Saturn Controller Issues

[Vorenu5]

I've tested v1.05 Combo 12 Gen+Sat mode with 4 Saturn controllers with varying results:

1. MK-80100: Working as expected
2. MK-80116: Not detected by Reflex (Working on real Saturn console)
3. Retro-bit Wired: Buttons presses are detected, with phantom button presses on B3 & B6 which coincide with the entire button display on the Reflex flashing on and off (Working on real Saturn console)
4. Retro-bit Wireless: Similar to wired version except with longer phantom button presses on B3 & B6 with entire button display on the Reflex flashing at a higher rate (Working on real Saturn console)

I'm open to more testing if needed.

[Vorenu5]

Update: After a bit of wiggling and seemingly getting the controller connector sitting at just the right angle, my MK-80116 is detected and working. Cleaning the controller connector contact points has not had an effect on the reliability of detection. I had a similar connector connection issue with some 3-button Genesis controllers as well but I won't bother creating a separate issue for something not seemingly software related.

[misteraddons]

Yeah, Saturn connectors seem really sensitive. I've hand tested each Saturn adapter. I suspect there's variation from controller to controller that's hard to account for :(

[Vorenu5]

I agree with the sensitivity of the connectors. Is there a possibility the behavior I'm experiencing with the Retro-bit controllers is a firmware issue?

[daunator]

I can confirm the Retro-bit controllers issue. I am experiencing the same phantom button presses with the Retro-bit Wired controller.

[misteraddons]

Sadly, Retro-Bit does weird things with the controller protocols. The Retro-bit controllers don't work with Daemonbyte either without inserting a massive delay.