NSYSU_eCare Project PR

arc_design_contest/2018/NSYSU_eCare/README.md

@@ -0,0 +1,80 @@
+# eCare - The Monitor device for the elderly
+This applcation is designed to support Nursing Aide to **taking care of the elderly.** eCare is using embARC EM Starter Kit with BLE and ad2 pmods. You can observe thorugh our **andorid App** to monitor your **ECG(Electrocardiogram)** or **EMG(Electromyogram)** anywhere.
+Let's us begin introduce eCare with you!
+
+* [Introduction](#introduction)
+* [Hardware and Software Setup](#hardware-and-software-setup)
+	* [Required Hardware](#required-hardware)
+	* [Required Software](#required-software)
+	* [Hardware Connection](#hardware-connection)
+* [User Manual](#user-manual)
+	* [Before Running This Application](#before-running-this-application)
+	* [Run This Application](#run-this-application)
+
+## Introduction
+
+**eCare**
+- The goal is to provide users to monitor their health by the mobile. 
+- We will collect body signal and convert voltage signal to digital signal and then transfer to bluetooth.
+- Finally, user can see the EMG and ECG signal from the mobile
+
+**System Architecture**
+![System](https://imgur.com/ghY7syy.jpg)
+
+**Andorid App**
+- The data that collect from eCare will transmit to the andorid app. you can easily observe ECG and EMG waveform form mobile and it can also be saved as a txt file
+
+![ECG](https://imgur.com/uQ2K9uZ.jpg)
+![EMG](https://imgur.com/TpbTt8X.jpg)
+
+
+
+## Hardware and Software Setup
+
+* Required Hardware
+  - embARC EM Starter
+  - Pmod ble module
+  - Pmod adc module
+  - smartphone(andorid system)
+  - Analog Front End(AFE)
+
+![EM](https://imgur.com/TnxRAPJ.jpg)
+
+* Required Software 
+  - ARC GNU toolset
+  - Serial port terminal such as putty, tera-trem
+  - ExG android app
+
+* Hardware Connection
+  - Connect PmodAD2 to the board at J2 port
+  - Connect the AFE to PmodAD2
+  - Insert HM-10 to the board  and set the board version to arcem11d
+
+![embARC](https://imgur.com/EpYaR3I.jpg)
+
+* Demo Video
+
+[ Demo ][6]
+
+## User Manual
+
+### Before run this application
+
+- Download source code from github, and install app into your smartphone
+- Connect smartphone bluetooth to ble pmod
+
+### Run this application
+
+- Compile the source code in the arc_gnu toolset
+- Download the code into your EMSK Board. Be sure the switch 1 is off state and 2 is ON state(arcem11d configuration)
+- Turn on the ExG andorid app on your smartphone
+- Choose the ble UUID in the app list
+- Finally, place the sensor on your body and you can see the signal on the mobile
+
+
+|  file               |               Function                    |
+| ------------------- | ------------------------------------------|
+|  main.c             |   include ble transfer and adc function   |
+
+
+[6]: https://v.youku.com/v_show/id_XMzcxMzc5ODI0NA==.html?spm=a2h3j.8428770.3416059.1 " Demo "