Cvars

New and Modified Cvars

Name:	com_busyWait
Values:	"0", "1"
Default:	"0"
Description:	Enable / Disable old "busy" game loop using 100% CPU time.

Client-Side

Name:	cl_autoDemo
Values:	"0", "1"
Default:	"0"
Description:	When enabled, starts recording a demo automatically on joining a server. Current and single last demo are stored in demos/LastDemo directory.

Name:	cl_autoDemoFormat
Values:	Format String
Default:	"%t_%m"
Description:	Filename format for demos saved with saveDemo command. Valid format tokens are: %d: local date %m: map %n: custom name supplied as an argument to saveDemo command %p: player name %t: sequence of server timestamps when saveDemo was executed %%: % character

Name:	cl_aviFrameRate
Values:	Integer from 1 to 1000
Default:	"30"
Description:	Frame rate for recording with video command.

Name:	cl_aviMotionJpeg
Values:	"0", "1"
Default:	"1"
Description:	Record AVI using Motion JPEG video compression format. Much smaller file size for little quality loss.

Name:	cl_aviMotionJpegQuality
Values:	Integer from 0 to 100
Default:	"90"
Description:	JPEG quality used by AVI Motion JPEG compression. Lower values result in worse quality and smaller file size.

Name:	cl_drawRecording
Values:	"0", "1", "2"
Default:	"1"
Description:	0: don't draw any demo recording indicator 1: draw filename and demo size near the top of the screen 2: draw red dot in the bottom left corner

Name:	con_height
Values:	Decimal > 0
Default:	"0.5"
Description:	Fraction of a screen which should be occupied by in-game console.

Name:	con_scale
Values:	Decimal > 0
Default:	"1"
Description:	Scale console font relative to it's original size.

Name:	con_timestamps
Values:	"0", "1"
Default:	"1"
Description:	Draw local timestamps in console and condump output.

Name:	mv_allowDownload
Values:	"0", "1"
Default:	"1"
Description:	Enable / Disable Downloads. If you turn this off, the download popup will not appear and you will not be asked wether a file should be downloaded.

Name:	mv_consoleShiftRequirement
Values:	"0", "1", 2
Default:	"1"
Description:	0: shift is not required to open/close the console. 1: shift is required to open the console but not to close it. 2: shift is required to both, open and to close the console.

Name:	mv_nameShadows
Values:	"0", "1", 2
Default:	"2"
Description:	0: no name shadows at all. 1: name shadows enabled on every version. 2: name shadows enabled in 1.02 mode.

Name:	mv_menuOverride
Values:	"0", "1"
Default:	"0"
Description:	Allow loading custom UI modules in the main menu. Beware! This gives full control over downloaded content to the mod, there will be no download popup. Use only for testing.

Name:	mv_slowrefresh
Values:	Integer >= 0
Default:	"3"
Description:	Number of requests on a serverlist refresh sent per second to servers in the list. Some providers filter packets on a high number of requests to a lot of different IP addresses in a short time. (e.g. two major ISPs in Germany: "Kabel Deutschland", "Kabel BW").

Name:	r_consoleFont
Values:	"0", "1", "2"
Default:	"1"
Description:	Font used in console, timer, message input field and other places: 0: Original charsgrid_med 1: Code New Roman 2: M+ 1M

Name:	r_dynamicGlow
Values:	"0", "1"
Default:	"0"
Description:	Enable / Disable dynamic glow effect know from JK:JA.

Name:	r_ext_multisample
Values:	"0", "2", "4", "8", "16"
Default:	"0"
Description:	Multisample anti-aliasing. May not work on all machines.

Name:	r_ext_texture_filter_anisotropic
Values:	"0", "2", "4", "8", "16"
Default:	"2"
Description:	Anisotropic filtering level. Higher values increase image quality with little performance loss.

Name:	r_fontSharpness
Values:	Decimal >= 0
Default:	"1"
Description:	Relative font sharpness (doesn't affect console font). 0: Always use original low-res fonts 1: Best quality (in fau's opinion)

Name:	r_gammamethod
Values:	"0", "1", "2"
Default:	"2"
Description:	Method for applying gamma correction. Keep in mind that using non-functional gamma method disables not only r_gamma, but also r_overbrightbits. 0: Pre-processing. Causes washed out colors. Use as last resort. 1: Hardware gamma. Works only in fullscreen. 2: Post-processing. Works in both fullscreen and windowed.

Name:	r_saberGlow
Values:	"0", "1"
Default:	"1"
Description:	Enable / Disable dynamic glow on saber shaders. Turn off if it breaks your custom saber model.

Name:	r_textureLODBias
Values:	Decimal
Default:	"0"
Description:	Adjust OpenGL texture Level of Detail bias. Useful for some low quality video drivers. Small negative values (eg "-0.2") can help with distant textures appearing blurry.

Server-Side

Name:	mv_serverversion
Valid:	"auto", "1.04", "1.03", "1.02"
Default:	"1.04"
Description:	Decides which gameversion the server will run on. "auto" will host a 1.04 server if assets5.pk3 is found, 1.03 if assets2.pk3 is available and if only assets0.pk3 and assets1.pk3 can be found it will host a 1.02 server. Make sure you have only mods compatible with the hosted gameversion in your base/mod directory. The dedicated server expects you to know what you are doing.

Name:	mv_httpdownloads
Valid:	"0", "1"
Default:	"0"
Description:	Switches http downloads on and off.

Name:	mv_httpserverport
Valid:	0-65535 (TCP Port), Any URL (http://...)
Default:	"0"
Description:	If a number is provided it decides on which TCP port the builtin HTTP-Server will listen on. If set to zero it will automatically choose a port between 18200 and 18215, trying every single one till it finds an unused port. Make sure that this port is opened in your Firewall / NAT. Since JK2MV 1.1 external HTTP Servers are supported. The URL should point to the GameData directory of your file server. Note that clients also need at least JK2MV 1.1 in case you are using a URL. Older JK2MV versions will not detect the availability of HTTP Downloads in this case.

Name:	mv_fixnamecrash
Valid:	"0", "1"
Default:	"1"
Description:	Blocks the use of chars from the extended ASCII table which can cause a crash if used correctly.

Name:	mv_fixforcecrash
Valid:	"0", "1"
Default:	"1"
Description:	Blocks the use of malformed forceconfig strings which can cause a crash if used correctly.

Name:	mv_fixgalaking
Valid:	"0", "1"
Default:	"1"
Description:	Blocks the use of "galak_mech" as a playermodel on the serverside so legacy clients will not crash. Only useful in 1.02 mode.

Name:	mv_fixbrokenmodels
Valid:	"0", "1"
Default:	"1"
Description:	Blocks the use of "kyle/fpls" and "morgan" as a playermodel. These models have invisible parts and thus are some kind of ghosting. Only useful in 1.02 mode.

Name:	mv_fixturretcrash
Valid:	"0", "1"
Default:	"1"
Description:	Removes all blaster missiles from the game before hitting the engine limit to prevent players from crashing a server with the turret/sentry.

Name:	mv_blockchargejump
Valid:	"0", "1"
Default:	"1"
Description:	Blocks a hack which can be used to jump higher then normally possible.

Name:	mv_blockspeedhack
Valid:	"0", "1"
Default:	"1"
Description:	Blocks the speedhack which can be used to run faster.

Name:	mv_fixsaberstealing
Valid:	"0", "1"
Default:	"1"
Description:	Prevents spectators from stealing saber.

Undocumented Cvars

• com_maxfpsMinimized
• com_maxfpsUnfocused
• in_nograb
• mv_apiEnabled (ROM)
• mv_coloredTextShadows
• net_dropsim (dev cvar)
• net_enabled
• r_allowsoftwaregl
• r_convertModelBones
• r_loadSkinsJKA
• r_noborder
• r_centerWindow
• s_sdlBits
• s_sdlSpeed
• s_sdlChannels
• s_sdlDevSamps
• s_sdlMixSamps

Other Changes

• cl_avidemo replaced by cl_aviFrameRate
• cl_conspeed renamed to con_speed