protocol.txt

All communication consists of messages that are one line of
human-readable UTF-8 text (with no terminating newline), optionally
followed by a single newline and arbitrary (potentially even binary)
data.

The WebSocket distinction between 'text' and 'binary' frames has no
meaning for us for messages that don't contain additional binary data;
such messages can be either 'binary' or 'text' from the WebSocket
point of view even if we require them (the single line) to be
UTF-8. In other words, an implementation is free to send such a
single-line message as a WebSocket 'binary' frame, and the receiving
implementation must treat that equally as if it was a 'text' frame.

The WebSocket protocol says that 'text' frames are to be "interpreted"
as UTF-8, so it is probably best to indeed use 'binary' frames for
messages that contain optional non-UTF-8 data.

The protocol is not a request-response one. Messages may be sent in
either direction at any time, either in response to some message, or
spontaneously. For 'tile' messages, the client may send a bunch of
tile requests without waiting for return messages. The server may send
tiles proactively (guessing what the client might need). Etc.

The original intent was that the parameters of the messages can be in
any order, as they are in a name=value form anyway and the name
indicates which parameter is which. Sadly, this was not explicitly
mentioned in this document, or tested by unit tests. So now we have
code here and there that assumes that parameters are in a specific
order anyway, thus losing the benefits of the named parameters. Oh
well.

When the document is password protected, it already implies that the
document didn't load, and that with the proper password we should try
again. Similarly for when the password given is wrong. However, if
loading fails and it isn't a password-related failure,
faileddocloading error is returned and in this case the client handles
it as a final error (that requires reloading to retry).

client -> server
================

A convention: Messages that have the first token (keyword) in
UPPERCASE are related to debugging and tracing of the client and
server software and not related to the user's actions.

DEBUG <rest of message>

    The rest of the message (without the DEBUG keyword), possibly
    multiple lines, is logged by the server as LOG_DBG.

ERROR <rest of message>

    The rest of the message (without the ERROR keyword), possibly
    multiple lines, is logged by the server as LOG_ERR.

TRACEEVENT name=<name> ph=<letter> ts=<timestamp> <more parameters>... [ args=<JSON.stringify-string> ]

    Timestamps and durations are in microseconds, from
    performance.now(), multiplied by 1000, and rouded to an integer.

    name is a string of non-space characters.

    ts is the timestamp when the trace event was generated.

    ph is one of the following, and the rest of the parameters depend
    on what it is.

    args is an optional parameter, and its value is a JSON string
    where the keys and values are strings with no spaces in them.

    'i': An "Instant" event.

    'S', 'F': The start and finish of an "Async" event. In addition to
    the name, the messages have an "id" parameter, a unique number
    that must be the same for the 'S' and 'F' messages.

    'X': A "complete" event. The "dur" parameter is the duration
    between the beginning of the thing being timed and the time when
    the 'X' message was emitted, also in microseconds.

canceltiles

    All outstanding tile messages from the client to the server are
    dropped and will not be handled, except tile messages with an id
    parameter. There is no guarantee of exactly which tile: messages
    might still be sent back to the client.

tileprocessed tile=<tileid>

    Previously sent tile (server -> client) arrived and processed by the client.
    Tileid has the next structure : <selected part>:<tile x coord>:<tile y coord>:<tile width in twips>:<tile height in twips>

downloadas name=<fileName> id=<id> format=<document format> options=<SkipImages, etc>

    Exports the current document to the desired format and returns a download URL
    The id identifies the request on the client. id can take following values:
    * 'print': When request for download is basically for print purposes
    * 'slideshow': When request for download is for showing slideshow
    * 'export': Just a simple download

getchildid

    Requests the child id so that it knows where the files needs to be sent when it is
    inserted in the document

gettextselection mimetype=<mimeType>

    Request selection's content, which is returned via 'textselectioncontent', if the selection is text-only and relatively small.
    However, for selections containing images and other embedded objects, or if the selection is a large text blob,
    the response is 'complexselection'.

paste mimetype=<mimeType>
<binaryPasteData>

    Paste content at the current cursor position.

insertfile name=<name> type=<type>

    Inserts the file with the name <name> into the document, we currently
    support:

        type = 'graphic': The file has been previously uploaded using insertfile POST

        type = 'graphicurl': The file is supposed to be downloaded by the core
	                     itself; it does so from the URL provided in 'name'

selectbackground name=<name>

    Inserts a graphic file with the name <name> into the document as background.

key type=<type> char=<charcode> key=<keycode>

    <type> is 'input' or 'up', <charcode> and <keycode> are numbers.

load <pathname>

    Deprecated.

load [part=<partNumber>] url=<url> [timestamp=<time>] [lang=<locale>] [deviceFormFactor=<device type>] [timezone=<timezone>] [options=<options>]

    part is an optional parameter. <partNumber> is a number.

    timestamp is an optional parameter.  <time> is provided in microseconds
    since the Unix epoch - midnight, January 1, 1970.

    lang specifies the locale to which we should switch before loading the
    document

    deviceFormFactor specifies the form factor of the device the client is running on
    it can be one of the following: 'desktop', 'tablet', 'mobile'

    timestamp is in tzfile(5) format. For example: Pacific/Auckland.

    options are the whole rest of the line, not URL-encoded, and must be valid JSON.

coolclient <major.minor[-patch]> [ <timestamp> <perfcounter> ]

    Upon connection, a client must announce the version number it supports.
    major: an integer that must always match between client and server,
           otherwise there are no guarantees of any sensible
           compatibility. This is bumped when API changes.
    minor: an integer is more flexible and is at the discretion of either party.
           Security fixes that do not alter the API would bump the minor version number.
    patch: an optional string that is informational.

    timestamp: the value of the JavaScript Date.now(), i.e. integer number of milliseconds since
           the Unix epoch.

    perfcounter: the value of the JavaScript performance.now() function at the same time.
            This is also in milliseconds but can be a floating point number and can be up to
            microsecond precision.

            The timestamp and perfcounter are used by the server to translate performance
            counter values from the client for Trace Event logging into absolute timestamps.

mouse type=<type> x=<x> y=<y> count=<count>

    <type> is 'buttondown', 'buttonup' or 'move', others are numbers.

ping

    requests a 'pong' server message.

renderfont font=<font> char=<characters>

    requests the rendering of the given font.
    The font parameter is URL encoded
    The char parameter is URL encoded

requestloksession

    requests the initialization of a LOK process in an attempt to predict the user's
    interaction with the document

resetselection

saveas url=<url> format=<format> options=<options>

    <url> is a URL, encoded. <format> is also URL-encoded, i.e. spaces as %20 and it can be empty
    options are the whole rest of the line, not URL-encoded, and can be empty
    If <url> uses 'wopi:' as the protocol, the path is treated as the path on
    the wopi host.

selecttext type=<type> x=<x> y=<y>

    <type> is 'start', 'end' or 'reset', <x> and <y> are numbers.

selectgraphic type=<type> x=<x> y=<y>

    <type> is 'start' or 'end' <x> and <y> are numbers.

setclientpart part=<partNumber>

    Informs the server that the client changed to part <partNumber>.

selectclientpart part=<partNumber>

    Informs the server that the client changed the selection state of <partNumber>.

moveselectedclientparts position=<positionNumber>

    Moves the selected parts to a new position.

setpage page=<pageNumber>

    Valid only for text documents.
    Informs the server that the client changed to page <pageNumber>.

status

styles

tile part=<partNumber> width=<width> height=<height> tileposx=<xpos> tileposy=<ypos> tilewidth=<tileWidth> tileheight=<tileHeight> [timestamp=<time>] [id=<id> broadcast=<yesOrNo>] [oldwid=<wireId>]

    Parameters are numbers except broadcast which is 'yes' or 'no' and
    wireId which is an opaque string identifier unique to this tile.

    Note: id must be echoed back in the response verbatim. It and the
    following parameter, broadcast, are used when rendering slide
    previews of presentation documents, and not for anything else. It
    is only useful to JS part and will break it if not returned in
    the response.

tilecombine <parameters>

    Accepts same parameters as the 'tile' message except that
    parameters 'tileposx', 'tileposy' and 'oldwid are
    comma-separated lists, and the number of elements in each must be
    same.

dialog <command>

    <command> is unique identifier for the dialog that needs to be painted.

uno <command>

    <command> is a line of text.

save dontTerminateEdit=<value> dontSaveIfUnmodified=<value>

    A wrapper over UNO save command. A non-zero <value> is considered true.
    'dontTerminateEdit' means not terminating the edit session in
    spreadsheets when saving the document. In most cases, you should set it to
    non-zero. 'dontSaveIfUnmodified' when set to non-zero skips saving the document when it is
    unmodified.

savetostorage force=<value>

    Saves the files to storage. A 'save' command automatically saves the file to
    storage almost always except in the case where there is a document conflict
    i.e document in the storage is changed behind our back. We might need to do
    call this command with force=1 in that case to forcefully save it to storage
    after asking from the user.

clientvisiblearea x=<x> y=<y> width=<width> height=<height>

    Invokes lok::Document::setClientVisibleArea().

outlinestate type=<type> level=<level> index=<index> state=<state>

    <type> is 'column' or 'row', <level> and <index> are numbers, <state> is 'visible' or 'hidden'.

    Invokes  lok::Document::setOutlineState().

useractive

    Sent when the user regains focus or clicks within the active area to
    disable the inactive state.
    Will send invalidation and update notifications to force refreshing the screen.

    See 'userinactive'.

userinactive

    Sent when the user has switched tabs or away from the Browser altogether.
    It should throttle updates until the user is active again.

    See 'useractive'.

closedocument

    This gives document owners the ability to terminate all sessions currently
    having that document opened. This functionality is enabled only in case WOPI
    host mentions 'EnableOwnerTermination' flag in its CheckFileInfo response

versionrestore <action>

    Version restore related messages.

    <action> can take the following values:
    - prerestore: The storage is about to restore the document to an earlier
    revision.

asksignaturestatus

    Requests a signing status of the document.

signdocument

    Sign the current document with the input certificate and private key.

rendershapeselection mimetype=<mimeType>

    Request rendering of selected shapes into an SVG format.
    By now only SVG mimetype is handled (image/svg+xml)

removesession <viewid>

    Requests the removal of a given view from the document. Lower
    privilege views cannot remove higher ones, eg. a readonly view
    can't remove an editor.

traceeventrecording <start/stop>

    Starts or stops comphelper::TraceEvent recording.

sallogoverride <string>

    Overrides the SAL_LOG value, or stops overriding if no parameter
    or parameter is "default".

loggingleveloverride <default|max|verbose|terse|none|fatal|critical|error|warning|notice|information|debug|trace>

    Override the Online logging level for the thread(s) and Kit
    processes handling this particular client.

    The value is either one of the log level names, or the special
    value "default" (meaning whatever is the log level specified in
    the "logging.level" configuration setting), "verbose", or "terse")
    (meaning the most or least verbose level allowed, the
    "logging.most_verbose_level_settable_from_client" or
    "logging.least_verbose_level_settable_from_client" configuration
    setting).

paintwindow <id> rectangle=<x>,<y>,<width>,<height> dpiscale=<scale>

    Requests painting the area of a window.

    <id> is the window's int ID.

    <x>,<y>,<width>,<height> is the area of the dialog to be rendered.

    <scale> is a scaling factor, e.g. 1 for non-HiDPI.

contentcontrolevent <JSON>
    *Properties:
    type - date,drop-down
    selected:
        - for drop-down: zero based index of item that is selected
        - for date: date which is selected by date picker

server -> client
================

coolserver <coolwsd version> <coolwsd git hash> <major.minor[-patch]>

    Upon connection, the server must announce the version number it supports.
    Major: an integer that must always match between client and server,
           otherwise there are no guarantees of any sensible
           compatibility. This is bumped when API changes.
    Minor: an integer is more flexible and is at the discretion of either party.
           Security fixes that do not alter the API would bump the minor version number.
    Patch: an optional string that is informational.

lokitversion <JSON string>

    JSON string contains version information in format:
    {ProductName: <>, ProductVersion: <>, ProductExtension: <>, BuildId: <>}

    Eg: {"ProductName": "LibreOffice",
         "ProductVersion": "5.3",
         "ProductExtension": ".0.0.alpha0",
         "BuildId": "<full 40 char git hash>"}

osinfo: <string>

    string that contains OS name and version.

clipboardkey: <token>

    Send access token for web clipboard use, may arrive periodically
    Current and previous hash remain valid for that period, always use
    the latest.

contextmenu: <json description of the context menu>

    When the user right-clicks in the document, the content of the context
    menu is sent back via this callback.

    The structure of the context menu is a JSON, and looks like:

        {
            "menu": [
                { "text": "label text1", "type": "command", "command": ".uno:Something1", "enabled": "true" },
                { "text": "label text2", "type": "command", "command": ".uno:Something2", "enabled": "false" },
                { "type": "separator" },
                { "text": "label text2", "type": "menu", "menu": [ { ... }, { ... }, ... ] },
                ...
            ]
        }

downloadas: jail=<jail directory> dir=<a tmp dir> name=<name> port=<port>

    The client should then request http://server:port/jail/dir/name in order to download
    the document

error: cmd=<command> kind=<kind> [code=<error_code>] [params=1,2,3,...,N]
<freeErrorText>

    <command> is the command part of the corresponding client->server
    message that caused the error.

    <command> can also take following values:
    'internal': for errors generated without directly corresponding to a client
    message.
    'storage': for errors pertaining to storage (filesysytem, wopi etc.)

    <kind> is some single-word classification

    <code> (when provided) further specifies the error as forwarded from
    LibreOffice

close: <reason>

    Ask a client to close the websocket connection with <reason>.
    Exactly similar fields are also available in WebSocket protocol's
    CLOSE frame, but some browser implementation (google-chrome) doesn't seem to
    handle that well. This is a temporary application-level close websocket
    to circumvent the same.

    <reason> can have following values:
    * ownertermination - If the session close is due to 'Document owner'
    terminating the session.
    (Document owner is the one who has the file ownership and hence have the
    ability to kill all other sessions if EnableOwnerTermination flag in WOPI
    CheckFileInfo is 'true' (assumed to be 'false' by default).

    * shuttingdown - Sent when the server is going down in a graceful fashion.
    The server doesn't disconnect from clients yet, but starts
    saving document and tearing down internals.

    * recycling - The last message sent from the server when it is gracefully
    shutting down to let clients know they can try connecting
    after a short interval.

    * documentconflict - All sessions of this document are going down
    because file was changed in storage and we want to load the new document
    from the storage.

    * versionrestore payload - Version restore message is also sent as part of
      the close frame. See `versionrestore:` message for details.

getchildid: id=<id>

    Returns the child id

invalidatetiles: part=<partNumber> x=<x> y=<y> width=<width> height=<height>

    All parameters are numbers. Tells the client to invalidate any
    cached tiles for the document area specified (in twips), at any
    zoom level.

invalidatetiles: EMPTY
invalidatetiles: EMPTY, <partNumber>

    Tells the client to invalidate all cached tiles.

pong rendercount=<num>

    sent in reply to a 'ping' message, where <num> is the total number
    of rendered tiles of the document.

saveas: url=<url> name=<name>

    <url> is a wopi URL of the newly created file, including the access token.
    <name> is the resulting name (without path) that was created on the wopi
    host. It can differ from what was requested in case the file already existed.

status: type=<typeName> parts=<numberOfParts> current=<currentPartNumber> width=<width> height=<height> viewid=<viewId> hiddenparts=<part1,part2,...> selectedparts=<part1,part2,...> [partNames]

    <typeName> is 'text, 'spreadsheet', 'presentation', 'drawing' or 'other. Others are numbers.
    if the document has multiple parts and those have names, part names follow separated by '\n'

statusupdate: type=<typeName> parts=<numberOfParts> current=<currentPartNumber> width=<width> height=<height> viewid=<viewId> hiddenparts=<part1,part2,...> selectedparts=<part1,part2,...> [partNames]

    Same as status: but issued whenever the document parts have updated significantly.
    status: implies document loading. statusupdate: is just an update.

styles: {"styleFamily": ["styles in family"], etc. }

statechanged: <key>=<value>

    Notifies client of state changed events of <key>.
    Eg: 'statechanged: .uno:Undo=enabled'

textselectioncontent:

    Current selection's content, only for text-only selections of a reasonably limited size.
    For complex selection and large texts, selectioncontent message is returned.

complexselection:

    Complex selections with embedded objects and large text selections need special export handling.
    This response signifies that the payload is large and/or complex and needs to be retrieved via the clipboard API.

tile: part=<partNumber> width=<width> height=<height> tileposx=<xpos> tileposy=<ypos> tilewidth=<tileWidth> tileheight=<tileHeight> [timestamp=<time>] [wid=<wireId>]
<binaryPngImage>

    The parameters from the corresponding 'tile' command.

    WireId is a monotonically incrementing, unique reference to a
    state of the document on the server, and can be included by
    the client in the next 'tile' message requesting the same tile.

    the tile message has at least one keyframe, followed by any
    number of concatentated compressed deltas.

delta: part=<partNumber> width=<width> height=<height> tileposx=<xpos> tileposy=<ypos> tilewidth=<tileWidth> tileheight=<tileHeight> [timestamp=<time>] [wid=<wireId>]

    A delta command is like a tile: command but the payload is purely
    an incremental patch on top of a previous tile.

commandresult: <payload>
    This is used to acknowledge the commands from the client.
    <payload> is { command: <command name>, success: 'true' }

Each LOK_CALLBACK_FOO_BAR callback except
LOK_CALLBACK_INVALIDATE_TILES causes a corresponding message to the
client, consisting of the FOO_BAR part in lowercase, without
underscore, followed by a colon, space and the callback
payload. (LOK_CALLBACK_INVALIDATE_TILES causes an invalidatetiles:
message as documented above.) For instance:

invalidatecursor: <payload>

    The payload contains a rectangle describing the cursor position
    and the id of the view which triggered the invalidation. JSON payload.

    The communication between the parent process (the one keeping open the
    Websocket connections to the clients) and a child process (handling
    one document through LibreOfficeKit) uses the same protocol, with
    the following additions and changes:

unocommandresult: <payload>

Callback that an UNO command has finished.
See LOK_CALLBACK_UNO_COMMAND_RESULT for details.

invalidateviewcursor:

    Per-view cursor position invalidation. JSON payload.

textviewselection:

    Per-view text selection bounds. JSON payload.

cellviewcursor:

    Per-view cell cursor position. JSON payload.

graphicviewselection:

    Per-view graphic selection. JSON payload.

viewcursorvisible:

    Per-view cursor visible. JSON payload.

viewlock:

    Per-view lock rectangle. JSON payload.

viewinfo: <payload>

    Message is sent everytime there is any change in view information.
    <payload> consists of an array of JSON objects. Structure of JSON
    objects is like : {"id": <viewid>, "username": <Full Name of the user>}

redlinetablechanged:

    Signals that the redlines table has been modified.
    Redlines are used for tracking changes.

comment:

    Signals that comment has either been added, removed or modified. See
    LOK_CALLBACK_COMMENT for JSON structure.

celladdress: <payload>

    Message is sent anytime the content of the address input box should be updated.
    The <payload> is a string representing the new content.

stats: <key> <value>

    Contains statistical data. Eg: 'stats: wopiloadduration 5' means that
    wopi calls made in loading of document took 5 seconds.

perm: <permission>

    <permission> can be one of 'edit', 'view', 'readonly'. Client must
    change the UI accordingly (disabling buttons etc.)

wopi: <JSON>

     Sent only in case storage is WOPI. Contains WOPI related
     capabilities/information for JS part to act accordingly.

     Properties mentioned:
     + PostMessageOrigin: See WOPI specs for more information
     + HideSaveOption: (boolean): If Collabora Online should hide the save options
     + HidePrintOption: (boolean): If Collabora Online should hide print options
     + HideExportOption: (boolean): If Collabora Online should hide the export options
       this implies 'Download as' options in file menu
     + HideRepairOption: (boolean): If Collabora Online should hide the Repair
       undo functionality

versionrestore: <action>

     Possible values for <action>:

     - prerestore_ack: The host can go ahead with restoring the document to an
       earlier revision.

clipboardchanged: <selection>

    Sent when the content of the internal clipboard has changed.

context: <applicationId> <context>

    Sent when the editing context changes in the application; like when the
    user switches from editing a textframe to editing a graphic object, etc.
    Can be used eg. for contextual change of the toolbars.

signaturestatus: <sign status>
    Possible values:
        0xffff - Unknown
        0 - NOSIGNATURES
        1 - OK
        2 - BROKEN
        3 - INVALID (signature is OK, but doc is modified now)
        4 - NOTVALIDATED (signature is OK, but certificate could not be validated)
        5 - PARTIAL_OK (signature and certificate are ok, but not all files are signed - old documents only)

shapeselectioncontent: <content>

    Current selection's content

mobile: <event>

    Available only in the mobile (Android and iOS) apps.  When you send
    'mobile: eventname', the socket code will fire a 'eventname' event on the
    map.

windowpaint: id=<id> width=<width> height=<height> rectangle=<x>,<y>,<width>,<height> hash=<hash> nopng

    Sent to the client when the server rendered the bitmap of a dialog.

    <id> is the window's int ID.

    <width> is the pixel width of the returned bitmap.

    <height> is the pixel height of the returned bitmap.

    <x>,<y>,<width>,<height> is the rendered area of the dialog

    <hash> is the hash key of this bitmap in the pixmap cache

    nopng appears when the the bitmap was already in the cache, so no PNG
    encoding happened.

contentcontrol: <JSON>
    *Properties
        - action - show, hide, change-picture
        - rectangles - rectangle coordinates (x-coordinate, y-coordinate, width, height)
        - date - boolean to indicate date content control
        - items - array of items for dropdown


child -> parent
===============

curpart: part=<partNumber>

    Sent to the parent process before certain messages that the parent
    needs to act on in addition to passing them on to the client, like
    invalidatetiles:

errortoall: cmd=<command> kind=<kind> [code=<error_code>]

    Causes the parent to send the corresponding error: message to all
    clients.

saveas: url=<url> filename=<filename>

    <url> is a URL of the destination, encoded. Sent from the child to the
    parent after a saveAs() completed.
    <filename> is the resulting jailed filename of the newly created file.

client-<sessionId> <Payload Message>

    Forwarding message between a child and its parent session.
    The payload message is forwarded to the ClientSession.

procmemstats: pid=<pid> pss=<pss in kb> dirty=<private dirty in kb>

    Memory information sent periodically to parent process by each of
    the kit processes.

clipboardcontent:

     in reply to a getclipboard: message.

     mime_type\n
     length\n
     <binary selection content>
     ...

traceevent:
forcedtraceevent:

     Followed by a number of lines consisting of Chrome Trace Event
     formatted data recorded by the comphelper::TraceEvent API in the
     core parts of the kit process.

     The forcedtraceevent variant causes the data to be written to the
     output file even if Trace Event recording is not turned on at the
     moment. This is for metadata information.

parent -> child
===============

child-<sessionId> <Payload Message>

    Forwarding message between a parent and its child session.
    The payload message is forwarded to the ChildSession.

child-<sessionId> getclipboard:

     fetches the complete clipboard for this view and returns
     a clipboardcontent message.

child-<sessionId> setclipboard:

     Sets the clipboard content for this view.

     mime_type\n
     length\n
     <binary selection content>
     ...

disconnect

    Signals to the child that the client for the respective connection
    has disconnected.

exit

    Signals to the child that the process must end and exit.


Admin console
===============

Client can query admin console to get information about currently opened
documents. Following information about the document is exposed:

* PID of the process hosting the document
* Number of client views opening this document
* Name of the document (URL encoded)
* Memory consumed by the process (in kilobytes)
* Elapsed time since first view of document was opened (in seconds)

Admin console can also opt to get notified of various events on the server. For
example, getting notified when a new document is opened or closed. Notifications
are commands sent from server to the client over established websocket.

Before doing anything, clients must authenticate by providing an auth token with
'auth' command.

client -> admin
==============

auth jwt=<jwtToken>

    Authenticate the client with provided jwtToken. This is necessary before any
    other command.

subscribe <space separated list of commands>

    Where list of commands are the ones that client wants to get notified
    about. For eg. 'subscribe adddoc rmdoc'

version

    Queries the server for current version of lokit and coolserver. See
    'lokitversion' and 'coolserver' in admin -> client for the format of
    response message.

documents

    Queries the server for list of opened documents. See `documents` command
    in admin -> client section for format of the response message

history

    Queries the server for list of opened and expired documents with their
    snapshots. Returns a json object and it looks like:

    { "History" :
            {
                "documents": [
                    {
                        "filename":"hello-world.odt",
                        "start":1492104619,
                        "end":1492104680,
                        "pid":12302,
                        "snapshots": [
                            {
                                "creationTime":1492104619,
                                "memoryDirty":0,
                                "activeViews":1,
                                "views":["0008", ...],
                                "lastActivity":1492104619
                            },
                            {
                            ...
                            }
                        ]
                    },
                    {
                    ...
                    }
                ],
                "expiredDocuments" : [...]
            }
    }

mem_consumed
sent_bytes
recv_bytes

    Queries for total memory or bandwidth being consumed by the server
    in kilobytes. For mem_consumed this includes processes - coolwsd,
    coolforkit, and child processes hosting various documents. For
    sent/recv_bytes this includes only external traffic.

active_docs_count

    Returns total number of documents opened

active_users_count

    Returns total number of users connected. This is a summation of number
    of views opened of each document.

settings

    Queries the server for configurable settings from admin console.

log_lines
    Gets last n lines from "coolwsd.log" file.

channel_list
    Gets the log channels list with their respective log levels.

update-log-levels
    Updates the log channels' log levels with the given log levels. Format is: "update-log-levels channel1name=loglevel channel2name=loglevel".

set <setting1=value1> <setting2=value2> ...

    Sets a particular setting (must be one returned as response to
    `settings` command) to value.

    There are only 4 configurable settings as of now.

    mem_stats_size: Number of memory consumed values that server caches
    atmost.
    mem_stats_interval: Time after which server calculates its total memory
    consumption
    cpu_stats_size: Number of cpu usage values that server caches atmost.
    cpu_stats_interval: Time after which server calculates its total cpu
    usage.

    Note: cpu stats gathering is a TODO, so  not functional as of now.

kill <pid>

     <pid> process id of the document to kill. All sessions of document would be
     killed. There is no way yet to kill individual sessions.

admin -> client
===============

Commands marked with [*] are notifications that are delivered only if client is
subscribed to these commands using `subscribe` (see client->admin
section). Others are just response messages to some client command.

[*] adddoc <pid> <filename> <viewid> <memory consumed>

    <pid> process id hosting the document
    <filename> URL encoded name of the file
    <viewid> string identifying the view of this document
    <memory consumed> RSS of <pid> in kilobytes

[*] rmdoc <pid> <viewid>

    <pid> process id hosting the document
    <viewid> view which was closed

[*] mem_stats <memory consumed>

    <memory consumed> in kilobytes sent from admin -> client after every
    mem_stats_interval (see `set` command for list of settings)

[*] propchange <pid> <property> <new-value>

    Notifies of a property change on a pid's property. Properties can
    include:
       "mem" <memory consumed> - in kilobytes of the process.

[*] resetidle <pid>

    <pid> process id hosting the document
    reset the idle time counter for the document

[*] updateroutetoken <JSON string>

    <JSON string> contains the map of serverId as key and routeToken as value

[*] routing_rmdoc <wopiSrc>

    <wopiSrc> of the document that is getting removed, fired when all the views gets expired

    note: This might get additional parameters in future

InvalidAuthToken

    This is sent when invalid auth token is provided in 'auth' command. See
    above.

NotAuthenticated

    When client sends an admin command that requires authentication.

documents <pid> <filename> <number of views> <memory consumed> <elapsed time> <idle time>
<pid> <filename> ....
...

    <elapsed time> is in seconds since the first view of the document was opened
    <idle time> is in seconds since some user did something in his view of the document (even just moving
        the insertion cursor)
    <number of views> Number of users/views opening this(<pid>) document
    Other parameters are same as mentioned in `adddoc`

    Each set document attributes is separated by a newline.

mem_consumed <memory>
    Total memory being consumed by Collabora Online.
total_avail_mem <memory>
    Total memory available to whole Collabora Online. This takes into account
    the memproportion setting, if set by the user, when calculating the amount
    of memory available to the process.

sent_bytes <memory>
recv_bytes <memory>

    <memory> in kilobytes

active_docs_count <count>

active_users_count <count>

settings <setting1=value1> <setting2=value2> ...

    Current value of each configurable setting.

mem_stats <comma separated list of memory consumed values>

     The length of the list is equal to the value of setting
     mem_stats_size`

coolserver <JSON string>

    The returned JSON string contains information in the following format:
    {Version: <>, Hash: <>}

    Eg: {"Version": "master..",
         "Hash": "4897710"}

lokitversion <JSON string>

    JSON string contains version information in format:
    {ProductName: <>, ProductVersion: <>, ProductExtension: <>, BuildId: <>}

    Eg: {"ProductName": "LibreOffice",
         "ProductVersion": "5.3",
         "ProductExtension": ".0.0.alpha0",
         "BuildId": "<full 40 char git hash>"}