stm32cubeProg does not accept rev3 github artifact

[rusefillc]

github artifact flashed into rev3 board does not blink

rev3 does not have openblt enabled

[dron0gus]

I have rev3 with GD32.
I add elf file to github build artifacts.
I successfully flashed elf file using openocd + gdb from https://github.com/dron0gus/wideband/actions/runs/4455668861 . Works fine.
@rusefillc what tool do you use to flash bin/hex? Trying to find linux tool for DFU flashing...
stm32flash fails to talk to gd32 bootloader:

$ stm32flash /dev/ttyUSB0
stm32flash 0.5

http://stm32flash.sourceforge.net/

Interface serial_posix: 57600 8E1
Failed to init device.

[rusefillc]

• сначала плату нужно запитать пятью вольтами через 2x2 разъём
• потом TC2030 программирование

[rusefillc]

fuck
legacy st-link console command line works - i have blue LED blinking

[rusefillc]

same exact file different software causes issues

Q: why the hell two segments?