binary files a/images/thumbnail/network-innodisk-egpl-t101.png and b/images/thumbnail/network-innodisk-egpl-t101.png differ
diff --git a/images/thumbnail/network-intel-82599es.png b/images/thumbnail/network-intel-82599es.png
index ad1fe68c2..75c94fc8c 100644
Binary files a/images/thumbnail/network-intel-82599es.png and b/images/thumbnail/network-intel-82599es.png differ
diff --git a/images/thumbnail/network-sierra-wireless-em7565.png b/images/thumbnail/network-sierra-wireless-em7565.png
index 2f376e7e0..d3fed7038 100644
Binary files a/images/thumbnail/network-sierra-wireless-em7565.png and b/images/thumbnail/network-sierra-wireless-em7565.png differ
diff --git a/images/thumbnail/other-sangoma-a108.png b/images/thumbnail/other-sangoma-a108.png
index 304956407..a469bd4fd 100644
Binary files a/images/thumbnail/other-sangoma-a108.png and b/images/thumbnail/other-sangoma-a108.png differ
diff --git a/index.html b/index.html
index 5aa706083..22ab0ddb9 100644
--- a/index.html
+++ b/index.html
@@ -186,7 +186,7 @@ GPUs (Graphics Cards)
(Buy this Card)
None |
- Untested |
+ None |
Yes |