change(rmt): change rx buffer prints from error to debug (IDFGH-14449)

[swoboda1337]

Description

When using RF it is possible there is a lot of noise. The developer cannot control this noise. Noise could be very long and cause these prints to occur very often. If CONFIG_RMT_ISR_IRAM_SAFE is enabled these prints will be sent over the UART in ISR context. Each print will take a few milliseconds to send at 115200. The result can be system instability because ISRs are blocked for long periods of time. Currently the only work around is to disable all logging or disable UART logging.

Since these are not real errors and occur all the time in noisy environments it would be better to use ESP_DRAM_LOGD instead of ESP_DRAM_LOGE.

Related

Testing

Verified prints are debug now and no longer cause instability.

Checklist

Before submitting a Pull Request, please ensure the following:

• 🚨 This PR does not introduce breaking changes.
• All CI checks (GH Actions) pass.
• Documentation is updated as needed.
• Tests are updated or added as necessary.
• Code is well-commented, especially in complex areas.
• Git history is clean — commits are squashed to the minimum necessary.

[github-actions]

	Messages
📖	🎉 Good Job! All checks are passing!

👋 Hello swoboda1337, we appreciate your contribution to this project!

---

📘 Please review the project's Contributions Guide for key guidelines on code, documentation, testing, and more.

---

🖊️ Please also make sure you have read and signed the Contributor License Agreement for this project.

---

Click to see more instructions ...

This automated output is generated by the PR linter DangerJS, which checks if your Pull Request meets the project's requirements and helps you fix potential issues.

DangerJS is triggered with each push event to a Pull Request and modify the contents of this comment.

Please consider the following:
- Danger mainly focuses on the PR structure and formatting and can't understand the meaning behind your code or changes.
- Danger is not a substitute for human code reviews; it's still important to request a code review from your colleagues.
- To manually retry these Danger checks, please navigate to the Actions tab and re-run last Danger workflow.

Review and merge process you can expect ...

We do welcome contributions in the form of bug reports, feature requests and pull requests via this public GitHub repository.

This GitHub project is public mirror of our internal git repository

1. An internal issue has been created for the PR, we assign it to the relevant engineer.
2. They review the PR and either approve it or ask you for changes or clarifications.
3. Once the GitHub PR is approved, we synchronize it into our internal git repository.
4. In the internal git repository we do the final review, collect approvals from core owners and make sure all the automated tests are passing.
- At this point we may do some adjustments to the proposed change, or extend it by adding tests or documentation.
5. If the change is approved and passes the tests it is merged into the default branch.
5. On next sync from the internal git repository merged change will appear in this public GitHub repository.

Generated by 🚫 dangerJS against 374f6f1

[suda-morris]

sha=374f6f1f2add598a2a84f07e8cd4c7ff9dd0aa92