homeworks QS

[sergiobaiao]

hi there,

i just made pylutron working with my lutron homeworksQS setup. The only change i made was in init.py, where i changed GNET for QNET. The commands are all the same, both platforms rely on lutron QS Control Protocol. Can you include this on a future release so it can work with both systems?

[fl0zan0]

any news about that ?

[txwindsurfer]

I did the same and Hass now works great with HomeworksQS. You have to do a custom install however since this file isn't editable in hass.io

[fl0zan0]

Thank you very much Best regards

…

Le 2 déc. 2018 à 21:30, txwindsurfer ***@***.***> a écrit : I did the same and Hass now works great with HomeworksQS. You have to do a custom install however since this file isn't editable in hass.io — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#13 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AHBT9jNbQNh_GOjrkFu7nVcHi53CRpz6ks5u1DhXgaJpZM4TEL-N>.

[awrede]

#22 should handle this

[txwindsurfer]

Has #22 been closed? Doesn't appear that the code has been added to the base.

[txwindsurfer]

I am using Homeworks QS. Just FYI, the latest pylutron code works without hanging and without changing the prompt from GNET to QNET.

[teich]

Can confirm with a clean install of HassIO and HomeAssistant 0.101.3 Homeworks QS is working great with no s/G/Q needed. Thanks to however this got resolved!

[thecynic]

Bleh, that's actually a bug :-)

When I added timeouts to the code to handle connection drops, I inadvertently allowed it to just timeout on reading the prompt. So, it works because the repeater doesn't fail to connect us when user/pw is right :-)

I'll fix that to report errors correctly but will also add support for QS when I do.

[Unseen88]

@teich so you are saying if i do a clean hassio install above 0.101.3 and by using https://www.home-assistant.io/integrations/homeworks/ this as integration nothing else editing is required ?

[teich]

Yes, as of now QS works fine, due to the timeout bug above. I've been using hassio for months now without issue.

[rzulian]

@Unseen88 the integration you are referring to is only for series 4 & 8, if you have QS you need this one
https://www.home-assistant.io/integrations/lutron/

BTW: I've just submitted a PR for an improved Homeworks version support