diff --git a/SPECS/wpa_supplicant/CVE-2023-52160.patch b/SPECS/wpa_supplicant/CVE-2023-52160.patch new file mode 100644 index 00000000000..7438b505e48 --- /dev/null +++ b/SPECS/wpa_supplicant/CVE-2023-52160.patch @@ -0,0 +1,180 @@ +From bd31011dbf906bb0eaf04cefb3076b0472dce422 Mon Sep 17 00:00:00 2001 +From: Sreenivasulu Malavathula +Date: Tue, 4 Feb 2025 10:44:41 -0600 +Subject: [PATCH] Address CVE-2023-52160 + +--- + src/eap_peer/eap_config.h | 8 ++++++ + src/eap_peer/eap_peap.c | 40 +++++++++++++++++++++++++++--- + src/eap_peer/eap_tls_common.c | 6 +++++ + src/eap_peer/eap_tls_common.h | 5 ++++ + wpa_supplicant/wpa_supplicant.conf | 7 ++++++ + 5 files changed, 63 insertions(+), 3 deletions(-) + +diff --git a/src/eap_peer/eap_config.h b/src/eap_peer/eap_config.h +index 3238f74..047eec2 100644 +--- a/src/eap_peer/eap_config.h ++++ b/src/eap_peer/eap_config.h +@@ -469,6 +469,14 @@ struct eap_peer_config { + * 1 = use cryptobinding if server supports it + * 2 = require cryptobinding + * ++ * phase2_auth option can be used to control Phase 2 (i.e., within TLS ++ * tunnel) behavior for PEAP: ++ * 0 = do not require Phase 2 authentication ++ * 1 = require Phase 2 authentication when client certificate ++ * (private_key/client_cert) is no used and TLS session resumption was ++ * not used (default) ++ * 2 = require Phase 2 authentication in all cases ++ * + * EAP-WSC (WPS) uses following options: pin=Device_Password and + * uuid=Device_UUID + * +diff --git a/src/eap_peer/eap_peap.c b/src/eap_peer/eap_peap.c +index 12e30df..6080697 100644 +--- a/src/eap_peer/eap_peap.c ++++ b/src/eap_peer/eap_peap.c +@@ -67,6 +67,7 @@ struct eap_peap_data { + u8 cmk[20]; + int soh; /* Whether IF-TNCCS-SOH (Statement of Health; Microsoft NAP) + * is enabled. */ ++ enum { NO_AUTH, FOR_INITIAL, ALWAYS } phase2_auth; + }; + + +@@ -114,6 +115,19 @@ static void eap_peap_parse_phase1(struct eap_peap_data *data, + wpa_printf(MSG_DEBUG, "EAP-PEAP: Require cryptobinding"); + } + ++ if (os_strstr(phase1, "phase2_auth=0")) { ++ data->phase2_auth = NO_AUTH; ++ wpa_printf(MSG_DEBUG, ++ "EAP-PEAP: Do not require Phase 2 authentication"); ++ } else if (os_strstr(phase1, "phase2_auth=1")) { ++ data->phase2_auth = FOR_INITIAL; ++ wpa_printf(MSG_DEBUG, ++ "EAP-PEAP: Require Phase 2 authentication for initial connection"); ++ } else if (os_strstr(phase1, "phase2_auth=2")) { ++ data->phase2_auth = ALWAYS; ++ wpa_printf(MSG_DEBUG, ++ "EAP-PEAP: Require Phase 2 authentication for all cases"); ++ } + #ifdef EAP_TNC + if (os_strstr(phase1, "tnc=soh2")) { + data->soh = 2; +@@ -142,6 +156,7 @@ static void * eap_peap_init(struct eap_sm *sm) + data->force_peap_version = -1; + data->peap_outer_success = 2; + data->crypto_binding = OPTIONAL_BINDING; ++ data->phase2_auth = FOR_INITIAL; + + if (config && config->phase1) + eap_peap_parse_phase1(data, config->phase1); +@@ -454,6 +469,20 @@ static int eap_tlv_validate_cryptobinding(struct eap_sm *sm, + } + + ++static bool peap_phase2_sufficient(struct eap_sm *sm, ++ struct eap_peap_data *data) ++{ ++ if ((data->phase2_auth == ALWAYS || ++ (data->phase2_auth == FOR_INITIAL && ++ !tls_connection_resumed(sm->ssl_ctx, data->ssl.conn) && ++ !data->ssl.client_cert_conf) || ++ data->phase2_eap_started) && ++ !data->phase2_eap_success) ++ return false; ++ return true; ++} ++ ++ + /** + * eap_tlv_process - Process a received EAP-TLV message and generate a response + * @sm: Pointer to EAP state machine allocated with eap_peer_sm_init() +@@ -568,6 +597,11 @@ static int eap_tlv_process(struct eap_sm *sm, struct eap_peap_data *data, + " - force failed Phase 2"); + resp_status = EAP_TLV_RESULT_FAILURE; + ret->decision = DECISION_FAIL; ++ } else if (!peap_phase2_sufficient(sm, data)) { ++ wpa_printf(MSG_INFO, ++ "EAP-PEAP: Server indicated Phase 2 success, but sufficient Phase 2 authentication has not been completed"); ++ resp_status = EAP_TLV_RESULT_FAILURE; ++ ret->decision = DECISION_FAIL; + } else { + resp_status = EAP_TLV_RESULT_SUCCESS; + ret->decision = DECISION_UNCOND_SUCC; +@@ -887,8 +921,7 @@ continue_req: + /* EAP-Success within TLS tunnel is used to indicate + * shutdown of the TLS channel. The authentication has + * been completed. */ +- if (data->phase2_eap_started && +- !data->phase2_eap_success) { ++ if (!peap_phase2_sufficient(sm, data)) { + wpa_printf(MSG_DEBUG, "EAP-PEAP: Phase 2 " + "Success used to indicate success, " + "but Phase 2 EAP was not yet " +@@ -1199,8 +1232,9 @@ static struct wpabuf * eap_peap_process(struct eap_sm *sm, void *priv, + static bool eap_peap_has_reauth_data(struct eap_sm *sm, void *priv) + { + struct eap_peap_data *data = priv; ++ + return tls_connection_established(sm->ssl_ctx, data->ssl.conn) && +- data->phase2_success; ++ data->phase2_success && data->phase2_auth != ALWAYS; + } + + +diff --git a/src/eap_peer/eap_tls_common.c b/src/eap_peer/eap_tls_common.c +index c1837db..a53eeb1 100644 +--- a/src/eap_peer/eap_tls_common.c ++++ b/src/eap_peer/eap_tls_common.c +@@ -239,6 +239,12 @@ static int eap_tls_params_from_conf(struct eap_sm *sm, + + sm->ext_cert_check = !!(params->flags & TLS_CONN_EXT_CERT_CHECK); + ++ if (!phase2) ++ data->client_cert_conf = params->client_cert || ++ params->client_cert_blob || ++ params->private_key || ++ params->private_key_blob; ++ + return 0; + } + +diff --git a/src/eap_peer/eap_tls_common.h b/src/eap_peer/eap_tls_common.h +index 9ac0012..3348634 100644 +--- a/src/eap_peer/eap_tls_common.h ++++ b/src/eap_peer/eap_tls_common.h +@@ -79,6 +79,11 @@ struct eap_ssl_data { + * tls_v13 - Whether TLS v1.3 or newer is used + */ + int tls_v13; ++ ++ /** ++ * client_cert_conf: Whether client certificate has been configured ++ */ ++ bool client_cert_conf; + }; + + +diff --git a/wpa_supplicant/wpa_supplicant.conf b/wpa_supplicant/wpa_supplicant.conf +index 6619d6b..d63f73c 100644 +--- a/wpa_supplicant/wpa_supplicant.conf ++++ b/wpa_supplicant/wpa_supplicant.conf +@@ -1321,6 +1321,13 @@ fast_reauth=1 + # * 0 = do not use cryptobinding (default) + # * 1 = use cryptobinding if server supports it + # * 2 = require cryptobinding ++# 'phase2_auth' option can be used to control Phase 2 (i.e., within TLS ++# tunnel) behavior for PEAP: ++# * 0 = do not require Phase 2 authentication ++# * 1 = require Phase 2 authentication when client certificate ++# (private_key/client_cert) is no used and TLS session resumption was ++# not used (default) ++# * 2 = require Phase 2 authentication in all cases + # EAP-WSC (WPS) uses following options: pin= or + # pbc=1. + # +-- +2.45.2 + diff --git a/SPECS/wpa_supplicant/wpa_supplicant.spec b/SPECS/wpa_supplicant/wpa_supplicant.spec index 53ac7da59c7..ab1493470d5 100644 --- a/SPECS/wpa_supplicant/wpa_supplicant.spec +++ b/SPECS/wpa_supplicant/wpa_supplicant.spec @@ -1,13 +1,14 @@ Summary: WPA client Name: wpa_supplicant Version: 2.10 -Release: 1%{?dist} +Release: 2%{?dist} License: BSD Vendor: Microsoft Corporation Distribution: Azure Linux Group: Applications/Communications URL: https://w1.fi Source0: https://w1.fi/releases/%{name}-%{version}.tar.gz +Patch0: CVE-2023-52160.patch BuildRequires: libnl3-devel BuildRequires: openssl-devel Requires: libnl3 @@ -95,6 +96,9 @@ EOF %{_sysconfdir}/wpa_supplicant/wpa_supplicant-wlan0.conf %changelog +* Wed Feb 03 2025 Sreeniavsulu Malavathula - 2.10-2 +- Patch to fix CVE-2023-52160. + * Wed Jan 26 2022 Neha Agarwal - 2.10-1 - Upgrade to v2.10 to resolve CVE-2022-23303 and CVE-2022-23304. - License verified.