[Medium] Patch wpa_supplicant for CVE-2023-52160

SPECS/wpa_supplicant/CVE-2023-52160.patch

@@ -0,0 +1,180 @@
+From bd31011dbf906bb0eaf04cefb3076b0472dce422 Mon Sep 17 00:00:00 2001
+From: Sreenivasulu Malavathula <[email protected]>
+Date: Tue, 4 Feb 2025 10:44:41 -0600
+Subject: [PATCH] Address CVE-2023-52160
+
+---
+ src/eap_peer/eap_config.h          |  8 ++++++
+ src/eap_peer/eap_peap.c            | 40 +++++++++++++++++++++++++++---
+ src/eap_peer/eap_tls_common.c      |  6 +++++
+ src/eap_peer/eap_tls_common.h      |  5 ++++
+ wpa_supplicant/wpa_supplicant.conf |  7 ++++++
+ 5 files changed, 63 insertions(+), 3 deletions(-)
+
+diff --git a/src/eap_peer/eap_config.h b/src/eap_peer/eap_config.h
+index 3238f74..047eec2 100644
+--- a/src/eap_peer/eap_config.h
++++ b/src/eap_peer/eap_config.h
+@@ -469,6 +469,14 @@ struct eap_peer_config {
+ 	 * 1 = use cryptobinding if server supports it
+ 	 * 2 = require cryptobinding
+ 	 *
++	 * phase2_auth option can be used to control Phase 2 (i.e., within TLS
++	 * tunnel) behavior for PEAP:
++	 * 0 = do not require Phase 2 authentication
++	 * 1 = require Phase 2 authentication when client certificate
++	 *  (private_key/client_cert) is no used and TLS session resumption was
++	 *  not used (default)
++	 * 2 = require Phase 2 authentication in all cases
++	 *
+ 	 * EAP-WSC (WPS) uses following options: pin=Device_Password and
+ 	 * uuid=Device_UUID
+ 	 *
+diff --git a/src/eap_peer/eap_peap.c b/src/eap_peer/eap_peap.c
+index 12e30df..6080697 100644
+--- a/src/eap_peer/eap_peap.c
++++ b/src/eap_peer/eap_peap.c
+@@ -67,6 +67,7 @@ struct eap_peap_data {
+ 	u8 cmk[20];
+ 	int soh; /* Whether IF-TNCCS-SOH (Statement of Health; Microsoft NAP)
+ 		  * is enabled. */
++	enum { NO_AUTH, FOR_INITIAL, ALWAYS } phase2_auth;
+ };
+
+
+@@ -114,6 +115,19 @@ static void eap_peap_parse_phase1(struct eap_peap_data *data,
+ 		wpa_printf(MSG_DEBUG, "EAP-PEAP: Require cryptobinding");
+ 	}
+
++	if (os_strstr(phase1, "phase2_auth=0")) {
++		data->phase2_auth = NO_AUTH;
++		wpa_printf(MSG_DEBUG,
++			   "EAP-PEAP: Do not require Phase 2 authentication");
++	} else if (os_strstr(phase1, "phase2_auth=1")) {
++		data->phase2_auth = FOR_INITIAL;
++		wpa_printf(MSG_DEBUG,
++			   "EAP-PEAP: Require Phase 2 authentication for initial connection");
++	} else if (os_strstr(phase1, "phase2_auth=2")) {
++		data->phase2_auth = ALWAYS;
++		wpa_printf(MSG_DEBUG,
++			   "EAP-PEAP: Require Phase 2 authentication for all cases");
++	}
+ #ifdef EAP_TNC
+ 	if (os_strstr(phase1, "tnc=soh2")) {
+ 		data->soh = 2;
+@@ -142,6 +156,7 @@ static void * eap_peap_init(struct eap_sm *sm)
+ 	data->force_peap_version = -1;
+ 	data->peap_outer_success = 2;
+ 	data->crypto_binding = OPTIONAL_BINDING;
++	data->phase2_auth = FOR_INITIAL;
+
+ 	if (config && config->phase1)
+ 		eap_peap_parse_phase1(data, config->phase1);
+@@ -454,6 +469,20 @@ static int eap_tlv_validate_cryptobinding(struct eap_sm *sm,
+ }
+
+
++static bool peap_phase2_sufficient(struct eap_sm *sm,
++				   struct eap_peap_data *data)
++{
++	if ((data->phase2_auth == ALWAYS ||
++	     (data->phase2_auth == FOR_INITIAL &&
++	      !tls_connection_resumed(sm->ssl_ctx, data->ssl.conn) &&
++	      !data->ssl.client_cert_conf) ||
++	     data->phase2_eap_started) &&
++	    !data->phase2_eap_success)
++		return false;
++	return true;
++}
++
++
+ /**
+  * eap_tlv_process - Process a received EAP-TLV message and generate a response
+  * @sm: Pointer to EAP state machine allocated with eap_peer_sm_init()
+@@ -568,6 +597,11 @@ static int eap_tlv_process(struct eap_sm *sm, struct eap_peap_data *data,
+ 					   " - force failed Phase 2");
+ 				resp_status = EAP_TLV_RESULT_FAILURE;
+ 				ret->decision = DECISION_FAIL;
++			} else if (!peap_phase2_sufficient(sm, data)) {
++				wpa_printf(MSG_INFO,
++					   "EAP-PEAP: Server indicated Phase 2 success, but sufficient Phase 2 authentication has not been completed");
++				resp_status = EAP_TLV_RESULT_FAILURE;
++				ret->decision = DECISION_FAIL;
+ 			} else {
+ 				resp_status = EAP_TLV_RESULT_SUCCESS;
+ 				ret->decision = DECISION_UNCOND_SUCC;
+@@ -887,8 +921,7 @@ continue_req:
+ 			/* EAP-Success within TLS tunnel is used to indicate
+ 			 * shutdown of the TLS channel. The authentication has
+ 			 * been completed. */
+-			if (data->phase2_eap_started &&
+-			    !data->phase2_eap_success) {
++			if (!peap_phase2_sufficient(sm, data)) {
+ 				wpa_printf(MSG_DEBUG, "EAP-PEAP: Phase 2 "
+ 					   "Success used to indicate success, "
+ 					   "but Phase 2 EAP was not yet "
+@@ -1199,8 +1232,9 @@ static struct wpabuf * eap_peap_process(struct eap_sm *sm, void *priv,
+ static bool eap_peap_has_reauth_data(struct eap_sm *sm, void *priv)
+ {
+ 	struct eap_peap_data *data = priv;
++
+ 	return tls_connection_established(sm->ssl_ctx, data->ssl.conn) &&
+-		data->phase2_success;
++		data->phase2_success && data->phase2_auth != ALWAYS;
+ }
+
+
+diff --git a/src/eap_peer/eap_tls_common.c b/src/eap_peer/eap_tls_common.c
+index c1837db..a53eeb1 100644
+--- a/src/eap_peer/eap_tls_common.c
++++ b/src/eap_peer/eap_tls_common.c
+@@ -239,6 +239,12 @@ static int eap_tls_params_from_conf(struct eap_sm *sm,
+
+ 	sm->ext_cert_check = !!(params->flags & TLS_CONN_EXT_CERT_CHECK);
+
++	if (!phase2)
++		data->client_cert_conf = params->client_cert ||
++			params->client_cert_blob ||
++			params->private_key ||
++			params->private_key_blob;
++
+ 	return 0;
+ }
+
+diff --git a/src/eap_peer/eap_tls_common.h b/src/eap_peer/eap_tls_common.h
+index 9ac0012..3348634 100644
+--- a/src/eap_peer/eap_tls_common.h
++++ b/src/eap_peer/eap_tls_common.h
+@@ -79,6 +79,11 @@ struct eap_ssl_data {
+ 	 * tls_v13 - Whether TLS v1.3 or newer is used
+ 	 */
+ 	int tls_v13;
++
++	/**
++	 * client_cert_conf: Whether client certificate has been configured
++	 */
++	bool client_cert_conf;
+ };
+
+
+diff --git a/wpa_supplicant/wpa_supplicant.conf b/wpa_supplicant/wpa_supplicant.conf
+index 6619d6b..d63f73c 100644
+--- a/wpa_supplicant/wpa_supplicant.conf
++++ b/wpa_supplicant/wpa_supplicant.conf
+@@ -1321,6 +1321,13 @@ fast_reauth=1
+ #	 * 0 = do not use cryptobinding (default)
+ #	 * 1 = use cryptobinding if server supports it
+ #	 * 2 = require cryptobinding
++#	'phase2_auth' option can be used to control Phase 2 (i.e., within TLS
++#	tunnel) behavior for PEAP:
++#	 * 0 = do not require Phase 2 authentication
++#	 * 1 = require Phase 2 authentication when client certificate
++#	   (private_key/client_cert) is no used and TLS session resumption was
++#	   not used (default)
++#	 * 2 = require Phase 2 authentication in all cases
+ #	EAP-WSC (WPS) uses following options: pin=<Device Password> or
+ #	pbc=1.
+ #
+-- 
+2.45.2
+

SPECS/wpa_supplicant/wpa_supplicant.spec

@@ -1,13 +1,14 @@
 Summary:        WPA client
 Name:           wpa_supplicant
 Version:        2.10
-Release:        1%{?dist}
+Release:        2%{?dist}
 License:        BSD
 Vendor:         Microsoft Corporation
 Distribution:   Azure Linux
 Group:          Applications/Communications
 URL:            https://w1.fi
 Source0:        https://w1.fi/releases/%{name}-%{version}.tar.gz
+Patch0:         CVE-2023-52160.patch
 BuildRequires:  libnl3-devel
 BuildRequires:  openssl-devel
 Requires:       libnl3
@@ -95,6 +96,9 @@ EOF
 %{_sysconfdir}/wpa_supplicant/wpa_supplicant-wlan0.conf
 
 %changelog
+* Wed Feb 03 2025 Sreeniavsulu Malavathula <[email protected]> - 2.10-2
+- Patch to fix CVE-2023-52160.
+
 * Wed Jan 26 2022 Neha Agarwal <[email protected]> - 2.10-1
 - Upgrade to v2.10 to resolve CVE-2022-23303 and CVE-2022-23304.
 - License verified.