diff --git a/examples/BasicSend_v2_Heltec_Lora/BasicSend_v2_Heltec_Lora.ino b/examples/BasicSend_v2_Heltec_Lora/BasicSend_v2_Heltec_Lora.ino
new file mode 100644
index 0000000..5a6b32c
--- /dev/null
+++ b/examples/BasicSend_v2_Heltec_Lora/BasicSend_v2_Heltec_Lora.ino
@@ -0,0 +1,118 @@
+#include <IridiumSBD.h>
+
+/*
+   BasicSend
+   you can't use U0TXD and U0RXD becuase they are used for the programming of the board, quite why Heltec brought these pins
+   out to the edge connector I don't know, I suppose to allow an external programmer, who knows.
+   The pins that are free are as follows:
+   GPIO-17
+   GPIO-2
+   GPIO-22
+   GPIO-23
+   GPIO-0
+   GPIO-12
+   GPIO-13
+   GPIO-25
+
+   All other spare pins are inputs only, best avoided.
+
+   I've modified the code here accordingly to use (say) 12 and 13
+
+   Wiring:
+   Heltec Pin 12 (rxpin) --- Iridium txdata pin
+   Heltec Pin 13 (txpin) --- Iridium rxdata pin
+
+*/
+
+#define IridiumSerial Serial2
+#define DIAGNOSTICS false// Change this to see diagnostics
+#define rxpin 12
+#define txpin 13
+
+// Declare the IridiumSBD object
+IridiumSBD modem(IridiumSerial);
+
+void setup()
+{
+  int signalQuality = -1;
+  int err;
+
+  // Start the console serial port
+  Serial.begin(1500);
+  while (!Serial);
+
+  // Start the serial port connected to the satellite modem
+  Serial2.begin(9600, SERIAL_8N1, rxpin, txpin, false); // false means normal data polarity so steady state of line = 0, true means staedy state = high.
+
+  // Begin satellite modem operation
+  Serial.println("Starting modem...");
+  err = modem.begin();
+  if (err != ISBD_SUCCESS)
+  {
+    Serial.print("Modem begin failed: error ");
+    Serial.println(err);
+    if (err == ISBD_NO_MODEM_DETECTED)
+      Serial.println("No modem detected: check wiring.");
+    return;
+  }
+
+  // Example: Print the firmware revision
+  char version[12];
+  err = modem.getFirmwareVersion(version, sizeof(version));
+  if (err != ISBD_SUCCESS)
+  {
+    Serial.print("FirmwareVersion failed: error ");
+    Serial.println(err);
+    return;
+  }
+  Serial.print("Firmware Version is ");
+  Serial.print(version);
+  Serial.println(".");
+
+  // Example: Test the signal quality.
+  // This returns a number between 0 and 5.
+  // 2 or better is preferred.
+  err = modem.getSignalQuality(signalQuality);
+  if (err != ISBD_SUCCESS)
+  {
+    Serial.print("SignalQuality failed: error ");
+    Serial.println(err);
+    return;
+  }
+
+  Serial.print("On a scale of 0 to 5, signal quality is currently ");
+  Serial.print(signalQuality);
+  Serial.println(".");
+
+  // Send the message
+  Serial.print("Trying to send the message.  This might take several minutes.\r\n");
+  err = modem.sendSBDText("Hello, world!");
+  if (err != ISBD_SUCCESS)
+  {
+    Serial.print("sendSBDText failed: error ");
+    Serial.println(err);
+    if (err == ISBD_SENDRECEIVE_TIMEOUT)
+      Serial.println("Try again with a better view of the sky.");
+  }
+
+  else
+  {
+    Serial.println("Hey, it worked!");
+  }
+}
+
+void loop()
+{
+}
+
+#if DIAGNOSTICS
+void ISBDConsoleCallback(IridiumSBD *device, char c)
+{
+  Serial.write(c);
+}
+
+void ISBDDiagsCallback(IridiumSBD *device, char c)
+{
+  Serial.write(c);
+}
+#endif
diff --git a/examples/BasicSend_v2_TTGO_Boards/BasicSend_v2_TTGO_Boards.ino b/examples/BasicSend_v2_TTGO_Boards/BasicSend_v2_TTGO_Boards.ino
new file mode 100644
index 0000000..c3f8149
--- /dev/null
+++ b/examples/BasicSend_v2_TTGO_Boards/BasicSend_v2_TTGO_Boards.ino
@@ -0,0 +1,120 @@
+#include <IridiumSBD.h>
+
+/*
+   BasicSend
+
+   This sketch sends a "Hello, world!" message from the satellite modem.
+   If you have activated your account and have credits, this message
+   should arrive at the endpoints you have configured (email address or
+   HTTP POST).
+
+   The TTGO T Beam unit does not have many if any spare GPIO ports. Most of the 
+   ports are already in use for Esp32, Lora and GPS. So this only leaves you 
+
+   Pins:
+   GPIO-13
+   GPIO-25
+
+   All other spare pins are inputs only, best avoided.
+
+   I've modified the code here accordingly to use (say) 12 and 13
+
+   Wiring:
+   TTGO Pin 13 (rxpin) --- Iridium txdata pin
+   TTGO Pin 25 (txpin) --- Iridium rxdata pin
+
+*/
+
+#define IridiumSerial Serial2
+#define DIAGNOSTICS false// Change this to see diagnostics
+#define rxpin 13
+#define txpin 25
+
+// Declare the IridiumSBD object
+IridiumSBD modem(IridiumSerial);
+
+
+void setup()
+{
+  int signalQuality = -1;
+  int err;
+
+  // Start the console serial port
+  Serial.begin(1500);
+  while (!Serial);
+
+  // Start the serial port connected to the satellite modem
+  Serial2.begin(9600, SERIAL_8N1, rxpin, txpin, false); // false means normal data polarity so steady state of line = 0, true means staedy state = high.
+
+  // Begin satellite modem operation
+  Serial.println("Starting modem...");
+  err = modem.begin();
+  if (err != ISBD_SUCCESS)
+  {
+    Serial.print("Modem begin failed: error ");
+    Serial.println(err);
+    if (err == ISBD_NO_MODEM_DETECTED)
+      Serial.println("No modem detected: check wiring.");
+    return;
+  }
+
+  // Example: Print the firmware revision
+  char version[12];
+  err = modem.getFirmwareVersion(version, sizeof(version));
+  if (err != ISBD_SUCCESS)
+  {
+    Serial.print("FirmwareVersion failed: error ");
+    Serial.println(err);
+    return;
+  }
+  Serial.print("Firmware Version is ");
+  Serial.print(version);
+  Serial.println(".");
+
+  // Example: Test the signal quality.
+  // This returns a number between 0 and 5.
+  // 2 or better is preferred.
+  err = modem.getSignalQuality(signalQuality);
+  if (err != ISBD_SUCCESS)
+  {
+    Serial.print("SignalQuality failed: error ");
+    Serial.println(err);
+    return;
+  }
+
+  Serial.print("On a scale of 0 to 5, signal quality is currently ");
+  Serial.print(signalQuality);
+  Serial.println(".");
+
+  // Send the message
+  Serial.print("Trying to send the message.  This might take several minutes.\r\n");
+  err = modem.sendSBDText("Hello, world!");
+  if (err != ISBD_SUCCESS)
+  {
+    Serial.print("sendSBDText failed: error ");
+    Serial.println(err);
+    if (err == ISBD_SENDRECEIVE_TIMEOUT)
+      Serial.println("Try again with a better view of the sky.");
+  }
+
+  else
+  {
+    Serial.println("Hey, it worked!");
+  }
+}
+
+void loop()
+{
+}
+
+#if DIAGNOSTICS
+void ISBDConsoleCallback(IridiumSBD *device, char c)
+{
+  Serial.write(c);
+}
+
+void ISBDDiagsCallback(IridiumSBD *device, char c)
+{
+  Serial.write(c);
+}
+#endif
diff --git a/examples/Time/BasicSend_v2_Heltec__Lora/BasicSend_v2_Heltec__Lora.ino b/examples/Time/BasicSend_v2_Heltec__Lora/BasicSend_v2_Heltec__Lora.ino
new file mode 100644
index 0000000..06fe58a
--- /dev/null
+++ b/examples/Time/BasicSend_v2_Heltec__Lora/BasicSend_v2_Heltec__Lora.ino
@@ -0,0 +1,78 @@
+#include <IridiumSBD.h>
+
+/*
+   BasicSend
+
+   This sketch sends a "Hello, world!" message from the satellite modem.
+   If you have activated your account and have credits, this message
+   should arrive at the endpoints you have configured (email address or
+   HTTP POST).
+
+   Assumptions
+
+   The sketch assumes an Arduino Mega or other Arduino-like device with
+   multiple HardwareSerial ports.  It assumes the satellite modem is
+   connected to Serial3.  Change this as needed.  SoftwareSerial on an Uno
+   works fine as well.
+
+   you can't use U0TXD and U0RXD becuase they are used for the programming of the board, quite why Heltec brought these pins
+   out to the edge connector I don't know, I suppose to allow an external programmer, who knows.
+   The pins that are free are as follows:
+   GPIO-17
+   GPIO-2
+   GPIO-22
+   GPIO-23
+   GPIO-0
+   GPIO-12
+   GPIO-13
+   GPIO-25
+
+   All other spare pins are inputs only, best avoided.
+
+   I've modified the code here accordingly to use (say) 12 and 13
+
+   Wiring:
+   Heltec Pin 12 (rxpin) --- Iridium txdata pin
+   Heltec Pin 13 (txpin) --- Iridium rxdata pin
+
+*/
+
+#define IridiumSerial Serial2
+#define DIAGNOSTICS false// Change this to see diagnostics
+#define RXD2 2
+#define TXD2 0
+
+// Declare the IridiumSBD object
+IridiumSBD modem(IridiumSerial);
+
+
+void setup()
+{
+  Serial.begin(19200);
+  Serial.println("Starting setup...");
+
+  int signalQuality = -1;
+        int err;
+
+  // Start the serial port connected to the satellite modem
+  Serial.println("Starting satellite serial connection (swSer)");
+  Serial2.begin(19200, SERIAL_8N1, RXD2, TXD2);
+
+  // Begin satellite modem operation
+  Serial.println("Starting modem...");
+  err = modem.begin();
+  Serial.print("modem: ");
+  Serial.println(err);
+
+  if (err != ISBD_SUCCESS)
+  {
+    Serial.print("Begin failed: error ");
+    Serial.println(err);
+    if (err == ISBD_NO_MODEM_DETECTED)
+      Serial.println("No modem detected: check wiring.");
+    return;
+  }
+}
+
+void loop() {
+}