simulacra-DM

Dactyl Manuform - Simulacra edition

Bill of materials

• 3D printed matrials
  • Case: Both sides top and bottom - (x2)
  • External tray - (x2)
  • EC11 adapters for rotatry encoders - (x2)
  • OLED cover - (x2)
• 1N4148 diodes - (x64)
• Elite C or Pro Micro controllers - (x2)
• SSD1306 128x32 OLED Display - (x2)
• EC11 rotary encoders - (x2)
• Kailh hot swap sockets - (x62)
• Switches - (x62)
• Keycaps - (x62)
• M4xD6.0xL5.5 brass screw insert - (x10)
• M4 screw / #6-32 x 1/2 IN - (x10)
• TRRS cable
• Single core wire

Setup

Setup QMK build enviroment

1. Setup QMK build environment https://beta.docs.qmk.fm/tutorial/newbs_getting_started#linux-wsl
2. Move simulacra folder into qmk_firmware/keyboards/handwired/

Firmware

Compile and flash the firmware to each side of the keyboard.

After flashing for the first time the Func layer contains a RESET key for each side of the keyboard.

Compile firmware

qmk compile -kb handwired/simulacra -km default -e PREPROCESSOR=RIGHT

qmk compile -kb handwired/simulacra -km default -e PREPROCESSOR=LEFT

Flashing firmware

qmk flash -kb handwired/simulacra -km default -bl dfu-split-right -e PREPROCESSOR=RIGHT

qmk flash -kb handwired/simulacra -km default -bl dfu-split-left -e PREPROCESSOR=LEFT

Keyboard Layout

[_QWERTY] = LAYOUT

[_FUNC] = LAYOUT

[_GAMING] = LAYOUT