Skip to content

Quickstart

Jump to bottom
Mikayla edited this page Dec 17, 2025 · 23 revisions

Was the setup too long and you didn't want to read it?

  1. The installer can be downloaded using wget https://raw.githubusercontent.com/MikaylaFischler/cc-mek-scada/main/ccmsi.lua from GitHub or download from pastebin with pastebin get sqUN6VUb ccmsi.lua. The installer help ccmsi help should give you the information you need to install the applications.

  2. All devices are configured by a toold that can be accessed by running configure, or just run startup and that will launch automatically.

  3. Once everything has been set up, the system can be started and everything will connect if configured and connected correctly.

You can only have one Coordinator and one Supervisor in any one facility system with a maximum of 4 reactor units (each with no more than 2 boilers and no more than 3 turbines).

Setup guides for the devices can be found in this YouTube playlist.

Most errors in configurations and setup will be automatically detected reported on their respective devices, but not all. If you're having issues, check out the full setup guide and jump to the areas you think might help, ask for help on the GitHub discussions, or ask on the Discord. You can also run the Self-Check in the Reactor PLC or RTU Gateway configurator to check configurations and connections of the respective devices.

GLHF

If you need help beyond this wiki, open a support discussion or ask on Discord! If you prefer videos, they can be found on my YouTube channel.

Homepage

  1. User Manual
    1. System Setup Guide
      1. Device Layout
        1. Coordinator Displays
      2. Connecting to Mekanism Machines
      3. Application Installation
        1. Space Requirements
        2. Installation
        3. Updating
        4. Uninstalling
      4. SCADA Network
        1. Network Channels
        2. Network Connectivity
      5. Setup & Configuration
        1. Supervisor Setup
        2. Coordinator Setup
        3. Reactor PLC Setup
        4. RTU Gateway Setup
      6. Initial Startup
    2. Configurator Tools
      1. Supervisor Configurator
      2. Coordinator Configurator
      3. Reactor PLC Configurator
      4. RTU Gateway Configurator
      5. Pocket Configurator
    3. Redstone Waste Setup Guide
    4. TL;DR Quickstart
    5. FAQ and Common Problems
    6. Colorblind Accessibility
    7. Annunciator Panels
    8. Alarms
    9. System Views
      1. Main View Screen
      2. Valve & Flow Screen
      3. Unit View Screens
    10. Operating Procedure
    11. Status Messages
    12. Glossary
  2. Computer Applications
    1. Reactor PLC
      1. Front Panel
      2. Non-Networked Mode
      3. RPS
      4. PLC Emergency Coolant
    2. RTU Gateway
      1. Front Panel
    3. Supervisory Computer
      1. Front Panel
    4. Coordinator Computer
      1. Front Panel
    5. Pocket
      1. Home and Navigation
      2. Connectivity
      3. Main Applications
      4. System Details and Testing
  3. Notable System Components
    1. Co-routine Threading
    2. Project File Layout/Overview
    3. PPM - Protected Peripherals Manager
    4. RSIO - Redstone I/O
    5. Utility Classes
    6. Networking
  4. Notes
    1. Known Issues
    2. Process Closed Loop Controller
    3. Project Files and Layout
    4. Alternative Installation Strategies
  5. Investigations
    1. Startup Rate High
    2. Reactor Temperature Calculation
  6. References & Resources
    1. CC: Tweaked Character Set
    2. Mekanism API Notes
    3. Design & Regulatory References
  7. Legacy
    1. coord.settings File
    2. config.lua Files
      1. Supervisor config.lua
      2. Coordinator config.lua
      3. Reactor PLC config.lua
      4. RTU Gateway config.lua

Clone this wiki locally