Xeno Not Working

[RatterOf]

Whenever I build the file then open it myself, I pop up on the client thing. But lets say another person does it they dont show.

[NFS11]

you problably forgot port forwarding. check issue #15. hope this clears it up.

[cipiripi84]

you problably forgot port forwarding. check issue #15. hope this clears it up.

Hi there, please do you have time to help me set it up (I got almost everything ) I will appreciate it so much. Do you have any telegram by any chance? I will send you a beer in paypal

[NFS11]

@cipiripi84 i dont have telegram, sorry. you dont need to pay me ill help for free. do you have discord or smth?

[cipiripi84]

@cipiripi84 i dont have telegram, sorry. you dont need to pay me ill help for free. do you have discord or smth?

Thank you so much for a quick reply. Unfortunately I dont use discord. I will try explain here a few things if you could help me out, once again thank you so so much.

[NFS11]

@cipiripi84 alright, explain what you need help with and ill try my best

[cipiripi84]

Before I came to this forum, I was able to test out Xeno on my machine on local network somehow it was successful. I followed some tutorial on youtube regarding portmap.io and I was able to see myself in the client area.
What I want to test out now is, I have another computer which I am thinking to connect to my mobile hotspot to serve as I am connecting outside my local network (different IP of course) like if I am sending it to my friend, if that makes sense? if you understand.

Then I found this forum and your helpful replies regarding IPs, port forwarding and what we need/dont.
I opened port 2137 in my router settings, also made inbound rule and tested in listener option also in canyouseeme.org and it show sport open. I checked and found out that I am not behind CGNAT and that my IP is dynamic (it starts with 109....) You said that in that case, all we need is DuckDNS? I added domain in DuckDNS example.duckdns.org. My next step is to copy that domain address from DuckDNS and paste it in IP area in builder, correct?

One issue I am facing is that my windows virus and threat protection is detecting Xeno each time I am trying to build an exe. I added exclusion in the windows virus protection but it stills popping out as malware and blocking me to create a builder. AV is completely turned off. I checked in windows settings and it seems like there is no way to permanently shut off real time system protection, it keeps turning on automatically.

[NFS11]

@cipiripi84 go disable real time protection and see if it helps. you can find this in windows defender virus and threat protection. duckdns doesnt work with rats. if you want to use a ddns use dynv6. i use dynv6 and it works for me. idk why but before it did now duckdns isnt working for some reason. real time protection is temporary but it lasts for about 15 minutes i think so more than enough time to test and send to someone. anyway, with your ddns, yes. you paste the domain into ip section. remember to add an inbound rule in wf.msc since loads of people forget this. good luck, let me know if you need any more help.

[cipiripi84]

I followed your suggestion regarding dynv6. Opening the exe on other computer does nothing in the Xeno client area. No new client detected. In dynv6 I copied example.dns.army to builder. Not sure if I need to do anything else. Do you have maybe some other DNS service that I could try? Sorry for disfturbing but thank you

[NFS11]

ok go to "my zones"
you should now see this:

then click on your domain
then click "edit zone"

now you should see:

ignore ipv6. update ipv4 and save changes. then, try again.

[NFS11]

hope it works for you

[cipiripi84]

Thanks a lot. will try!

[NFS11]

@cipiripi84 good luck

[cipiripi84]

@cipiripi84 go disable real time protection and see if it helps. you can find this in windows defender virus and threat protection. duckdns doesnt work with rats. if you want to use a ddns use dynv6. i use dynv6 and it works for me. idk why but before it did now duckdns isnt working for some reason. real time protection is temporary but it lasts for about 15 minutes i think so more than enough time to test and send to someone. anyway, with your ddns, yes. you paste the domain into ip section. remember to add an inbound rule in wf.msc since loads of people forget this. good luck, let me know if you need any more help.

When you said create inbound rule in wf.msc, you meant for the desired port right? (btw I created inbound and outbound tcp port rule)
I am killing myself over here and still cant make it to work... Locally everything is fine but outside the network it just shows nothing in client area, cant connect. Port is open, I use dynv6 dns but it just cant make it to work. Not sure what else to try gosh

[NFS11]

@cipiripi84 ok so have you checked your listener tab and added the port there? also if it asks what networks to access select public and private and it should work then

[cipiripi84]

@cipiripi84 ok so have you checked your listener tab and added the port there? also if it asks what networks to access select public and private and it should work then

Hi again. You know what is strange.. I just tried with Quasar that can be also found here in github, and it worked right away. I used same port, same steps and everything. I even reinstalled Xeno and still shows no connections when payload is opened.. Very strange situation

[NFS11]

@cipiripi84 in that case xeno may not support ddns. I have one solution however. until xeno gets an update supporting ddns use asyncrat. not 100% like xeno but I say it should be good. dynv6 works on this. the dev discontinued it but it still works well for me https://github.com/NYAN-x-CAT/AsyncRAT-C-Sharp

[cipiripi84]

@cipiripi84 in that case xeno may not support ddns. I have one solution however. until xeno gets an update supporting ddns use asyncrat. not 100% like xeno but I say it should be good. dynv6 works on this. the dev discontinued it but it still works well for me https://github.com/NYAN-x-CAT/AsyncRAT-C-Sharp

Gotcha. Thanks so much

[NFS11]

@cipiripi84 has it worked now?

[cipiripi84]

@cipiripi84 has it worked now?

Hey NFS! Nah man, I killed myself trying and trying but nothing. I followed your advice regarding the AsyncRAT and it worked right away. Really not sure what is the issue with the Xeno RAT. Wanted to try it so much but it is what it is.
You have been so helpful and thanks once again for checking up on my issue, dont know what to tell you, wish you all the best always because you are so helpful wanting to help and all...Thanks again for everything

[NFS11]

@cipiripi84 yeah 100% xeno doesnt support ddns. well hope everything goes well for your asyncrat isnt really the best rat but it does well enough. youre welcome!

[cipiripi84]

@cipiripi84 yeah 100% xeno doesnt support ddns. well hope everything goes well for your asyncrat isnt really the best rat but it does well enough. youre welcome!

Thank you! Have a great weekend