configure.me

# Variables cannot begin with a "-" character.

USER="admin"
PASS="adminpass"
URL="http://192.168.8.1"
DIR="/dev/shm/tmp/lte" # TMP dir, to save the life of the SD card. Feel free to replace.
ADMINPHONE="+12345678901" # Default destination for outbound SMS
#ADMINMAIL="" # Deprecated (as it becomes "safer" but less usable), RIP
SMSPWD="YubiKeyC00l" # No intended for production, but OK for testing (password to run commands by SMS)

# Telegram Bot https://core.telegram.org/bots 
TTOKEN="123456789:ABC-DEF1234ghIkl-zyx57W2v1u123ew11" # Change it to Your own
TCHATID="123456789" # Change it to Your own

# YubiKey Auth server (local!) LTE sometimes disconnects from the network by design. 
YUBIKEYURL="http://127.0.0.1:8000/wsapi/2.0/verify"
YUBIKEY_ENABLED="0" # Enabled 1, Disabled 0, if enabled - "SMSPWD" inutile. 

# "Numberless" satellite messenger
# 1) Set up your personal Check-In pattern as shown in the example. If you don't know what it is, this is not the best place to start.
# 2) Add your SIM card's phone number to the list of recipients of Check-In messages in your satellite messenger.
# 3) Send Check-In from Your satellite messenger.
# 4) Confirm that this is your Chechk-In by executing any authorized OTP command from your messenger, for example "cccjgjgkhcbbirdrfdnlnghhfgrtnnlgedjlftrbdeut lte uptime"
# Until the confirmation procedure is completed, no any SMS will be sent to the satellite messenger. We don't know that this is exactly Your number.

SATUNSAFE="0" # If set to 1, will forward all messages without authorization, You will pay for all spam and errors.
CHECKIN=" - John Doe" # Each SAT Check-In SMS from your device has your own personalized fingerprint (cannot begin with a "-" character like and all other variables).

# The data below is updated automatically, change manually only if You understand what You are doing.
CHECKINNUM="not defined"
SATSMS="not defined"