Setup procedure

1. Micro SD card image

1. Latest Raspbian.
2. 3 partitions:
   1. OS.
   2. Telemetry.
   3. Camera data (stills, videos).
3. Libraries:
   1. Sensor libraries

      Sensor	Installation	Reference URL	Guide
      CircuitPython	sudo pip3 install Adafruit-Blinka	https://github.com/adafruit/Adafruit_Blinka	https://learn.adafruit.com/circuitpython-on-raspberrypi-linux
      High-accuracy temperature	sudo pip3 install adafruit-circuitpython-tmp117	https://github.com/adafruit/Adafruit_CircuitPython_TMP117	https://learn.adafruit.com/adafruit-tmp117-high-accuracy-i2c-temperature-monitor/python-circuitpython
      Enrironmental	sudo pip3 install adafruit-circuitpython-bme680	https://github.com/adafruit/Adafruit_CircuitPython_BME680	https://learn.adafruit.com/adafruit-bme680-humidity-temperature-barometic-pressure-voc-gas/python-circuitpython
      IMU	sudo pip3 install adafruit-circuitpython-icm20x	https://github.com/adafruit/Adafruit_CircuitPython_ICM20X	https://learn.adafruit.com/adafruit-tdk-invensense-icm-20948-9-dof-imu/python-circuitpython
      Voltage and current	sudo pip3 install adafruit-circuitpython-ina219	https://github.com/adafruit/Adafruit_CircuitPython_INA219	https://learn.adafruit.com/adafruit-ina219-current-sensor-breakout/python-circuitpython

   2. RockBLOCK libraries.
   3. GPS libraries.
   4. Camera?
   5. UPS library.
4. Drivers:
   1. Camera.
5. Configuration:
   1. Adafruit script includes a lot of setup for the RPi.
   2. I2C enable.
   3. Camera enable.
   4. Serial enable.
6. Transfer (R/W) between Micro SD and other storage.

2. Run ground test

Tests if the image has everything set up correctly, including all the components.

3. Flight executive test

1. v0.1: Startup on power on, test power, and shutdown.