Description
I sign a primary image with version 1.1.3+4, then I create a test update signed-update.bin with version 1.2.4+6. I can clearly see those version numbers in the application headers of both images. I combine the primary image with the boatloader and flash with st-flash. It starts and the first time, the version cannot be read out and the boot cannot be confirmed. After the copy from the file signed-update.bin on SD card to SPI flash (Secondary slot) I reboot, magic is still bad, the swap is done, the new image starts and still the old version number is read out. After a second reboot, the swapped image starts again, magic is good but version number is still the old one.
[INFO][BL]: Starting MCUboot
[INFO][MCUb]: Primary image: magic=bad, swap_type=0x0, copy_done=0x2, image_ok=0x2
[INFO][MCUb]: Scratch: magic=unset, swap_type=0x1, copy_done=0x3, image_ok=0x3
[INFO][MCUb]: Boot source: none
[INFO][MCUb]: Image index: 0, Swap type: none
[INFO][BL]: Booting firmware image at 0x8021000
[INFO][HMC20]: Starting main thread
[ERROR DISPLAY 1149] cannot read version number: error_nr 1
[WARN][HMC20]: The boot could not been confirmed
[INFO][HMC20]: Secondary block device initialized
[INFO][HMC20]: Secondary block device erased
[INFO][HMC20]: copy chunk 0 at 0x00000
[INFO][HMC20]: copy chunk 1 at 0x04000
[INFO][HMC20]: copy chunk 2 at 0x08000
[INFO][HMC20]: copy chunk 3 at 0x0C000
[INFO][HMC20]: copy chunk 4 at 0x10000
[INFO][HMC20]: Copy done
[INFO][HMC20]: Reset MCU to update
[INFO][BL]: Starting MCUboot
[INFO][MCUb]: Primary image: magic=bad, swap_type=0x0, copy_done=0x2, image_ok=0x2
[INFO][MCUb]: Scratch: magic=unset, swap_type=0x1, copy_done=0x3, image_ok=0x3
[INFO][MCUb]: Boot source: none
[INFO][MCUb]: Image index: 0, Swap type: test
[INFO][MCUb]: Starting swap using scratch algorithm.
[INFO][BL]: Booting firmware image at 0x8021000
[INFO][main]: Boot confirmed
[INFO][main]: Hello version 1.1.3+4
I am new
[INFO][BL]: Starting MCUboot
[INFO][MCUb]: Primary image: magic=good, swap_type=0x2, copy_done=0x1, image_ok=0x1
[INFO][MCUb]: Scratch: magic=unset, swap_type=0x1, copy_done=0x3, image_ok=0x3
[INFO][MCUb]: Boot source: none
[INFO][MCUb]: Image index: 0, Swap type: none
[INFO][BL]: Booting firmware image at 0x8021000
[INFO][main]: Boot confirmed
[INFO][main]: Hello version 1.1.3+4
I am new
If you call boot_get_current_version(&version);, you call boot_read_image_header(&state, 0, &hdr, &status); where '0' is int slot, in swap_scratch.c. To read the version in the primary slot (0), you need the id of the secundary slot (1) because of the line:
boot_read_image_header() in swap_scratch.c:
#define BOOT_PRIMARY_SLOT 0
#define BOOT_SECONDARY_SLOT 1
...
/* If all segments have been swapped, the header is located in the other slot */
hdr_slot = (slot == BOOT_PRIMARY_SLOT) ? BOOT_SECONDARY_SLOT : BOOT_PRIMARY_SLOT;
This seems not to be logical. If I change to 1 I have the right version number:
swap_count 1
bs->idx 134399953
BOOT_STATUS_IDX_0 1
If all segments have been swapped, the header is located in the other slot
hdr_slot 0
area_id 0
[INFO][main]: Hello version 1.2.4+6
I am new