phil-opp · phil-opp · Feb 16, 2024 · Feb 16, 2024 · Feb 16, 2024
diff --git a/blog/content/edition-2/posts/02-minimal-rust-kernel/index.fa.md b/blog/content/edition-2/posts/02-minimal-rust-kernel/index.fa.md
@@ -414,7 +414,7 @@ pub extern "C" fn _start() -> ! {
 # in Cargo.toml
 
 [dependencies]
-bootloader = "0.9.23"
+bootloader = "0.9"
 ```
 
 افزودن بوت‌لودر به عنوان وابستگی برای ایجاد یک دیسک ایمیج قابل بوت کافی نیست. مشکل این است که ما باید هسته خود را با بوت لودر پیوند دهیم، اما کارگو از [اسکریپت های بعد از بیلد] پشتیبانی نمی‌کند.

diff --git a/blog/content/edition-2/posts/02-minimal-rust-kernel/index.ja.md b/blog/content/edition-2/posts/02-minimal-rust-kernel/index.ja.md
@@ -411,7 +411,7 @@ pub extern "C" fn _start() -> ! {
 # in Cargo.toml
 
 [dependencies]
-bootloader = "0.9.23"
+bootloader = "0.9"
 ```
 
 bootloaderを依存として加えることだけでブータブルディスクイメージが実際に作れるわけではなく、私達のカーネルをコンパイル後にブートローダーにリンクする必要があります。問題は、cargoが[<ruby>ビルド後<rp> (</rp><rt>post-build</rt><rp>) </rp></ruby>にスクリプトを走らせる機能][post-build scripts]を持っていないことです。

diff --git a/blog/content/edition-2/posts/02-minimal-rust-kernel/index.ko.md b/blog/content/edition-2/posts/02-minimal-rust-kernel/index.ko.md
@@ -418,7 +418,7 @@ pub extern "C" fn _start() -> ! {
 # Cargo.toml 에 들어갈 내용
 
 [dependencies]
-bootloader = "0.9.23"
+bootloader = "0.9"
 ```
 
 부트로더를 의존 크레이트로 추가하는 것만으로는 부팅 가능한 디스크 이미지를 만들 수 없습니다. 커널 컴파일이 끝난 후 커널을 부트로더와 함께 링크할 수 있어야 하는데, cargo는 현재 [빌드 직후 스크립트 실행][post-build scripts] 기능을 지원하지 않습니다.

diff --git a/blog/content/edition-2/posts/02-minimal-rust-kernel/index.md b/blog/content/edition-2/posts/02-minimal-rust-kernel/index.md
@@ -403,7 +403,7 @@ Instead of writing our own bootloader, which is a project on its own, we use the
 # in Cargo.toml
 
 [dependencies]
-bootloader = "0.9.23"
+bootloader = "0.9"
 ```
 
 Adding the bootloader as a dependency is not enough to actually create a bootable disk image. The problem is that we need to link our kernel with the bootloader after compilation, but cargo has no support for [post-build scripts].

diff --git a/blog/content/edition-2/posts/02-minimal-rust-kernel/index.ru.md b/blog/content/edition-2/posts/02-minimal-rust-kernel/index.ru.md
@@ -411,7 +411,7 @@ pub extern "C" fn _start() -> ! {
 # in Cargo.toml
 
 [dependencies]
-bootloader = "0.9.23"
+bootloader = "0.9"
 ```
 
 Добавление загрузчика в качестве зависимости недостаточно для создания загрузочного образа диска. Проблема в том, что нам нужно связать наше ядро с загрузчиком после компиляции, но в cargo нет поддержки [скриптов после сборки][post-build scripts].

diff --git a/blog/content/edition-2/posts/02-minimal-rust-kernel/index.zh-CN.md b/blog/content/edition-2/posts/02-minimal-rust-kernel/index.zh-CN.md
@@ -365,7 +365,7 @@ pub extern "C" fn _start() -> ! {
 # in Cargo.toml
 
 [dependencies]
-bootloader = "0.9.23"
+bootloader = "0.9"
 ```
 
 只添加引导程序为依赖项，并不足以创建一个可引导的磁盘映像；我们还需要内核编译完成之后，将内核和引导程序组合在一起。然而，截至目前，原生的 cargo 并不支持在编译完成后添加其它步骤（详见[这个 issue](https://github.com/rust-lang/cargo/issues/545)）。

diff --git a/blog/content/edition-2/posts/09-paging-implementation/index.ja.md b/blog/content/edition-2/posts/09-paging-implementation/index.ja.md
@@ -281,7 +281,7 @@ frame.map(|frame| frame.start_address() + u64::from(addr.page_offset()))
 
 ```toml
 [dependencies]
-bootloader = { version = "0.9.23", features = ["map_physical_memory"]}
+bootloader = { version = "0.9", features = ["map_physical_memory"]}
 ```
 
 この機能を有効化すると、ブートローダは物理メモリの全体を、ある未使用の仮想アドレス空間にマッピングします。この仮想アドレスの範囲をカーネルに伝えるために、ブートローダは**boot information**構造体を渡します。
@@ -291,7 +291,7 @@ bootloader = { version = "0.9.23", features = ["map_physical_memory"]}
 
 `bootloader`クレートは、カーネルに渡されるすべての情報を格納する[`BootInfo`]構造体を定義しています。この構造体はまだ開発の初期段階にあり、将来の[対応していないsemverの][semver-incompatible]ブートローダのバージョンに更新した際には、うまく動かなくなることが予想されます。`map_physical_memory` featureが有効化されているので、いまこれは`memory_map`と`physical_memory_offset`という2つのフィールドを持っています：
 
-[`BootInfo`]: https://docs.rs/bootloader/0.9.3/bootloader/bootinfo/struct.BootInfo.html
+[`BootInfo`]: https://docs.rs/bootloader/0.9/bootloader/bootinfo/struct.BootInfo.html
 [semver-incompatible]: https://doc.rust-lang.org/stable/cargo/reference/specifying-dependencies.html#caret-requirements
 
 - `memory_map`フィールドは、利用可能な物理メモリの情報の概要を保持しています。システムの利用可能な物理メモリがどのくらいかや、どのメモリ領域がVGAハードウェアのようなデバイスのために予約されているかをカーネルに伝えます。これらのメモリマッピングはBIOSやUEFIファームウェアから取得できますが、それが可能なのはブートのごく初期に限られます。そのため、これらをカーネルが後で取得することはできないので、ブートローダによって提供する必要があるわけです。このメモリマッピングは後で必要となります。

diff --git a/blog/content/edition-2/posts/09-paging-implementation/index.md b/blog/content/edition-2/posts/09-paging-implementation/index.md
@@ -278,7 +278,7 @@ We choose the first approach for our kernel since it is simple, platform-indepen
 
 ```toml
 [dependencies]
-bootloader = { version = "0.9.23", features = ["map_physical_memory"]}
+bootloader = { version = "0.9", features = ["map_physical_memory"]}
 ```
 
 With this feature enabled, the bootloader maps the complete physical memory to some unused virtual address range. To communicate the virtual address range to our kernel, the bootloader passes a _boot information_ structure.
@@ -287,7 +287,7 @@ With this feature enabled, the bootloader maps the complete physical memory to s
 
 The `bootloader` crate defines a [`BootInfo`] struct that contains all the information it passes to our kernel. The struct is still in an early stage, so expect some breakage when updating to future [semver-incompatible] bootloader versions. With the `map_physical_memory` feature enabled, it currently has the two fields `memory_map` and `physical_memory_offset`:
 
-[`BootInfo`]: https://docs.rs/bootloader/0.9.3/bootloader/bootinfo/struct.BootInfo.html
+[`BootInfo`]: https://docs.rs/bootloader/0.9/bootloader/bootinfo/struct.BootInfo.html
 [semver-incompatible]: https://doc.rust-lang.org/stable/cargo/reference/specifying-dependencies.html#caret-requirements
 
 - The `memory_map` field contains an overview of the available physical memory. This tells our kernel how much physical memory is available in the system and which memory regions are reserved for devices such as the VGA hardware. The memory map can be queried from the BIOS or UEFI firmware, but only very early in the boot process. For this reason, it must be provided by the bootloader because there is no way for the kernel to retrieve it later. We will need the memory map later in this post.

diff --git a/blog/content/edition-2/posts/09-paging-implementation/index.zh-CN.md b/blog/content/edition-2/posts/09-paging-implementation/index.zh-CN.md
@@ -288,7 +288,7 @@ frame.map(|frame| frame.start_address() + u64::from(addr.page_offset()))
 
 ```toml
 [dependencies]
-bootloader = { version = "0.9.23", features = ["map_physical_memory"]}
+bootloader = { version = "0.9", features = ["map_physical_memory"]}
 ```
 
 启用这个功能后，bootloader 将整个物理内存映射到一些未使用的虚拟地址范围。为了将虚拟地址范围传达给我们的内核，bootloader 传递了一个 _启动信息_ 结构。
@@ -298,7 +298,7 @@ bootloader = { version = "0.9.23", features = ["map_physical_memory"]}
 
 `Bootloader` 板块定义了一个[`BootInfo`]结构，包含了它传递给我们内核的所有信息。这个结构还处于早期阶段，所以在更新到未来的 [semver-incompatible] bootloader 版本时，可能会出现一些故障。在启用 "map_physical_memory" 功能后，它目前有两个字段 "memory_map" 和 "physical_memory_offset"。
 
-[`BootInfo`]: https://docs.rs/bootloader/0.9.3/bootloader/bootinfo/struct.BootInfo.html
+[`BootInfo`]: https://docs.rs/bootloader/0.9/bootloader/bootinfo/struct.BootInfo.html
 [semver-incompatible]: https://doc.rust-lang.org/stable/cargo/reference/specifying-dependencies.html#caret-requirements
 
 - `memory_map`字段包含了可用物理内存的概览。它告诉我们的内核，系统中有多少物理内存可用，哪些内存区域被保留给设备，如VGA硬件。内存图可以从BIOS或UEFI固件中查询，但只能在启动过程的早期查询。由于这个原因，它必须由引导程序提供，因为内核没有办法在以后检索到它。在这篇文章的后面我们将需要内存图。