Part plans/suggestion to do

[likeproblem]

VERY_COOL_PLACEHOLDER

[Spartwo]

Working on some more parts today, don't forget that ReStock variantises by changing models rather than textures so for fuel tanks you need to config and mask for each version.

[Spartwo]

Marked off the Radial Nodes, Ore Tanks, and Sentinel

[Spartwo]

Remasked the drone cores to have a common pattern

[likeproblem]

I usually ignore variants unless it's something it's something massive change such as boat tail, and in the same texture file, etc

That's gonna cause issues when folks are wondering why it's not painting. The jumbo 64 for example has different geometry between the white and orange versions.

The issue is most variants are in another texture file, and just making another texture set for it would be quite a hassle, so I will leave variants for now, maybe an issue for post-release

[Spartwo]

Restock specifically tends to put all variants into a single texture and toggle the objects instead. It's not normal for ksp but it's very fortunate for this type of thing.

[likeproblem]

"Tends" is an understatement, almost all variants I met were in -2 file lol, check 25mTanks for example

[likeproblem]

@Spartwo Also, since I see you are working on decouplers and plates, could I ask a favour? I colored decouplers with green stripes and blue arrows, same for plates(and green bottom and blue lines), so please do the same. And if possible, can you figure out why boat tail refuses to work?

[Spartwo]

100!

[likeproblem]

Truly gives off this vibes

This is great news! We just started 3 weeks ago, so with this speed we can finish it by Christmas!

[Spartwo]

Remembered how to do multiple masks on the one part

[Spartwo]

No there's a certain way to declare secondary materials so they don't conflict on the same textureset

MATERIAL
{
shader = TU/Metallic
keyword = TU_RECOLOR

[likeproblem]

You just use different keyword?

[Spartwo]

and make sure to declare the objects, otherwise yea

[UncleMateo]

No there's a certain way to declare secondary materials so they don't conflict on the same textureset

MATERIAL { shader = TU/Metallic keyword = TU_RECOLOR

I knew there was a way to do that! I just couldn't figure it out

[Spartwo]

Couplers marked off

That misalignment isn't TURD

[likeproblem]

@Spartwo do you know what you did is so revolutionary? I was suffering from this problem since I started the project! I think you remember when I asked ZZetho for that, he has to know this!

Also with this we can group multiple meshes with different textures under one selector without any problems! Cupola and Mainsail were ones which suffered a lot from that! You are awesome, thank you so much! ❤️

[EmberSkyMedia]

I'm working on the relays (coloured the stacks tonight, working on the deploying tomorrow and then will ensure they are work in game and push the changes to the github fork).

[Spartwo]

Nice pattern consistency with the orbital scanner so far

[EmberSkyMedia]

Yes, I’m looking at previously done parts and trying to match the same style.

[Spartwo]

Comms 16 antennas done with consolidation of the image asset files. The different parts are segregated into thier own colour layers.

Will get the engine plates done before moving onto the struts or solar parts

[Spartwo]

Also started turning the restock models folder into temporary housing for fixes. Thankfully we're almost at 50% and still only 2 parts need changed

[likeproblem]

When you get engine plates please look why boattails don't work. I'll probably work on fuel tank variants today, a lot of them piled up

[Spartwo]

Working fine for me, I've rewritten the structure to do all of them so maybe it was however it was configured

[likeproblem]

@Spartwo why did you remove shrouds from engine plates?

[likeproblem]

Nvm you just did wizardry with excludeMesh, though why did you exclude fairing from texture switch?? All parts should have separate switch for fairings

[Spartwo]

Personal preference but sure I'll swap em back to multiple switchers

[likeproblem]

Don't, im commiting them rn

[likeproblem]

@Spartwo something happened to structural tubes... 5m had those blue tubes/pipes/structures inside, what happened?

Also seems like only engine plate 25m is colored, I guess because it was just a placeholder

[Spartwo]

There's two versions, one is blue one is unpainted

[likeproblem]

How do I switch between them?

[Spartwo]

Orange variants have painted ends and trusses.

[Spartwo]

Only the engine plate 2.5m is painted because the config is there but the mask isn't yet

[likeproblem]

Orange variants have painted ends and trusses.

Ooh, interesting approach!

Only the engine plate 2.5m is painted because the config is there but the mask isn't yet

I figured out

[EmberSkyMedia]

Is someone doing the remaining non-relay antennas? Or should I colour those next?

Alt: I could do the ISRU or Ladders 🪜

[EmberSkyMedia]

Likely just a blanket colour or maybe have the rungs one colour and the bars another… I thought about stripes but not sure that’s something people would want.

[Spartwo]

Restock ladders have detail

[likeproblem]

What about this? Mostly red but green in middle?

[Spartwo]

There's an underlying pattern in the base texture mostly to that effect.

[EmberSkyMedia]

Okay, I can do something like that.

[EmberSkyMedia]

Ladders and Antenna Paints are Done (Waiting on likeproblem configs).
I'm busy the next 2-3 days but I'll start on any remaining "RESOURCE" Folder items next (currently it looks like ISRU & Drill).

[Spartwo]

I've done the surface scanner

[EmberSkyMedia]

Okay, scratch scanners as they are both done :)

[likeproblem]

What are the scratch scanners again?

[UncleMateo]

I'm still having problems with these dang claws.. I had one of them more-or-less working, but I broke it in trying to fix its issues, but now I can't even get back to that point. but I've decided to just put work into another part whenever I get frustrated, so as to bring my rate of contribution higher when I get stuck like this (which seems to be my specialty). You'll see I just did that, just finished the larger structural hub by Rockomax.
In all honesty I was kind of demoralized at the loss of the forums, making it harder to continue the Sisyphean task of trying to figure out problematic parts. But things are looking up! The forums aint dead, at least not yet!

[likeproblem]

Can you commit whatever you have? I will check it and maybe try to fix it

[Spartwo]

[likeproblem]

Engine plates?

[Spartwo]

and boat-tails

[likeproblem]

Thanks :)
Again, sorry I can't really work much, but I hope to get at least 10 parts get done over weekends

[Spartwo]

I'm not exactly blasting through these myself right now

[UncleMateo]

Lookin' good! I'll try and put up a few parts tonight. I claimed a bunch, might take me a couple of days. The way it's looking, we might start crossing off several categories in short order, but certainly not fuel tanks, and definitely not engines. Engines are gonna be the end boss of this pack, the way things are shaping up, and it makes sense.. each one is generally a complicated texture file, a lot of them have multiple variants with different meshes, etc. I think getting that little check-mark up is good for morale, but after making a third list in notepad, only including the parts which we hadn't done yet, it became apparent that I need to start doing more engines. So from now on, I will always try to add an engine or two with whatever I'm working on.

Here's the breakdown, this counter includes all the Restock & Restock+ parts of course, but also included are any of the Stock/BG/MH parts that were not a part of Restock which did not receive full recolors, or which did receive some recolors that are broken by either Restock or RestockRecolour. In other words, this is the maximized part count right now. And, this was something I did a few days ago so I don't think it included the last update Spartwo did.

parts left

• engine:36
• fuel_tnk:25
• utility:18
• groud:15
• aeor:12
• coupling:12
• payload:12
• electrical:11
• thermal:11
• structural:10
• command:9

[Spartwo]

Pamnel

[UncleMateo]

Okay, cool! Well hopefully I didn't rudely steal a different part from you. But if so, know there was no ill will involved.

[Spartwo]

Strutting My Stuff

[Spartwo]

Looking Radiant

[Spartwo]

[Spartwo]

[EmberSkyMedia]

With the release of Firefly I have a bit more time this week to do a few parts, what needs to get done?

[Spartwo]

The bulk of stuff left is in fuel tanks and engines. Especially the latter.

[EmberSkyMedia]

Do we have a plan for the engines or a guide?
My thinking (if I may) is whatever we do to Restock to mirror CyroEngines and Extensions.

[Spartwo]

I don't believe enough of them are done to have a colour pattern that needs to yet be conformed with.

[EmberSkyMedia]

I’ll have a look at stock and missing history and see how they did it, ideally the RGB is such that colours look reasonably uniform.

[EmberSkyMedia]

I’ll start with the solid fuel rockets if no one has objections.

[Spartwo]

Commit 200 and 69%