SATA/SAS Expansion interfaces?

[IAMJDA]

I'm trying to write my first devicetype but I'm missing the possibility to add an "Expansion Port" which is Infiniband SFF-8470. Any clue on how to model it?

[danner26]

Hello @IAMJDA, currently you have the following types (see the bottom of this answer). If you need one that is not here, it will need to be requested on the upstream netbox repo and then we can bring it in here. For now you can use other if needed

"virtual", "bridge", "lag", "100base-tx", "1000base-t", "1000base-x-gbic", "1000base-x-sfp", "2.5gbase-t", "5gbase-t", "10gbase-t", 
"10gbase-cx4", "10gbase-x-sfpp", "10gbase-x-xfp", "10gbase-x-xenpak", "10gbase-x-x2", "25gbase-x-sfp28", "40gbase-x-qsfpp",
"50gbase-x-sfp28", "100gbase-x-cfp", "100gbase-x-cfp2", "100gbase-x-cfp4", "100gbase-x-cpak", "100gbase-x-qsfp28",
"200gbase-x-cfp2", "200gbase-x-qsfp56", "400gbase-x-qsfpdd", "400gbase-x-osfp", "ieee802.11a", "ieee802.11g", "ieee802.11n",
"ieee802.11ac", "ieee802.11ad", "ieee802.11ax", "ieee802.15.1", "gsm", "cdma", "lte", "sonet-oc3", "sonet-oc12", "sonet-oc48",
"sonet-oc192", "sonet-oc768", "sonet-oc1920", "sonet-oc3840", "1gfc-sfp", "2gfc-sfp", "4gfc-sfp", "8gfc-sfpp", "16gfc-sfpp",
"32gfc-sfp28", "64gfc-qsfpp", "128gfc-qsfp28", "infiniband-sdr", "infiniband-ddr", "infiniband-qdr", "infiniband-fdr10", "infiniband-fdr",
"infiniband-edr", "infiniband-hdr", "infiniband-ndr", "infiniband-xdr", "t1", "e1", "t3", "e3", "xdsl", "docsis", "cisco-stackwise",
"cisco-stackwise-plus", "cisco-flexstack", "cisco-flexstack-plus", "cisco-stackwise-80", "cisco-stackwise-160", "cisco-stackwise-320",
"cisco-stackwise-480", "juniper-vcp", "extreme-summitstack", "extreme-summitstack-128", "extreme-summitstack-256",
"extreme-summitstack-512", "gpon", "xg-pon", "xgs-pon", "ng-pon2", "epon", "10g-epon", "other"