The source can be obtained via git from https://github.com/mpounsett/nagiosplugin.git:
git clone https://github.com/mpounsett/nagiosplugin.git
This package supports installation in a virtualenv:
python3 -m venv . pip install -e .
This project uses the Git-flow workflow, approximately as laid out by Vincent Driessen in 2010. New development should be done in feature branches, which are branched off of the develop branch. PRs should be sent to upstream:develop.
Consider whether your change updates or fixes any existing issues. Include the appropriate "fixes" or "updates" entry in your PR description so that the issue is updated. If your change does not reference an existing issue, consider creating an issue to link it to.
The project uses PEP8 as its style guide. All changes should be checked against PEP8 before committing, and commits MUST conform to PEP8 before sending a PR. PEP8 tests can be run with the tox -e flake8 command (see Tests below for details on setting up the tox environment). PRs that fail PEP8 compliance will be refused.
Note that, at present, much of the old codebase gets warnings related to the pylint and pydocstyle tests. Your changes must not introduce any new warnings from these tests.
If your change is a new feature, or otherwise alters the behaviour of nagiosplugin, update the relevant section of the documentation and include that in your PR.
nagiosplugin tests are run by tox, which is configured to expect all of the supported python versions to be present. The easiest way to accomplish this is by installing and using pyenv.
Once you have pyenv set up, make sure you have each of the supported versions of python specified by the envlist in tox.ini. This will likely look something like:
pyenv install 2.7.18 pyenv install 3.4.10 pyenv install 3.5.10 pyenv install 3.6.15 pyenv install 3.7.12 pyenv install 3.8.12 pyenv install 3.9.9 pyenv install 3.10.1 pyenv global 3.10.1 3.9.9 3.8.12 3.7.12 3.6.15 3.5.10 3.4.10 2.7.18 system
Install test dependencies:
pip install -r requirements_test.txt
After doing so, run the unit tests:
tox
To limit tests to a particular python environment:
tox -e py37
Run only PEP8 linting tests:
tox -e flake8
nagiosplugin also includes support for test coverage reports. Coverage reports are updated automatically by tox. Open htmlcov/index.html to see coverage reports.
You may run the supplied examples with the local interpreter:
python3 nagiosplugin/examples/check_load.py
The documentation depends on Sphinx. Install the necessary dependencies, and then build the documentation:
pip install -r requirements_docs.txt make docs
HTML documentation will be built and installed in doc/_build/html/. You can read the documentation by opening doc/_build/html/index.html.
This information will be unnecessary for most contributors. It is only relevant to those actually making releases.
nagiosplugin obeys the semantic version numbering specification published on SemVer, adapted slightly to be PEP 440 compliant.
Instructions below are for a hypothetical 0.1.2 release. Make sure you use the correct version numbers for your release, and don't copy and paste the below examples.
Begin by making sure you have the build prerequisites installed:
pip install -r requirements_build.txt
Create a release branch from develop:
git checkout develop git checkout -b release/0.1.2
Check that all tests pass. Apply hotfixes as necessary to pass all tests before continuing.
Update the version number in nagiosplugin/version.py, and update the version release date in the HISTORY.txt file:
sed -i '' -e 's/\(__VERSION__ =\).*/\1 "0.1.2"/' nagiosplugin/version.py sed -i '' -e 's/0.1.2 (unreleased)/0.1.2 (2019-11-07)/' HISTORY.txt
You may need to update the HISTORY.txt file with additional changes. You can get a list of commits since the last release by generating a reverse log, which you can edit down to just a list of relevant changes:
git log --reverse --no-merges 0.1.1... > new-changes.txt
Commit the updated history and version files, making sure both of the file changes are in the same commit. For a new version 0.1.2:
git stage HISTORY.txt nagiosplugin/version.py git commit -m "Preparing release 0.1.2"
Merge the release into the main branch and tag the release:
git checkout main git merge release/0.1.2 git tag 0.1.2 git push git push --tags
Build the nagiosplugin distribution for PyPi:
python3 setup.py sdist bdist_wheel
Check the contents of the packages in dist/ to ensure they contain all of the expected files.
Test your package prior to uploading:
twine check dist/dist/nagiosplugin-0.1.2.tar.gz
Do a test upload with TestPyPi:
twine upload --repository-url https://test.pypi.org/legacy/ dist/*
Check on https://test.pypi.org/nagiosplugin that the package metadata looks correct. If everything is fine, upload the release:
twine upload dist/*
Merge the release back into develop and then delete the release branch:
git checkout develop git merge release/0.1.2 git push git branch -d release/0.1.2
Go to https://readthedocs.io/ and ensure the new stable and dev releases are available.