Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Bosch Radiator Thermostat II will not connect properly #432

Closed
dflvunoooooo opened this issue Dec 12, 2022 · 1 comment
Closed

Bosch Radiator Thermostat II will not connect properly #432

dflvunoooooo opened this issue Dec 12, 2022 · 1 comment

Comments

@dflvunoooooo
Copy link

Description of the issue

I tried without any success to connect my new Bosch Radiator Thermostat II (IEEE adress 0xc498860000d4abb2(0x1965)). The yellow led only stops flashing after the five minutes from Z2M are over.

I just switched my Home Assistant addon from normal to dev ago, because with the normal version (1.28.4-1) it wouldn't pair either. Z2M sees the radiator and starts the interview, but after that the only thing in the logs is the "last seen" message. Z2M reports this device as "not supported".

206810088-b5c2916f-21f6-4a75-bd87-1637f0aa7d00

Addon version

1.28.4-1 and dev branch

Platform

Home Assistant 2022.12.1
Supervisor 2022.11.2
Operating System 9.3
Frontend 20221208.0 - latest

Logs of the issue (if applicable)

Zigbee2MQTT:info 2022-12-12 11:34:47: Device '0xc498860000d4abb2' joined
Zigbee2MQTT:info 2022-12-12 11:34:47: MQTT publish: topic 'zigbee2mqtt/bridge/event', payload '{"data":{"friendly_name":"0xc498860000d4abb2","ieee_address":"0xc498860000d4abb2"},"type":"device_joined"}'
Zigbee2MQTT:info 2022-12-12 11:34:47: MQTT publish: topic 'zigbee2mqtt/bridge/log', payload '{"message":{"friendly_name":"0xc498860000d4abb2"},"type":"device_connected"}'
Zigbee2MQTT:info 2022-12-12 11:34:47: MQTT publish: topic 'zigbee2mqtt/0xc498860000d4abb2', payload '{"last_seen":"2022-12-12T11:34:47+01:00"}'
Zigbee2MQTT:info 2022-12-12 11:34:47: Starting interview of '0xc498860000d4abb2'
Zigbee2MQTT:info 2022-12-12 11:34:48: MQTT publish: topic 'zigbee2mqtt/bridge/event', payload '{"data":{"friendly_name":"0xc498860000d4abb2","ieee_address":"0xc498860000d4abb2","status":"started"},"type":"device_interview"}'
Zigbee2MQTT:info 2022-12-12 11:34:48: MQTT publish: topic 'zigbee2mqtt/bridge/log', payload '{"message":"interview_started","meta":{"friendly_name":"0xc498860000d4abb2"},"type":"pairing"}'
Zigbee2MQTT:info 2022-12-12 11:34:48: MQTT publish: topic 'zigbee2mqtt/0xc498860000d4abb2', payload '{"last_seen":"2022-12-12T11:34:48+01:00"}'
Zigbee2MQTT:info 2022-12-12 11:34:58: MQTT publish: topic 'zigbee2mqtt/0xc498860000d4abb2', payload '{"last_seen":"2022-12-12T11:34:58+01:00"}'
Zigbee2MQTT:info 2022-12-12 11:34:58: MQTT publish: topic 'zigbee2mqtt/0xc498860000d4abb2', payload '{"last_seen":"2022-12-12T11:34:58+01:00"}'

@dflvunoooooo
Copy link
Author

Found the solution in the normal Z2M git. Here Doc change and the issue.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests

1 participant