Teclast P10HD

This device is arm64 A-only, but as explained here on the wiki, the device needs a GSI for A/B device.

Android 10

• AOSP 10.0 v221 GSI
• Lineage OS 17.1 GSI

Steps to install

You need to unlock your bootloader and flash a signed vbmeta image (the device uses dm-verity). You can also use a boot image patched with the latest Magisk Canary build.

The bootloader doesn't accept full-sized images, you need to send it in pieces, with the fastboot option -S XXX. I've found that the size need to be 250M or below.

• reboot to fastboot

• flash this image with the fastboot utility:

  $ fastboot erase system
  $ fastboot -S 250M flash system SYSTEM.img
  $ fastboot reboot
  

• if not upgrading from a previous AOSP GSI, do a factory reset

I've not used TWRP, but it may work with it's flash image mode.

Hardware support

Component	Comment
Camera	Working (front / back)
Speaker / Mic	Working
Bluetooth	Working
WiFi	Working
GPS	Not tested
SIM / Mobile Data / Voice	Not tested
VoLTE	Not tested
SD card	Not tested
Fingerprint	No hardware
NFC	No hardware

Stock ROM

You can check the official Teclast website, and download the ROMs there. Most of them are on pan.baidu.com, but asking the support for another link worked for me.

---

Tested By: c0eos - P10_HD_ROW model N8H3, AOSP 10.0 v221 - 18/07/2020