CCx.cpp

//
// HoneyComm - Alternative RFBee firmware to communicate with
//             HR80 radiator controllers.
//
// Copyright (C) 2011 Wladimir Komarow
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.
//

#include "CCx.h"
#include "CCxCfg.h"
#include "Spi.h"


//---------- constructor ----------------------------------------------------

CCX::CCX(){}

// Power On Reset as described in  19.1.2 of cc1100 datasheet, tried APOR as described in 19.1.1 but that did not work :-(
void CCX::PowerOnStartUp()
{
   Spi.mode((1 << SPR1) | (1 << SPR0));//SPICLK=CPU/64

   // start manual Power On Reset
   Spi.slaveSelect(HIGH);
   delayMicroseconds(1);

   Spi.slaveSelect(LOW);
   delayMicroseconds(10);

   Spi.slaveSelect(HIGH);
   delayMicroseconds(41);

   Spi.slaveSelect(LOW);

   // wait for MISO to go low
   while(digitalRead(MISO_PIN));

   Spi.transfer(CCx_SRES);


   // wait for MISO to go low
   while(digitalRead(MISO_PIN));

   Spi.slaveSelect(HIGH);

}

byte CCX::Read(byte addr,byte* data)
{

   byte result;

   Spi.slaveSelect(LOW);
   // wait for MISO to go low
   while(digitalRead(MISO_PIN));

   result=Spi.transfer(addr | 0x80);
   *data=Spi.transfer(0);

   Spi.slaveSelect(HIGH);
   return result;
}

byte CCX::ReadBurst(byte addr, byte* dataPtr, byte size)
{

   byte result;

   Spi.slaveSelect(LOW);
   // wait for MISO to go low
   while(digitalRead(MISO_PIN));

   result=Spi.transfer(addr | 0xc0);

   while(size)
   {
      *dataPtr++ = Spi.transfer(0);
      size--;
   }

   Spi.slaveSelect(HIGH);

   return result;
}

byte CCX::Write(byte addr, byte dat)
{

   byte result;

   Spi.slaveSelect(LOW);
   // wait for MISO to go low
   while(digitalRead(MISO_PIN));

   result=Spi.transfer(addr);
   result=Spi.transfer(dat);

   Spi.slaveSelect(HIGH);

   return result;
}

byte CCX::WriteBurst(byte addr, const byte* dataPtr, byte size)
{

   byte result;

   Spi.slaveSelect(LOW);
   // wait for MISO to go low
   while(digitalRead(MISO_PIN));

   result=Spi.transfer(addr | 0x40);

   while(size)
   {
      result = Spi.transfer(*dataPtr++);
      size--;
   }

   Spi.slaveSelect(HIGH);

   return result;
}

byte CCX::Strobe(byte addr)
{

   byte result;

   Spi.slaveSelect(LOW);
   // wait for MISO to go low
   while(digitalRead(MISO_PIN));

   result=Spi.transfer(addr);

   Spi.slaveSelect(HIGH);

   return result;
}

//configure registers of cc1100 making it work in specific mode
void CCX::Setup(byte configId)
{
   byte reg;
   byte val;
   if (configId < CCX_NR_OF_CONFIGS)
      for(byte i = 0; i< CCX_NR_OF_REGISTERS; i++){
         reg=pgm_read_byte(&CCx_registers[i]);
         val=pgm_read_byte(&CCx_registerSettings[configId][i]);//read flash data no problem
         byte temp = Write(reg,val);
         //Serial.print(temp,HEX);
         //Serial.print(" ");
      }
}


// to aid debugging
//#ifdef DEBUG
void CCX::ReadSetup()
{
   byte reg;
   byte value;
   for(byte i = 0; i< CCX_NR_OF_REGISTERS; i++){
      reg=pgm_read_byte(&CCx_registers[i]);
      Read(reg,&value);
      Serial.print(reg,HEX);
      Serial.print(':');
      Serial.println(value,HEX);
   }
}
//#endif

void CCX::setPA(byte configId,byte paIndex)
{
   byte PAval=pgm_read_byte(&CCx_paTable[configId][paIndex]);
   CCx.Write(CCx_PATABLE,PAval);
}


void CCX::Mode(byte md){

}

byte CCX::NrOfConfigs(){
   return CCX_NR_OF_CONFIGS;
}

byte CCX::RSSIdecode(byte rssiEnc){
   byte rssi;
   byte rssiOffset=74;  // is actually dataRate dependant, but for simplicity assumed to be fixed.

   // RSSI is coded as 2's complement see section 17.3 RSSI of the cc1100 datasheet
   if (rssiEnc >= 128)
      rssi = (( rssiEnc - 256) >> 1) - rssiOffset;
   else
      rssi = (rssiEnc >> 1) - rssiOffset;
   return rssi;
}

//---------- preinstantiate CCx object --------------------------------------

CCX CCx = CCX();