drm/v3d: Use V3D_SMS registers for power on/off and reset on V3D 7.x

In addition to the standard reset controller, V3D 7.x requires configuring
the V3D_SMS registers for proper power on/off and reset. Add the new
registers to `v3d_regs.h` and ensure they are properly configured during
device probing, removal, and reset.

This change fixes GPU reset issues on the Raspberry Pi 5 (BCM2712).
Without exposing these registers, a GPU reset causes the GPU to hang,
stopping any further job execution and freezing the desktop GUI. The same
issue occurs when unloading and loading the v3d driver.

Link: #6660
Reviewed-by: Iago Toral Quiroga <[email protected]>
Signed-off-by: Maíra Canal <[email protected]>

Author: mairacanal

Diff for: drivers/gpu/drm/v3d/v3d_drv.c

@@ -485,6 +485,8 @@ static void v3d_platform_drm_remove(struct platform_device *pdev)
 	dma_free_wc(v3d->drm.dev, 4096, v3d->mmu_scratch,
 		    v3d->mmu_scratch_paddr);
 
+	v3d_power_off_sms(v3d);
+
 	clk_disable_unprepare(v3d->clk);
 }
 

Diff for: drivers/gpu/drm/v3d/v3d_drv.h

@@ -118,6 +118,7 @@ struct v3d_dev {
 	void __iomem *core_regs[3];
 	void __iomem *bridge_regs;
 	void __iomem *gca_regs;
+	void __iomem *sms_regs;
 	struct clk *clk;
 	struct delayed_work clk_down_work;
 	unsigned long clk_up_rate, clk_down_rate;
@@ -274,6 +275,15 @@ to_v3d_fence(struct dma_fence *fence)
 #define V3D_GCA_READ(offset) readl(v3d->gca_regs + offset)
 #define V3D_GCA_WRITE(offset, val) writel(val, v3d->gca_regs + offset)
 
+#define V3D_SMS_IDLE				0x0
+#define V3D_SMS_ISOLATING_FOR_RESET		0xa
+#define V3D_SMS_RESETTING			0xb
+#define V3D_SMS_ISOLATING_FOR_POWER_OFF	0xc
+#define V3D_SMS_POWER_OFF_STATE		0xd
+
+#define V3D_SMS_READ(offset) readl(v3d->sms_regs + (offset))
+#define V3D_SMS_WRITE(offset, val) writel(val, v3d->sms_regs + (offset))
+
 #define V3D_CORE_READ(core, offset) readl(v3d->core_regs[core] + offset)
 #define V3D_CORE_WRITE(core, offset, val) writel(val, v3d->core_regs[core] + offset)
 
@@ -552,6 +562,7 @@ struct dma_fence *v3d_fence_create(struct v3d_dev *v3d, enum v3d_queue queue);
 /* v3d_gem.c */
 int v3d_gem_init(struct drm_device *dev);
 void v3d_gem_destroy(struct drm_device *dev);
+void v3d_reset_sms(struct v3d_dev *v3d);
 void v3d_reset(struct v3d_dev *v3d);
 void v3d_invalidate_caches(struct v3d_dev *v3d);
 void v3d_clean_caches(struct v3d_dev *v3d);

Diff for: drivers/gpu/drm/v3d/v3d_gem.c

@@ -105,6 +105,22 @@ v3d_reset_v3d(struct v3d_dev *v3d)
 	v3d_init_hw_state(v3d);
 }
 
+void
+v3d_reset_sms(struct v3d_dev *v3d)
+{
+	if (v3d->ver < V3D_GEN_71)
+		return;
+
+	V3D_SMS_WRITE(V3D_SMS_REE_CS, V3D_SET_FIELD(0x4, V3D_SMS_STATE));
+
+	if (wait_for(!(V3D_GET_FIELD(V3D_SMS_READ(V3D_SMS_REE_CS),
+				     V3D_SMS_STATE) == V3D_SMS_ISOLATING_FOR_RESET) &&
+		     !(V3D_GET_FIELD(V3D_SMS_READ(V3D_SMS_REE_CS),
+				     V3D_SMS_STATE) == V3D_SMS_RESETTING), 100)) {
+		DRM_ERROR("Failed to wait for SMS reset\n");
+	}
+}
+
 void
 v3d_reset(struct v3d_dev *v3d)
 {
@@ -120,6 +136,7 @@ v3d_reset(struct v3d_dev *v3d)
 		v3d_idle_axi(v3d, 0);
 
 	v3d_idle_gca(v3d);
+	v3d_reset_sms(v3d);
 	v3d_reset_v3d(v3d);
 
 	v3d_mmu_set_page_table(v3d);

Diff for: drivers/gpu/drm/v3d/v3d_regs.h

@@ -515,4 +515,30 @@
 # define V3D_ERR_VPAERGS                               BIT(1)
 # define V3D_ERR_VPAEABB                               BIT(0)
 
+#define V3D_SMS_REE_CS                                 0x00000
+#define V3D_SMS_TEE_CS                                 0x00400
+# define V3D_SMS_INTERRUPT                             BIT(31)
+# define V3D_SMS_POWER_OFF                             BIT(30)
+# define V3D_SMS_CLEAR_POWER_OFF                       BIT(29)
+# define V3D_SMS_LOCK                                  BIT(28)
+# define V3D_SMS_CLEAR_LOCK                            BIT(27)
+# define V3D_SMS_SVP_MODE_EXIT                         BIT(26)
+# define V3D_SMS_CLEAR_SVP_MODE_EXIT                   BIT(25)
+# define V3D_SMS_SVP_MODE_ENTER                        BIT(24)
+# define V3D_SMS_CLEAR_SVP_MODE_ENTER                  BIT(23)
+# define V3D_SMS_THEIR_MODE_EXIT                       BIT(22)
+# define V3D_SMS_THEIR_MODE_ENTER                      BIT(21)
+# define V3D_SMS_OUR_MODE_EXIT                         BIT(20)
+# define V3D_SMS_CLEAR_OUR_MODE_EXIT                   BIT(19)
+# define V3D_SMS_SEQ_PC_MASK                           V3D_MASK(16, 10)
+# define V3D_SMS_SEQ_PC_SHIFT                          10
+# define V3D_SMS_HUBCORE_STATUS_MASK                   V3D_MASK(9, 8)
+# define V3D_SMS_HUBCORE_STATUS_SHIFT                  8
+# define V3D_SMS_NEW_MODE_MASK                         V3D_MASK(7, 6)
+# define V3D_SMS_NEW_MODE_SHIFT                        6
+# define V3D_SMS_OLD_MODE_MASK                         V3D_MASK(5, 4)
+# define V3D_SMS_OLD_MODE_SHIFT                        4
+# define V3D_SMS_STATE_MASK                            V3D_MASK(3, 0)
+# define V3D_SMS_STATE_SHIFT                           0
+
 #endif /* V3D_REGS_H */