Merge pull request #5 from davideq/main

add wakeup

Author: cparata

README.md

@@ -26,9 +26,11 @@ An instance can be created and enabled when the SPI bus is used following the pr
     Accelero.begin();
     Accelero.Enable_X();
 
-An instance can be created and enabled when the I3C bus is used with SETDASA (static-to-dynamic address assignment):  
+An instance can be created and enabled when the I3C bus is used with SETDASA (static-to-dynamic address assignment): 
+ 
     LIS2DUXS12Sensor Accelero(&I3C, LIS2DUXS12_I3C_ADD_H);
     I3C.resetDynamicAddresses();
+    I3C.isI3CDeviceReady(0x19);
     I3C.assignDynamicAddress(Accelero.getStaticAddress(), LIS2DUXS12_DYNAMIC_ADDRESS);
     Accelero.begin(LIS2DUXS12_DYNAMIC_ADDRESS);
     I3C.setClock(12500000);
@@ -38,6 +40,7 @@ An instance can be created and enabled when the I3C bus is used with ENTDAA (dyn
 
     LIS2DUXS12Sensor Accelero(&I3C);
     I3C.begin(I3C_SDA, I3C_SCL, 1000000U);
+    I3C.isI3CDeviceReady(0x19);
     I3C.discover(devices, 8, &found);
     // find dynAddr by matching LIS2DUXS12_I3C_PID_H in discovered devices
     Accelero.begin(dynAddr);

examples/LIS2DUXS12_Datalog_Terminal_I3C/LIS2DUXS12_Datalog_Terminal_I3C.ino

@@ -36,6 +36,12 @@ void setup()
     Serial.println("resetDynamicAddresses() failed");
     while (1) {}
   }
+  
+  if (!I3C.isI3CDeviceReady(0x19)) {
+    Serial.println("isI3CDeviceReady() failed");
+    while (1) {}
+  }
+  
   if (!I3C.assignDynamicAddress(sensor.getStaticAddress(), LIS2DUXS12_DYNAMIC_ADDRESS)) {
     Serial.println("assignDynamicAddress() failed");
     while (1) {}

library.properties

@@ -1,5 +1,5 @@
 name=STM32duino LIS2DUXS12
-version=1.1.0
+version=1.1.1
 author=SRA
 maintainer=stm32duino
 sentence=Ultra Low Power 3D accelerometer.