Updating Example9_multiSetVal to use the new key names

Author: PaulZC

examples/ZED-F9P/Example9_multiSetVal/Example9_multiSetVal.ino

@@ -67,15 +67,15 @@ void setup()
   //Original: myGPS.enableRTCMmessage(UBX_RTCM_1005, COM_PORT_I2C, 1); //Enable message 1005 to output through I2C port, message every second
 
   //Begin with newCfgValset8/16/32
-  setValueSuccess &= myGPS.newCfgValset8(CFG_MSGOUT_RTCM_3X_TYPE1005_I2C, 1); //Set output rate of msg 1005 over the I2C port to once per measurement (value is 8-bit (U1))
-  //setValueSuccess &= myGPS.newCfgValset8(CFG_MSGOUT_RTCM_3X_TYPE1005_I2C, 1, 7); //Set this and the following settings into Flash/RAM/BBR instead of BBR
+  setValueSuccess &= myGPS.newCfgValset8(UBLOX_CFG_MSGOUT_RTCM_3X_TYPE1005_I2C, 1); //Set output rate of msg 1005 over the I2C port to once per measurement (value is 8-bit (U1))
+  //setValueSuccess &= myGPS.newCfgValset8(UBLOX_CFG_MSGOUT_RTCM_3X_TYPE1005_I2C, 1, 7); //Set this and the following settings into Flash/RAM/BBR instead of BBR
   //Add extra keyIDs and values using addCfgValset8/16/32
-  setValueSuccess &= myGPS.addCfgValset8(CFG_MSGOUT_RTCM_3X_TYPE1077_I2C, 1); //Set output rate of msg 1077 over the I2C port to once per measurement (value is 8-bit (U1))
-  setValueSuccess &= myGPS.addCfgValset8(CFG_MSGOUT_RTCM_3X_TYPE1087_I2C, 1); //Set output rate of msg 1087 over the I2C port to once per measurement (value is 8-bit (U1))
-  setValueSuccess &= myGPS.addCfgValset8(CFG_MSGOUT_RTCM_3X_TYPE1127_I2C, 1); //Set output rate of msg 1127 over the I2C port to once per measurement (value is 8-bit (U1))
-  setValueSuccess &= myGPS.addCfgValset8(CFG_MSGOUT_RTCM_3X_TYPE1097_I2C, 1); //Set output rate of msg 1097 over the I2C port to once per measurement (value is 8-bit (U1))
+  setValueSuccess &= myGPS.addCfgValset8(UBLOX_CFG_MSGOUT_RTCM_3X_TYPE1077_I2C, 1); //Set output rate of msg 1077 over the I2C port to once per measurement (value is 8-bit (U1))
+  setValueSuccess &= myGPS.addCfgValset8(UBLOX_CFG_MSGOUT_RTCM_3X_TYPE1087_I2C, 1); //Set output rate of msg 1087 over the I2C port to once per measurement (value is 8-bit (U1))
+  setValueSuccess &= myGPS.addCfgValset8(UBLOX_CFG_MSGOUT_RTCM_3X_TYPE1127_I2C, 1); //Set output rate of msg 1127 over the I2C port to once per measurement (value is 8-bit (U1))
+  setValueSuccess &= myGPS.addCfgValset8(UBLOX_CFG_MSGOUT_RTCM_3X_TYPE1097_I2C, 1); //Set output rate of msg 1097 over the I2C port to once per measurement (value is 8-bit (U1))
   // Add the final value and send the packet using sendCfgValset8/16/32
-  setValueSuccess &= myGPS.sendCfgValset8(CFG_MSGOUT_RTCM_3X_TYPE1230_I2C, 10); //Set output rate of msg 1230 over the I2C port to once every 10 measurements (value is 8-bit (U1))
+  setValueSuccess &= myGPS.sendCfgValset8(UBLOX_CFG_MSGOUT_RTCM_3X_TYPE1230_I2C, 10); //Set output rate of msg 1230 over the I2C port to once every 10 measurements (value is 8-bit (U1))
 
   if (setValueSuccess == true)
   {