wireguard-multipath

Simple UDP proxy that overlays a Wireguard connection giving it multipath capabilities.

How to run

On the server using docker compose you can deploy with this snippet:

wireguard-multipath:
  image: ghcr.io/blokadainfo/wireguard-multipath:latest
  command: ["server"]
  environment:
    WGMP_SERVER_WIREGUARD_ADDR: "<wireguard_server_endpoint>"
  ports:
    - "59501:59501/udp"
  restart: unless-stopped

On the client using docker or podman you can run via cli:

docker run --network=host -e WGMP_CLIENT_SERVER_ADDR="<public_ip_of_the_wgmp_server>:59501" --rm -it ghcr.io/blokadainfo/wireguard-multipath:latest client

On the client you must change the wg0.conf (or whatever your Wireguard client config is named):

• Set MTU to 1404 (16 bytes lower than default 1420, if you had previosly changed MTU to a lower value make sure to decrease it by 16 bytes from the current value)
• Set endpoint to 127.0.0.1:59401

After changing the Wireguard client config, restart the tunnel and enjoy your VPN connection with multipath capabilities!

Acknowledgements

This project is heavily inspired by porech/engarde.

License

This project is licensed under the AGPL-3.0 License. You may choose to use, modify, or distribute this project under the conditions of this license.

By contributing to this project, you agree that your contributions will be licensed under the AGPL-3.0 License.