all: Fix various spelling mistakes found by codespell 2.2.6.

Signed-off-by: Damien George <[email protected]>

Author: dpgeorge

docs/library/espnow.rst

@@ -287,7 +287,7 @@ after reboot/reset). This reduces the reliability of receiving ESP-NOW messages
 
 .. method:: ESPNow.irecv([timeout_ms])
 
-    Works like `ESPNow.recv()` but will re-use internal bytearrays to store the
+    Works like `ESPNow.recv()` but will reuse internal bytearrays to store the
     return values: ``[mac, msg]``, so that no new memory is allocated on each
     call.
 

docs/library/wm8960.rst

@@ -251,7 +251,7 @@ controlling its operation:
 
 .. method:: WM8960.expand_3d(level)
 
-    Enable Stereo 3D exansion.  *level* is a number between 0 and 15.
+    Enable Stereo 3D expansion.  *level* is a number between 0 and 15.
     A value of 0 disables the expansion.
 
 .. method:: WM8960.mono(active)

docs/reference/glossary.rst

@@ -32,7 +32,7 @@ Glossary
 
     callee-owned tuple
         This is a MicroPython-specific construct where, for efficiency
-        reasons, some built-in functions or methods may re-use the same
+        reasons, some built-in functions or methods may reuse the same
         underlying tuple object to return data. This avoids having to allocate
         a new tuple for every call, and reduces heap fragmentation. Programs
         should not hold references to callee-owned tuples and instead only

examples/hwapi/README.md

@@ -3,7 +3,7 @@ This directory shows the best practices for using MicroPython hardware API
 across various boards, with the aim to enable writing portable applications,
 which would work from a board to board, from a system to another systems.
 This is inherently a hard problem, because hardware is different from one
-board type to another, and even from examplar of board to another. For
+board type to another, and even from exemplar of board to another. For
 example, if your app requires an external LED, one user may connect it
 to one GPIO pin, while another user may find it much more convenient to
 use another pin. This of course applies to relays, buzzers, sensors, etc.

extmod/modbluetooth.c

@@ -504,7 +504,7 @@ STATIC int bluetooth_gatts_register_service(mp_obj_t uuid_in, mp_obj_t character
     // How many descriptors in the flattened list per characteristic.
     uint8_t *num_descriptors = m_new(uint8_t, len);
 
-    // Inititally allocate enough room for the number of characteristics.
+    // Initially allocate enough room for the number of characteristics.
     // Will be grown to accommodate descriptors as necessary.
     *num_handles = len;
     *handles = m_new(uint16_t, *num_handles);

extmod/nimble/modbluetooth_nimble.c

@@ -1856,7 +1856,7 @@ int mp_bluetooth_l2cap_recvinto(uint16_t conn_handle, uint16_t cid, uint8_t *buf
                 // re-enable receiving yet (as we need to complete the rest of IRQ handler first).
                 if (!chan->irq_in_progress) {
                     // We've already given the channel a new mbuf in l2cap_channel_event above, so
-                    // re-use that mbuf in the call to ble_l2cap_recv_ready. This will just
+                    // reuse that mbuf in the call to ble_l2cap_recv_ready. This will just
                     // give the channel more credits.
                     struct os_mbuf *sdu_rx = chan->chan->coc_rx.sdu;
                     assert(sdu_rx);

ports/cc3200/application.lds

@@ -83,7 +83,7 @@ SECTIONS
     } > SRAM
 
     /* place here functions that are only called during boot up, */
-    /* that way, we can re-use this area for the MicroPython heap */
+    /* that way, we can reuse this area for the MicroPython heap */
     .boot :
     {
         . = ALIGN(8);

ports/cc3200/fatfs/src/drivers/sd_diskio.c

@@ -363,7 +363,7 @@ DRESULT sd_disk_read (BYTE* pBuffer, DWORD ulSectorNumber, UINT SectorCount) {
 
 //*****************************************************************************
 //
-//! Wrties sector(s) to the disk drive.
+//! Writes sector(s) to the disk drive.
 //!
 //!
 //! This function writes specified number of sectors to the drive

ports/nrf/Makefile

@@ -536,7 +536,7 @@ SRC_QSTR += $(SRC_C) $(SRC_SHARED_C) $(DRIVERS_SRC_C) $(SRC_BOARD_MODULES)
 # SRC_QSTR
 SRC_QSTR_AUTO_DEPS +=
 
-# Making OBJ use an order-only depenedency on the generated pins.h file
+# Making OBJ use an order-only dependency on the generated pins.h file
 # has the side effect of making the pins.h file before we actually compile
 # any of the objects. The normal dependency generation will deal with the
 # case when pins.h is modified. But when it doesn't exist, we don't know

ports/nrf/drivers/bluetooth/ble_drv.c

@@ -942,7 +942,7 @@ static void sd_evt_handler(uint32_t evt_id) {
             break;
     }
 #if MICROPY_HW_USB_CDC
-    // Farward SOC events to USB CDC driver.
+    // Forward SOC events to USB CDC driver.
     usb_cdc_sd_event_handler(evt_id);
 #endif
 }