rpi-boot-eeprom-recovery-2024-01-05-2712

Interesting changes since the last release:-

• Fix SFN / LFN issue with overlays directory if there is no LFN over the overlays directory entry
• Fix issue where boot partition parameter passes via PM_RSTS was overwritten before being checked - impacted PINN
• Add a specific error message for RP1 PCIe init failure (RP1 not found)

rpi-boot-eeprom-recovery-2023-12-06-2712

Interesting changes since the last release:-

• Initialise the DWC PHY to enable DWC host+peripheral support under Linux.
  Requires raspberrypi/linux@82069a7
• Force PWM on 3V3 supply if cameras or HATs are connected or if
  power_force_3v3_pwm=1 in config.txt
  Resolves an image quality issue with the GS camera.
• Add support for C(arm_min_freq) < 1500 MHz (must be at >= 200 MHz)
• Manufacturing test updates for DVFS.
• Add autodetect support for PCIe expansion HATs
• Add PCIE_PROBE=1 to the EEPROM config for custom PCIe expansion designs that do not support the upcoming HAT spec. This gives similar behaviour to CM4 where PCIe x1 is enumerated to discover NVMe devices.
• Fix loading of multiple initramfs images that are not 32-bit aligned sizes raspberrypi/firmware#1843
• Kernel load performance improvement - remove a memcpy

rpi-boot-eeprom-recovery-2023-10-30-2712

pieeprom-2023-10-30: 2712: UPG watchdog support + SD reset fixes (default + latest)

• Fix SDIO / WiFi clock-setup for BOOT_ORDER=0xf14
• Fix SD power-on-reset
• Firmware support for improved watchdog driver
• Update DHCP Option97 to be R,P,i,5 on Pi5

rpi-boot-eeprom-recovery-2023-10-18-2712

pieeprom-2023-10-18: 2712: Display autodetect + HAT gpiomap (default + latest)

rpi-boot-eeprom-recovery-2023-01-11-vl805-000138c0

Interesting changes since the last release:-

• Update VL805 to 138C0 - fix for handling of split transactions raspberrypi/linux#5262
• Fix HID error handling with network install #458

rpi-boot-eeprom-recovery-2022-12-07-vl805-000138a1

Merge pull request #457 from timg236/pieeprom-2022-12-07

pieeprom-2022-12-07

rpi-boot-eeprom-recovery-2022-11-25-vl805-000138a1

Interesting changes since the last release:-

• Add [tryboot] conditional statement to autoboot.txt + tryboot_a_b mode
• Support custom OTP mac addresses
• Increase TFTP_MAX_BLOCK_SIZE
• Stop NVMe cleanly
• Fixes for NETCONSOLE parsing and initialisation.
• Long filename support for start_file / fixup_file.
• Secure boot and display debug info on the diagnostics screen.

rpi-boot-eeprom-recovery-2022-04-26-vl805-000138a1

Interesting changes since the last default release:

• Implement network install
• Add support for BOOT_ORDER_HTTP
• Enable the boot partition number to be specified as an EEPROM config property.

rpi-boot-eeprom-recovery-2022-01-25-vl805-000138a1

Interesting changes since the last default release:-

• Support and bug fixes for all Compute Module variants.
• NVMe interoperability fixes
• FAT/GPT fixes and file-system performance improvements.
• Added secure-boot support for industrial applications
• Added ramdisk / boot.img - for RPIBOOT and secure-boot.

rpi-boot-eeprom-recovery-2021-04-29-vl805-000138a1-disk-images

Republish the v2021.04.29-138a1 release as small zipped FAT32 disk images instead of just zipping the recovery.bin files